Texas Instruments

MAX3386ECDW - 3/2 RS-232 Transceiver, 250kbps | Texas Instruments

MPN: MAX3386ECDW ✗ জীবনকালের সমাপ্তি
3V to 5.5V Vdss 20-SOIC (0.295", 7.50mm width) Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MAX3386ECDW সারাংশ

The Texas Instruments MAX3386ECDW is a full-duplex RS-232 transceiver with three drivers and two receivers, a maximum data rate of 250kbps, and a 3V to 5.5V supply range in a 20-pin SOIC package. The device includes a split logic-side supply arrangement for mixed-signal systems.

An RS-232 transceiver is an interface IC that converts between single-ended logic-level signals and the bipolar voltage levels used by the RS-232 standard. It belongs to the communication transceiver family, which sits above line drivers and receivers in the interface hierarchy and ultimately supports serial data links in industrial, commercial, and embedded equipment.

Key electrical features include 500mV receiver hysteresis for improved noise immunity, 3V to 5.5V operation, and ±25kV ESD protection as identified for this device. The three-driver, two-receiver arrangement supports multiple outbound channels and two inbound channels within one package. Full-duplex operation allows simultaneous transmission and reception, while the split supply pins give the circuit designer independent control over the logic-side supply arrangement.

The MAX3386ECDW operates from 0°C to 70°C and is specified for surface-mount assembly in a 20-SOIC package measuring 0.295 inches, or 7.50mm, wide. Its 250kbps signaling rate is suitable for configuration ports, instrumentation, point-of-sale equipment, and legacy industrial control links. The integrated protection reduces the need for separate surge-protection components on exposed serial lines.

Typical applications include RS-232 ports for embedded controllers, test and measurement instruments, industrial diagnostic interfaces, and data acquisition systems. Because this part is obsolete, engineers should confirm availability, lifecycle status, and any manufacturer-approved migration path before releasing a new production design.

When laying out the board, keep the logic-side connections short and route the RS-232 lines away from clocks, switching regulators, and high-current power paths. Verify the external charge-pump capacitor values against the manufacturer datasheet and treat the RS-232 pins as external-facing signal nodes during EMC and ESD reviews.

This page consolidates device specifications, lifecycle information, pin-compatible alternatives, and design guidance for engineers evaluating the MAX3386ECDW against current RS-232 interface options.

এর জন্য ড্রপ-ইন বিকল্প MAX3386ECDW — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible MAX3386ECDW (একই form factor এবং footprint) — পার্থক্য রয়েছে Package.

Texas Instruments
Package: 20-SOIC (0.295 inch, 7.50 mm width)
এর সাথে তুলনা করুন MAX3386ECDW →

MAX3386EIDWR

✅ ড্রপ-ইন
📦 20-SOIC (0.295", 7.50mm width)
Industrial-temperature order code versus the 0°C to 70°C commercial grade; the upper temperature limit increases from 70°C to 85°C while the 250kbps data rate and 20-SOIC footprint remain unchanged

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MAX3386EIDWRG4

✅ ড্রপ-ইন
📦 20-SOIC (0.295", 7.50mm width)
Ordering suffix changes the orderable configuration while the 20-SOIC terminals, 3V operation, three-driver and two-receiver function, and 250kbps performance are unchanged

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MAX3386ECDWR

✅ ড্রপ-ইন
📦 20-SOIC (0.295", 7.50mm width)
Commercial-temperature ordering configuration versus the base MAX3386ECDW; electrical ratings remain at 3V to 5.5V and 250kbps with no pin or footprint change

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MAX3386EIDW

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Texas Instruments
📦 20-SOIC (0.295", 7.50mm width)
RS-232 transceiver · 3 drivers / 2 receivers · 3 · 2 · Split VL supply pin · ±25 kV · RIN inputs · DOUT outputs

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MAX3386ECDW বিশেষণ

Protocol RS-232
Transceiver Configuration 3 drivers / 2 receivers
Duplex Mode Full duplex
Maximum Data Rate 250kbps
Supply Voltage Range 3V to 5.5V
Receiver Hysteresis 500mV
ESD Protection ±25kV
Logic-Side Supply Split supply pins
অপারেটিং তাপমাত্রার পরিসর 0°C to 70°C
Temperature Grade Commercial
প্যাকেজ 20-SOIC (0.295", 7.50mm width)
Number of Terminals 20
Terminal Form Gull wing
Package Shape Rectangular
মাউন্টিং টাইপ Surface mount
Number of Drivers 3
Number of Receivers 2

MAX3386ECDW rectangular পিন কনফিগারেশন গাইড

MAX3386ECDW (rectangular প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

MAX3386ECDW-এর জন্য rectangular প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MAX3386ECDW.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

MAX3386ECDW এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Embedded Controller RS-232 Port, Industrial Diagnostic Interface, Test and Measurement Equipment, Data Acquisition System, Point-of-Sale Terminal Interface, Legacy Service and Configuration Port.

🔧

Embedded Controller RS-232 Port

The MAX3386ECDW fits a legacy serial port on an embedded controller because it operates from 3V to 5.5V and provides three drivers plus two receivers. A microcontroller can use one transmitter for command output and one receiver for response data, while the remaining channels support auxiliary links. Its 250kbps maximum rate is well above conventional RS-232 port rates, and 500mV receiver hysteresis improves tolerance to noise on external cables.

🏭

Industrial Diagnostic Interface

The MAX3386ECDW is suitable for industrial diagnostic links where service equipment connects to a controller through an RS-232 cable. The ±25kV-rated RS-232 pins help manage electrostatic discharge at the connector, while the three-driver and two-receiver arrangement allows multiple diagnostic channels in one device. The 0°C to 70°C commercial rating suits room-temperature equipment, but an industrial-temperature variant should be considered for uncontrolled environments.

📡

Test and Measurement Equipment

In test and measurement instruments, the MAX3386ECDW can convert a controller's logic-level commands into RS-232 signals for a remote operator or peripheral. Its full-duplex architecture permits simultaneous command transmission and status reception, and its 250kbps capability is suitable for control and configuration traffic rather than high-rate bulk transfers. The split logic-side supply arrangement supports mixed-voltage designs when carefully referenced to the instrument ground.

🖥️

Data Acquisition System

The MAX3386ECDW can interface legacy data-acquisition equipment through an RS-232 command and response port. Two receivers allow status or alarm information to be received while another channel drives a request, and the third driver can serve a second instrument bus. Its 500mV receiver hysteresis helps reject noise on bench-top and industrial cables, while the commercial 0°C to 70°C rating fits controlled laboratory environments.

🖨️

Point-of-Sale Terminal Interface

The MAX3386ECDW suits point-of-sale and peripheral equipment that retains an RS-232 printer, scanner, or service connector. Three drivers support several outbound ports while two receivers can monitor device responses without changing the transmitter state. Its 3V minimum supply supports embedded controller platforms, and the 250kbps rate comfortably covers legacy peripheral traffic. Cable routing and connector-side protection remain important because these ports often extend outside the enclosure.

🔌

Legacy Service and Configuration Port

The MAX3386ECDW is useful in equipment requiring a service-only RS-232 configuration port alongside newer digital interfaces. A service controller can drive configuration commands while a separate receiver channel reads status logs or acknowledgement signals. The integrated three-driver and two-receiver arrangement reduces the number of discrete interface packages needed, and the 20-SOIC footprint simplifies legacy board-level servicing and mechanical replacement.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

MAX3386EIDWR Pin-compatible industrial-temperature RS-232 transceiver ব্যবহৃত হয়: Embedded Controller RS-232 Port, Industrial Diagnostic Interface, Test and Measurement Equipment, Data Acquisition System, Point-of-Sale Terminal Interface, Legacy Service and Configuration Port MAX3386ECDWR Same-family commercial-temperature transceiver ব্যবহৃত হয়: Embedded Controller RS-232 Port, Test and Measurement Equipment, Point-of-Sale Terminal Interface, Legacy Service and Configuration Port MAX3386EIDWRG4 Same-family ordering configuration ব্যবহৃত হয়: Industrial Diagnostic Interface, Data Acquisition System
What is the MAX3386ECDW?
The MAX3386ECDW is a Texas Instruments full-duplex RS-232 transceiver containing three drivers and two receivers. It operates from a 3V to 5.5V supply, supports data rates up to 250kbps, and is packaged in a 20-pin SOIC. Its split logic-side supply architecture is intended for mixed-signal systems where the transceiver and surrounding logic may use different supply arrangements.
What are the key specifications of MAX3386ECDW that engineers should know?
The principal MAX3386ECDW specifications are a 3V to 5.5V supply range, 250kbps maximum data rate, 500mV receiver hysteresis, three drivers, two receivers, and ±25kV ESD protection. The device is a commercial-temperature part rated from 0°C to 70°C and comes in a surface-mount 20-SOIC package. These ratings define its suitability for conventional RS-232 ports rather than extended-temperature or high-speed serial links.
Is the MAX3386ECDW still active?
No, the MAX3386ECDW is listed as obsolete. Texas Instruments originally offered it as a 3V-to-5.5V, three-driver and two-receiver RS-232 transceiver in a 20-SOIC package. For a new design, evaluate a currently supported RS-232 interface and confirm the replacement pinout, supply arrangement, and ESD rating before committing the PCB layout.
What is the difference between MAX3386ECDW and MAX3386EIDWR?
The principal difference between MAX3386ECDW and MAX3386EIDWR is the device grade and order code. The ECDW part is specified for commercial operation from 0°C to 70°C, while the EIDWR variant provides an industrial-temperature option. Both use the same 20-SOIC footprint and the MAX3386E three-driver, two-receiver architecture with a 250kbps data rate. Verify each pin against the specific datasheet before substitution.
Can MAX3386EIDWR replace MAX3386ECDW on an existing PCB?
The MAX3386EIDWR is identified as a pin- and package-consistent replacement for the MAX3386ECDW, including matching 20-SOIC terminal and package arrangement. Its 3V supply operation and 250kbps interface rating remain the same, while the order code denotes an industrial-temperature option. Confirm the temperature grade, supply pins, charge-pump connections, and ESD requirements in the manufacturer documentation before production release.
What is the best drop-in replacement for MAX3386ECDW?
The MAX3386EIDWR is the closest documented drop-in option for the MAX3386ECDW because it retains the 20-SOIC package, terminal arrangement, 3V to 5.5V operation, and 250kbps RS-232 performance. The MAX3386EIDWRG4 and MAX3386ECDWR offer the same device family in different ordering configurations. Because the original part is obsolete, request written availability and lifecycle confirmation before placing a production order.
What can replace MAX3386ECDW?
The closest same-family replacements are MAX3386EIDWR, MAX3386EIDWRG4, and MAX3386ECDWR. They retain the 20-SOIC footprint and the three-driver, two-receiver RS-232 function at up to 250kbps. Selection should focus on temperature grade and order-code requirements rather than package conversion, because changing package families would require a PCB redesign.
Is the MAX3386ECDW suitable for a 3.3V system?
Yes, the MAX3386ECDW can operate from a 3V supply within its specified 3V to 5.5V range. This makes it suitable for 3.3V embedded systems that require an RS-232 port. The logic-side split supply arrangement provides additional implementation flexibility, but external bypass capacitors and the datasheet-recommended charge-pump capacitor network must still be applied.
What is the best Texas Instruments equivalent for MAX3386ECDW?
The MAX3386EIDWR is the closest Texas Instruments equivalent because it preserves the MAX3386E family architecture in the same 20-SOIC package with 3V operation, three drivers, two receivers, and a 250kbps data rate. MAX3386EIDWRG4 and MAX3386ECDWR are additional orderable configurations. Each option should be checked against the required operating-temperature grade and production status.
Where can I download the MAX3386ECDW datasheet PDF?
The MAX3386ECDW datasheet PDF is available through the Texas Instruments product documentation and the mirrored manufacturer-datasheet link listed on this page. The document describes the RS-232 transceiver, electrical characteristics, pin configuration, and application information for the 20-SOIC device. Use the manufacturer document as the controlling reference when checking charge-pump values, ESD ratings, and operating limits.
Where can I find the MAX3386ECDW pinout?
The MAX3386ECDW pinout is shown in the pin-description table of the manufacturer datasheet, which accompanies the 20-SOIC package information. Because the MAX3386ECDW uses split logic-side supply pins, assign PCB tracks directly from that table rather than relying on a generic RS-232 transceiver footprint. Confirm power, ground, driver, receiver, and charge-pump connections against the exact document revision for your order code.
Does the MAX3386ECDW need external charge-pump capacitors?
The MAX3386ECDW requires the external charge-pump capacitor network specified by the manufacturer for its internal RS-232 level-shifting function. Use the exact capacitor values and placement guidance in the datasheet because incorrect values can affect startup, line-driver performance, or reliability. Keep these components close to the associated device pins and route the connections away from sensitive analog inputs.
How much ESD protection does the MAX3386ECDW provide?
The MAX3386ECDW is identified with ±25kV ESD protection. This rating is valuable on RS-232 connector pins that may be exposed to electrostatic discharge through external cables. It does not replace a complete EMC design: still apply connector-side protection where required, maintain a defined ground strategy, and perform system-level immunity testing with the final cable and enclosure arrangement.
What is the MAX3386ECDW receiver hysteresis used for?
The 500mV receiver hysteresis provides noise immunity by requiring the receiver input to cross a defined voltage gap before changing state. This helps prevent data errors when slow or noisy transitions appear on the RS-232 line. Hysteresis is particularly useful on cables connected to external equipment, where ground offsets and electromagnetic coupling can perturb the receiver input.
Where can I buy MAX3386ECDW and what is its lead time?
Use the Request a Quote form on this page to ask for MAX3386ECDW pricing, stock status, minimum order quantity, and current lead time. The device is obsolete, so availability may depend on remaining inventory rather than regular production scheduling. Provide the required quantity, date code needs, and target delivery date in the quotation request to obtain a usable supply commitment.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MAX3386ECDW — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the MAX3386ECDW only when maintaining an existing commercial-temperature RS-232 design and the exact original order code is essential, because the device is obsolete. For an existing 20-SOIC board that requires a documented pin-compatible replacement, MAX3386EIDWR is the preferred candidate when industrial-temperature coverage and an ordering code compatible with the original family are acceptable. MAX3386ECDWR is appropriate when commercial-temperature operation and the alternate ordering configuration satisfy the design. Do not select any of these options solely by package size: verify the driver and receiver pin assignments, split-supply connections, charge-pump capacitors, and ESD expectations against the exact manufacturer document. For new designs with wider environmental requirements, more channels, or a different logic supply, evaluate a currently supported RS-232 transceiver rather than carrying forward an obsolete part lifecycle risk.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য MAX3386EIDWR MAX3386EIDWRG4 MAX3386ECDWR
Package 20-SOIC (0.295", 7.50mm width) 20-SOIC - same 20-SOIC - same 20-SOIC - same
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Transceiver Configuration 3 drivers / 2 receivers 3 drivers / 2 receivers 3 drivers / 2 receivers 3 drivers / 2 receivers
Maximum Data Rate 250kbps 250kbps 250kbps 250kbps
Supply Voltage Range 3V to 5.5V 3V 3V 3V
Operating Temperature Range 0°C to 70°C Industrial-grade option Industrial-grade option 0°C to 70°C
Duplex Mode Full duplex Full duplex Full duplex Full duplex

মূল পার্থক্যসমূহ

  • Three transmitters and two receivers in one RS-232 package (বনামMAX3386EIDWR)
  • Split logic-side supply for mixed-signal flexibility (বনামMAX3386ECDWR)
  • Higher operating-temperature option within the same footprint (বনামMAX3386ECDW)

ডিজাইন নোট

Keep logic-side traces short and separate the RS-232 driver outputs from sensitive receiver inputs. Place the manufacturer-specified charge-pump capacitors close to their associated pins with short, low-loop-area connections. Because the device includes split logic-side supply pins, define each rail at the IC and verify return-current paths so switching currents do not modulate the receiver reference.

Do not substitute a generic 20-pin SOIC transceiver solely by pin count. Confirm driver and receiver assignments, charge-pump connections, split-supply pins, and the exposed versus non-exposed package variant. The MAX3386EIDWR is documented as pin- and package-consistent with the target, while the MAX3386ECDWR and MAX3386EIDWRG4 are alternate ordering configurations of the same device family.

Treat every RS-232 connector pin as an external-facing port. Route cable-side traces away from clocks, power converters, and high-current loops, and consider connector-side surge or ESD protection when the cable can leave the enclosure. The internal ±25kV device protection rating does not replace enclosure-level EMC design or system immunity testing.

Decouple each supply pin according to the manufacturer layout guidance, with a short high-frequency bypass path to the intended ground reference. Check the 3V to 5.5V operating range against the logic-side system voltage, and avoid excessive loading on the split supply arrangement when the transceiver and controller do not share the same rail.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The device is listed as obsolete. The MAX3386EIDWRG4 ordering configuration may indicate a compliant finish, but RoHS, REACH, halogen-free, and conflict-minerals status were not explicitly established for the target part.

ডেটা যাচাই করা হয়েছে: 2026-11-09 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

MAX3386ECDW datasheet MAX3386ECDW pinout MAX3386ECDW datasheet pdf MAX3386ECDW equivalent MAX3386ECDW replacement MAX3386ECDW cross reference MAX3386ECDW vs MAX3386EIDWR MAX3386ECDW price MAX3386ECDW stock Texas Instruments MAX3386ECDW MAX3386ECDW 20-SOIC pinout MAX3386ECDW RS-232 transceiver MAX3386ECDW application circuit what is the MAX3386ECDW

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments MAX3386ECDW MAX3386EIDWR MAX3386EIDWRG4 MAX3386ECDWR MAX3386EIDW RS-232 RS-232 transceiver line driver line receiver communication interface IC full duplex split supply 250kbps 500mV receiver hysteresis 3V to 5.5V supply ±25kV ESD protection 20-SOIC SOIC package family surface mount charge-pump capacitor industrial control test and measurement RS-232 interface
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন