M2GL010-VFG256 - 12K Cell 1.2V IGLOO2 FPGA | Microchip
MPN: M2GL010-VFG256 ✓ সক্রিয়M2GL010-VFG256 সারাংশ
An FPGA is a programmable semiconductor whose configurable logic blocks, routing fabric, memory resources, and I/O blocks can be programmed after manufacture. Within the semiconductor hierarchy, the M2GL010-VFG256 belongs to the field-programmable logic device and programmable-logic IC classes. Its fourth-generation flash-based IGLOO2 fabric retains the programmed configuration in on-chip flash, allowing the device to operate without a separate configuration PROM.
The principal device characteristics include 12,084 logic elements, operation from a 1.2 V core, 138 I/O, and a 256-pin VFBGA package. The manufacturer describes the IGLOO2 family as being optimized for cost-sensitive applications while retaining on-chip flash, embedded SRAM, communication interfaces, and multiple DMA controllers. These resources support bridging, I/O expansion, data conversion, system management, and secure connectivity.
The device integrates programmable logic with embedded memory and communication-oriented peripherals. On-chip flash provides persistent configuration, while embedded SRAM supports time-critical data handling. DMA controllers allow data to move between peripherals and memory with reduced processor involvement, and programmable I/O can be assigned according to the voltage and interface requirements of the target board.
Typical implementations include industrial control modules, communications equipment, sensor and data-acquisition systems, embedded gateways, and compact control platforms. The low-density 12K-cell resource level is appropriate for designs that need moderate parallelism, bridging, protocol adaptation, or peripheral consolidation without moving to a larger FPGA.
Board design should account for the 1.2 V core supply, associated I/O voltage planning, power sequencing, decoupling, and high-speed routing. The 256-pin VFBGA also requires careful escape routing, via planning, and assembly-process control, so the land pattern and manufacturing process must be developed from the manufacturer’s package documentation rather than approximated.
This product page consolidates the device identity, package information, verified cross-reference candidates, application guidance, and design considerations needed for initial engineering evaluation. It is intended to support faster part selection while preserving the distinction between electrically similar devices and genuinely pin-compatible drop-in replacements.
এর জন্য ড্রপ-ইন বিকল্প M2GL010-VFG256 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible M2GL010-VFG256 (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Configuration Memory, Device Type, Mounting Type, Logic Elements.
M2GL010-VFG256I
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
M2GL010TS-VFG256
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
M2GL010-VFG256 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | IGLOO2 Low-Density FPGA |
| Logic Elements | 12,084 |
| Core Supply Voltage | 1.2 V |
| User I/O Count | 138 |
| প্যাকেজ | 256-pin VFBGA |
| মাউন্টিং টাইপ | Surface Mount |
| Configuration Memory | On-chip flash |
| Compliance | RoHS compliant and lead-free |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
| Halogen-Free Status | unknown |
| লাইফসাইকেল স্ট্যাটাস | In Production |
M2GL010-VFG256 256-pin vfbga পিন কনফিগারেশন গাইড
M2GL010-VFG256 (256-pin vfbga প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি M2GL010-VFG256.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
M2GL010-VFG256 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Control and Automation, Communications Protocol Bridging, Data Acquisition and Signal Conditioning, Embedded System Management, Secure Connectivity Gateways, LED Lighting and Display Control.
Industrial Control and Automation
The M2GL010-VFG256 is suitable for compact industrial controllers that coordinate sensors, actuators, communications, and machine-control logic. Its 12,084 logic elements provide moderate parallel-processing capacity, while 138 user I/O support board-level signal distribution and interface adaptation. The 1.2 V core and on-chip flash configuration suit space-constrained embedded platforms that require the design to retain its configuration after power cycling. Before layout release, verify the selected I/O standards, external interface requirements, operating-temperature grade, and industrial qualification requirements.
সুপারিশকৃত
Communications Protocol Bridging
The M2GL010-VFG256 can implement protocol conversion, framing, buffering, and bus-level arbitration where a microcontroller alone would require additional glue logic. Its programmable fabric is supported by embedded SRAM, on-chip flash, communication interfaces, and DMA controllers, allowing data to move efficiently between serial peripherals and logic resources. The 138 user I/O also provide substantial connectivity for parallel-to-serial conversion and status control. The exact transceiver, voltage, and timing requirements must be matched to the selected companion devices during schematic design.
সুপারিশকৃত
Data Acquisition and Signal Conditioning
The M2GL010-VFG256 can consolidate sampling control, digital filtering, data formatting, and interface conversion in a small data-acquisition design. The 12,084 logic elements are useful for parallel pipelines, while embedded SRAM can support time-sensitive buffering and the DMA controllers can transfer data between peripherals and memory. Its 138 I/O provide ample connections for converters, control signals, and external memories. Signal integrity, input voltage tolerances, converter interface timing, and ground distribution must be evaluated against the complete analog and digital power plan.
সুপারিশকৃত
Embedded System Management
The M2GL010-VFG256 is well suited to power sequencing, reset control, watchdog supervision, health monitoring, and peripheral configuration in embedded systems. Its flash-based IGLOO2 architecture retains the logic configuration in nonvolatile memory, while 138 I/O can support monitoring points, interlock signals, and bus arbitration. A small 256-pin VFBGA also enables compact controller boards, although its fine pitch requires deliberate escape routing and assembly planning. Define startup states, fail-safe behavior, and voltage sequencing before assigning the external pins.
সুপারিশকৃত
Secure Connectivity Gateways
The M2GL010-VFG256 can serve as a hardware-assisted connectivity gateway by implementing protocol conversion, packet filtering, state machines, and I/O isolation between network interfaces and host controllers. The 12,084-cell fabric provides enough parallelism for moderate-rate data processing without requiring a high-density FPGA, and the 1.2 V core supports compact power budgets. On-chip flash preserves the gateway configuration, while 138 I/O and DMA support peripheral connectivity. Security functions, supported interfaces, and clocking assumptions must be verified in the family documentation before deployment.
সুপারিশকৃত
LED Lighting and Display Control
The M2GL010-VFG256 can drive display and lighting systems where synchronized outputs, pattern generation, monitoring, and serial display interfaces are required. Its programmable I/O and 12,084 logic elements support timing engines, dimming logic, fault detection, and control of multiple LED channels, while on-chip flash retains operating patterns. The 256-pin package provides a high connection count for compact multi-channel boards. Confirm I/O drive limits, timing margins, grounding, and high-current LED driver interfaces before assigning outputs.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা M2GL010-VFG256 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | M2GL010-VFG256I | M2GL010TS-VFG256 |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 256-pin VFBGA | 256-pin VFBGA | 256-pin VFBGA |
| Device Family | IGLOO2 Low-Density FPGA | IGLOO2 Low-Density FPGA | IGLOO2 Low-Density FPGA |
| Logic Elements | 12,084 | 12,084 | 12,084 |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V |
| User I/O Count | 138 | 138 | 138 |
| Configuration Memory | On-chip flash | On-chip flash | On-chip flash |
| Ordering or Temperature Suffix | VFG256 | VFG256I | TS-VFG256 |
মূল পার্থক্যসমূহ
- Closest documented same-device option preserves the complete M2GL010 resource profile (বনামM2GL010-VFG256I)
- Uses nonvolatile on-chip flash configuration (বনামM2GL010-VFG256I)
- Provides a compact 256-pin VFBGA implementation of the 12K-cell device (বনামM2GL010TS-VFG256)
ডিজাইন নোট
Plan the 1.2 V core rail and every required I/O supply as a coordinated power tree. Place the core and I/O decoupling capacitors directly beside their associated supply and ground pins, with very short return paths. Validate startup sequencing, voltage tolerances, and power-consumption limits against the manufacturer electrical tables before selecting regulator components; no regulator output should be connected before its required enable or supply condition is satisfied.
Treat the 256-pin VFBGA as a fine-pitch routing problem. Use the official land pattern and ball-map documentation, preserve the manufacturer’s via and solder-mask guidance, and route escape paths before fixing the board outline. Confirm whether the package has an exposed thermal or ground feature and connect it according to the package drawing rather than assuming its identity from similar VFBGA devices.
Do not substitute M2GL010-VFG256I or M2GL010TS-VFG256 solely because the IGLOO2 name and package designation match. Review the ordering information to distinguish commercial, industrial, and extended-temperature terms, then verify the exact pin table, supported I/O standards, and configuration constraints. A valid PCB footprint does not by itself prove that two ordering codes have identical electrical limits.
Assign clock, serial, and other high-speed interface pins from the manufacturer bank and pin-description tables before fixing the schematic. Keep clocks away from noisy power converters and provide a continuous ground reference beneath routed interfaces. Apply source-series termination only where required by the specific interface timing and output characteristics, since indiscriminate series resistance can degrade edge rates and power consumption.
কমপ্লায়েন্স তথ্য
Product listings identify the M2GL010-VFG256 as RoHS compliant and lead-free. The manufacturer listing identifies the M2GL010 family as in production.
