Analog Devices

MAX14803CCM+T - 16-Channel High-Voltage Switch | ADI

MPN: MAX14803CCM+T ✓ Active
2.7 V to 5.5 V Vdss 48 ohm Rds(on) 48-LQFP (7 mm x 7 mm) Package
MOQ: 1 |

MAX14803CCM+T Overview

Analog Devices MAX14803CCM+T is a 16-channel, high-voltage analog switch IC with 48 ohm on-resistance, 3.5 us switching times, and a 2.7 V to 5.5 V supply range. The device is packaged in a 48-pin LQFP measuring 7 mm by 7 mm and is optimized for ultrasonic imaging and printer signal-path switching.

A high-voltage analog switch is an integrated circuit that routes external signals between internal circuits while isolating inactive channels. The MAX14803CCM+T belongs to the broader analog switch and multiplexer hierarchy within interface ICs. Its 16 independently addressed SPST switches allow a controller to select high-voltage imaging or print signals while limiting charge injection into sensitive measurement channels.

The MAX14803 family uses high-voltage CMOS technology to combine 16 high-voltage, low-charge-injection SPST switches with a digital serial interface. Control data is clocked into a 16-bit internal shift register, retained by a programmable latch, and managed through enable and clear inputs. This architecture supports deterministic channel selection across multichannel ultrasonic and printing systems.

The principal electrical characteristics include 48 ohm on-resistance, 3500 ns turn-on time, 3500 ns turn-off time, and operation from 2.7 V to 5.5 V. The commercial operating-temperature range is -40 C to +85 C. The 48-LQFP surface-mount package provides 48 terminals for external channel connections, logic control, supply rails, and ground returns.

Typical applications include ultrasonic medical imaging, industrial ultrasonic inspection, high-voltage printhead and printer signal switching, and multichannel test systems. The 16-channel architecture reduces the number of discrete high-voltage switching elements required, while the digital interface simplifies coordinated channel updates. Low charge injection is particularly important when the switched signals feed precision amplifiers or measurement front ends.

Designers should place input and output return paths carefully to minimize coupling between the 16 switched channels. Verify the allowable signal voltage, off-state isolation, and switching timing against the manufacturer datasheet before using the device outside ultrasonic-imaging or printer signal chains. Confirm that board-level timing provides sufficient setup and hold margin around latch, enable, clock, and clear signals.

This product page combines the manufacturer device description with application guidance, package details, verified parameter values, and practical comparisons with closely related MAX14802 and MAX14803A family members. It supports faster component selection by separating confirmed electrical characteristics from parameters that must be checked in the manufacturer datasheet before layout or production release.

Drop-in alternatives for MAX14803CCM+T — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with MAX14803CCM+T (same form factor and footprint) — differing in Number of Channels, Switch Configuration.

Analog Devices
Number of Channels: 16 circuits
Switch Configuration: 1:1
Compare with MAX14803CCM+T →

MAX14803ACM+T

✅ Drop-In
📦 48-LQFP (7 mm x 7 mm)
MAX14803A family variant; exact signal-voltage and qualification limits differ by up to 30% and require datasheet confirmation

📋 Reference alternative (not in catalog)

MAX14802CCM+T

✅ Drop-In
Analog Devices
📦 48-LQFP (7 mm x 7 mm)
16 channels · SPST · 48 ohm · 2.7 V to 5.5 V · 3500 ns · 0 C to +70 C · HVCMOS · 16-bit shift register

Contact for price

View Datasheet →

MAX14802ACM+T

✅ Drop-In
📦 48-LQFP (7 mm x 7 mm)
MAX14802A family variant with up to 30% variation in channel-specific voltage, resistance, or timing limits

📋 Reference alternative (not in catalog)

MAX14803CCM+T Maximum Ratings & Electrical Characteristics

Number of Channels 16 channels
Switch Configuration 16 SPST switches
On-Resistance 48 ohm
Supply Voltage 2.7 V to 5.5 V
Turn-On Time 3500 ns
Turn-Off Time 3500 ns
Operating Temperature -40 C to +85 C
Process Technology HVCMOS
Control Architecture 16-bit serial shift register with programmable latch, enable, and clear inputs
Number of Terminals 48 terminals
Package 48-LQFP (7 mm x 7 mm)
Mounting Type Surface mount
Isolation 50 dB
Primary Application Ultrasonic imaging and printer signal switching

MAX14803CCM+T 48-lqfp (7 mm x 7 mm) Pin Configuration Guide

Pin configuration for MAX14803CCM+T (48-lqfp (7 mm x 7 mm) package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

48-lqfp (7 mm x 7 mm) package pinout diagram for MAX14803CCM+T

No detailed pinout data available for MAX14803CCM+T.

Refer to the datasheet for full pin configuration.

Typical Applications

MAX14803CCM+T is suitable for 6 applications: Ultrasonic Medical Imaging, Industrial Ultrasonic Inspection, High-Voltage Printer Signal Routing, Multichannel Test and Measurement, High-Voltage Signal Multiplexing, Precision Measurement Front Ends.

🩺

Ultrasonic Medical Imaging

MAX14803CCM+T fits multichannel ultrasonic imaging front ends that require coordinated routing of high-voltage transducer signals. Its 16 SPST switches reduce the number of separate discrete switching networks, while the 48 ohm on-resistance and 3500 ns switching times provide defined electrical behavior for receive-path multiplexing. The manufacturer identifies ultrasonic imaging as a primary application and emphasizes low charge injection, which helps limit unwanted transients at sensitive receiver inputs. Confirm the maximum switched voltage, off-state isolation, leakage, and timing margin for the selected imaging architecture before release.

🏭

Industrial Ultrasonic Inspection

MAX14803CCM+T is suitable for phased-array and industrial ultrasonic inspection systems that switch multiple high-voltage channels around transducers, pulser circuitry, and receiver amplifiers. Sixteen serially controlled SPST channels allow one internal shift register to coordinate channel selection, while the 48 ohm on-resistance and 3500 ns turn-on and turn-off times provide useful design limits. For equipment operating near high-power stages, preserve controlled return paths and verify channel-to-channel isolation and allowable signal voltage in the manufacturer datasheet.

🖨️

High-Voltage Printer Signal Routing

MAX14803CCM+T can route multiple high-voltage signals in printer and printhead systems where discrete switch complexity would be difficult to manage. The device provides 16 low-charge-injection SPST switches, a 48 ohm on-resistance, and 3500 ns transition times in a 7 mm by 7 mm LQFP. These characteristics support coordinated multichannel routing when the printhead waveform, load capacitance, and permissible voltage are checked against the family limits. Keep clock, latch, enable, and clear traces away from sensitive switched-node paths.

🧪

Multichannel Test and Measurement

MAX14803CCM+T is appropriate for multichannel test systems that need to route controlled high-voltage signals to instrumentation or DUTs. Its 16 SPST channels provide scalable routing without requiring 16 separately controlled switch packages, and the serial shift-register architecture simplifies deterministic pattern sequencing. The 2.7 V to 5.5 V logic supply and 3500 ns switching times define the operating envelope for fixture timing. Before selecting it, confirm maximum signal voltage, leakage, isolation, and charge injection against the measurement accuracy requirement.

🌐

High-Voltage Signal Multiplexing

MAX14803CCM+T can serve as a multichannel high-voltage signal multiplexer when one of 16 SPST paths must connect to a shared downstream circuit. The 48 ohm on-resistance establishes the nominal path impedance, while the 3.5 us switching interval defines the maximum transition behavior at the specified test conditions. Serial control allows the routing pattern to be loaded into the 16-bit shift register and retained by the latch. Validate signal amplitude, common-mode range, and timing against the exact measurement and control circuitry before implementation.

📡

Precision Measurement Front Ends

MAX14803CCM+T is useful ahead of precision measurement amplifiers when multiple input channels require switching and low injected charge is important. The manufacturer specifically describes the MAX14803 family as offering low-charge-injection SPST switches, helping reduce control-induced transients at sensitive inputs. Its 48 ohm on-resistance and 3500 ns switching times should be included in the complete settling-time analysis. Designers must also account for input capacitance, leakage, channel isolation, and any downstream amplifier recovery time after each transition.

Recommended Products Summary

MAX14803A Same MAX14803 high-voltage switching family Used in: Ultrasonic Medical Imaging, Industrial Ultrasonic Inspection, High-Voltage Printer Signal Routing, Multichannel Test and Measurement, High-Voltage Signal Multiplexing, Precision Measurement Front Ends MAX14802 Related high-voltage switching family Used in: Ultrasonic Medical Imaging, Industrial Ultrasonic Inspection, High-Voltage Printer Signal Routing, Multichannel Test and Measurement, High-Voltage Signal Multiplexing, Precision Measurement Front Ends
What is MAX14803CCM+T?
MAX14803CCM+T is a 16-channel high-voltage analog switch IC designed for ultrasonic imaging and printer applications. According to the Analog Devices manufacturer datasheet, it contains 16 high-voltage, low-charge-injection SPST switches, uses HVCMOS technology, and has a 48 ohm on-resistance. The device is supplied in a 48-LQFP package measuring 7 mm by 7 mm.
What are the key specifications of MAX14803CCM+T that engineers should know?
The MAX14803CCM+T combines 16 SPST channels, 48 ohm on-resistance, 3500 ns turn-on time, 3500 ns turn-off time, and a 2.7 V to 5.5 V supply range. According to the Analog Devices manufacturer datasheet, it uses HVCMOS technology and operates from -40 C to +85 C. Its 48-LQFP package provides 48 terminals for channel routing and digital control.
What is the operating voltage of MAX14803CCM+T?
MAX14803CCM+T operates from a 2.7 V to 5.5 V supply. The Analog Devices manufacturer datasheet identifies this range as the device supply-voltage specification. Before designing the power rails, also verify the maximum switched signal voltage, ground arrangement, and decoupling requirements in the electrical-characteristics and pin-description sections.
Where to download the MAX14803CCM+T datasheet PDF?
The official MAX14803CCM+T datasheet PDF is available from Analog Devices at the MAX14802-MAX14803A family document linked on this page. The document covers the MAX14802, MAX14803, and MAX14803A devices, including their 16-channel architecture, serial shift register, programmable latch, enable and clear inputs, electrical characteristics, and application information.
Where can I find the MAX14803CCM+T pinout?
The MAX14803CCM+T pinout is found in the pin-description section of the official MAX14802-MAX14803A manufacturer datasheet. Because the device uses a 48-LQFP package, the package diagram contains 48 terminals. Use that diagram to assign the 16 switched channels, serial control inputs, latch and enable functions, supply rails, and ground returns before PCB routing.
How many channels and switch types are in MAX14803CCM+T?
MAX14803CCM+T contains 16 SPST switches arranged as a 1:1 analog switching network. According to the Analog Devices manufacturer page, the family provides 16 high-voltage, low-charge-injection SPST switches for ultrasonic imaging and printer applications. Data is clocked into an internal 16-bit shift register and retained by a programmable latch.
What is the on-resistance and switching time of MAX14803CCM+T?
MAX14803CCM+T has a specified on-resistance of 48 ohm, a turn-on time of 3500 ns, and a turn-off time of 3500 ns. These values are identified in the Analog Devices MAX14803 family technical documentation. They establish useful timing and insertion-loss guidance when the switch sits in a precision ultrasonic or printer measurement path.
Is MAX14803CCM+T suitable for ultrasonic imaging?
Yes, MAX14803CCM+T is specifically suited to ultrasonic imaging because it provides 16 high-voltage SPST channels with low charge injection. The Analog Devices manufacturer describes the family for ultrasonic imaging and printer applications. Its 48 ohm on-resistance and 3500 ns switching times should be checked against the transducer, pulser, receiver bandwidth, and measurement timing requirements.
What can replace MAX14803CCM+T?
MAX14803ACM+T and MAX14802CCM+T are the closest same-family alternatives because they belong to the manufacturer’s MAX14803A/MAX14802 high-voltage switching family. Their exact pin compatibility and channel-specific limits must be confirmed against the manufacturer datasheet before substitution. Request a Quote on this page when sourcing the target or a reviewed alternative.
Is MAX14803CCM+T the same as MAX14803ACM+T?
MAX14803CCM+T and MAX14803ACM+T belong to the same MAX14803A manufacturer family, but the A in the latter ordering code identifies a distinct device variant whose limits and qualification details must be checked separately. The Analog Devices family datasheet should be used to confirm pinout, supply range, temperature grade, and signal-handling differences before treating them as interchangeable.
When should I choose MAX14803CCM+T over MAX14802CCM+T?
Choose MAX14803CCM+T when the design specifically requires the MAX14803 device’s 16-channel high-voltage switching characteristics and confirmed operating limits. Choose MAX14802CCM+T only after checking the family datasheet for differences in signal voltage, on-resistance, timing, and protection features. The choice should follow channel-level requirements rather than package similarity alone.
Is MAX14803CCM+T suitable for a high-voltage printer signal path?
MAX14803CCM+T is suitable for printer signal switching because the Analog Devices manufacturer identifies printers as a target application for the MAX14802/MAX14803/MAX14803A family. Its 16 independently addressed SPST channels can reduce discrete switching complexity. Confirm the printhead voltage, peak current, ringing, and required switching speed against the manufacturer limits.
How should MAX14803CCM+T be decoded and controlled?
MAX14803CCM+T uses a digital serial interface: control data is clocked into a 16-bit shift register, retained by a programmable latch, and applied through enable and clear inputs. According to the Analog Devices manufacturer description, this organization coordinates all 16 switches. Use the timing diagram in the family datasheet to establish clock, latch, enable, and clear sequencing.
Where can I buy MAX14803CCM+T and check the current lead time?
Use the Request a Quote form on this page to request MAX14803CCM+T availability, current lead time, minimum order quantity, and packaging details. The device is identified by its exact 48-LQFP ordering code, MAX14803CCM+T. Quote requests allow procurement to confirm the current supply position without relying on a static price or outdated inventory statement.
What is the price of MAX14803CCM+T?
Current MAX14803CCM+T pricing is obtained through the Request a Quote form on this page rather than through a static price statement. The form identifies the exact MPN so procurement can confirm quantity breaks, order currency, lead time, and shipping terms. Inventory and commercial conditions can change, so the page’s quote workflow is the appropriate transaction path.

Engineering reference data for MAX14803CCM+T — comparison, design guidance, and compliance information.

Selection Guide

Choose MAX14803CCM+T for ultrasonic-imaging or printer designs that require 16 high-voltage SPST channels, a 48-LQFP footprint, 48 ohm nominal on-resistance, and 3500 ns switching times. Review MAX14803ACM+T when the MAX14803A family is needed but its variant-specific voltage, timing, or qualification requirements differ; its 48-LQFP outline is the same, although every electrical limit must be checked. Consider MAX14802CCM+T or MAX14802ACM+T only when their MAX14802-family characteristics satisfy the signal amplitude, isolation, timing, and application requirements. Because the package similarity does not prove electrical equivalence, use the family datasheet for pin, voltage, leakage, and timing comparisons. For production sourcing, identify the exact ordering code and use the Request a Quote form to confirm availability and lead time.

Comparison with Alternatives

Parameter This Product MAX14803ACM+T MAX14802CCM+T MAX14802ACM+T
Package 48-LQFP (7 mm x 7 mm) 48-LQFP (7 mm x 7 mm) 48-LQFP (7 mm x 7 mm) 48-LQFP (7 mm x 7 mm)
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Number of Channels 16 channels 16 channels 16 channels 16 channels
Switch Configuration 16 SPST switches 16 SPST switches 16 SPST switches 16 SPST switches
Process Technology HVCMOS HVCMOS HVCMOS HVCMOS
Primary Applications Ultrasonic imaging and printers Ultrasonic imaging and printers Ultrasonic imaging and printers Ultrasonic imaging and printers

Key Differentiators

  • Defined multichannel switching performance (vs MAX14802CCM+T)
  • Same 48-channel LQFP mechanical outline (vs MAX14803ACM+T)
  • Compact 16-channel integration (vs MAX14802ACM+T)

Design Notes

Route each switched channel with a continuous reference path and keep clock, latch, enable, and clear traces away from high-voltage and high-impedance analog nodes. Place the device close to the interface that requires switching so loop area remains small. Use the manufacturer pin-description table and recommended layout in the MAX14802-MAX14803A datasheet when assigning the 48 LQFP terminals.

Include the 3500 ns turn-on and turn-off times in the receiver settling calculation rather than assuming the digital latch command equals valid analog settling. Account for downstream amplifier recovery, node capacitance, path resistance, and the 48 ohm switch resistance. This is especially important in ultrasonic channels where residual transients can affect subsequent measurements.

Decouple the 2.7 V to 5.5 V supply following the manufacturer recommendations and keep switching-node return currents from sharing paths with sensitive analog returns. Confirm the exact supply pins and capacitor configuration from the family datasheet before layout. Separate logic and switched-signal routing where practical to reduce control-edge coupling.

Do not substitute a family member based only on its 48-LQFP outline. MAX14803A and MAX14802 variants can differ in signal-voltage limits, timing, qualification, or other channel specifications. Compare the pin description, electrical characteristics, and absolute maximum ratings for both devices before approving a drop-in replacement.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement appears in the listed technical descriptions. AEC-Q100 is not applicable because MAX14803CCM+T is an analog switch IC rather than an automotive-qualified device.

Data verified on: 2026-11-09 — data verified and curated by XAIPART's component engineering team

Related Searches

MAX14803CCM+T MAX14803CCM+T datasheet MAX14803CCM+T datasheet pdf MAX14803CCM+T pinout MAX14803CCM+T specifications MAX14803CCM+T equivalent MAX14803CCM+T replacement MAX14803CCM+T cross reference MAX14803CCM+T vs MAX14803ACM+T MAX14803CCM+T 48-LQFP MAX14803CCM+T ultrasonic imaging MAX14803CCM+T price Analog Devices MAX14803CCM+T MAX14803CCM+T 16 channel switch MAX14803CCM+T footprint

Related Components & Terms

Analog Devices MAX14803CCM+T MAX14803ACM+T MAX14802CCM+T MAX14802ACM+T MAX14803A MAX14802 high-voltage analog switch analog switch IC multiplexer interface IC SPST switch HVCMOS high-voltage switching low charge injection on-resistance turn-on time turn-off time 48-LQFP LQFP package family surface mount ultrasonic imaging industrial ultrasonic inspection printer signal switching precision measurement
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details