শেষবার কেনার নোটিশ: MAX3243ECPW এন্ড-অফ-লাইফের কাছাকাছি। শেষ অর্ডারের তারিখ: আমাদের সাথে যোগাযোগ করুন. উপলব্ধ বিকল্প পার্ট দেখুন →
Texas Instruments

MAX3243ECPW - 500kbps RS-232 Transceiver | Texas Instruments

MPN: MAX3243ECPW ✗ জীবনকালের সমাপ্তি
3 V to 5.5 V Vdss 28-pin TSSOP Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MAX3243ECPW সারাংশ

The Texas Instruments MAX3243ECPW is a 3 V to 5.5 V multichannel RS-232 line driver and receiver capable of operation at 500 kbps, with three drivers, five receivers, and a 28-pin TSSOP package. Its serial-port pins provide ±15 kV ESD protection for HBM, IEC 61000-4-2 air-gap discharge, and ±8 kV IEC 61000-4-2 contact-discharge conditions. The device also includes a dual charge-pump circuit that converts the supply into the bipolar voltage required by RS-232 line drivers.

An RS-232 transceiver is an interface IC that converts logic-level signals from a host or controller into RS-232-compatible levels, while receiving and converting remote RS-232 signals back into CMOS-compatible logic. The MAX3243E belongs to the RS-232 interface family within the broader interface-IC and semiconductor hierarchy. Its three-driver, five-receiver arrangement supports asymmetrical data flows, such as a PC serial port receiving five incoming lines while transmitting on three lines.

Key features include a 3 V to 5.5 V supply range, 500 kbps operation, three RS-232 drivers, five RS-232 receivers, and enhanced ESD protection on the serial connections. The 500 kbps capability makes the device suitable for legacy serial peripherals, industrial controllers, data-acquisition equipment, and embedded systems that still use RS-232 links. The five receivers also allow multiple status or handshake inputs without requiring additional transceiver channels.

The integrated charge-pump architecture generates the positive and negative voltage swings required by the RS-232 interface while allowing operation from a single low-voltage supply. The MAX3243E meets the requirements of TIA/EIA-232-F. Control functions support low-power interface management, and the device is intended for systems that require a compact multichannel solution rather than several separate single-channel transceivers.

Typical applications include industrial serial controllers, laboratory data loggers, programmable instrumentation, point-of-sale systems, security equipment, and embedded control boards. In these systems, the device can connect a microcontroller or UART to a DB9, RJ45-based, or board-level RS-232 connector. Selection should account for signal polarity, automatic shutdown requirements, cable length, and the electrical protection requirements of the connected port.

Place the charge-pump capacitors and interface bypass capacitors close to their designated pins, and route driver outputs and receiver inputs away from sensitive digital clocks. Keep the RS-232 connector-side traces away from low-level analog inputs to minimize capacitive coupling. Confirm the exact connector mapping, enable polarity, and shutdown behavior against the manufacturer datasheet before finalizing a new PCB.

This page combines manufacturer specifications, lifecycle information, package details, and application-oriented guidance for engineers assessing the MAX3243ECPW as a multichannel RS-232 interface. The MAX3243ECPW is marked no longer in production by Texas Instruments, so lifecycle planning and sourcing continuity are central considerations for new and legacy designs.

এর জন্য ড্রপ-ইন বিকল্প MAX3243ECPW — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible MAX3243ECPW (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Maximum Data Rate.

STMicroelectronics
Package: 28-TSSOP (0.173, 4.40 mm Width)
Maximum Data Rate: 400 kbps
এর সাথে তুলনা করুন MAX3243ECPW →

MAX3243EIPWR

✅ ড্রপ-ইন
Texas Instruments
📦 28-pin TSSOP
Multichannel RS-232 line driver/receiver · 3 V to 5.5 V · 500 kbps · 3 channels · 5 channels · 3.3 V · plus or minus 15 kV IEC ESD protection · -40°C to +85°C

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MAX3243ECPWG4

✅ ড্রপ-ইন
Texas Instruments
📦 28-pin TSSOP
Multichannel RS-232 line driver/receiver · 3 · 5 · 3 V to 5.5 V · 500 kbps · ±15 kV IEC ESD protection · Full duplex · 500 mV

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

TRS3243EIPW

✅ ড্রপ-ইন
📦 28-pin TSSOP
Same 28-pin class and RS-232 channel arrangement, but the reported maximum data rate is 120 kbps versus 500 kbps for the target.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MAX3243ECPW বিশেষণ

Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 500 kbps
Number of Drivers 3
Number of Receivers 5
Interface Standard TIA/EIA-232-F
HBM ESD Protection ±15 kV
IEC 61000-4-2 Air-Gap ESD Protection ±15 kV
IEC 61000-4-2 Contact ESD Protection ±8 kV
Charge-Pump Configuration Dual charge-pump circuit
প্যাকেজ 28-pin TSSOP
মাউন্টিং টাইপ Surface mount
RoHS স্ট্যাটাস Compliant
Lead-Free Status Yes

MAX3243ECPW 28-pin tssop পিন কনফিগারেশন গাইড

MAX3243ECPW (28-pin tssop প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

MAX3243ECPW-এর জন্য 28-pin tssop প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MAX3243ECPW.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

MAX3243ECPW এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Serial Controller Interface, Data-Acquisition and Laboratory Equipment, Point-of-Sale and Retail Terminal, Security and Access-Control Equipment, Embedded UART-to-RS-232 Bridging, Programmable Instrumentation and Service Ports.

🏭

Industrial Serial Controller Interface

The MAX3243ECPW fits legacy industrial controllers that must translate UART logic into RS-232 levels for a fieldbus accessory or service port. Its 3 V to 5.5 V supply range supports embedded and industrial logic environments, while the three drivers cover outgoing command paths. Five receivers are useful for acknowledgements, remote commands, and equipment-status lines. The 500 kbps rating provides more margin than older 120 kbps interfaces, although the exact operating-temperature grade and production status must be confirmed before a new production release.

🖥️

Data-Acquisition and Laboratory Equipment

The MAX3243ECPW can connect an instrument controller to external sensors, analyzers, or legacy peripherals through RS-232. Three driver channels support outbound commands, and five receiver channels can monitor data-ready signals, acknowledgements, and operating status without adding separate receiver ICs. Operating from 3 V to 5.5 V allows use with modern controller logic while retaining compatibility with older RS-232 equipment. The protected connector-side pins add useful robustness for laboratory installations where cables may be handled frequently.

💳

Point-of-Sale and Retail Terminal

The MAX3243ECPW is suitable for point-of-sale terminals and peripheral controllers that retain a wired RS-232 connection for scales, printers, or customer displays. Three driver channels can carry outbound transaction or control data, while five receivers can support multiple acknowledgement and status inputs. Its 500 kbps capability is more than adequate for typical point-of-sale traffic and offers additional margin over slower transceivers. For new point-of-sale platforms, verify supply sequencing, connector protection, and lifecycle continuity against the current product status.

🎥

Security and Access-Control Equipment

The MAX3243ECPW can bridge a controller UART to RS-232 accessories such as readers, alarm interfaces, and configuration adapters. Its five receiver channels are valuable when a system needs multiple acknowledgement or status inputs in addition to three outbound communication lines. The ±15 kV HBM and air-gap ESD ratings, together with ±8 kV IEC contact-discharge protection, support robust handling of exposed connector pins. These protections complement, rather than replace, enclosure grounding, cable design, and system-level surge protection.

🔧

Embedded UART-to-RS-232 Bridging

The MAX3243ECPW provides a straightforward interface between a microcontroller UART and an external RS-232 port. The logic-side supply range of 3 V to 5.5 V suits both 3.3 V and 5 V system rails, and the integrated dual charge pump generates the bipolar voltage required by the transmitters. With three transmit and five receive channels, it accommodates richer control links than a one-driver, one-receiver transceiver. PCB layout should keep charge-pump and bypass capacitors close to their pins and preserve clear separation between connector-side and logic-side return paths.

📟

Programmable Instrumentation and Service Ports

The MAX3243ECPW is useful in programmable instruments and service equipment that expose an RS-232 configuration or maintenance port. Its 500 kbps capability supports efficient command exchange, while three drivers and five receivers can service multiple handshake lines. The dual charge-pump design eliminates a separate negative supply rail, simplifying system power architecture. When adding the device to a new instrument, first compare the current ordering variant's lifecycle and temperature grade with the requirement for sustained production.

What is the MAX3243ECPW?
The MAX3243ECPW is a 3 V to 5.5 V, 500 kbps multichannel RS-232 transceiver with three line drivers and five line receivers. According to the Texas Instruments MAX3243E datasheet, it includes a dual charge-pump circuit and protected serial-port connections. The device is packaged in a 28-pin TSSOP and provides the electrical interface between an asynchronous communication controller and an RS-232 connection.
What is the maximum data rate of the MAX3243ECPW?
The MAX3243ECPW supports a maximum data rate of 500 kbps. Texas Instruments identifies the device as a 3 V to 5.5 V multichannel RS-232 line driver and receiver, while the non-E MAX3243 family is rated for 250 kbps. This distinction is important when comparing the MAX3243ECPW with the original MAX3243 rather than treating the two as identical performance devices.
How many RS-232 drivers and receivers does the MAX3243ECPW have?
The MAX3243ECPW contains three RS-232 line drivers and five RS-232 line receivers. According to the Texas Instruments product description, this asymmetrical channel arrangement is intended for asynchronous communication systems in which more incoming status or data lines are required than outgoing lines. The receiver outputs and driver inputs expose different logic-side functions on the 28-pin TSSOP.
What ESD protection does the MAX3243ECPW provide?
The MAX3243ECPW provides ±15 kV ESD protection for HBM and IEC 61000-4-2 air-gap discharge, plus ±8 kV for IEC 61000-4-2 contact discharge. According to the Texas Instruments MAX3243E datasheet, these ratings apply to the serial-port connection pins. The protection ratings assist with connector exposure, but they do not replace normal surge and ESD design practices.
Is the MAX3243ECPW still in production?
The MAX3243ECPW is marked no longer in production by Texas Instruments. The MAX3243E family page remains active, but the exact MAX3243ECPW ordering entry is no longer in production. For new production quantities, evaluate a current family member or another qualified 28-pin TSSOP transceiver; for maintenance, confirm availability and lifecycle through the Request a Quote form on this page.
Where can I download the MAX3243ECPW datasheet PDF?
The MAX3243ECPW datasheet is available through the Texas Instruments MAX3243E product documentation and the linked manufacturer PDF. The document is titled for the MAX3243E 3 V to 5.5 V multichannel RS-232 line driver and receiver and contains the electrical characteristics, pin descriptions, charge-pump requirements, and application information needed for design review.
Where is the MAX3243ECPW pinout located?
The MAX3243ECPW pinout is located in the pin-description table and package drawing in the Texas Instruments MAX3243E datasheet. The exact ordering code uses a 28-pin TSSOP package. Use that table when assigning connector signals because receiver outputs, driver inputs, supply rails, control inputs, and charge-pump capacitor pins serve different circuit roles.
What is the difference between the MAX3243ECPW and MAX3243EIPWR?
The MAX3243ECPW and MAX3243EIPWR are both 28-pin TSSOP MAX3243E-family transceivers, but their ordering codes identify different orderable variants. The MAX3243ECPWG4 comparison data also identifies matching terminals and package characteristics. Before substitution, check operating-temperature grade, production status, packing method, and the specific pin-level configuration in the manufacturer ordering table.
Is the TRS3243EIPW a drop-in replacement for the MAX3243ECPW?
The TRS3243EIPW can serve as a candidate replacement because it is associated with the same 28-pin interface family, but it is not a guaranteed drop-in replacement without a full pin and electrical comparison. One comparison source rates the MAX3243ECPW at 500 kbps and the TRS3243EIPW at 120 kbps, a substantial bandwidth difference. Verify every pin, supply condition, control polarity, and lifecycle requirement before redesign.
When should I choose the MAX3243ECPW over another RS-232 transceiver?
Choose the MAX3243ECPW when the existing design requires a 28-pin TSSOP footprint, three drivers, five receivers, 3 V to 5.5 V operation, and up to 500 kbps signaling. It is particularly relevant when maintaining an established board with documented pin assignments. For a new design, a currently produced transceiver may be preferable because the exact MAX3243ECPW ordering entry is no longer in production.
Is the MAX3243ECPW suitable for industrial equipment?
The MAX3243ECPW is functionally suitable for RS-232 interfaces in industrial equipment when its electrical limits and operating-temperature grade match the system requirements. Its 3 V to 5.5 V supply range, 500 kbps data rate, five receivers, and protected connector pins fit many legacy controller and data-acquisition designs. Confirm temperature range, EMC requirements, and current lifecycle status before releasing production hardware.
What can replace the MAX3243ECPW?
The MAX3243ECPW can be approached through same-family MAX3243E 28-pin TSSOP variants, including MAX3243EIPWR and MAX3243ECPWG4, subject to lifecycle and temperature checks. The TRS3243EIPW is another candidate, but its reported 120 kbps rating is below the target's 500 kbps capability. No replacement should be approved without a complete pin-level and electrical comparison.
Is the MAX3243ECPW the same as the MAX3243ECPWR?
No, the MAX3243ECPW and MAX3243ECPWR use different orderable suffixes and may differ in packing method even though both denote the MAX3243ECPW device in a 28-pin TSSOP. A packing-only change does not alter electrical function, but it can affect procurement, incoming inspection, and assembly handling. Verify the manufacturer's ordering information for each suffix.
What are the key specifications engineers should know about the MAX3243ECPW?
The MAX3243ECPW combines a 3 V to 5.5 V supply range, 500 kbps operation, three line drivers, five line receivers, and a 28-pin TSSOP package. According to the Texas Instruments MAX3243E datasheet, its connection pins support ±15 kV HBM and IEC 61000-4-2 air-gap ESD protection, as well as ±8 kV contact-discharge protection. The exact ordering entry is no longer in production.
Where can I buy the MAX3243ECPW, and what is its price and lead time?
Use the Request a Quote form on this page to ask about MAX3243ECPW price, stock, minimum order quantity, and production lead time. Texas Instruments marks the exact MAX3243ECPW ordering entry as no longer in production, so allocation and obsolescence planning may affect the response. The form is the appropriate channel for an exact-MPN commercial request rather than relying on a historical catalog amount.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MAX3243ECPW — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the MAX3243ECPW when maintaining an existing 28-pin TSSOP RS-232 design that requires three drivers, five receivers, a 3 V to 5.5 V supply, and up to 500 kbps operation. Its protected connector-side pins make it suitable for exposed legacy ports. For a new high-volume design, first compare currently produced same-footprint options because the exact MAX3243ECPW ordering entry is no longer in production. MAX3243EIPWR is the closest family candidate when its ordering details meet the temperature and packing requirements. MAX3243ECPWG4 is another same-package candidate with matching terminals and consistent characteristics. TRS3243EIPW is suitable only when 120 kbps operation is sufficient and every control and signal pin has been verified. Final approval should include schematic equivalence, timing, ESD, temperature, and lifecycle review.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য MAX3243EIPWR MAX3243ECPWG4 TRS3243EIPW
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP
Maximum Data Rate 500 kbps 500 kbps class 500 kbps class 120 kbps
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V
Number of Drivers 3 3 3 3
Number of Receivers 5 5 5 5

