MAX3243ECPW - 500kbps RS-232 Transceiver | Texas Instruments
MPN: MAX3243ECPW ✗ Tapus ng BuhayMAX3243ECPW Ulas
An RS-232 transceiver is an interface IC that converts logic-level signals from a host or controller into RS-232-compatible levels, while receiving and converting remote RS-232 signals back into CMOS-compatible logic. The MAX3243E belongs to the RS-232 interface family within the broader interface-IC and semiconductor hierarchy. Its three-driver, five-receiver arrangement supports asymmetrical data flows, such as a PC serial port receiving five incoming lines while transmitting on three lines.
Key features include a 3 V to 5.5 V supply range, 500 kbps operation, three RS-232 drivers, five RS-232 receivers, and enhanced ESD protection on the serial connections. The 500 kbps capability makes the device suitable for legacy serial peripherals, industrial controllers, data-acquisition equipment, and embedded systems that still use RS-232 links. The five receivers also allow multiple status or handshake inputs without requiring additional transceiver channels.
The integrated charge-pump architecture generates the positive and negative voltage swings required by the RS-232 interface while allowing operation from a single low-voltage supply. The MAX3243E meets the requirements of TIA/EIA-232-F. Control functions support low-power interface management, and the device is intended for systems that require a compact multichannel solution rather than several separate single-channel transceivers.
Typical applications include industrial serial controllers, laboratory data loggers, programmable instrumentation, point-of-sale systems, security equipment, and embedded control boards. In these systems, the device can connect a microcontroller or UART to a DB9, RJ45-based, or board-level RS-232 connector. Selection should account for signal polarity, automatic shutdown requirements, cable length, and the electrical protection requirements of the connected port.
Place the charge-pump capacitors and interface bypass capacitors close to their designated pins, and route driver outputs and receiver inputs away from sensitive digital clocks. Keep the RS-232 connector-side traces away from low-level analog inputs to minimize capacitive coupling. Confirm the exact connector mapping, enable polarity, and shutdown behavior against the manufacturer datasheet before finalizing a new PCB.
This page combines manufacturer specifications, lifecycle information, package details, and application-oriented guidance for engineers assessing the MAX3243ECPW as a multichannel RS-232 interface. The MAX3243ECPW is marked no longer in production by Texas Instruments, so lifecycle planning and sourcing continuity are central considerations for new and legacy designs.
Mga alternatibo na pwedeng ilagay na MAX3243ECPW — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok MAX3243ECPW (parehas na form factor at footprint) — pagkakaiba sa Package, Maximum Data Rate.
MAX3243EIPWR
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →MAX3243ECPWG4
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →TRS3243EIPW
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MAX3243ECPW Mga Spesipikasyon
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 500 kbps |
| Number of Drivers | 3 |
| Number of Receivers | 5 |
| Interface Standard | TIA/EIA-232-F |
| HBM ESD Protection | ±15 kV |
| IEC 61000-4-2 Air-Gap ESD Protection | ±15 kV |
| IEC 61000-4-2 Contact ESD Protection | ±8 kV |
| Charge-Pump Configuration | Dual charge-pump circuit |
| Packhaging | 28-pin TSSOP |
| Uri ng Pagpapasok | Surface mount |
| Tindminan RoHS | Compliant |
| Lead-Free Status | Yes |
Gabay sa Pin Configuration ng MAX3243ECPW 28-pin tssop
Pin configuration para sa MAX3243ECPW (28-pin tssop package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa MAX3243ECPW.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
MAX3243ECPW ay nararapat para sa 6 aplikasyons: Industrial Serial Controller Interface, Data-Acquisition and Laboratory Equipment, Point-of-Sale and Retail Terminal, Security and Access-Control Equipment, Embedded UART-to-RS-232 Bridging, Programmable Instrumentation and Service Ports.
Industrial Serial Controller Interface
The MAX3243ECPW fits legacy industrial controllers that must translate UART logic into RS-232 levels for a fieldbus accessory or service port. Its 3 V to 5.5 V supply range supports embedded and industrial logic environments, while the three drivers cover outgoing command paths. Five receivers are useful for acknowledgements, remote commands, and equipment-status lines. The 500 kbps rating provides more margin than older 120 kbps interfaces, although the exact operating-temperature grade and production status must be confirmed before a new production release.
Inirekomenda
Data-Acquisition and Laboratory Equipment
The MAX3243ECPW can connect an instrument controller to external sensors, analyzers, or legacy peripherals through RS-232. Three driver channels support outbound commands, and five receiver channels can monitor data-ready signals, acknowledgements, and operating status without adding separate receiver ICs. Operating from 3 V to 5.5 V allows use with modern controller logic while retaining compatibility with older RS-232 equipment. The protected connector-side pins add useful robustness for laboratory installations where cables may be handled frequently.
Inirekomenda
Point-of-Sale and Retail Terminal
The MAX3243ECPW is suitable for point-of-sale terminals and peripheral controllers that retain a wired RS-232 connection for scales, printers, or customer displays. Three driver channels can carry outbound transaction or control data, while five receivers can support multiple acknowledgement and status inputs. Its 500 kbps capability is more than adequate for typical point-of-sale traffic and offers additional margin over slower transceivers. For new point-of-sale platforms, verify supply sequencing, connector protection, and lifecycle continuity against the current product status.
Inirekomenda
Security and Access-Control Equipment
The MAX3243ECPW can bridge a controller UART to RS-232 accessories such as readers, alarm interfaces, and configuration adapters. Its five receiver channels are valuable when a system needs multiple acknowledgement or status inputs in addition to three outbound communication lines. The ±15 kV HBM and air-gap ESD ratings, together with ±8 kV IEC contact-discharge protection, support robust handling of exposed connector pins. These protections complement, rather than replace, enclosure grounding, cable design, and system-level surge protection.
Inirekomenda
Embedded UART-to-RS-232 Bridging
The MAX3243ECPW provides a straightforward interface between a microcontroller UART and an external RS-232 port. The logic-side supply range of 3 V to 5.5 V suits both 3.3 V and 5 V system rails, and the integrated dual charge pump generates the bipolar voltage required by the transmitters. With three transmit and five receive channels, it accommodates richer control links than a one-driver, one-receiver transceiver. PCB layout should keep charge-pump and bypass capacitors close to their pins and preserve clear separation between connector-side and logic-side return paths.
Inirekomenda
Programmable Instrumentation and Service Ports
The MAX3243ECPW is useful in programmable instruments and service equipment that expose an RS-232 configuration or maintenance port. Its 500 kbps capability supports efficient command exchange, while three drivers and five receivers can service multiple handshake lines. The dual charge-pump design eliminates a separate negative supply rail, simplifying system power architecture. When adding the device to a new instrument, first compare the current ordering variant's lifecycle and temperature grade with the requirement for sustained production.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for MAX3243ECPW — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | MAX3243EIPWR | MAX3243ECPWG4 | TRS3243EIPW |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 28-pin TSSOP | 28-pin TSSOP | 28-pin TSSOP | 28-pin TSSOP |
| Maximum Data Rate | 500 kbps | 500 kbps class | 500 kbps class | 120 kbps |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V |
| Number of Drivers | 3 | 3 | 3 | 3 |
| Number of Receivers | 5 | 5 | 5 | 5 |
Pangunahing mga Pagkakaiba
- Higher specified signaling rate than the TRS3243EIPW candidate (kumpara saTRS3243EIPW)
- Same-family protected serial interface (kumpara saMAX3243ECPWG4)
- Drop-in candidate with the same TSSOP footprint (kumpara saMAX3243EIPWR)
Talaan ng Disenyo
Place the two charge-pump capacitors and all supply bypass capacitors directly beside their associated pins, following the manufacturer layout example. Keep the capacitor return connections short and avoid routing connector-side return current beneath digital clock or UART logic. For a 28-pin TSSOP, check the exposed pad only if the selected package drawing specifies one; the MAX3243ECPW ordering entry is identified as a standard TSSOP variant.
Do not treat the MAX3243E 500 kbps rating as interchangeable with the original MAX3243 family's 250 kbps rating. Likewise, the TRS3243EIPW is reported at 120 kbps and therefore should not replace the target in a design that uses the full 500 kbps data rate. Confirm the complete pin description, control polarity, automatic-shutdown behavior, and temperature grade for the exact proposed ordering code.
Separate the logic-side UART traces from the three RS-232 driver outputs and five receiver inputs. Route the connector-side signals away from sensitive analog nodes and keep logic return paths independent where practical. This matters because driver outputs are high-amplitude bipolar signals even though the IC operates from a single 3 V to 5.5 V supply. Good separation reduces capacitive crosstalk into the receiver thresholds and UART logic.
Size the supply path for the MAX3243ECPW's normal operating current plus charge-pump and driver load transitions. The integrated dual charge pump supplies the bipolar driver levels, but input decoupling and loop area still determine transient behavior. Use the manufacturer-recommended capacitor types and values, verify the supply ramp against enable or shutdown timing, and avoid adding large bulk capacitance directly across the charge-pump nodes.
Impormasyon ng Pagsunod sa Kautusan
The RoHS and lead-free attributes are identified in the component comparison data. No automotive qualification, REACH declaration, halogen-free statement, or conflict-minerals declaration is established for the exact ordering code.