MAX3221CUE+T - 3V RS-232 Transceiver | Analog Devices
N.º da peça: MAX3221CUE+T ✓ AtivoMAX3221CUE+T Visão geral
An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts incoming RS-232 signals into logic-level inputs. In the product hierarchy, the MAX3221 belongs to the RS-232 transceiver class, interface IC category, and broader semiconductor family. It is appropriate where a modern controller operates from 3.0 V or 5.0 V but the attached equipment still uses the voltage range and signaling conventions of the RS-232 standard.
The MAX3221 uses AutoShutdown to reduce supply consumption when no valid receiver signal is detected. According to the manufacturer, this feature can reduce onboard supply and driver current to approximately 1 µA when the receiver inputs are inactive. The MAX3221CUE+T ordering code identifies the temperature-range and package configuration, while the +T suffix denotes the tape-and-reel shipping format shown for this part.
Internally, the proprietary dual charge-pump circuit produces the elevated voltage used by the driver from one 3.0 V to 5.5 V supply. This architecture avoids a separate negative power rail in equipment using a single positive supply. The receiver converts the RS-232 input into CMOS-compatible logic, and the driver presents the required RS-232 output levels to the connector-side interface.
Typical uses include industrial control panels, point-of-sale terminals, serial adapters, embedded instrumentation, and service equipment that must connect a low-voltage processor to an RS-232 port. The 16-pin TSSOP package also suits compact boards where connector spacing and component height are important. The AutoShutdown behavior is particularly useful in battery-powered or intermittently connected portable systems.
Layout should place charge-pump capacitors and interface-path components close to the device, keep the RS-232 traces away from sensitive analog and high-speed digital nets, and provide a low-impedance ground return. The external interface must also satisfy the applicable RS-232 voltage, grounding, and ESD requirements. Because this integrated circuit generates only a small number of RS-232 channels, a multiport design may require multiple transceivers or a higher-channel-count device.
This product page combines the manufacturer specifications, package information, RS-232 application context, practical layout guidance, and a pin-compatible comparison focused on helping engineers determine whether the MAX3221CUE+T can be used without redesigning an existing 16-pin TSSOP circuit.
Alternativas drop-in para MAX3221CUE+T — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MAX3221CUE+T (mesmo formato e footprint) — diferindo em ESD Protection, Product Type, Supply Voltage Range, Maximum Data Rate, Package.
MAX3221CPW
✅ Drop-InConsulte o preço
Ver ficha técnica →MAX3221ECPWR
✅ Drop-InConsulte o preço
Ver ficha técnica →TRSF3221EIPWR
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ICL3221EIAZ-T
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
SN75C3221PWG4
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MAX3221CUE+T Especificações
| Product Type | RS-232 transceiver |
| Driver / Receiver Count | 1 driver / 1 receiver |
| Supply Voltage Range | 3.0 V to 5.5 V |
| AutoShutdown Supply Current | Approximately 1 uA |
| Interface Protocol | RS-232 |
| ESD Protection | +/-15 kV pin-to-pin on RS-232 connection pins |
| Power-Supply Architecture | 1 dual charge-pump circuit |
| Line-Driver Architecture | 1 low-dropout RS-232 transmitter |
| Receiver Output | 1 logic-level receiver output |
| Package Type | 16-pin TSSOP |
| Package Width | 4.40 mm |
| Tipo de montagem | Surface mount |
| Shipping Format | Tape and reel |
Guia de Configuração de Pinos do MAX3221CUE+T 4.40 mm
Configuração de pinos para MAX3221CUE+T (pacote 4.40 mm). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para MAX3221CUE+T.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MAX3221CUE+T é adequado para 6 aplicaçãos: Industrial Serial Control Panel, Point-of-Sale Terminal Interface, Embedded Serial Adapter, Battery-Powered Service Instrument, RS-232 Test and Measurement Adapter, Portable Connectivity Module.
Industrial Serial Control Panel
The MAX3221CUE+T fits an industrial control panel that must connect a 3.3 V or 5 V controller to an RS-232 service port. Its single driver and single receiver provide the required point-to-point signal path, while the integrated dual charge-pump circuit produces RS-232 levels without a negative supply rail. According to the Analog Devices MAX3221-MAX3243 datasheet, the device operates from 3.0 V to 5.5 V and can reduce supply current to approximately 1 uA when AutoShutdown detects no valid receiver signal.
Recomendado
Point-of-Sale Terminal Interface
A point-of-sale terminal can use the MAX3221CUE+T to bridge a low-voltage application processor and an RS-232 peripheral such as a scanner, printer, or customer-display controller. The 3.0 V to 5.5 V operating range allows the interface to share either 3.3 V or 5 V system power. The 16-pin TSSOP package helps conserve board area, and AutoShutdown is useful when the peripheral cable is disconnected because the onboard supply and driver can shut down when no valid signal is detected.
Recomendado
Embedded Serial Adapter
The MAX3221CUE+T is suitable for a compact embedded serial adapter that converts a host UART into an RS-232 connection. Its one-driver, one-receiver arrangement matches the usual transmit and receive signals required by a single serial channel. The integrated charge-pump and low-dropout transmitter allow operation from a 3.0 V to 5.5 V host rail, while the 16-pin TSSOP package supports compact product construction. The design should follow the manufacturer application circuit for capacitor selection and charge-pump layout.
Recomendado
Battery-Powered Service Instrument
A battery-powered service instrument can benefit from the MAX3221CUE+T because its AutoShutdown behavior reduces onboard supply and driver current to approximately 1 uA when the receiver detects no valid signal level. This makes the interface suitable for equipment that spends substantial time connected to, but idle on, an RS-232 port. The device also protects RS-232 connection pins with +/-15 kV pin-to-pin ESD protection. Power-system sizing should include the normal operating current and wake-up behavior required by the attached equipment.
Recomendado
RS-232 Test and Measurement Adapter
The MAX3221CUE+T can provide the RS-232 side of a test adapter connected to a low-voltage embedded controller. One receiver channel accepts the external serial signal, and one driver channel transmits the controller response. Since the transceiver works from 3.0 V to 5.5 V, the adapter can avoid a separate negative supply while retaining standard RS-232 signaling. Place the external protection and connector circuitry so that electrostatic discharge current follows the intended path through the protected interface pins.
Recomendado
Portable Connectivity Module
A portable connectivity module can use the MAX3221CUE+T for a legacy RS-232 service connector while the rest of the module operates from a modern low-voltage rail. The 16-pin TSSOP package limits board footprint, and the single RS-232 channel keeps the interface economical. AutoShutdown helps reduce consumption during idle periods, whereas the specified 3.0 V to 5.5 V range permits direct use with common embedded supply levels. Connector shielding, cable routing, and grounding remain important because the transceiver IC cannot replace the complete external ESD and surge-protection network.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MAX3221CUE+T — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MAX3221CPW | MAX3221ECPWR | TRSF3221EIPWR | ICL3221EIAZ-T | SN75C3221PWG4 |
|---|---|---|---|---|---|---|
| Package | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Texas Instruments | Renesas Electronics | Texas Instruments |
| Driver / Receiver Count | 1 / 1 | 1 / 1 | 1 / 1 | 1 / 1 | 1 / 1 | 1 / 1 |
Principais diferenciais
- Low-power automatic shutdown (vs TRSF3221EIPWR)
- Explicit pin-to-pin ESD protection rating (vs ICL3221EIAZ-T)
- Single-supply charge-pump integration (vs SN75C3221PWG4)
- Exact channel-count fit (vs MAX3232CDBG4)
Notas de projeto
Follow the Analog Devices MAX3221-MAX3243 datasheet application circuit for charge-pump capacitor values and placement. Keep the charge-pump network and device ground connection compact because long return paths can increase radiated noise and reduce effective charge-pump performance. Provide the specified local bypass capacitor at the supply pins and use a low-impedance ground plane connection close to the IC.
Route the RS-232 driver and receiver nets directly toward the connector or protection circuit while keeping them away from clocks, sensor inputs, ADC signals, and other sensitive nets. Avoid sharing narrow ground-current paths between the transceiver and noisy digital circuitry. Maintain the connector and cable-return path according to the mechanical and grounding requirements of the attached RS-232 equipment.
Do not treat a shared TSSOP-16 footprint as proof of automatic interchangeability. Confirm driver and receiver logic levels, receiver-enable behavior, shutdown timing, charge-pump capacitor values, and operating-temperature grade in each device datasheet. The MAX3221CUE+T has one driver and one receiver, so it cannot directly replace a two-channel interface without additional circuitry.
AutoShutdown can reduce current consumption when no valid receiver signal is detected, but it can also introduce startup and re-enable timing that must be coordinated with the host UART. Test repeated connection and disconnection, cold-start behavior, and cable transitions. Maintain the signal-ground reference required by the connected equipment and avoid allowing unused connector pins to float near active RS-232 lines.
Informações de conformidade
The identified manufacturer product family is the MAX3221/MAX3223/MAX3243 RS-232 transceiver series. Compliance status and automotive qualification require confirmation from the specific ordering code and current manufacturer documentation.