মূল পার্থক্যসমূহ

  • Higher specified signaling rate than the TRS3243EIPW candidate (বনামTRS3243EIPW)
  • Same-family protected serial interface (বনামMAX3243ECPWG4)
  • Drop-in candidate with the same TSSOP footprint (বনামMAX3243EIPWR)

ডিজাইন নোট

Place the two charge-pump capacitors and all supply bypass capacitors directly beside their associated pins, following the manufacturer layout example. Keep the capacitor return connections short and avoid routing connector-side return current beneath digital clock or UART logic. For a 28-pin TSSOP, check the exposed pad only if the selected package drawing specifies one; the MAX3243ECPW ordering entry is identified as a standard TSSOP variant.

Do not treat the MAX3243E 500 kbps rating as interchangeable with the original MAX3243 family's 250 kbps rating. Likewise, the TRS3243EIPW is reported at 120 kbps and therefore should not replace the target in a design that uses the full 500 kbps data rate. Confirm the complete pin description, control polarity, automatic-shutdown behavior, and temperature grade for the exact proposed ordering code.

Separate the logic-side UART traces from the three RS-232 driver outputs and five receiver inputs. Route the connector-side signals away from sensitive analog nodes and keep logic return paths independent where practical. This matters because driver outputs are high-amplitude bipolar signals even though the IC operates from a single 3 V to 5.5 V supply. Good separation reduces capacitive crosstalk into the receiver thresholds and UART logic.

Size the supply path for the MAX3243ECPW's normal operating current plus charge-pump and driver load transitions. The integrated dual charge pump supplies the bipolar driver levels, but input decoupling and loop area still determine transient behavior. Use the manufacturer-recommended capacitor types and values, verify the supply ramp against enable or shutdown timing, and avoid adding large bulk capacitance directly across the charge-pump nodes.

কমপ্লায়েন্স তথ্য

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Yes
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The RoHS and lead-free attributes are identified in the component comparison data. No automotive qualification, REACH declaration, halogen-free statement, or conflict-minerals declaration is established for the exact ordering code.

ডেটা যাচাই করা হয়েছে: 2026-11-17 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

MAX3243ECPW datasheet MAX3243ECPW pinout MAX3243ECPW datasheet pdf MAX3243ECPW equivalent MAX3243ECPW replacement MAX3243ECPW cross reference MAX3243ECPW vs MAX3243EIPWR MAX3243ECPW vs TRS3243EIPW MAX3243ECPW 500kbps RS-232 MAX3243ECPW 28-pin TSSOP MAX3243ECPW industrial interface MAX3243ECPW price MAX3243ECPW stock Texas Instruments MAX3243ECPW MAX3243ECPW ESD protection

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments MAX3243ECPW MAX3243E MAX3243EIPWR MAX3243ECPWG4 TRS3243EIPW RS-232 transceiver multichannel line driver and receiver interface IC semiconductor TIA/EIA-232-F IEC 61000-4-2 ESD protection HBM dual charge-pump 500 kbps 3 V to 5.5 V 28-pin TSSOP TSSOP family surface mount SMD UART industrial control data acquisition RoHS
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন