MAX14800CCM+T - 16-Channel High-Voltage Analog Switch | Analog Devices
MPN: MAX14800CCM+T ✗ 停產MAX14800CCM+T 概覽
A high-voltage analog switch routes signals between measurement, imaging, and drive circuitry while limiting unwanted charge transfer into sensitive nodes. In the broader semiconductor hierarchy, the MAX14800CCM+T belongs to the analog switch family within interface ICs. These devices are used where a multiplexer or discrete switching network would add excessive component count, leakage paths, or inconsistent channel behavior.
The main functional characteristics are 16 independently controlled switch circuits, 1:1 signal routing, and an on-resistance of 48 ohm. Its low-charge-injection characteristic is especially valuable when switching relatively high-impedance sources, because charge injected into the input/output node can create timing errors or transient measurement offsets. The 48-LQFP package provides a compact surface-mount footprint for multi-channel imaging and printer control boards.
The MAX14800 family was developed for ultrasonic imaging and printer applications, where multiple high-voltage-capable channels are required in a single device. Integrating 16 switch circuits into one package reduces the number of discrete high-voltage switch packages, external routing connections, and associated board-level interconnect requirements. The family also includes related MAX14801, MAX14802, MAX14803, and MAX14803A variants with different protection or discharge features.
Because the MAX14800 is intended to handle high-voltage switching, the complete electrical limits must be checked in the manufacturer datasheet before applying it to a new board. In particular, verify the absolute maximum supply voltage, individual channel voltage rating, allowable input and output voltage, and derating requirements for the selected package. Do not infer those limits from the nominal operating description.
For layout, place the device close to the signals it switches, keep high-voltage and sensitive-signal paths separated, and provide a stable ground reference around the package. Check whether unused channels require defined logic states. After confirming the pin assignment, enable levels, and switching characteristics against the datasheet, the MAX14800CCM+T can support compact multichannel routing in ultrasonic, printer, and related high-voltage interface systems.
This product page combines the confirmed channel count, resistance, package, ordering information, and application context with engineering guidance for PCB implementation, protection, and alternative selection. It is intended to help designers establish whether the device architecture fits before completing detailed schematic and production-release checks.
直接替換替代品,適用於 MAX14800CCM+T — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MAX14800CCM+T (相同外形與佔位) — 差異在於 Number of Channels, Charge Injection, Package, Process Technology, Primary Application.
MAX14801CCM+T
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MAX14802CCM+T
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MAX14803CCM+T
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MAX14803ACCM+T
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
MAX14800CCM+T 最大額定值與電氣特性
| Product Type | 16-channel high-voltage analog switch IC |
| Number of Channels | 16 circuits |
| Switch Configuration | 1:1 |
| On-Resistance | 48 ohm |
| Charge Injection | Low charge injection |
| Number of Terminals | 48 terminals |
| Package Code | QFP |
| Package Type | 48-LQFP (7 x 7 mm) |
| Package Shape | Square |
| 安裝類型 | Surface mount |
| Temperature Grade | Commercial |
MAX14800CCM+T square 腳位配置指南
MAX14800CCM+T(square 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: MAX14800CCM+T.
請參閱 資料表 以查看完整腳位配置。
典型應用
MAX14800CCM+T 適用於 6 應用s: Ultrasound Imaging Channel Multiplexing, Printhead Signal Routing, High-Voltage Analog Test Routing, Multi-Channel Signal Isolation, Industrial Control Signal Multiplexing, Capacitive Node Switching.
Ultrasound Imaging Channel Multiplexing
The MAX14800CCM+T fits multichannel ultrasound imaging systems requiring 16 high-voltage-capable switching paths in one package. Its 1:1 architecture and 48 ohm on-resistance align with analog routing networks that connect transmit, receive, or test nodes through a controlled switching matrix. Low charge injection also helps limit unwanted transients on high-impedance sensing nodes. The device can simplify routing compared with 16 discrete switch packages while preserving a compact 48-LQFP 7 x 7 mm footprint. Before finalizing the receiver or transmitter interface, confirm the channel voltage rating, off leakage, switching time, control levels, and power limits against the manufacturer datasheet.
推薦
Printhead Signal Routing
The MAX14800CCM+T is suitable for printer and printhead systems where many controlled lines must be routed through a compact analog-switch network. Its 16 switch circuits reduce the component and interconnect burden associated with implementing the same channel count with discrete high-voltage switches. The 48 ohm on-resistance provides a defined nominal path for compatible signal loads, while low charge injection limits injected disturbance when the control state changes. Use the family information to establish that the device is appropriate for printer switching, then verify absolute maximum signal voltages, supply limits, and switching behavior against the actual printhead drive levels and timing requirements.
推薦
High-Voltage Analog Test Routing
The MAX14800CCM+T can form the core of a compact analog test-routing matrix when many nodes must be selected under software control. Sixteen 1:1 switch circuits allow a controller to isolate or connect instrumentation paths without requiring a separate discrete relay for every channel. Its low-charge-injection characteristic is beneficial when the destination is a high-impedance detector, while the 48 ohm on-resistance is suitable only when the resulting signal attenuation and drive current remain acceptable. Establish the maximum test voltage, leakage budget, switching duration, and power conditions before using the device outside the intended imaging and printer applications.
推薦
Multi-Channel Signal Isolation
The MAX14800CCM+T is useful when a system needs to isolate multiple analog or high-voltage-capable paths in a shared backplane. Its 16 integrated switch circuits provide a repeatable channel organization in a single 48-LQFP package, reducing board area compared with an equivalent collection of discrete switch packages. The 48 ohm nominal on-resistance must be included in the complete signal-path budget, and off leakage should be checked against the impedance of the connected source. Low charge injection reduces state-transition disturbance, but successful implementation still depends on correct control polarity, defined unused-channel states, and compliance with the complete maximum voltage ratings.
推薦
Industrial Control Signal Multiplexing
The MAX14800CCM+T can support industrial control boards that need several independently routed signal channels and a small component footprint. Its 16-channel 1:1 organization is appropriate for multiplexing control or measurement paths, while the 48-LQFP 7 x 7 mm package simplifies placement on dense equipment boards. The device is not characterized by a universal industrial voltage range, so engineers should treat the ultrasound and printer applications as its defined use cases and verify all absolute maximum ratings for other designs. Add grounding, transient protection, and thermal review as appropriate to the selected protection-family variant and the connected industrial interface.
推薦
Capacitive Node Switching
The MAX14800CCM+T can switch capacitive nodes when the design can manage stored charge through the external circuit, but the MAX14803 and MAX14803A family variants may be more appropriate when automatic terminal discharge is important. The MAX14803 versions integrate 35 kohm bleed resistors on every switch terminal to discharge capacitive loads, whereas the MAX14800 is the base configuration without that stated discharge feature. Selection should therefore begin with the required post-switch voltage, not just the nominal 48 ohm on-resistance. Confirm the resistor effect on signal impedance and the timing of the discharge network in the final application.
推薦
推薦產品摘要
工程參考資料,適用於 MAX14800CCM+T — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MAX14801CCM+T | MAX14802CCM+T | MAX14803CCM+T | MAX14803ACCM+T |
|---|---|---|---|---|---|
| Package | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Number of Channels | 16 circuits | 16 circuits | 16 circuits | 16 circuits | 16 circuits |
| Switch Configuration | 1:1 | 1:1 | 1:1 | 1:1 | 1:1 |
| Charge Injection | Low charge injection | Low charge injection | Low charge injection | Low charge injection | Low charge injection |
| Primary Applications | Ultrasound imaging and printers | Ultrasound imaging and printers | Ultrasound imaging and printers | Ultrasound imaging and printers | Ultrasound imaging and printers |
主要差異化特點
- Sixteen high-voltage switching channels in one package (對比MAX14801CCM+T)
- Distinct overshoot-protection option in the same package family (對比MAX14802CCM+T)
- Terminal-discharge option for capacitive loads (對比MAX14803CCM+T)
- Low-charge-injection multichannel switching (對比MAX14803ACCM+T)
設計說明
Do not treat the MAX14800, MAX14802, and MAX14803 family variants as automatic equivalents merely because they share 16 channels and a 48-pin package. MAX14802 adds integrated clamping diodes for positive overshoot, while MAX14803 and MAX14803A add 35 kohm bleed resistors on every switch terminal. Compare those functions with the original circuit requirements, then verify control polarity, pin names, leakage, and absolute maximum voltage limits in the manufacturer datasheet before approving a substitution.
Place the MAX14800CCM+T close to the switched nodes and maintain a low-impedance ground reference around the 48-LQFP footprint. Route analog and control traces away from adjacent high-voltage paths, keep switching-loop area small, and use a solid ground plane where the package pin arrangement permits it. Maintain short return paths for every switched channel so the 48 ohm nominal on-resistance does not combine with excessive trace resistance and introduce channel-to-channel signal imbalance.
Low charge injection does not eliminate all transient errors in a high-impedance measurement node. Minimize capacitance on sensitive terminals, provide a defined bias path, and evaluate switch off leakage against the source impedance. When capacitive loads must discharge predictably, compare the MAX14803 family option with its 35 kohm per-terminal bleed resistors; the resistor may alter signal loading and discharge timing, so verify the complete network rather than selecting it solely by switch resistance.
Confirm the supply range, quiescent current, control-logic levels, and per-channel current limits against the manufacturer datasheet before enabling the switching matrix. Sequence external protection and drive circuitry so the analog terminals cannot exceed their absolute maximum values during power transitions. For high-voltage switching applications, review the complete board insulation, creepage, clearance, and transient environment rather than relying on the package size alone.
合規資訊
Compliance attributes are not stated in the product information and must be confirmed with the manufacturer before release to a regulated market.