MAX3221CUE+T - 3V RS-232 Transceiver | Analog Devices
MPN: MAX3221CUE+T ✓ Hoạt độngMAX3221CUE+T Tóm tắt
An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts incoming RS-232 signals into logic-level inputs. In the product hierarchy, the MAX3221 belongs to the RS-232 transceiver class, interface IC category, and broader semiconductor family. It is appropriate where a modern controller operates from 3.0 V or 5.0 V but the attached equipment still uses the voltage range and signaling conventions of the RS-232 standard.
The MAX3221 uses AutoShutdown to reduce supply consumption when no valid receiver signal is detected. According to the manufacturer, this feature can reduce onboard supply and driver current to approximately 1 µA when the receiver inputs are inactive. The MAX3221CUE+T ordering code identifies the temperature-range and package configuration, while the +T suffix denotes the tape-and-reel shipping format shown for this part.
Internally, the proprietary dual charge-pump circuit produces the elevated voltage used by the driver from one 3.0 V to 5.5 V supply. This architecture avoids a separate negative power rail in equipment using a single positive supply. The receiver converts the RS-232 input into CMOS-compatible logic, and the driver presents the required RS-232 output levels to the connector-side interface.
Typical uses include industrial control panels, point-of-sale terminals, serial adapters, embedded instrumentation, and service equipment that must connect a low-voltage processor to an RS-232 port. The 16-pin TSSOP package also suits compact boards where connector spacing and component height are important. The AutoShutdown behavior is particularly useful in battery-powered or intermittently connected portable systems.
Layout should place charge-pump capacitors and interface-path components close to the device, keep the RS-232 traces away from sensitive analog and high-speed digital nets, and provide a low-impedance ground return. The external interface must also satisfy the applicable RS-232 voltage, grounding, and ESD requirements. Because this integrated circuit generates only a small number of RS-232 channels, a multiport design may require multiple transceivers or a higher-channel-count device.
This product page combines the manufacturer specifications, package information, RS-232 application context, practical layout guidance, and a pin-compatible comparison focused on helping engineers determine whether the MAX3221CUE+T can be used without redesigning an existing 16-pin TSSOP circuit.
Bộ thay thế dễ dàng lắp đặt cho MAX3221CUE+T — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MAX3221CUE+T (cùng hình factor và footprint) — khác nhau ở ESD Protection, Product Type, Supply Voltage Range, Maximum Data Rate, Package.
MAX3221CPW
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3221ECPWR
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →TRSF3221EIPWR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ICL3221EIAZ-T
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
SN75C3221PWG4
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MAX3221CUE+T Thông số kỹ thuật
| Product Type | RS-232 transceiver |
| Driver / Receiver Count | 1 driver / 1 receiver |
| Supply Voltage Range | 3.0 V to 5.5 V |
| AutoShutdown Supply Current | Approximately 1 uA |
| Interface Protocol | RS-232 |
| ESD Protection | +/-15 kV pin-to-pin on RS-232 connection pins |
| Power-Supply Architecture | 1 dual charge-pump circuit |
| Line-Driver Architecture | 1 low-dropout RS-232 transmitter |
| Receiver Output | 1 logic-level receiver output |
| Package Type | 16-pin TSSOP |
| Package Width | 4.40 mm |
| Kiểu lắp đặt | Surface mount |
| Shipping Format | Tape and reel |
Hướng dẫn cấu hình chân MAX3221CUE+T 4.40 mm
Cấu hình chân cho MAX3221CUE+T (4.40 mm gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho MAX3221CUE+T.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MAX3221CUE+T phù hợp cho 6 Áp dụngs: Industrial Serial Control Panel, Point-of-Sale Terminal Interface, Embedded Serial Adapter, Battery-Powered Service Instrument, RS-232 Test and Measurement Adapter, Portable Connectivity Module.
Industrial Serial Control Panel
The MAX3221CUE+T fits an industrial control panel that must connect a 3.3 V or 5 V controller to an RS-232 service port. Its single driver and single receiver provide the required point-to-point signal path, while the integrated dual charge-pump circuit produces RS-232 levels without a negative supply rail. According to the Analog Devices MAX3221-MAX3243 datasheet, the device operates from 3.0 V to 5.5 V and can reduce supply current to approximately 1 uA when AutoShutdown detects no valid receiver signal.
Được đề xuất
Point-of-Sale Terminal Interface
A point-of-sale terminal can use the MAX3221CUE+T to bridge a low-voltage application processor and an RS-232 peripheral such as a scanner, printer, or customer-display controller. The 3.0 V to 5.5 V operating range allows the interface to share either 3.3 V or 5 V system power. The 16-pin TSSOP package helps conserve board area, and AutoShutdown is useful when the peripheral cable is disconnected because the onboard supply and driver can shut down when no valid signal is detected.
Được đề xuất
Embedded Serial Adapter
The MAX3221CUE+T is suitable for a compact embedded serial adapter that converts a host UART into an RS-232 connection. Its one-driver, one-receiver arrangement matches the usual transmit and receive signals required by a single serial channel. The integrated charge-pump and low-dropout transmitter allow operation from a 3.0 V to 5.5 V host rail, while the 16-pin TSSOP package supports compact product construction. The design should follow the manufacturer application circuit for capacitor selection and charge-pump layout.
Được đề xuất
Battery-Powered Service Instrument
A battery-powered service instrument can benefit from the MAX3221CUE+T because its AutoShutdown behavior reduces onboard supply and driver current to approximately 1 uA when the receiver detects no valid signal level. This makes the interface suitable for equipment that spends substantial time connected to, but idle on, an RS-232 port. The device also protects RS-232 connection pins with +/-15 kV pin-to-pin ESD protection. Power-system sizing should include the normal operating current and wake-up behavior required by the attached equipment.
Được đề xuất
RS-232 Test and Measurement Adapter
The MAX3221CUE+T can provide the RS-232 side of a test adapter connected to a low-voltage embedded controller. One receiver channel accepts the external serial signal, and one driver channel transmits the controller response. Since the transceiver works from 3.0 V to 5.5 V, the adapter can avoid a separate negative supply while retaining standard RS-232 signaling. Place the external protection and connector circuitry so that electrostatic discharge current follows the intended path through the protected interface pins.
Được đề xuất
Portable Connectivity Module
A portable connectivity module can use the MAX3221CUE+T for a legacy RS-232 service connector while the rest of the module operates from a modern low-voltage rail. The 16-pin TSSOP package limits board footprint, and the single RS-232 channel keeps the interface economical. AutoShutdown helps reduce consumption during idle periods, whereas the specified 3.0 V to 5.5 V range permits direct use with common embedded supply levels. Connector shielding, cable routing, and grounding remain important because the transceiver IC cannot replace the complete external ESD and surge-protection network.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MAX3221CUE+T — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MAX3221CPW | MAX3221ECPWR | TRSF3221EIPWR | ICL3221EIAZ-T | SN75C3221PWG4 |
|---|---|---|---|---|---|---|
| Package | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Texas Instruments | Renesas Electronics | Texas Instruments |
| Driver / Receiver Count | 1 / 1 | 1 / 1 | 1 / 1 | 1 / 1 | 1 / 1 | 1 / 1 |
Bảo phân biệt quan trọng
- Low-power automatic shutdown (vsTRSF3221EIPWR)
- Explicit pin-to-pin ESD protection rating (vsICL3221EIAZ-T)
- Single-supply charge-pump integration (vsSN75C3221PWG4)
- Exact channel-count fit (vsMAX3232CDBG4)
Ghi chú thiết kế
Follow the Analog Devices MAX3221-MAX3243 datasheet application circuit for charge-pump capacitor values and placement. Keep the charge-pump network and device ground connection compact because long return paths can increase radiated noise and reduce effective charge-pump performance. Provide the specified local bypass capacitor at the supply pins and use a low-impedance ground plane connection close to the IC.
Route the RS-232 driver and receiver nets directly toward the connector or protection circuit while keeping them away from clocks, sensor inputs, ADC signals, and other sensitive nets. Avoid sharing narrow ground-current paths between the transceiver and noisy digital circuitry. Maintain the connector and cable-return path according to the mechanical and grounding requirements of the attached RS-232 equipment.
Do not treat a shared TSSOP-16 footprint as proof of automatic interchangeability. Confirm driver and receiver logic levels, receiver-enable behavior, shutdown timing, charge-pump capacitor values, and operating-temperature grade in each device datasheet. The MAX3221CUE+T has one driver and one receiver, so it cannot directly replace a two-channel interface without additional circuitry.
AutoShutdown can reduce current consumption when no valid receiver signal is detected, but it can also introduce startup and re-enable timing that must be coordinated with the host UART. Test repeated connection and disconnection, cold-start behavior, and cable transitions. Maintain the signal-ground reference required by the connected equipment and avoid allowing unused connector pins to float near active RS-232 lines.
Thông tin tuân thủ
The identified manufacturer product family is the MAX3221/MAX3223/MAX3243 RS-232 transceiver series. Compliance status and automotive qualification require confirmation from the specific ordering code and current manufacturer documentation.