M2GL010-VFG256 - 12K Cell 1.2V IGLOO2 FPGA | Microchip
MPN： M2GL010-VFG256 ✓ 啟用中M2GL010-VFG256 概覽
An FPGA is a programmable semiconductor whose configurable logic blocks, routing fabric, memory resources, and I/O blocks can be programmed after manufacture. Within the semiconductor hierarchy, the M2GL010-VFG256 belongs to the field-programmable logic device and programmable-logic IC classes. Its fourth-generation flash-based IGLOO2 fabric retains the programmed configuration in on-chip flash, allowing the device to operate without a separate configuration PROM.
The principal device characteristics include 12,084 logic elements, operation from a 1.2 V core, 138 I/O, and a 256-pin VFBGA package. The manufacturer describes the IGLOO2 family as being optimized for cost-sensitive applications while retaining on-chip flash, embedded SRAM, communication interfaces, and multiple DMA controllers. These resources support bridging, I/O expansion, data conversion, system management, and secure connectivity.
The device integrates programmable logic with embedded memory and communication-oriented peripherals. On-chip flash provides persistent configuration, while embedded SRAM supports time-critical data handling. DMA controllers allow data to move between peripherals and memory with reduced processor involvement, and programmable I/O can be assigned according to the voltage and interface requirements of the target board.
Typical implementations include industrial control modules, communications equipment, sensor and data-acquisition systems, embedded gateways, and compact control platforms. The low-density 12K-cell resource level is appropriate for designs that need moderate parallelism, bridging, protocol adaptation, or peripheral consolidation without moving to a larger FPGA.
Board design should account for the 1.2 V core supply, associated I/O voltage planning, power sequencing, decoupling, and high-speed routing. The 256-pin VFBGA also requires careful escape routing, via planning, and assembly-process control, so the land pattern and manufacturing process must be developed from the manufacturer’s package documentation rather than approximated.
This product page consolidates the device identity, package information, verified cross-reference candidates, application guidance, and design considerations needed for initial engineering evaluation. It is intended to support faster part selection while preserving the distinction between electrically similar devices and genuinely pin-compatible drop-in replacements.
直接替換替代品，適用於 M2GL010-VFG256 — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： M2GL010-VFG256 （相同外形與佔位） — 差異在於 Package, Configuration Memory, Device Type, Mounting Type, Logic Elements.
M2GL010-VFG256I
✅ 直接替換📋 參考替代品（不在目錄中）
M2GL010TS-VFG256
✅ 直接替換📋 參考替代品（不在目錄中）
M2GL010-VFG256 最大額定值與電氣特性
| Product Type | IGLOO2 Low-Density FPGA |
| Logic Elements | 12,084 |
| Core Supply Voltage | 1.2 V |
| User I/O Count | 138 |
| 封裝 | 256-pin VFBGA |
| 安裝類型 | Surface Mount |
| Configuration Memory | On-chip flash |
| Compliance | RoHS compliant and lead-free |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
| Halogen-Free Status | unknown |
| 生命週期狀態 | In Production |
M2GL010-VFG256 256-pin vfbga 腳位配置指南
M2GL010-VFG256（256-pin vfbga 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： M2GL010-VFG256.
請參閱 資料表 以查看完整腳位配置。
典型應用
M2GL010-VFG256 適用於 6 應用s: Industrial Control and Automation, Communications Protocol Bridging, Data Acquisition and Signal Conditioning, Embedded System Management, Secure Connectivity Gateways, LED Lighting and Display Control.
Industrial Control and Automation
The M2GL010-VFG256 is suitable for compact industrial controllers that coordinate sensors, actuators, communications, and machine-control logic. Its 12,084 logic elements provide moderate parallel-processing capacity, while 138 user I/O support board-level signal distribution and interface adaptation. The 1.2 V core and on-chip flash configuration suit space-constrained embedded platforms that require the design to retain its configuration after power cycling. Before layout release, verify the selected I/O standards, external interface requirements, operating-temperature grade, and industrial qualification requirements.
推薦
Communications Protocol Bridging
The M2GL010-VFG256 can implement protocol conversion, framing, buffering, and bus-level arbitration where a microcontroller alone would require additional glue logic. Its programmable fabric is supported by embedded SRAM, on-chip flash, communication interfaces, and DMA controllers, allowing data to move efficiently between serial peripherals and logic resources. The 138 user I/O also provide substantial connectivity for parallel-to-serial conversion and status control. The exact transceiver, voltage, and timing requirements must be matched to the selected companion devices during schematic design.
推薦
Data Acquisition and Signal Conditioning
The M2GL010-VFG256 can consolidate sampling control, digital filtering, data formatting, and interface conversion in a small data-acquisition design. The 12,084 logic elements are useful for parallel pipelines, while embedded SRAM can support time-sensitive buffering and the DMA controllers can transfer data between peripherals and memory. Its 138 I/O provide ample connections for converters, control signals, and external memories. Signal integrity, input voltage tolerances, converter interface timing, and ground distribution must be evaluated against the complete analog and digital power plan.
推薦
Embedded System Management
The M2GL010-VFG256 is well suited to power sequencing, reset control, watchdog supervision, health monitoring, and peripheral configuration in embedded systems. Its flash-based IGLOO2 architecture retains the logic configuration in nonvolatile memory, while 138 I/O can support monitoring points, interlock signals, and bus arbitration. A small 256-pin VFBGA also enables compact controller boards, although its fine pitch requires deliberate escape routing and assembly planning. Define startup states, fail-safe behavior, and voltage sequencing before assigning the external pins.
推薦
Secure Connectivity Gateways
The M2GL010-VFG256 can serve as a hardware-assisted connectivity gateway by implementing protocol conversion, packet filtering, state machines, and I/O isolation between network interfaces and host controllers. The 12,084-cell fabric provides enough parallelism for moderate-rate data processing without requiring a high-density FPGA, and the 1.2 V core supports compact power budgets. On-chip flash preserves the gateway configuration, while 138 I/O and DMA support peripheral connectivity. Security functions, supported interfaces, and clocking assumptions must be verified in the family documentation before deployment.
推薦
LED Lighting and Display Control
The M2GL010-VFG256 can drive display and lighting systems where synchronized outputs, pattern generation, monitoring, and serial display interfaces are required. Its programmable I/O and 12,084 logic elements support timing engines, dimming logic, fault detection, and control of multiple LED channels, while on-chip flash retains operating patterns. The 256-pin package provides a high connection count for compact multi-channel boards. Confirm I/O drive limits, timing margins, grounding, and high-current LED driver interfaces before assigning outputs.
推薦
推薦產品摘要
工程參考資料，適用於 M2GL010-VFG256 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | M2GL010-VFG256I | M2GL010TS-VFG256 |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 256-pin VFBGA | 256-pin VFBGA | 256-pin VFBGA |
| Device Family | IGLOO2 Low-Density FPGA | IGLOO2 Low-Density FPGA | IGLOO2 Low-Density FPGA |
| Logic Elements | 12,084 | 12,084 | 12,084 |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V |
| User I/O Count | 138 | 138 | 138 |
| Configuration Memory | On-chip flash | On-chip flash | On-chip flash |
| Ordering or Temperature Suffix | VFG256 | VFG256I | TS-VFG256 |
主要差異化特點
- Closest documented same-device option preserves the complete M2GL010 resource profile (對比M2GL010-VFG256I)
- Uses nonvolatile on-chip flash configuration (對比M2GL010-VFG256I)
- Provides a compact 256-pin VFBGA implementation of the 12K-cell device (對比M2GL010TS-VFG256)
設計說明
Plan the 1.2 V core rail and every required I/O supply as a coordinated power tree. Place the core and I/O decoupling capacitors directly beside their associated supply and ground pins, with very short return paths. Validate startup sequencing, voltage tolerances, and power-consumption limits against the manufacturer electrical tables before selecting regulator components; no regulator output should be connected before its required enable or supply condition is satisfied.
Treat the 256-pin VFBGA as a fine-pitch routing problem. Use the official land pattern and ball-map documentation, preserve the manufacturer’s via and solder-mask guidance, and route escape paths before fixing the board outline. Confirm whether the package has an exposed thermal or ground feature and connect it according to the package drawing rather than assuming its identity from similar VFBGA devices.
Do not substitute M2GL010-VFG256I or M2GL010TS-VFG256 solely because the IGLOO2 name and package designation match. Review the ordering information to distinguish commercial, industrial, and extended-temperature terms, then verify the exact pin table, supported I/O standards, and configuration constraints. A valid PCB footprint does not by itself prove that two ordering codes have identical electrical limits.
Assign clock, serial, and other high-speed interface pins from the manufacturer bank and pin-description tables before fixing the schematic. Keep clocks away from noisy power converters and provide a continuous ground reference beneath routed interfaces. Apply source-series termination only where required by the specific interface timing and output characteristics, since indiscriminate series resistance can degrade edge rates and power consumption.
合規資訊
Product listings identify the M2GL010-VFG256 as RoHS compliant and lead-free. The manufacturer listing identifies the M2GL010 family as in production.
