Analog Devices

MAX3221CUE+T - 3V RS-232 Transceiver | Analog Devices

MPN: MAX3221CUE+T ✓ সক্রিয়
3.0 V to 5.5 V Vdss Approximately 1 uA Id 16-pin TSSOP Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MAX3221CUE+T সারাংশ

Analog Devices MAX3221CUE+T is a one-driver, one-receiver RS-232 transceiver designed for operation from a 3.0 V to 5.5 V single supply. The device combines a dual charge-pump supply, automatic shutdown, and a low-dropout line driver in a 16-pin TSSOP package. Its RS-232 line-driver output and receiver input are intended for serial-port connections, while the integrated charge pumps generate the bipolar voltage required to transmit RS-232 signals from a low-voltage supply.

An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts incoming RS-232 signals into logic-level inputs. In the product hierarchy, the MAX3221 belongs to the RS-232 transceiver class, interface IC category, and broader semiconductor family. It is appropriate where a modern controller operates from 3.0 V or 5.0 V but the attached equipment still uses the voltage range and signaling conventions of the RS-232 standard.

The MAX3221 uses AutoShutdown to reduce supply consumption when no valid receiver signal is detected. According to the manufacturer, this feature can reduce onboard supply and driver current to approximately 1 µA when the receiver inputs are inactive. The MAX3221CUE+T ordering code identifies the temperature-range and package configuration, while the +T suffix denotes the tape-and-reel shipping format shown for this part.

Internally, the proprietary dual charge-pump circuit produces the elevated voltage used by the driver from one 3.0 V to 5.5 V supply. This architecture avoids a separate negative power rail in equipment using a single positive supply. The receiver converts the RS-232 input into CMOS-compatible logic, and the driver presents the required RS-232 output levels to the connector-side interface.

Typical uses include industrial control panels, point-of-sale terminals, serial adapters, embedded instrumentation, and service equipment that must connect a low-voltage processor to an RS-232 port. The 16-pin TSSOP package also suits compact boards where connector spacing and component height are important. The AutoShutdown behavior is particularly useful in battery-powered or intermittently connected portable systems.

Layout should place charge-pump capacitors and interface-path components close to the device, keep the RS-232 traces away from sensitive analog and high-speed digital nets, and provide a low-impedance ground return. The external interface must also satisfy the applicable RS-232 voltage, grounding, and ESD requirements. Because this integrated circuit generates only a small number of RS-232 channels, a multiport design may require multiple transceivers or a higher-channel-count device.

This product page combines the manufacturer specifications, package information, RS-232 application context, practical layout guidance, and a pin-compatible comparison focused on helping engineers determine whether the MAX3221CUE+T can be used without redesigning an existing 16-pin TSSOP circuit.

এর জন্য ড্রপ-ইন বিকল্প MAX3221CUE+T — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible MAX3221CUE+T (একই form factor এবং footprint) — পার্থক্য রয়েছে ESD Protection, Product Type, Supply Voltage Range, Maximum Data Rate, Package.

Texas Instruments
ESD Protection: ±15 kV pin-to-pin
Product Type: Single-channel RS-232 line driver/receiver
Supply Voltage Range: 3 V to 5.5 V
এর সাথে তুলনা করুন MAX3221CUE+T →
Texas Instruments
ESD Protection: plus or minus 15 kV
Product Type: RS-232 line driver and receiver transceiver
Supply Voltage Range: 3 V to 5.5 V
এর সাথে তুলনা করুন MAX3221CUE+T →

MAX3221CPW

✅ ড্রপ-ইন
Texas Instruments
📦 16-TSSOP
Single-channel RS-232 line driver/receiver · 3 V to 5.5 V · 250 kbit/s · ±15 kV pin-to-pin · 1 · 1 · Dedicated enable pin · Dual charge-pump circuit

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MAX3221ECPWR

✅ ড্রপ-ইন
Texas Instruments
📦 16-TSSOP
RS-232 line driver and receiver transceiver · 3 V to 5.5 V · 250 kbps · 1 · 1 · plus or minus 15 kV · TIA/EIA-232-F · Dual charge-pump circuit

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

TRSF3221EIPWR

✅ ড্রপ-ইন
📦 16-TSSOP
Cross-brand 1/1 RS-232 transceiver in the same 16-TSSOP footprint; 0 channel-count difference, with enable and shutdown behavior requiring verification.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ICL3221EIAZ-T

✅ ড্রপ-ইন
📦 16-TSSOP
Cross-brand 1/1 RS-232 interface in the same 16-TSSOP footprint; 0 channel-count difference, while electrical and timing details must be compared.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

SN75C3221PWG4

✅ ড্রপ-ইন
📦 16-TSSOP
Cross-brand 1/1 RS-232 transceiver in the same 16-TSSOP footprint; 0 channel-count difference, with supply, logic, and shutdown conditions requiring confirmation.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MAX3221CUE+T বিশেষণ

Product Type RS-232 transceiver
Driver / Receiver Count 1 driver / 1 receiver
Supply Voltage Range 3.0 V to 5.5 V
AutoShutdown Supply Current Approximately 1 uA
Interface Protocol RS-232
ESD Protection +/-15 kV pin-to-pin on RS-232 connection pins
Power-Supply Architecture 1 dual charge-pump circuit
Line-Driver Architecture 1 low-dropout RS-232 transmitter
Receiver Output 1 logic-level receiver output
Package Type 16-pin TSSOP
Package Width 4.40 mm
মাউন্টিং টাইপ Surface mount
Shipping Format Tape and reel

MAX3221CUE+T 4.40 mm পিন কনফিগারেশন গাইড

MAX3221CUE+T (4.40 mm প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

MAX3221CUE+T-এর জন্য 4.40 mm প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MAX3221CUE+T.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

MAX3221CUE+T এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Serial Control Panel, Point-of-Sale Terminal Interface, Embedded Serial Adapter, Battery-Powered Service Instrument, RS-232 Test and Measurement Adapter, Portable Connectivity Module.

🏭

Industrial Serial Control Panel

The MAX3221CUE+T fits an industrial control panel that must connect a 3.3 V or 5 V controller to an RS-232 service port. Its single driver and single receiver provide the required point-to-point signal path, while the integrated dual charge-pump circuit produces RS-232 levels without a negative supply rail. According to the Analog Devices MAX3221-MAX3243 datasheet, the device operates from 3.0 V to 5.5 V and can reduce supply current to approximately 1 uA when AutoShutdown detects no valid receiver signal.

🖥️

Point-of-Sale Terminal Interface

A point-of-sale terminal can use the MAX3221CUE+T to bridge a low-voltage application processor and an RS-232 peripheral such as a scanner, printer, or customer-display controller. The 3.0 V to 5.5 V operating range allows the interface to share either 3.3 V or 5 V system power. The 16-pin TSSOP package helps conserve board area, and AutoShutdown is useful when the peripheral cable is disconnected because the onboard supply and driver can shut down when no valid signal is detected.

🔧

Embedded Serial Adapter

The MAX3221CUE+T is suitable for a compact embedded serial adapter that converts a host UART into an RS-232 connection. Its one-driver, one-receiver arrangement matches the usual transmit and receive signals required by a single serial channel. The integrated charge-pump and low-dropout transmitter allow operation from a 3.0 V to 5.5 V host rail, while the 16-pin TSSOP package supports compact product construction. The design should follow the manufacturer application circuit for capacitor selection and charge-pump layout.

🔋

Battery-Powered Service Instrument

A battery-powered service instrument can benefit from the MAX3221CUE+T because its AutoShutdown behavior reduces onboard supply and driver current to approximately 1 uA when the receiver detects no valid signal level. This makes the interface suitable for equipment that spends substantial time connected to, but idle on, an RS-232 port. The device also protects RS-232 connection pins with +/-15 kV pin-to-pin ESD protection. Power-system sizing should include the normal operating current and wake-up behavior required by the attached equipment.

📡

RS-232 Test and Measurement Adapter

The MAX3221CUE+T can provide the RS-232 side of a test adapter connected to a low-voltage embedded controller. One receiver channel accepts the external serial signal, and one driver channel transmits the controller response. Since the transceiver works from 3.0 V to 5.5 V, the adapter can avoid a separate negative supply while retaining standard RS-232 signaling. Place the external protection and connector circuitry so that electrostatic discharge current follows the intended path through the protected interface pins.

📱

Portable Connectivity Module

A portable connectivity module can use the MAX3221CUE+T for a legacy RS-232 service connector while the rest of the module operates from a modern low-voltage rail. The 16-pin TSSOP package limits board footprint, and the single RS-232 channel keeps the interface economical. AutoShutdown helps reduce consumption during idle periods, whereas the specified 3.0 V to 5.5 V range permits direct use with common embedded supply levels. Connector shielding, cable routing, and grounding remain important because the transceiver IC cannot replace the complete external ESD and surge-protection network.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

MAX3221CUE+ Analog Devices ব্যবহৃত হয়: Industrial Serial Control Panel, Point-of-Sale Terminal Interface, Embedded Serial Adapter, RS-232 Test and Measurement Adapter MAX3221CUE-T Same MAX3221CUE electrical configuration ব্যবহৃত হয়: Industrial Serial Control Panel, Embedded Serial Adapter MAX3223 Higher-channel RS-232 family member ব্যবহৃত হয়: Point-of-Sale Terminal Interface MAX3221CPW Texas Instruments ব্যবহৃত হয়: Battery-Powered Service Instrument, Portable Connectivity Module MAX3221ECPWR Texas Instruments ব্যবহৃত হয়: Battery-Powered Service Instrument MAX3243 Multi-channel RS-232 family alternative ব্যবহৃত হয়: RS-232 Test and Measurement Adapter TRSF3221EIPWR Single-channel TSSOP RS-232 candidate ব্যবহৃত হয়: Portable Connectivity Module
What is the MAX3221CUE+T?
The MAX3221CUE+T is a one-driver, one-receiver RS-232 transceiver operating from a 3.0 V to 5.5 V supply in a 16-pin TSSOP package. It uses an integrated dual charge-pump circuit and a low-dropout transmitter, eliminating the need for a separate negative supply. According to the Analog Devices MAX3221-MAX3243 datasheet, the device is designed for single-supply RS-232 connections between modern logic systems and legacy serial equipment.
What is the operating voltage of MAX3221CUE+T?
The MAX3221CUE+T operates from 3.0 V to 5.5 V. This range supports both common 3.3 V and 5 V system rails without requiring a negative supply. According to the Analog Devices MAX3221-MAX3243 datasheet, the integrated charge-pump circuit and low-dropout transmitter generate the required RS-232 signal levels from the single positive supply, simplifying power architecture in embedded and industrial equipment.
Where can I download the MAX3221CUE+T datasheet PDF?
The MAX3221CUE+T datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/MAX3221-MAX3243.pdf. The manufacturer document covers the MAX3221, MAX3223, and MAX3243 RS-232 transceiver family, including the supply circuit, AutoShutdown behavior, electrical characteristics, and package information. Use the ordering-information and pin-description sections to confirm the exact CUE and +T configuration.
Where can I find the MAX3221CUE+T pinout?
The MAX3221CUE+T pin assignment is shown in the pin-description and package-diagram sections of the Analog Devices MAX3221-MAX3243 datasheet. The device uses a 16-pin TSSOP footprint, but individual pin numbers and signal names are not reproduced on this page to avoid transcription errors. Before assigning PCB tracks, cross-check every net against the manufacturer drawing and confirm whether unused pins require specific connection states.
How does AutoShutdown work in the MAX3221CUE+T?
AutoShutdown reduces the MAX3221CUE+T supply current to approximately 1 uA when the receiver inputs do not detect a valid signal level. According to the Analog Devices MAX3221-MAX3243 datasheet, the onboard power supply and driver shut down under that condition. This behavior is useful in portable or battery-operated equipment that should not continue charging the interface circuitry while the RS-232 connection is idle.
Is MAX3221CUE+T suitable for a 3.3 V microcontroller?
The MAX3221CUE+T is suitable for a 3.3 V microcontroller because its supply range is 3.0 V to 5.5 V. The receiver provides one logic-level output for the host controller, while the transmitter provides one RS-232 output. According to the manufacturer datasheet, the charge-pump and low-dropout transmitter architecture provides RS-232 operation from the same low-voltage rail, although logic levels and timing still require board-level verification.
What is the difference between MAX3221CUE+T and MAX3221CUE+?
MAX3221CUE+T and MAX3221CUE+ identify the same MAX3221CUE device configuration, while the +T suffix specifies the tape-and-reel shipping format. Both are listed as one-driver, one-receiver RS-232 transceivers in 16-pin TSSOP packages with a 3.0 V to 5.5 V supply. For a new reel-fed assembly, MAX3221CUE+T is the ordering choice associated with the +T packaging designation.
What is the best drop-in replacement for MAX3221CUE+T?
The MAX3221CUE+T can be replaced by a pin-compatible 1/1-channel RS-232 transceiver in the same 16-pin TSSOP footprint, provided its voltage, shutdown, and logic-level characteristics satisfy the original circuit. MAX3221CPW and MAX3221ECPWR are same-family choices, while TRSF3221EIPWR, ICL3221EIAZ-T, and SN75C3221PWG4 are cross-brand candidates. The manufacturer datasheet and the original PCB pin description should be checked before production substitution.
Can TRSF3221EIPWR replace MAX3221CUE+T?
TRSF3221EIPWR is a potential 16-pin TSSOP replacement candidate for MAX3221CUE+T because both are listed as single-driver, single-receiver RS-232 interface devices operating in the 3.0 V to 5.5 V class. Confirm pin-by-pin signal compatibility, receiver enable behavior, AutoShutdown timing, charge-pump capacitor values, and ESD ratings in each manufacturer datasheet. A shared package alone does not establish that every timing and shutdown condition is identical.
When should I choose MAX3221CUE+T over MAX3221CPW?
Choose MAX3221CUE+T when the assembly process requires the +T tape-and-reel configuration, while choosing MAX3221CPW when that ordering configuration better matches the production plan. The MAX3221CUE+T is identified as a 1/1 RS-232 transceiver in a 16-pin TSSOP package and operates from 3.0 V to 5.5 V. Verify the exact suffix, temperature grade, and pin configuration in the ordering table for either device before releasing a build.
Is MAX3221CUE+T the same as MAX3232CDBG4?
The MAX3221CUE+T is not an automatic substitute for the MAX3232CDBG4 because the latter is presented in the comparison results as a different 16-pin package option and the MAX3221 has 1 driver with 1 receiver. The MAX3232 family provides 2 drivers and 2 receivers, so it changes the channel count. The MAX3221CUE+T is the better choice when the existing circuit requires exactly one driver and one receiver in a 16-pin TSSOP footprint.
Where can I buy MAX3221CUE+T and check its lead time?
Use the Request a Quote form on this page to request MAX3221CUE+T availability, current lead time, minimum order quantity, and shipment options. The +T part is associated with a tape-and-reel shipping format. Current commercial terms can change by quantity and market conditions, so request a quotation for the production quantity rather than relying on a historical or generic listing price.
What is the price of MAX3221CUE+T?
Submit the MAX3221CUE+T Request a Quote form on this page for the current unit price at your required quantity. Pricing can vary with order quantity, reel format, delivery location, and current supplier conditions. The structured pricing area on this page is intended to display current commercial terms, while the quote form provides a direct way to request the exact configuration and quantity needed for procurement.
Is MAX3221CUE+T in stock?
Current MAX3221CUE+T stock should be confirmed through the Request a Quote form on this page. The manufacturer and distributor listings identify the part as a 1/1 RS-232 transceiver in a 16-pin TSSOP tape-and-reel format, but listing presence does not guarantee a particular quantity is immediately available. Include your required order quantity, date code needs, and shipment destination in the request.
What are the key specifications of MAX3221CUE+T that engineers should know?
The key engineering specifications are a 3.0 V to 5.5 V supply, one RS-232 driver, one receiver, approximately 1 uA AutoShutdown current, and a 16-pin TSSOP package. The device also includes a dual charge-pump circuit, a low-dropout transmitter, and pin-to-pin ESD protection rated at +/-15 kV on RS-232 connection pins. According to the Analog Devices MAX3221-MAX3243 datasheet, these features support low-voltage host systems with legacy RS-232 equipment.
What layout practices are important for MAX3221CUE+T?
Place the charge-pump capacitors and required bypass capacitors close to their specified pins, provide a short ground return, and keep RS-232 traces away from sensitive analog or high-speed digital nets. The Analog Devices MAX3221-MAX3243 datasheet provides the recommended capacitor values and application circuit. Maintain adequate spacing from external cables and connectors because electrostatic discharge energy must be directed through the intended protection and ground paths rather than board traces.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MAX3221CUE+T — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the MAX3221CUE+T when a compact 16-pin TSSOP RS-232 interface is required for a 3.3 V or 5 V system, particularly when low idle current and tape-and-reel assembly are priorities. Its approximately 1 uA AutoShutdown current and integrated dual charge pump simplify single-supply designs, while the one-driver, one-receiver configuration matches a single UART link. MAX3221CPW and MAX3221ECPWR are same-family choices when their ordering and temperature configurations better fit production. Consider TRSF3221EIPWR, ICL3221EIAZ-T, or SN75C3221PWG4 only after checking enable polarity, shutdown timing, capacitor requirements, logic levels, and temperature limits against the original circuit. The MAX3232 family is not a direct substitute when the board requires exactly one channel or the 16-pin TSSOP footprint.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য MAX3221CPW MAX3221ECPWR TRSF3221EIPWR ICL3221EIAZ-T SN75C3221PWG4
Package 16-TSSOP 16-TSSOP 16-TSSOP 16-TSSOP 16-TSSOP 16-TSSOP
Brand Analog Devices Analog Devices Analog Devices Texas Instruments Renesas Electronics Texas Instruments
Driver / Receiver Count 1 / 1 1 / 1 1 / 1 1 / 1 1 / 1 1 / 1

মূল পার্থক্যসমূহ

  • Low-power automatic shutdown (বনামTRSF3221EIPWR)
  • Explicit pin-to-pin ESD protection rating (বনামICL3221EIAZ-T)
  • Single-supply charge-pump integration (বনামSN75C3221PWG4)
  • Exact channel-count fit (বনামMAX3232CDBG4)

ডিজাইন নোট

Follow the Analog Devices MAX3221-MAX3243 datasheet application circuit for charge-pump capacitor values and placement. Keep the charge-pump network and device ground connection compact because long return paths can increase radiated noise and reduce effective charge-pump performance. Provide the specified local bypass capacitor at the supply pins and use a low-impedance ground plane connection close to the IC.

Route the RS-232 driver and receiver nets directly toward the connector or protection circuit while keeping them away from clocks, sensor inputs, ADC signals, and other sensitive nets. Avoid sharing narrow ground-current paths between the transceiver and noisy digital circuitry. Maintain the connector and cable-return path according to the mechanical and grounding requirements of the attached RS-232 equipment.

Do not treat a shared TSSOP-16 footprint as proof of automatic interchangeability. Confirm driver and receiver logic levels, receiver-enable behavior, shutdown timing, charge-pump capacitor values, and operating-temperature grade in each device datasheet. The MAX3221CUE+T has one driver and one receiver, so it cannot directly replace a two-channel interface without additional circuitry.

AutoShutdown can reduce current consumption when no valid receiver signal is detected, but it can also introduce startup and re-enable timing that must be coordinated with the host UART. Test repeated connection and disconnection, cold-start behavior, and cable transitions. Maintain the signal-ground reference required by the connected equipment and avoid allowing unused connector pins to float near active RS-232 lines.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The identified manufacturer product family is the MAX3221/MAX3223/MAX3243 RS-232 transceiver series. Compliance status and automotive qualification require confirmation from the specific ordering code and current manufacturer documentation.

ডেটা যাচাই করা হয়েছে: 2026-11-09 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

MAX3221CUE+T datasheet MAX3221CUE+T datasheet pdf MAX3221CUE+T pinout MAX3221CUE+T specifications MAX3221CUE+T equivalent MAX3221CUE+T replacement MAX3221CUE+T cross reference MAX3221CUE+T vs MAX3221CPW MAX3221CUE+T TSSOP-16 MAX3221CUE+T price MAX3221CUE+T stock Analog Devices MAX3221CUE+T MAX3221CUE+T application circuit MAX3221CUE+T AutoShutdown current

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Analog Devices MAX3221CUE+T MAX3221 MAX3221CPW MAX3221ECPWR TRSF3221EIPWR ICL3221EIAZ-T SN75C3221PWG4 RS-232 transceiver interface IC semiconductor AutoShutdown dual charge-pump circuit low-dropout transmitter RS-232 CMOS logic TSSOP-16 TSSOP family surface-mount package ESD protection industrial control point-of-sale terminal embedded serial adapter test and measurement battery-powered equipment
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন