Analog Devices

MAX14800CCM+T - 16-Channel High-Voltage Analog Switch | Analog Devices

MPN: MAX14800CCM+T ✗ জীবনকালের সমাপ্তি
48 ohm Rds(on) QFP Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MAX14800CCM+T সারাংশ

Analog Devices MAX14800CCM+T is a 16-channel, 1:1 analog switch IC designed for high-voltage switching in ultrasonic imaging and printer systems, with 48 ohm on-resistance and low charge injection. The device is supplied in a 48-LQFP 7 x 7 mm surface-mount package. The MAX14800CCM+T suffix identifies the commercial-temperature ordering configuration supplied in tape-and-reel format.

A high-voltage analog switch routes signals between measurement, imaging, and drive circuitry while limiting unwanted charge transfer into sensitive nodes. In the broader semiconductor hierarchy, the MAX14800CCM+T belongs to the analog switch family within interface ICs. These devices are used where a multiplexer or discrete switching network would add excessive component count, leakage paths, or inconsistent channel behavior.

The main functional characteristics are 16 independently controlled switch circuits, 1:1 signal routing, and an on-resistance of 48 ohm. Its low-charge-injection characteristic is especially valuable when switching relatively high-impedance sources, because charge injected into the input/output node can create timing errors or transient measurement offsets. The 48-LQFP package provides a compact surface-mount footprint for multi-channel imaging and printer control boards.

The MAX14800 family was developed for ultrasonic imaging and printer applications, where multiple high-voltage-capable channels are required in a single device. Integrating 16 switch circuits into one package reduces the number of discrete high-voltage switch packages, external routing connections, and associated board-level interconnect requirements. The family also includes related MAX14801, MAX14802, MAX14803, and MAX14803A variants with different protection or discharge features.

Because the MAX14800 is intended to handle high-voltage switching, the complete electrical limits must be checked in the manufacturer datasheet before applying it to a new board. In particular, verify the absolute maximum supply voltage, individual channel voltage rating, allowable input and output voltage, and derating requirements for the selected package. Do not infer those limits from the nominal operating description.

For layout, place the device close to the signals it switches, keep high-voltage and sensitive-signal paths separated, and provide a stable ground reference around the package. Check whether unused channels require defined logic states. After confirming the pin assignment, enable levels, and switching characteristics against the datasheet, the MAX14800CCM+T can support compact multichannel routing in ultrasonic, printer, and related high-voltage interface systems.

This product page combines the confirmed channel count, resistance, package, ordering information, and application context with engineering guidance for PCB implementation, protection, and alternative selection. It is intended to help designers establish whether the device architecture fits before completing detailed schematic and production-release checks.

এর জন্য ড্রপ-ইন বিকল্প MAX14800CCM+T — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible MAX14800CCM+T (একই form factor এবং footprint) — পার্থক্য রয়েছে Number of Channels, Charge Injection, Package, Process Technology, Primary Application.

Analog Devices
Number of Channels: 16 channels
Charge Injection: Low
Package: 48-LQFP (7 mm x 7 mm)
এর সাথে তুলনা করুন MAX14800CCM+T →
Analog Devices
Number of Channels: 16 channels
Package: 48-LQFP, 7 x 7 mm
Process Technology: HVCMOS
এর সাথে তুলনা করুন MAX14800CCM+T →
Analog Devices
Number of Channels: 16 channels
Package: 48-LQFP (7 mm x 7 mm)
Process Technology: HVCMOS
এর সাথে তুলনা করুন MAX14800CCM+T →

MAX14801CCM+T

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Analog Devices
📦 48-LQFP (7 x 7 mm)
16-channel high-voltage analog switch · 16 channels · SPST · Low

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MAX14802CCM+T

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Analog Devices
📦 48-LQFP (7 x 7 mm)
16 channels · SPST · 48 ohm · 2.7 V to 5.5 V · 3500 ns · 0 C to +70 C · HVCMOS · 16-bit shift register

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MAX14803CCM+T

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Analog Devices
📦 48-LQFP (7 x 7 mm)
16 channels · 16 SPST switches · 48 ohm · 2.7 V to 5.5 V · 3500 ns · 3500 ns · -40 C to +85 C · HVCMOS

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MAX14803ACCM+T

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 48-LQFP (7 x 7 mm)
Combines the 35 kohm terminal bleed resistors with the A-version family characteristics

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MAX14800CCM+T সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type 16-channel high-voltage analog switch IC
Number of Channels 16 circuits
Switch Configuration 1:1
On-Resistance 48 ohm
Charge Injection Low charge injection
Number of Terminals 48 terminals
Package Code QFP
Package Type 48-LQFP (7 x 7 mm)
Package Shape Square
মাউন্টিং টাইপ Surface mount
Temperature Grade Commercial

MAX14800CCM+T square পিন কনফিগারেশন গাইড

MAX14800CCM+T (square প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

MAX14800CCM+T-এর জন্য square প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MAX14800CCM+T.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

MAX14800CCM+T এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Ultrasound Imaging Channel Multiplexing, Printhead Signal Routing, High-Voltage Analog Test Routing, Multi-Channel Signal Isolation, Industrial Control Signal Multiplexing, Capacitive Node Switching.

🩺

Ultrasound Imaging Channel Multiplexing

The MAX14800CCM+T fits multichannel ultrasound imaging systems requiring 16 high-voltage-capable switching paths in one package. Its 1:1 architecture and 48 ohm on-resistance align with analog routing networks that connect transmit, receive, or test nodes through a controlled switching matrix. Low charge injection also helps limit unwanted transients on high-impedance sensing nodes. The device can simplify routing compared with 16 discrete switch packages while preserving a compact 48-LQFP 7 x 7 mm footprint. Before finalizing the receiver or transmitter interface, confirm the channel voltage rating, off leakage, switching time, control levels, and power limits against the manufacturer datasheet.

🖨️

Printhead Signal Routing

The MAX14800CCM+T is suitable for printer and printhead systems where many controlled lines must be routed through a compact analog-switch network. Its 16 switch circuits reduce the component and interconnect burden associated with implementing the same channel count with discrete high-voltage switches. The 48 ohm on-resistance provides a defined nominal path for compatible signal loads, while low charge injection limits injected disturbance when the control state changes. Use the family information to establish that the device is appropriate for printer switching, then verify absolute maximum signal voltages, supply limits, and switching behavior against the actual printhead drive levels and timing requirements.

🧰

High-Voltage Analog Test Routing

The MAX14800CCM+T can form the core of a compact analog test-routing matrix when many nodes must be selected under software control. Sixteen 1:1 switch circuits allow a controller to isolate or connect instrumentation paths without requiring a separate discrete relay for every channel. Its low-charge-injection characteristic is beneficial when the destination is a high-impedance detector, while the 48 ohm on-resistance is suitable only when the resulting signal attenuation and drive current remain acceptable. Establish the maximum test voltage, leakage budget, switching duration, and power conditions before using the device outside the intended imaging and printer applications.

🔌

Multi-Channel Signal Isolation

The MAX14800CCM+T is useful when a system needs to isolate multiple analog or high-voltage-capable paths in a shared backplane. Its 16 integrated switch circuits provide a repeatable channel organization in a single 48-LQFP package, reducing board area compared with an equivalent collection of discrete switch packages. The 48 ohm nominal on-resistance must be included in the complete signal-path budget, and off leakage should be checked against the impedance of the connected source. Low charge injection reduces state-transition disturbance, but successful implementation still depends on correct control polarity, defined unused-channel states, and compliance with the complete maximum voltage ratings.

