Texas Instruments

MAX3243MDBREP - 3V/5.5V 250kbps RS-232 Transceiver | TI

MPN: MAX3243MDBREP ✓ সক্রিয়
3 V to 5.5 V Vdss 28-pin SSOP Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MAX3243MDBREP সারাংশ

Texas Instruments MAX3243MDBREP is a 3 V to 5.5 V multichannel RS-232 line driver and receiver operating at up to 250 kbps, with ±15 kV human-body-model ESD protection and a 28-pin SSOP package. The device provides three line drivers, five line receivers, and a dual charge-pump circuit for generating the bipolar voltages required by RS-232 line drivers.

An RS-232 transceiver is an interface IC that converts logic-level signals from a host, controller, or peripheral into RS-232-compatible line levels and converts received line-level signals back into digital logic. The MAX3243 belongs to the interface IC, communications transceiver, and RS-232 line-driver/receiver hierarchy. Its multichannel arrangement supports equipment that requires several data lines but not a full nine-line desktop serial port.

The MAX3243 operates from a single 3 V to 5.5 V supply, allowing operation from 3.3 V and 5 V systems. Its 250 kbps data rate is suitable for asynchronous serial links whose required baud rate remains below that operating limit. Pin-to-pin ESD protection of ±15 kV applies to the serial-port connection pins, including ground, according to the Texas Instruments MAX3243 datasheet.

Internally, the MAX3243 combines three drivers, five receivers, and a dual charge-pump circuit. The charge pump generates the positive and negative voltage rails needed by the line drivers while allowing operation from a low-voltage single supply. The interface meets the electrical requirements of TIA/EIA-232-F and is intended to sit between an asynchronous communication controller and a serial-port connector.

Typical uses include industrial control equipment, instrumentation, data acquisition systems, point-of-sale terminals, and embedded serial interfaces. The three transmitters and five receivers make the device useful for designs combining several command, status, and data paths while keeping the external power supply simple. The enhanced-product ordering option is suited to applications requiring the military temperature range and enhanced environmental screening.

Layout is critical because RS-232 driver outputs carry high-voltage transitions, while receiver inputs are sensitive to electrical noise. Keep charge-pump and receiver-capacitor connections short, provide a solid ground reference, and route serial traces away from clocks, switching nodes, and high-current return paths. Confirm that the selected external capacitors satisfy the datasheet recommendations and that connector-side protection is coordinated with the IC's ±15 kV HBM rating.

This product guide combines the manufacturer's electrical specifications, ordering information, package details, and practical RS-232 design guidance. It also identifies the verified pin-compatible MAX3243IDBR option while clearly separating package, temperature, and qualification differences that must be reviewed before design substitution.

এর জন্য ড্রপ-ইন বিকল্প MAX3243MDBREP — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible MAX3243MDBREP (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Product Type, Supply Voltage Range.

Texas Instruments
Package: 28-pin SSOP (DB)
Product Type: Multichannel RS-232 line driver/receiver
Supply Voltage Range: 3.0 V to 5.5 V
এর সাথে তুলনা করুন MAX3243MDBREP →

MAX3243IDBR

✅ ড্রপ-ইন
Texas Instruments
📦 28-pin SSOP
Multichannel RS-232 line driver/receiver · 3.0 V to 5.5 V · 3.3 V · 250 kbps · 3 drivers · 5 receivers · ±15 kV HBM · RS-232 and CMOS

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MAX3243MDBREP বিশেষণ

Product Type Multichannel RS-232 line driver and receiver
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbps
Line Drivers 3
Line Receivers 5
Charge-Pump Circuits 2
ESD Protection ±15 kV HBM
অপারেটিং তাপমাত্রার পরিসর -55 °C to +125 °C
প্যাকেজ 28-pin SSOP
Terminal Count 28
মাউন্টিং টাইপ Surface mount
Package Shape Rectangular gull-wing
RS-232 Standard Compliance TIA/EIA-232-F
Interface Function Electrical interface between an asynchronous communication controller and a serial-port connector
Logic Supply Single 3 V to 5.5 V supply

MAX3243MDBREP rectangular gull-wing পিন কনফিগারেশন গাইড

MAX3243MDBREP (rectangular gull-wing প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

MAX3243MDBREP-এর জন্য rectangular gull-wing প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MAX3243MDBREP.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

MAX3243MDBREP এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Control Systems, Data Acquisition and Instrumentation, Embedded Serial Interfaces, Security and Access Equipment, Point-of-Sale Terminals, Communication Port Expansion.

🏭

Industrial Control Systems

The MAX3243MDBREP is well suited to industrial controllers that exchange command, status, and sensor data over RS-232. Its three line drivers and five receivers support multiple channels from one 3 V to 5.5 V supply, while the 250 kbps rate covers many asynchronous control protocols. The -55 °C to +125 °C operating range is useful in equipment exposed to wide temperature conditions. Place the transceiver between the controller UART and a protected connector, and route charge-pump and receiver paths away from switching nodes.

🖥️

Data Acquisition and Instrumentation

The MAX3243MDBREP can connect laboratory and process instruments that use several RS-232 signals but do not require a complete desktop serial-port implementation. Three transmitter channels and five receiver channels provide asymmetric connectivity for commands, measurements, acknowledgments, and status flags. Operation from 3.3 V or 5 V systems reduces supply complexity, while 250 kbps operation supports many measurement-control protocols. Use a solid analog ground and shielded cable, and confirm the selected baud rate against cable length and capacitive loading.

🔧

Embedded Serial Interfaces

The MAX3243MDBREP provides a compact interface between an embedded asynchronous controller and an RS-232 port. A single 3 V to 5.5 V supply supports both the logic-side environment and the charge-pump circuitry, while the three drivers can carry outgoing commands or status signals. The five receivers can monitor incoming data and handshake lines. At 250 kbps maximum rate, the device accommodates many embedded protocols. Confirm the UART's signal levels, inversion requirements, and flow-control timing against the family datasheet.

🧩

Security and Access Equipment

The MAX3243MDBREP can interface access-control, alarm, and security equipment that uses several RS-232 control lines. The multiple receivers support incoming sensor states, acknowledgments, and fault signals, while the three drivers support outbound commands. Its ±15 kV HBM protection on the serial-port connection pins adds a useful board-level defense where cables are present. The 250 kbps rate is suitable for common configuration and status protocols. Connector selection, ground bonding, and external surge protection remain important parts of a robust interface.

🖥️

Point-of-Sale Terminals

The MAX3243MDBREP is appropriate for point-of-sale peripherals that need a compact RS-232 interface for receipt printers, scales, customer displays, or service terminals. Three drivers and five receivers permit several control and status paths without requiring three separate transceivers. Its 3 V to 5.5 V supply range allows use with common embedded systems, and the 250 kbps limit suits typical peripheral data rates. Keep the connector and logic sections separated by a clear ground strategy to reduce noise coupling in compact equipment.

🌐

Communication Port Expansion

The MAX3243MDBREP can add RS-232 connectivity to a controller that has limited serial resources. Its three drivers and five receivers enable asymmetric port expansion for command, response, and status lines while retaining a simple single-supply design. The device operates up to 250 kbps and provides ±15 kV HBM protection on serial connection pins, including ground. When expanding ports, maintain consistent logic levels across the system and verify that the additional lines do not exceed the host controller's pin or timing constraints.

What is the MAX3243MDBREP?
The MAX3243MDBREP is a Texas Instruments 3 V to 5.5 V multichannel RS-232 transceiver containing three line drivers, five line receivers, and two charge-pump circuits. According to the MAX3243 datasheet, it provides a maximum data rate of 250 kbps and ±15 kV HBM ESD protection on the serial-port connection pins, including ground.
What is the operating voltage of MAX3243MDBREP?
The MAX3243MDBREP operates from a single 3 V to 5.5 V supply. The Texas Instruments MAX3243 datasheet identifies 3 V and 5 V supply operation as central features of the device, making it suitable for interfacing 3.3 V or 5 V logic controllers with RS-232 links. The charge pumps generate the bipolar line-driver voltage internally.
How many RS-232 drivers and receivers does MAX3243MDBREP contain?
The MAX3243MDBREP contains three RS-232 line drivers and five RS-232 line receivers. The Texas Instruments product page and datasheet identify this arrangement together with two charge-pump circuits. This channel imbalance is useful for systems that need several transmit paths and an even larger number of receive or status paths.
What is the maximum data rate of MAX3243MDBREP?
The MAX3243MDBREP supports asynchronous RS-232 communication at up to 250 kbps. According to the Texas Instruments MAX3243 product page and datasheet, this rate is suitable for many industrial, instrumentation, control, and embedded serial interfaces. Confirm cable capacitance, baud-rate tolerance, and system timing before selecting the maximum operating rate.
What ESD protection does MAX3243MDBREP provide?
The MAX3243MDBREP provides ±15 kV human-body-model ESD protection pin to pin on the serial-port connection pins, including ground. The Texas Instruments MAX3243 datasheet describes this protection for the external RS-232 connections. It does not remove the need for suitable chassis grounding, cable design, and connector-level surge protection.
Does MAX3243MDBREP meet TIA/EIA-232-F?
Yes, the MAX3243MDBREP meets the electrical requirements of TIA/EIA-232-F. According to the Texas Instruments MAX3243 product page, the device provides the electrical interface between an asynchronous communication controller and a serial-port connector. Compliance should be assessed for the complete channel, including cable, connector, grounding, and protection components.
Where can I download the MAX3243MDBREP datasheet PDF?
The official MAX3243MDBREP datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/max3243.pdf. The manufacturer datasheet contains the electrical characteristics, charge-pump configuration, pin descriptions, typical application information, and package dimensions required to evaluate and implement the device.
Where can I find the MAX3243MDBREP pinout?
The MAX3243MDBREP pinout is shown in the Texas Instruments MAX3243 datasheet under the Pin Description and Pin Configuration sections. The device uses a 28-pin SSOP package with three driver outputs, five receiver inputs, receiver outputs, power terminals, ground pins, charge-pump nodes, and shutdown-control functions. Use that pin table directly when assigning PCB nets.
Can MAX3243IDBR replace MAX3243MDBREP?
The MAX3243IDBR is a 28-pin SSOP RS-232 transceiver that can serve as a candidate replacement, but it is not an unconditional functional match. The MAX3243MDBREP is specified from -55 °C to +125 °C, while the verified MAX3243IDBR listing identifies a 28-SSOP industrial-temperature option. The MAX3243 family data sheet should be checked for every electrical limit, production status, and qualification requirement.
What is the best drop-in replacement for MAX3243MDBREP?
The MAX3243IDBR is the verified same-package candidate for the MAX3243MDBREP because both use a 28-pin SSOP package and implement the same MAX3243 multichannel RS-232 function. It must be qualified against temperature range, automotive or enhanced-product requirements, ESD expectations, and lifecycle requirements. Use the Request a Quote form on this page for current availability and sourcing support.
When should I choose MAX3243MDBREP instead of MAX3243IDBR?
Choose the MAX3243MDBREP when the design requires its specified -55 °C to +125 °C operating range or enhanced-product ordering characteristics. The MAX3243IDBR may be appropriate for less demanding industrial-temperature applications. Because the devices share the MAX3243 family architecture, compare the ordering information and electrical tables rather than assuming every grade is interchangeable.
Is MAX3243MDBREP suitable for industrial control systems?
Yes, the MAX3243MDBREP is suitable for many industrial control and instrumentation systems because it combines three drivers, five receivers, a 3 V to 5.5 V supply range, 250 kbps operation, and ±15 kV HBM ESD protection. Its -55 °C to +125 °C specification supports wide environmental range. Final suitability depends on system grounding, isolation, cable length, and qualification requirements.
Where can I buy MAX3243MDBREP online?
Use the Request a Quote form on this page to request MAX3243MDBREP pricing, stock confirmation, and lead time from XAIPART. The component is a 28-pin SSOP RS-232 transceiver rated for 3 V to 5.5 V operation and -55 °C to +125 °C. Submit the required quantity, target date, and shipping destination with your request.
What is the price of MAX3243MDBREP?
Current commercial terms for the MAX3243MDBREP are presented through the Request a Quote form on this page. The structured price may change with quantity, market conditions, and requested delivery schedule. For engineering comparison, the MAX3243IDBR is a 28-SSOP family candidate, but its temperature grade and qualification must be checked before substitution.
Is MAX3243MDBREP in stock and what is its lead time?
Current stock and lead time for the MAX3243MDBREP can be requested through the Request a Quote form on this page. State the required quantity, reel format, production quantity, and target delivery date. Because inventory and scheduling can change rapidly, avoid basing a production schedule on a generic market listing rather than a confirmed quotation.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MAX3243MDBREP — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the MAX3243MDBREP when the application needs three RS-232 transmitters, five receivers, a single 3 V to 5.5 V supply, and an operating range extending to -55 °C and +125 °C. It is particularly appropriate for enhanced industrial environments or programs that specify the enhanced-product ordering option. The MAX3243IDBR uses the same 28-pin SSOP footprint and provides the same core multichannel RS-232 function, making it a practical candidate for commercial and industrial-temperature designs. Do not select it when ambient temperatures can exceed +85 °C, fall below -40 °C, or when the MAX3243MDBREP's enhanced-product qualification is mandatory. Other MAX3243 ordering options may use different package, temperature, or production characteristics, so verify the pin description and electrical tables before treating any family member as interchangeable.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য MAX3243IDBR
Brand Texas Instruments Texas Instruments
Package 28-pin SSOP 28-pin SSOP
Product Type Multichannel RS-232 line driver and receiver Multichannel RS-232 line driver and receiver
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V
Maximum Data Rate 250 kbps 250 kbps
Line Drivers 3 3
Line Receivers 5 5
Operating Temperature Range -55 °C to +125 °C -40 °C to +85 °C
ESD Protection ±15 kV HBM ±15 kV HBM

মূল পার্থক্যসমূহ

  • Broader operating-temperature capability (বনামMAX3243IDBR)
  • Same compact channel integration (বনামMAX3243IDBR)
  • High-speed multichannel RS-232 operation (বনামMAX3243IDBR)

ডিজাইন নোট

Keep the charge-pump capacitor connections and receiver input traces short. Place the required capacitors close to their associated pins and use a continuous ground plane under and around the interface section. Route connector-side RS-232 traces away from clocks, switching converters, motor drive nodes, and other high-dV/dt circuitry to minimize common-mode and capacitive coupling.

Do not treat ±15 kV HBM ESD protection as a complete surge-protection solution. The HBM rating applies to the specified serial-port pins under the defined test conditions, while cable-borne transients can exceed that level. Use a suitable connector, chassis grounding, and coordinated external protection when the port is exposed to severe industrial or outdoor transients.

Decouple the single 3 V to 5.5 V supply near the device with the capacitance specified in the manufacturer datasheet. The charge pumps generate the positive and negative voltages used by the line drivers, so unstable supply voltage or inadequate local decoupling can disturb driver output levels. Check source impedance, capacitor voltage rating, and startup behavior across the complete temperature range.

Treat the RS-232 interface as a physically robust but electrically slow communication path. Verify the UART baud rate against the transceiver's 250 kbps maximum, account for cable capacitance and propagation delay, and avoid excessive edge rates on external interconnects. Receiver and driver ground references should connect according to the recommended interface layout in the MAX3243 datasheet.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The MAX3243 family documentation identifies TIA/EIA-232-F compliance and ±15 kV HBM ESD protection. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations for this ordering code require confirmation in the manufacturer product documentation.

ডেটা যাচাই করা হয়েছে: 2026-11-09 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

MAX3243MDBREP datasheet MAX3243MDBREP datasheet pdf MAX3243MDBREP pinout MAX3243MDBREP package MAX3243MDBREP equivalent MAX3243MDBREP replacement MAX3243MDBREP cross reference MAX3243MDBREP vs MAX3243IDBR MAX3243MDBREP price MAX3243MDBREP stock Texas Instruments MAX3243MDBREP MAX3243MDBREP RS-232 250kbps MAX3243MDBREP 28-SSOP interface

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments MAX3243 MAX3243MDBREP MAX3243IDBR RS-232 RS-232 transceiver line driver line receiver interface IC communications transceiver semiconductor TIA/EIA-232-F ESD protection HBM charge-pump circuit single-supply operation 28-pin SSOP SSOP package family surface-mount package 250 kbps 3 V to 5.5 V industrial control data acquisition asynchronous serial communication
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন