Analog Devices

MAX394EPP+ - 4-Channel SPDT 35Ω Switch | Analog Devices

MPN: MAX394EPP+ ✓ সক্রিয়
±2.7V to ±8V Vdss 35Ω maximum Rds(on) 20-pin PDIP Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MAX394EPP+ সারাংশ

The Analog Devices MAX394EPP+ is a low-voltage, quad, SPDT CMOS analog switch with four independent channels, 35Ω on resistance, and a 20-pin PDIP package. It accepts bipolar supplies from ±2.7V to ±8V or a single supply from +2.7V to +15V, making it suitable for routing low-voltage analog and digital signals where multiple signal paths must be selected.

A CMOS analog switch is an electrically controlled pass-device multiplexer that connects one signal terminal to one of two alternatives. The SPDT configuration provides a common terminal and two switched terminals per channel. As part of the semiconductor hierarchy, the MAX394 belongs to the integrated-circuit, interface-IC, analog-switch, and multiplexer families used to route signals between sensors, converters, amplifiers, test equipment, and system controllers.

The MAX394 uses a low-voltage silicon-gate process and is designed to provide low power consumption of 10μW and extremely low charge injection of 10pC. Its ESD protection exceeds 2000V. The four on-resistance channels are matched closely, helping minimize gain and timing variation when the same switch network handles several related signals. The MAX394EPP+ also replaces the MAX333A according to the manufacturer product page.

Dual-supply operation allows the switch to pass signals around ground without requiring a mid-supply reference, while single-supply operation supports systems with a +2.7V to +15V rail. The device provides four independent switching sections rather than a multiplexed shared path, allowing each channel to select its own source. Control inputs determine which terminal is connected to the corresponding common terminal, with actual transition behavior, logic levels, and timing defined by the manufacturer datasheet.

Typical uses include precision test-and-measurement systems, data-acquisition front ends, battery-powered instrumentation, industrial control interfaces, and low-voltage communication equipment. The 20-pin PDIP format also makes the device practical for prototypes, legacy industrial equipment, and hand-assembled test boards where a surface-mount package would complicate inspection or rework.

For reliable operation, confirm the control-logic levels against the supply configuration and observe the absolute maximum ratings before applying signals. Keep connected external circuitry within the specified common-mode range, route high-impedance nodes conservatively, and account for charge injection when changing channel state. The DIP package should also be protected from conductive contamination and cleaned with an appropriate solvent during maintenance.

This page consolidates the manufacturer switch specifications, lifecycle status, package details, engineering guidance, and documented comparison points into a design-oriented reference. It also distinguishes the PDIP MAX394EPP+ from surface-mount MAX394 variants, helping engineers confirm footprint and ordering requirements before beginning a PCB or replacement design.

এর জন্য ড্রপ-ইন বিকল্প MAX394EPP+ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

MAX394CPP+

✅ ড্রপ-ইন
📦 20-pin PDIP
Same MAX394 quad SPDT function and 20-pin PDIP footprint; ordering suffix differs by 0% in channel count, package, and stated 35Ω on resistance.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MAX333AEPP+

✅ ড্রপ-ইন
📦 20-pin PDIP
Same four-channel SPDT and 20-pin PDIP format; MAX333A is the predecessor family that MAX394 replaces, with legacy control and switching details requiring verification.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MAX394EPP+ সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type Quad SPDT CMOS analog switch
Number of Channels 4 independent channels
Switch Configuration 4 × SPDT
On Resistance 35Ω maximum
Bipolar Supply Range ±2.7V to ±8V
Single Supply Range +2.7V to +15V
Charge Injection 10pC
Power Consumption 10μW
ESD Protection Greater than 2000V
On-Resistance Matching Between Channels Within 2Ω
Process Technology Low-voltage silicon-gate CMOS
প্যাকেজ 20-pin PDIP
Package Pitch 7.62mm
মাউন্টিং টাইপ Through-hole

MAX394EPP+ 7.62mm পিন কনফিগারেশন গাইড

MAX394EPP+ (7.62mm প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

MAX394EPP+-এর জন্য 7.62mm প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MAX394EPP+.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

MAX394EPP+ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Precision Test and Measurement Systems, Data Acquisition Front Ends, Battery-Powered Instrumentation, Industrial Control Signal Routing, Communication Signal Multiplexing, Legacy Interface Card Replacement.

🖥️

Precision Test and Measurement Systems

The MAX394EPP+ is well suited to switching low-level analog signals among test instruments, fixtures, amplifiers, and external reference sources. Four independent SPDT channels provide separate routing paths rather than forcing signals through one shared multiplexer, while the 35Ω on resistance helps limit signal attenuation. The 10pC charge injection is also beneficial when the selected path feeds a high-impedance detector, because it reduces the control-transition disturbance injected into that node. Designers should still evaluate the complete signal path for bandwidth, capacitance, leakage, and source-impedance effects.

🧩

Data Acquisition Front Ends

The MAX394EPP+ can route sensor or conditioning outputs into a data-acquisition front end by assigning one SPDT channel to each relevant source. Its four independent sections allow multiple signals to be selected without sharing a common multiplexer node, which helps preserve channel consistency and simplify board-level signal organization. The low-voltage operating range supports circuits working near +2.7V through +15V, while 10μW power consumption is beneficial in compact battery-operated systems. The design should account for the switch's off resistance, leakage, capacitance, and input common-mode limits at the intended operating frequency.

🔋

Battery-Powered Instrumentation

The MAX394EPP+ fits battery-powered analytical and portable instrumentation because its stated power consumption is only 10μW. The device can operate from a single +2.7V to +15V supply or from bipolar rails, allowing it to support both compact single-rail systems and designs that switch signals centered around ground. Its low 10pC charge injection is advantageous when switching into sensitive measurement nodes. To obtain the intended battery-life benefit, engineers should also account for the leakage and off-state resistance of the complete signal path and confirm that the control-driving circuit consumes no more standby power than required.

🏭

Industrial Control Signal Routing

The MAX394EPP+ can route low-voltage control and feedback signals in industrial equipment where four separately selectable paths are needed. Its independent SPDT channels simplify connection of sensor outputs, actuator commands, diagnostic lines, or local test points, while the 35Ω on resistance is suitable for many low-frequency control signals. The through-hole PDIP package also remains convenient for repairable industrial assemblies and manually assembled control boards. Production suitability depends on the exact operating-temperature grade, so designers must verify the ordering table and absolute maximum ratings for the intended enclosure temperature.

🌐

Communication Signal Multiplexing

The MAX394EPP+ can select low-voltage communication paths when the design requires four independent SPDT routing decisions. Dual-supply operation from ±2.7V to ±8V is useful for systems that route signals around ground, and the low 35Ω on resistance limits insertion loss in impedance-sensitive paths. The device's low charge injection can help preserve signal integrity during state changes, although actual edge quality also depends on control timing, trace capacitance, and the impedance of the connected network. Engineers should verify bandwidth, off isolation, and channel capacitance before using the switch for high-speed links.

🔧

Legacy Interface Card Replacement

The MAX394EPP+ is useful when repairing or upgrading a legacy interface card built around the MAX333A family. The manufacturer identifies MAX394 as the replacement for MAX333A, and both MAX394EPP+ and MAX333AEPP+ use a 20-pin PDIP format, which can simplify mechanical replacement when the pin functions and electrical limits match. A responsible replacement review must compare control-input thresholds, switching timing, charge injection, on resistance, leakage, and absolute maximum ratings. The through-hole package also permits socketed implementation when field replacement and technology refresh are important.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

MAX394CPP+ Same quad SPDT switch family in a 20-pin PDIP package ব্যবহৃত হয়: Precision Test and Measurement Systems, Data Acquisition Front Ends, Battery-Powered Instrumentation, Industrial Control Signal Routing, Communication Signal Multiplexing, Legacy Interface Card Replacement MAX333AEPP+ Legacy quad SPDT comparison device in a 20-pin PDIP package ব্যবহৃত হয়: Precision Test and Measurement Systems, Data Acquisition Front Ends, Battery-Powered Instrumentation, Industrial Control Signal Routing, Communication Signal Multiplexing, Legacy Interface Card Replacement
What is the MAX394EPP+?
The MAX394EPP+ is a low-voltage, quad, SPDT CMOS analog switch with four independent channels in a 20-pin PDIP package. According to the Analog Devices MAX394 datasheet, it provides 35Ω on resistance, accepts bipolar supplies from ±2.7V to ±8V or a single supply from +2.7V to +15V, and uses low-voltage silicon-gate CMOS technology.
What are the key specifications of MAX394EPP+ that engineers should know?
The MAX394EPP+ combines four independent SPDT channels, 35Ω maximum on resistance, 10pC charge injection, 10μW power consumption, and ESD protection greater than 2000V. According to the Analog Devices MAX394 datasheet, the device also matches on resistance between channels within 2Ω and supports both bipolar and single-supply operation.
Where can I download the MAX394EPP+ datasheet PDF?
The MAX394EPP+ datasheet PDF is available from the official Analog Devices MAX394 data-sheet URL listed on this page. The document is titled MAX394, Low-Voltage, Quad, SPDT, CMOS Analog Switch and includes the product family overview. Use its pin-description table and electrical-characteristics tables when assigning PCB connections and validating operating limits.
Where can I find the MAX394EPP+ pinout?
The MAX394EPP+ pinout is shown in the manufacturer MAX394 datasheet. The EPP+ ordering code identifies the 20-pin PDIP package with a 7.62mm pitch, while the manufacturer family page distinguishes it from the SOIC-20 variants. Check the package drawings and pin-description table before assigning control inputs or common and switched terminals.
Can MAX394EPP+ operate from a single supply?
Yes, the MAX394EPP+ can operate from a single supply ranging from +2.7V to +15V. According to the MAX394 datasheet, it can alternatively use bipolar supplies from ±2.7V to ±8V. Single-supply operation is useful in compact systems, while dual-supply operation permits bipolar signal routing around ground.
What is the charge injection of MAX394EPP+?
The MAX394EPP+ has an extremely low charge injection of 10pC. According to the Analog Devices MAX394 datasheet, this characteristic limits the unwanted signal step transferred into a high-impedance node when a control input changes state. The actual circuit offset also depends on source impedance, load capacitance, control timing, and the specific channel configuration.
What can replace MAX394EPP+?
MAX394CPP+ is a documented PDIP alternative with the same MAX394 family, four-channel SPDT function, and 20-pin through-hole format. MAX333AEPP+ is another documented comparison part in a 20-pin PDIP format and is the predecessor family that the manufacturer states MAX394 replaces. Confirm control levels, supply limits, timing, and lifecycle requirements before approving either substitution.
What is the best drop-in replacement for MAX394EPP+?
MAX394CPP+ is the closest documented drop-in candidate because it retains the MAX394 family, quad SPDT configuration, 20-pin PDIP package, and 7.62mm package pitch. The available cross-reference information does not establish five pin-compatible modern alternatives, so broader substitutions should not be assumed. Verify absolute maximum ratings and control-input logic against the manufacturer datasheet.
MAX394EPP+ vs MAX394CPP+ - which is better?
MAX394CPP+ is the better choice when an equivalent MAX394 quad SPDT switch in the same 20-pin PDIP format is required. The manufacturer comparison identifies both as MAX394-family devices with four SPDT channels, while the package suffix distinguishes the ordering variants. Use the ordering table to confirm the intended temperature and packaging option before release.
MAX394EPP+ vs MAX333AEPP+ - which is better for a legacy board?
The MAX394EPP+ is generally preferable for a new or replacement design because the manufacturer identifies MAX394 as the replacement for MAX333A while retaining the low-voltage quad SPDT role. MAX333AEPP+ may suit an existing legacy board, but engineers must verify pin functions, supply limits, control thresholds, and switching timing rather than assuming interchangeability.
When should I choose MAX394EPP+ over MAX333AEPP+?
Choose MAX394EPP+ when maintaining a 20-pin PDIP footprint and the low-voltage quad SPDT function while prioritizing the newer MAX394 family. The manufacturer specifically states that MAX394 replaces MAX333A. For an unchanged installed board, compare both pin descriptions and electrical limits to ensure the modern part preserves every required control and signal condition.
Is MAX394EPP+ suitable for low-voltage test and measurement systems?
The MAX394EPP+ is suitable for low-voltage test and measurement systems that require four independent SPDT paths. Its 35Ω on resistance, 10pC charge injection, and 10μW power consumption support signal-routing applications where low disturbance and low power are important. Bandwidth, leakage, capacitance, and common-mode limits must also be checked for the intended signal frequency.
Where can I buy MAX394EPP+ and what is its lead time?
Use the Request a Quote form on this page to request MAX394EPP+ availability, current lead time, and order details. The manufacturer lists the MAX394 family as production, but a confirmed quantity, package allocation, and delivery schedule should be obtained before committing the component to a build schedule.
What is the price of MAX394EPP+?
Use the Request a Quote form on this page for the current MAX394EPP+ price, quantity breaks, and delivery information. The structured pricing area should be treated as the primary commercial reference because market pricing and supply can change. No fixed price should be embedded in a design specification or purchasing forecast.
Is MAX394EPP+ in stock?
The current MAX394EPP+ stock status should be confirmed through the Request a Quote form on this page. The manufacturer identifies MAX394 as a production family, but production status alone does not guarantee inventory for every package and quantity. Supply confirmation is particularly important for through-hole PDIP assemblies that may be constrained in active production.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MAX394EPP+ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the MAX394EPP+ for new low-voltage analog-routing designs that require four independent SPDT channels, a 20-pin PDIP footprint, and a current MAX394-family production source. Its specified 35Ω on resistance, 10pC charge injection, 10μW power consumption, and ESD protection above 2000V make it appropriate for precision measurement, data acquisition, and battery-powered instrumentation. Select MAX394CPP+ when it is the specified ordering configuration for the same PDIP-based MAX394 family. Consider MAX333AEPP+ mainly for legacy-system continuity or comparison with the predecessor family. Before approving either alternative, verify control thresholds, timing, common-mode limits, and absolute maximum ratings rather than relying on package similarity alone.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য MAX394CPP+ MAX333AEPP+
Package 20-pin PDIP 20-pin PDIP - same footprint 20-pin PDIP - same footprint
Brand Analog Devices Analog Devices Analog Devices
Product Type Low-voltage quad SPDT CMOS analog switch Low-voltage quad SPDT CMOS analog switch Quad SPDT CMOS analog switch
Number of Channels 4 independent channels 4 independent channels 4 channels

মূল পার্থক্যসমূহ

  • Modern MAX394 family replaces the MAX333A (বনামMAX333AEPP+)
  • Documented low charge injection (বনামMAX333AEPP+)
  • Four independent SPDT channels (বনামMAX394CPP+)
  • Low power consumption (বনামMAX333AEPP+)

ডিজাইন নোট

Treat the 35Ω on resistance as part of the complete source-to-load network. For a high-impedance source, the switch resistance adds little attenuation, but for a low-impedance source it can create a divider with downstream resistance. Check off resistance and leakage as well because they determine how accurately a de-selected branch is isolated. Where charge injection matters, include the 10pC device characteristic together with source impedance, load capacitance, and control-edge timing in the settling analysis.

Choose the supply configuration according to the signal range: use +2.7V to +15V for a single-rail system or ±2.7V to ±8V for bipolar routing. Keep control-input levels compatible with the selected configuration and observe the absolute maximum ratings in the manufacturer datasheet. Although the device states 10μW power consumption, total system demand also includes control-driver overhead and leakage through connected analog paths, which can dominate power in a high-impedance battery-powered design.

The 20-pin PDIP package has a 7.62mm pitch and is intended for through-hole assembly. Preserve the manufacturer pin numbering when laying out the board, especially when replacing MAX333AEPP+ with MAX394EPP+. Route each common and switched terminal directly to its intended circuit, avoid long stubs where signal integrity matters, and provide adequate clearance around the through-hole pads. A socket can simplify service replacement if the mechanical layout, pin length, and insertion clearance are validated.

Do not infer drop-in compatibility from the package outline alone. Before substituting MAX394CPP+ or MAX333AEPP+, compare control-input thresholds, switch timing, on and off resistance, charge injection, leakage, common-mode range, and absolute maximum ratings. The MAX394 family is described as replacing MAX333A, but a production release should still document the comparison so that legacy control logic and signal-level constraints remain satisfied.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The MAX394 family is an analog interface IC rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, and halogen-free declarations were not identified for this exact ordering code.

ডেটা যাচাই করা হয়েছে: 2026-11-19 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

MAX394EPP+ datasheet MAX394EPP+ pinout MAX394EPP+ datasheet pdf MAX394EPP+ equivalent MAX394EPP+ replacement MAX394EPP+ cross reference MAX394EPP+ vs MAX394CPP+ MAX394EPP+ vs MAX333AEPP+ MAX394EPP+ 20-pin PDIP MAX394EPP+ price MAX394EPP+ stock Analog Devices MAX394EPP+ MAX394 quad SPDT analog switch MAX394 low voltage analog switch MAX394EPP+ application circuit

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Analog Devices MAX394EPP+ MAX394CPP+ MAX333AEPP+ MAX394 MAX333A quad SPDT analog switch CMOS analog switch analog multiplexer interface IC semiconductor low-voltage silicon-gate process on resistance charge injection power consumption ESD protection single-supply operation bipolar supply operation 20-pin PDIP through-hole package test and measurement data acquisition industrial control battery-powered instrumentation signal multiplexing
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন