M2GL010-VFG256 - 12K Cell 1.2V IGLOO2 FPGA | Microchip
MPN: M2GL010-VFG256 ✓ Hoạt độngM2GL010-VFG256 Tóm tắt
An FPGA is a programmable semiconductor whose configurable logic blocks, routing fabric, memory resources, and I/O blocks can be programmed after manufacture. Within the semiconductor hierarchy, the M2GL010-VFG256 belongs to the field-programmable logic device and programmable-logic IC classes. Its fourth-generation flash-based IGLOO2 fabric retains the programmed configuration in on-chip flash, allowing the device to operate without a separate configuration PROM.
The principal device characteristics include 12,084 logic elements, operation from a 1.2 V core, 138 I/O, and a 256-pin VFBGA package. The manufacturer describes the IGLOO2 family as being optimized for cost-sensitive applications while retaining on-chip flash, embedded SRAM, communication interfaces, and multiple DMA controllers. These resources support bridging, I/O expansion, data conversion, system management, and secure connectivity.
The device integrates programmable logic with embedded memory and communication-oriented peripherals. On-chip flash provides persistent configuration, while embedded SRAM supports time-critical data handling. DMA controllers allow data to move between peripherals and memory with reduced processor involvement, and programmable I/O can be assigned according to the voltage and interface requirements of the target board.
Typical implementations include industrial control modules, communications equipment, sensor and data-acquisition systems, embedded gateways, and compact control platforms. The low-density 12K-cell resource level is appropriate for designs that need moderate parallelism, bridging, protocol adaptation, or peripheral consolidation without moving to a larger FPGA.
Board design should account for the 1.2 V core supply, associated I/O voltage planning, power sequencing, decoupling, and high-speed routing. The 256-pin VFBGA also requires careful escape routing, via planning, and assembly-process control, so the land pattern and manufacturing process must be developed from the manufacturer’s package documentation rather than approximated.
This product page consolidates the device identity, package information, verified cross-reference candidates, application guidance, and design considerations needed for initial engineering evaluation. It is intended to support faster part selection while preserving the distinction between electrically similar devices and genuinely pin-compatible drop-in replacements.
Bộ thay thế dễ dàng lắp đặt cho M2GL010-VFG256 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với M2GL010-VFG256 (cùng hình factor và footprint) — khác nhau ở Package, Configuration Memory, Device Type, Mounting Type, Logic Elements.
M2GL010-VFG256I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
M2GL010TS-VFG256
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
M2GL010-VFG256 Tỷ lệ tối đa & tính chất điện
| Product Type | IGLOO2 Low-Density FPGA |
| Logic Elements | 12,084 |
| Core Supply Voltage | 1.2 V |
| User I/O Count | 138 |
| Hộp | 256-pin VFBGA |
| Kiểu lắp đặt | Surface Mount |
| Configuration Memory | On-chip flash |
| Compliance | RoHS compliant and lead-free |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
| Halogen-Free Status | unknown |
| Trạng thái vòng đời | In Production |
Hướng dẫn cấu hình chân M2GL010-VFG256 256-pin vfbga
Cấu hình chân cho M2GL010-VFG256 (256-pin vfbga gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho M2GL010-VFG256.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
M2GL010-VFG256 phù hợp cho 6 Áp dụngs: Industrial Control and Automation, Communications Protocol Bridging, Data Acquisition and Signal Conditioning, Embedded System Management, Secure Connectivity Gateways, LED Lighting and Display Control.
Industrial Control and Automation
The M2GL010-VFG256 is suitable for compact industrial controllers that coordinate sensors, actuators, communications, and machine-control logic. Its 12,084 logic elements provide moderate parallel-processing capacity, while 138 user I/O support board-level signal distribution and interface adaptation. The 1.2 V core and on-chip flash configuration suit space-constrained embedded platforms that require the design to retain its configuration after power cycling. Before layout release, verify the selected I/O standards, external interface requirements, operating-temperature grade, and industrial qualification requirements.
Được đề xuất
Communications Protocol Bridging
The M2GL010-VFG256 can implement protocol conversion, framing, buffering, and bus-level arbitration where a microcontroller alone would require additional glue logic. Its programmable fabric is supported by embedded SRAM, on-chip flash, communication interfaces, and DMA controllers, allowing data to move efficiently between serial peripherals and logic resources. The 138 user I/O also provide substantial connectivity for parallel-to-serial conversion and status control. The exact transceiver, voltage, and timing requirements must be matched to the selected companion devices during schematic design.
Được đề xuất
Data Acquisition and Signal Conditioning
The M2GL010-VFG256 can consolidate sampling control, digital filtering, data formatting, and interface conversion in a small data-acquisition design. The 12,084 logic elements are useful for parallel pipelines, while embedded SRAM can support time-sensitive buffering and the DMA controllers can transfer data between peripherals and memory. Its 138 I/O provide ample connections for converters, control signals, and external memories. Signal integrity, input voltage tolerances, converter interface timing, and ground distribution must be evaluated against the complete analog and digital power plan.
Được đề xuất
Embedded System Management
The M2GL010-VFG256 is well suited to power sequencing, reset control, watchdog supervision, health monitoring, and peripheral configuration in embedded systems. Its flash-based IGLOO2 architecture retains the logic configuration in nonvolatile memory, while 138 I/O can support monitoring points, interlock signals, and bus arbitration. A small 256-pin VFBGA also enables compact controller boards, although its fine pitch requires deliberate escape routing and assembly planning. Define startup states, fail-safe behavior, and voltage sequencing before assigning the external pins.
Được đề xuất
Secure Connectivity Gateways
The M2GL010-VFG256 can serve as a hardware-assisted connectivity gateway by implementing protocol conversion, packet filtering, state machines, and I/O isolation between network interfaces and host controllers. The 12,084-cell fabric provides enough parallelism for moderate-rate data processing without requiring a high-density FPGA, and the 1.2 V core supports compact power budgets. On-chip flash preserves the gateway configuration, while 138 I/O and DMA support peripheral connectivity. Security functions, supported interfaces, and clocking assumptions must be verified in the family documentation before deployment.
Được đề xuất
LED Lighting and Display Control
The M2GL010-VFG256 can drive display and lighting systems where synchronized outputs, pattern generation, monitoring, and serial display interfaces are required. Its programmable I/O and 12,084 logic elements support timing engines, dimming logic, fault detection, and control of multiple LED channels, while on-chip flash retains operating patterns. The 256-pin package provides a high connection count for compact multi-channel boards. Confirm I/O drive limits, timing margins, grounding, and high-current LED driver interfaces before assigning outputs.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho M2GL010-VFG256 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | M2GL010-VFG256I | M2GL010TS-VFG256 |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 256-pin VFBGA | 256-pin VFBGA | 256-pin VFBGA |
| Device Family | IGLOO2 Low-Density FPGA | IGLOO2 Low-Density FPGA | IGLOO2 Low-Density FPGA |
| Logic Elements | 12,084 | 12,084 | 12,084 |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V |
| User I/O Count | 138 | 138 | 138 |
| Configuration Memory | On-chip flash | On-chip flash | On-chip flash |
| Ordering or Temperature Suffix | VFG256 | VFG256I | TS-VFG256 |
Bảo phân biệt quan trọng
- Closest documented same-device option preserves the complete M2GL010 resource profile (vsM2GL010-VFG256I)
- Uses nonvolatile on-chip flash configuration (vsM2GL010-VFG256I)
- Provides a compact 256-pin VFBGA implementation of the 12K-cell device (vsM2GL010TS-VFG256)
Ghi chú thiết kế
Plan the 1.2 V core rail and every required I/O supply as a coordinated power tree. Place the core and I/O decoupling capacitors directly beside their associated supply and ground pins, with very short return paths. Validate startup sequencing, voltage tolerances, and power-consumption limits against the manufacturer electrical tables before selecting regulator components; no regulator output should be connected before its required enable or supply condition is satisfied.
Treat the 256-pin VFBGA as a fine-pitch routing problem. Use the official land pattern and ball-map documentation, preserve the manufacturer’s via and solder-mask guidance, and route escape paths before fixing the board outline. Confirm whether the package has an exposed thermal or ground feature and connect it according to the package drawing rather than assuming its identity from similar VFBGA devices.
Do not substitute M2GL010-VFG256I or M2GL010TS-VFG256 solely because the IGLOO2 name and package designation match. Review the ordering information to distinguish commercial, industrial, and extended-temperature terms, then verify the exact pin table, supported I/O standards, and configuration constraints. A valid PCB footprint does not by itself prove that two ordering codes have identical electrical limits.
Assign clock, serial, and other high-speed interface pins from the manufacturer bank and pin-description tables before fixing the schematic. Keep clocks away from noisy power converters and provide a continuous ground reference beneath routed interfaces. Apply source-series termination only where required by the specific interface timing and output characteristics, since indiscriminate series resistance can degrade edge rates and power consumption.
Thông tin tuân thủ
Product listings identify the M2GL010-VFG256 as RoHS compliant and lead-free. The manufacturer listing identifies the M2GL010 family as in production.