🏭

Industrial Control Signal Multiplexing

The MAX14800CCM+T can support industrial control boards that need several independently routed signal channels and a small component footprint. Its 16-channel 1:1 organization is appropriate for multiplexing control or measurement paths, while the 48-LQFP 7 x 7 mm package simplifies placement on dense equipment boards. The device is not characterized by a universal industrial voltage range, so engineers should treat the ultrasound and printer applications as its defined use cases and verify all absolute maximum ratings for other designs. Add grounding, transient protection, and thermal review as appropriate to the selected protection-family variant and the connected industrial interface.

⚡

Capacitive Node Switching

The MAX14800CCM+T can switch capacitive nodes when the design can manage stored charge through the external circuit, but the MAX14803 and MAX14803A family variants may be more appropriate when automatic terminal discharge is important. The MAX14803 versions integrate 35 kohm bleed resistors on every switch terminal to discharge capacitive loads, whereas the MAX14800 is the base configuration without that stated discharge feature. Selection should therefore begin with the required post-switch voltage, not just the nominal 48 ohm on-resistance. Confirm the resistor effect on signal impedance and the timing of the discharge network in the final application.

What is the MAX14800CCM+T?
The MAX14800CCM+T is a 16-channel, 1:1 high-voltage analog switch IC with 48 ohm on-resistance and low charge injection. According to the MAX14800/MAX14803 family description, the device is intended for ultrasonic imaging and printer applications that require multiple high-voltage switching paths in one package. It is supplied in a 48-LQFP 7 x 7 mm surface-mount package.
Where can I download the MAX14800CCM+T datasheet PDF?
The MAX14800CCM+T datasheet PDF is available through the manufacturer-data link listed on this page. The document identifies the MAX14800 family as low-charge-injection, 16-channel high-voltage analog switches and provides the detailed electrical limits, pin description, switching characteristics, and package information needed for schematic and layout review.
Where can I find the MAX14800CCM+T pinout?
Use the pin-description table and package drawing in the MAX14800/MAX14803 manufacturer datasheet to locate the MAX14800CCM+T pinout. The component has 48 terminals in a 7 x 7 mm LQFP package. Assign every power, ground, control, and analog-switch terminal from that table rather than inferring connections from neighboring MAX14800 family variants.
What are the key specifications of MAX14800CCM+T?
The MAX14800CCM+T provides 16 analog-switch circuits, 1:1 routing, 48 ohm on-resistance, low charge injection, and a 48-terminal LQFP surface-mount package. Its primary applications are ultrasonic imaging and printer systems. The commercial temperature designation is confirmed for the ordering code, while exact supply limits and detailed operating ranges must be taken from the datasheet.
Is the MAX14800CCM+T suitable for ultrasonic imaging equipment?
Yes, the MAX14800CCM+T is explicitly positioned for ultrasonic imaging applications because it combines 16 high-voltage switching channels with low charge injection. Integrating the channels into one 48-LQFP device can simplify channel routing and reduce discrete switch count. Final suitability depends on matching the selected channel voltage, supply, leakage, and timing limits to the imaging front end.
Can the MAX14800CCM+T be used in printer and printhead control systems?
Yes, the MAX14800CCM+T is identified for printer applications in addition to ultrasonic imaging. Its 16-channel architecture is useful when a controller must route multiple analog or high-voltage-capable lines through a compact interface. The design must remain within the datasheet limits for signal amplitude, supply voltage, switching time, and power dissipation.
What is the difference between MAX14800CCM+T and MAX14802CCM+T?
The MAX14802 family variant adds integrated clamping diodes for protection against positive overshoot, while the MAX14800 is the base high-voltage switching configuration without that specified clamp feature. Both use the 48-pin package family and are intended for ultrasonic imaging and printer applications. Confirm the complete pinout and protection requirements in the datasheet before substitution.
What is the difference between MAX14800CCM+T and MAX14803CCM+T?
The MAX14803 family variant includes integrated 35 kohm bleed resistors on each switch terminal to discharge capacitive loads, while the MAX14800 does not carry that specified discharge function. This distinction matters when a switched node can remain charged between operating states. The MAX14803 may therefore be preferable when controlled terminal discharge is required.
When should I choose MAX14800CCM+T over MAX14803CCM+T?
Choose the MAX14800CCM+T when the design needs the base 16-channel high-voltage switching architecture but does not require integrated 35 kohm bleed resistors on every switch terminal. Choose the MAX14803CCM+T family variant when capacitive nodes must be discharged predictably. The decision should be based on the actual residual-voltage behavior of the connected circuit.
Is the MAX14800CCM+T the same as MAX14800CCM?
The MAX14800CCM and MAX14800CCM+T identify the same base device family, while the ordering suffix conventions can indicate different shipment packaging. Do not assume that every symbol with the same electrical suffix is a drop-in replacement without checking reel orientation, terminal dimensions, exposed-pad treatment, and the manufacturer's ordering table. The electrical MPN basis is the MAX14800 in the 48-pin LQFP configuration.
What is the best drop-in replacement for MAX14800CCM+T?
No universal drop-in replacement can be identified without the complete operating requirements and verified pinout. Closest same-family choices include MAX14801CCM+T, MAX14802CCM+T, MAX14803CCM+T, and MAX14803ACCM+T, but each changes protection or discharge behavior. A valid drop-in decision requires identical package geometry, compatible control logic, and compliance with the original channel voltage and timing limits.
What can replace MAX14800CCM+T?
The MAX14801CCM+T, MAX14802CCM+T, MAX14803CCM+T, and MAX14803ACCM+T are same-family candidates to evaluate, but they are not unconditional replacements. MAX14802 changes overvoltage-clamping behavior, while MAX14803 and MAX14803A add terminal-discharge resistors. Confirm pin compatibility, control polarity, absolute maximum ratings, and timing before releasing a substitution.
Is MAX14800CCM+T in stock and what is its lead time?
Current stock and lead-time status should be requested through the Request a Quote form on this page. The commercial ordering designation and surface-mount package are confirmed, but a current manufacturing or inventory commitment should not be inferred from a product listing. Provide the required quantity and preferred delivery schedule when requesting the quotation.
Where can I buy MAX14800CCM+T and what does it cost?
Use the Request a Quote form on this page to obtain current availability, commercial terms, and a quantity-based quotation for MAX14800CCM+T. The exact MPN includes the +T ordering suffix, so the quote request should state MAX14800CCM+T explicitly to avoid ambiguity in package or shipment configuration.
How should the MAX14800CCM+T be laid out for low-noise switching?
Place the MAX14800CCM+T close to the switched and return paths, maintain a continuous ground reference beneath and around the package, and route high-voltage nodes away from sensitive inputs. Keep control traces away from analog terminals, use a low-impedance ground path, and define unused-channel states in the schematic. Validate the final arrangement against the manufacturer pin description and layout guidance.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MAX14800CCM+T — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose MAX14800CCM+T for a 16-channel, 1:1 high-voltage switching design that needs the base MAX14800 configuration and does not require the MAX14802 clamping diodes or the MAX14803-family bleed resistors. MAX14801CCM+T is the closest same-family option to evaluate when its member-specific electrical characteristics better match the intended use, but it is not a universal substitute. Select MAX14802CCM+T when positive-overshoot protection is required, and select MAX14803CCM+T or MAX14803ACCM+T when every switched terminal must include a 35 kohm discharge path. For any candidate, confirm identical pin behavior, control levels, voltage limits, leakage, switching time, package geometry, and thermal performance. The MAX14800CCM+T is most appropriate for ultrasonic imaging and printer routing where its 48 ohm on-resistance, 16-channel integration, and low-charge-injection behavior satisfy the signal-chain requirements.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য MAX14801CCM+T MAX14802CCM+T MAX14803CCM+T MAX14803ACCM+T
Package 48-LQFP (7 x 7 mm) 48-LQFP (7 x 7 mm) 48-LQFP (7 x 7 mm) 48-LQFP (7 x 7 mm) 48-LQFP (7 x 7 mm)
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Number of Channels 16 circuits 16 circuits 16 circuits 16 circuits 16 circuits
Switch Configuration 1:1 1:1 1:1 1:1 1:1
Charge Injection Low charge injection Low charge injection Low charge injection Low charge injection Low charge injection
Primary Applications Ultrasound imaging and printers Ultrasound imaging and printers Ultrasound imaging and printers Ultrasound imaging and printers Ultrasound imaging and printers

মূল পার্থক্যসমূহ

  • Sixteen high-voltage switching channels in one package (বনামMAX14801CCM+T)
  • Distinct overshoot-protection option in the same package family (বনামMAX14802CCM+T)
  • Terminal-discharge option for capacitive loads (বনামMAX14803CCM+T)
  • Low-charge-injection multichannel switching (বনামMAX14803ACCM+T)

ডিজাইন নোট

Do not treat the MAX14800, MAX14802, and MAX14803 family variants as automatic equivalents merely because they share 16 channels and a 48-pin package. MAX14802 adds integrated clamping diodes for positive overshoot, while MAX14803 and MAX14803A add 35 kohm bleed resistors on every switch terminal. Compare those functions with the original circuit requirements, then verify control polarity, pin names, leakage, and absolute maximum voltage limits in the manufacturer datasheet before approving a substitution.

Place the MAX14800CCM+T close to the switched nodes and maintain a low-impedance ground reference around the 48-LQFP footprint. Route analog and control traces away from adjacent high-voltage paths, keep switching-loop area small, and use a solid ground plane where the package pin arrangement permits it. Maintain short return paths for every switched channel so the 48 ohm nominal on-resistance does not combine with excessive trace resistance and introduce channel-to-channel signal imbalance.

Low charge injection does not eliminate all transient errors in a high-impedance measurement node. Minimize capacitance on sensitive terminals, provide a defined bias path, and evaluate switch off leakage against the source impedance. When capacitive loads must discharge predictably, compare the MAX14803 family option with its 35 kohm per-terminal bleed resistors; the resistor may alter signal loading and discharge timing, so verify the complete network rather than selecting it solely by switch resistance.

Confirm the supply range, quiescent current, control-logic levels, and per-channel current limits against the manufacturer datasheet before enabling the switching matrix. Sequence external protection and drive circuitry so the analog terminals cannot exceed their absolute maximum values during power transitions. For high-voltage switching applications, review the complete board insulation, creepage, clearance, and transient environment rather than relying on the package size alone.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

Compliance attributes are not stated in the product information and must be confirmed with the manufacturer before release to a regulated market.

ডেটা যাচাই করা হয়েছে: 2026-11-09 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

MAX14800CCM+T datasheet MAX14800CCM+T specifications MAX14800CCM+T pinout MAX14800CCM+T datasheet pdf Analog Devices MAX14800CCM+T MAX14800 48-LQFP pinout MAX14800CCM+T equivalent MAX14800CCM+T replacement MAX14800CCM+T cross reference MAX14800CCM+T vs MAX14803CCM+T MAX14800CCM+T ultrasound imaging MAX14800CCM+T printer switch MAX14800CCM+T price MAX14800CCM+T stock MAX14800 high-voltage analog switch

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Analog Devices MAX14800CCM+T MAX14800 MAX14801CCM+T MAX14802CCM+T MAX14803CCM+T MAX14803ACCM+T high-voltage analog switch analog switch IC interface IC semiconductor 1:1 switch low charge injection 48 ohm on-resistance 16-channel switching 48-LQFP QFP package family surface-mount package ultrasound imaging printer interface positive-overshoot clamping 35 kohm bleed resistor capacitive-load discharge commercial temperature grade
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন