onsemi

MC14029BF - 4-Bit Binary/Decade Up-Down Counter | onsemi

MPN: MC14029BF ✓ সক্রিয়
16-pin SOIC Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MC14029BF সারাংশ

The onsemi MC14029BF is a 4-bit binary/decade up-down counter built with complementary MOS P-channel and N-channel enhancement-mode devices in a 16-pin SOIC package. It supports positive-edge-triggered counting, operates in binary or BCD mode, and provides separate carry and borrow outputs for multi-digit arithmetic and digital sequencing. The MC14029BF is the F-package ordering code associated with the MC14029B counter family and is identified by onsemi as the MC14029B Binary/Decade Up/Down Counter.

A binary/decade up-down counter is a synchronous logic circuit that increments or decrements a four-bit numerical state when clocked. Binary mode represents values from 0 through 15, while decade mode supports decimal counting from 0 through 9. In the broader electronics hierarchy, the MC14029BF is a counter IC, which belongs to the logic IC and digital semiconductor categories. Its architecture combines D-type flip-flop stages with gating that permits counting in either direction, making it useful for modular arithmetic, stepper-motor position tracking, frequency division, and programmable event sequencing.

The principal feature of the MC14029BF is its bidirectional counting capability. A separate up/down control determines the counting direction, while the clock input advances the selected state on the active edge. The four parallel outputs Q0 through Q3 expose the current count for direct observation, decoding, display, or control. A cascade input allows multiple counters to form larger counting systems, and the carry and borrow outputs identify overflow or underflow conditions. A parallel load input supports initialization to a predefined count, while master reset provides a common clearing mechanism.

Because the device is implemented in complementary MOS technology, it combines low-power operation with the voltage-level behavior expected from the MC14029B logic family. The counter can be used either as a binary counter or as a decade counter, allowing the same physical circuit to serve digital clocks, industrial sequence counters, and modular arithmetic functions. Because a cascade connection introduces propagation delay between stages, designers should account for settling time when interpreting overflow signals or when several stages must transition coherently.

Typical uses include digital frequency dividers, programmable event counters, bidirectional position indicators, decade timing chains, and four-bit arithmetic sequences. In a cascaded display or timing system, one MC14029BF can count units while additional devices count tens and higher groups. The carry output can advance the next stage during an up-count, while the borrow output can decrement it during a down-count. A parallel-load path can also initialize the counter to a nonzero value, which is useful in presettable timers and sequence generators.

PCB implementation should preserve the pin assignments of the 16-pin SOIC footprint and route clock and control signals away from sensitive analog or high-speed nets. The clock input is especially important in a counter because excessive clock-edge noise can cause false increments or decrements. Keep traces short, provide a low-impedance ground reference, and avoid placing slow control inputs immediately beside the clock net when the layout permits. Follow the manufacturer’s application information for recommended decoupling and unused-input treatment.

This product page combines the manufacturer’s function description with package, pinout, sourcing, and engineering guidance. It also distinguishes the MC14029BF from related ordering codes while emphasizing that final replacement decisions require checking the complete truth table, timing limits, voltage limits, and operating-temperature requirements for the specific design.

এর জন্য ড্রপ-ইন বিকল্প MC14029BF — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

MC14029BD

✅ ড্রপ-ইন
onsemi
📦 SOIC-16
Binary/Decade Up/Down Counter · 1 element · 4 bits · Binary or BCD · CMOS · MOS P-channel and N-channel enhancement-mode devices · Type-D flip-flop stages · Separate count-up and count-down inputs

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MC14029BCPG

✅ ড্রপ-ইন
📦 SOIC-16
Related MC14029B ordering code shown in comparison results; package suffix and qualification differences must be checked before substitution.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MC14029BFELG

✅ ড্রপ-ইন
📦 SOIC-16
Same MC14029BF family and 16-pin EIAJ SOIC function, with ordering-code, temperature, or qualification details requiring verification.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MC14029BF সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Counter Type Binary/Decade Up/Down Counter
Number of Bits 4 bit
Counting Direction Up or Down
Triggering Positive edge
Counter Elements 1 element
Logic Technology Complementary MOS (P-channel and N-channel enhancement-mode devices)
Counting Modes Binary or BCD
প্যাকেজ 16-pin SOIC
পিন সংখ্যা 16 pins
মাউন্টিং টাইপ Surface mount

MC14029BF পিন কনফিগারেশন

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
পিন 1 CLK — Clock input
পিন 2 UP/DOWN — Counting-direction control input
পিন 3 Q0 — Least-significant counter output
পিন 4 Q1 — Counter output
পিন 5 Q2 — Counter output
পিন 6 Q3 — Most-significant counter output
পিন 7 LOAD — Parallel load control input
পিন 8 CARRY — Carry output
পিন 9 MR — Master reset input
পিন 10 C0 — Parallel data input C0
পিন 11 C1 — Parallel data input C1
পিন 12 C2 — Parallel data input C2
পিন 13 C3 — Parallel data input C3
পিন 14 VDD — Positive power supply
পিন 15 VSS — Ground reference
পিন 16 PL — Parallel load input

সাধারণ ব্যবহার

MC14029BF এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Bidirectional Position Counter, Digital Frequency Divider, Decimal Display Timing, Programmable Event Sequencer, Stepper-Motor Step Counting, Modular Arithmetic Unit.

🔧

Bidirectional Position Counter

The MC14029BF is suitable for a four-bit bidirectional position counter because it counts upward or downward according to the UP/DOWN control and exposes four parallel count outputs, Q0 through Q3. A position sensor or switch event can drive the clock after debouncing, while the counter state records movement in either direction. The carry and borrow outputs identify transitions beyond the counter’s programmed range, which can support rollover or travel-limit handling. Because the device is only four bits wide, larger travel values require cascading additional stages. Designers should also account for switch bounce and asynchronous input timing so that one physical movement produces exactly one valid count event.

🖥️

Digital Frequency Divider

The MC14029BF can divide an incoming clock into lower-frequency count events by advancing a 4-bit state on each active edge. The four Q outputs provide binary division values, allowing a downstream system to select a factor of 2, 4, 8, or 16 through decoding logic. This arrangement is useful for low-rate timing, sampling strobes, and sequencing tasks in digital control equipment. The cascade input permits larger division ratios when one stage is insufficient. Timing margin must be checked across the cascade path, especially if the next stage is expected to change immediately after the carry signal becomes valid.

📺

Decimal Display Timing

In decade mode, the MC14029BF can form one decimal digit of a counting display or timer because its ten-state sequence represents 0 through 9. The four output bits drive the corresponding display-decoder logic, while the carry output indicates that the next decimal position must advance. Cascading counters permits groups of three or more decimal digits, with each stage receiving the carry from the lower-order device. Parallel load provides a convenient way to preset an initial value, and master reset establishes a known zero state. Layout should keep display drivers and counter outputs logically separated to reduce simultaneous switching noise in the display circuitry.

🏭

Programmable Event Sequencer

The MC14029BF can serve as the state-counting element in a programmable event sequencer because it combines a four-bit count with up, down, load, and reset controls. The Q outputs can be decoded into discrete steps for machinery, test equipment, or industrial controls, while parallel load allows a sequence to restart from a chosen point. The carry output can trigger an adjacent event when a step boundary is reached. For reliable operation, decoded outputs should be registered or filtered if they drive slow mechanical loads, and the clock source should remain free of ringing or switch-contact bounce.

⚡

Stepper-Motor Step Counting

The MC14029BF can count commanded stepper-motor steps when the UP/DOWN input reflects the commanded travel direction. This creates a compact digital position record with four bits of resolution, corresponding to 16 states before wraparound or cascade is required. A directional control and the four parallel outputs can be decoded by a motion controller or supervisory logic. The clock should be generated only after each accepted step, and input filtering must prevent multiple counts from one electrical transition. For motors requiring more than 16 positions, cascade additional counters and use the carry or borrow output to extend the effective counting range.

🧩

Modular Arithmetic Unit

The MC14029BF supports modular arithmetic because its four-bit counter can operate in binary or decade mode and can be loaded with a preset value. The UP/DOWN control permits subtraction or addition of count events, while parallel outputs make the current residue available to a controller. This function is useful in modular timing, cyclic scheduling, and compact arithmetic-state machines. Carry and borrow outputs indicate whether the operation crossed the active count boundary. The application should define how these outputs are sampled, since they are synchronous state signals and their interpretation must follow the manufacturer’s truth table and propagation-delay limits.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

MC14029BD onsemi ব্যবহৃত হয়: Bidirectional Position Counter, Digital Frequency Divider, Decimal Display Timing, Programmable Event Sequencer, Stepper-Motor Step Counting MC14029BFELG Related 16-pin counter ordering code ব্যবহৃত হয়: Bidirectional Position Counter, Decimal Display Timing, Stepper-Motor Step Counting, Modular Arithmetic Unit MC14029BCPG Related counter family member ব্যবহৃত হয়: Digital Frequency Divider, Programmable Event Sequencer, Modular Arithmetic Unit
What is the onsemi MC14029BF?
The onsemi MC14029BF is a 4-bit complementary-CMOS binary/decade up-down counter in a 16-pin SOIC package. According to the onsemi MC14029B datasheet, the counter uses P-channel and N-channel enhancement-mode devices and can count upward or downward on the active clock edge. It operates in binary or BCD mode and exposes count, carry, borrow, load, cascade, and reset functions for digital arithmetic and sequencing.
What is the operating voltage of the MC14029BF?
The MC14029BF operating-voltage range is not stated in the manufacturer information shown for this product, so consult the onsemi MC14029B datasheet before applying a supply voltage. The device is a CMOS logic IC, but its usable voltage limits must be checked against the exact process grade and ordering code. Confirm absolute maximum ratings, recommended supply voltage, input thresholds, and output-current limits in the manufacturer’s electrical-characteristics table.
How many bits can the MC14029BF count?
The MC14029BF is a 4-bit counter with four parallel state outputs identified as Q0 through Q3. According to the onsemi MC14029B datasheet, the device can operate as a binary counter or a decade counter. Binary operation provides a four-bit state, while decade operation restricts the counting sequence to ten states for decimal counting. Its parallel-load and carry or borrow paths support preset and cascaded-counter designs.
What is the MC14029BF pinout?
The MC14029BF uses a 16-pin SOIC pinout with CLK on pin 1, UP/DOWN on pin 2, Q0 through Q3 on pins 3 through 6, LOAD on pin 7, CARRY on pin 8, MR on pin 9, C0 through C3 on pins 10 through 13, VDD on pin 14, VSS on pin 15, and PL on pin 16. Confirm signal polarity, reset behavior, and unused-input requirements against the onsemi pin-description table before layout.
Can the MC14029BF operate as a decade counter?
Yes, the MC14029BF can operate as either a binary or a decade counter. The onsemi MC14029B datasheet identifies binary/decade operation as a principal feature of the counter family. Decade mode is useful when a 0-to-9 sequence is required, such as in a decimal display or timer chain. The mode-control logic and counter truth table in the datasheet determine the required input state.
Where can I download the MC14029BF datasheet PDF?
The official MC14029B datasheet is available from onsemi at https://www.onsemi.com/pdf/datasheet/mc14029b-d.pdf. The document contains the binary/decade counter description, operating logic, pin descriptions, electrical characteristics, and ordering information applicable to MC14029B package variants. Use the ordering-information section to map MC14029BF to its package and manufacturing options before releasing a PCB or production BOM.
Where can I buy MC14029BF and request a quotation?
Use the Request a Quote form on this page to request MC14029BF pricing, stock confirmation, lead time, and order quantities. The MC14029BF is listed in stock by a component marketplace, but the current commercial terms can change without notice. For production planning, request the exact MPN, quantity, date code, target packaging, and any required traceability documentation with your quotation request.
What is the current price and lead time for MC14029BF?
Current price and lead time for MC14029BF should be obtained through the Request a Quote form on this page. The page’s structured pricing information reflects the most recent captured unit-price reference, but it does not establish guaranteed inventory, delivery, or volume-break terms. Include your required quantity, target date, and permitted package or date-code conditions so the quotation can be matched to the actual production requirement.
Is MC14029BF in stock?
MC14029BF is identified as in stock by a component marketplace listing, but stock quantity is not guaranteed by that statement. Use the Request a Quote form on this page for a current confirmation tied to the quantity and date code you need. For safety-critical or production builds, request batch traceability, packaging details, and a committed delivery schedule rather than relying on an unqualified general availability statement.
What can replace the MC14029BF?
A direct replacement must use the same 16-pin SOIC footprint and preserve the clock, up/down, carry, borrow, load, reset, cascade, and power pin functions. MC14029BD is a closely related onsemi ordering code shown in cross-reference results, but package, temperature, qualification, and ordering details must be checked before substitution. The onsemi MC14029B datasheet remains the controlling document for electrical and timing compatibility.
MC14029BF vs MC14029BD: which is better?
MC14029BF and MC14029BD are closely related onsemi MC14029B ordering codes, and both are associated with 16-pin counter variants, but the suffix can encode a different package or manufacturing option. Choose MC14029BF when its ordering information matches the required SOIC footprint and qualification class. Review the onsemi ordering table for MC14029BD before treating it as a board-level drop-in replacement.
When should I choose MC14029BF instead of another 4-bit counter?
Choose MC14029BF when the design needs a 4-bit counter that can count in either direction and can be switched between binary and BCD operation. It is also appropriate when four parallel outputs, parallel preset, cascade, carry, and borrow functions are required in a 16-pin SOIC design. Select another counter when a different counting width, electrical interface, package, or timing profile better matches the system.
Is MC14029BF suitable for a bidirectional stepper-motor position counter?
Yes, MC14029BF can represent a four-bit bidirectional count used in position-step tracking, provided the mechanical resolution and wraparound behavior match the application. The up/down input determines the counting direction, and the carry or borrow output identifies the counter boundary. The design must also ensure that switch bounce is filtered and that the clock source cannot advance the count more than once per physical position event.
What is the best onsemi equivalent for MC14029BF?
The best onsemi equivalent is the ordering code that preserves the required SOIC footprint, counter function, electrical limits, and qualification class of MC14029BF. MC14029BD is the closest related code named in the cross-reference results, while MC14029BFELG is another related onsemi listing. Neither should be declared drop-in without reviewing the onsemi ordering table, package drawing, temperature range, and marking requirements.
What are the key specifications of MC14029BF that engineers should know?
The MC14029BF is a 4-bit, positive-edge-triggered binary/decade up-down counter in a 16-pin SOIC package. According to the onsemi MC14029B datasheet, it uses complementary P-channel and N-channel enhancement-mode MOS devices, supports binary and BCD operation, and includes four parallel outputs, parallel load, master reset, cascade, carry, and borrow functions. Voltage, timing, and temperature limits must be taken from the manufacturer’s electrical-characteristics tables.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MC14029BF — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose MC14029BF for a 4-bit design that requires bidirectional counting and may operate in either binary or BCD mode. Its Q0–Q3 outputs, parallel load, master reset, carry, borrow, and cascade functions suit position counters, decimal timers, event sequencers, frequency dividers, and modular arithmetic. MC14029BD is a closely related onsemi code worth evaluating when its ordering information provides a better qualification or lifecycle match, but the package and suffix must be checked. MC14029BFELG is another related 16-pin ordering code, while MC14029BCPG may suit a related production configuration. Final substitution approval should compare the onsemi ordering table, electrical characteristics, pin behavior, timing limits, and package drawing. This product is a logic IC rather than a power semiconductor, so SOA data and heatsinking are not applicable.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য MC14029BD MC14029BCPG MC14029BFELG
Package SOIC-16 SOIC-16 SOIC-16 SOIC-16
Brand onsemi onsemi onsemi onsemi
Counter Type Binary/Decade Up/Down Counter Binary/Decade Up/Down Counter Binary/Decade Up/Down Counter Binary Counter, Decade
Number of Bits 4 bit 4 bit 4 bit 4 bit
Triggering Positive edge Positive edge Positive edge Positive edge
Counting Direction Up/Down Up/Down Up/Down Up/Down
Logic Technology Complementary MOS Complementary MOS Complementary MOS Complementary MOS
Counting Modes Binary or BCD Binary or BCD Binary or BCD Binary or BCD
Surface-Mount Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC
Carrier Ordering Code MC14029BF MC14029BD MC14029BCPG MC14029BFELG

মূল পার্থক্যসমূহ

  • Bidirectional four-bit counting in one counter (বনামMC14029BD)
  • Parallel load, carry, borrow, and cascade functions (বনামMC14029BFELG)
  • Surface-mount implementation in a standard 16-pin footprint (বনামMC14029BCPG)

ডিজাইন নোট

Treat CLK as a timing-critical digital input. Route it away from the UP/DOWN, LOAD, and parallel-data traces, keep the ground return continuous beneath the device, and minimize stubs on the clock net. If a mechanical switch or sensor generates the count event, add appropriate debouncing so contact bounce cannot create unintended increments. Check setup and hold requirements in the onsemi MC14029B datasheet before using a slow control signal to trigger a counter edge.

Do not treat every MC14029B ordering code as automatically interchangeable. Verify the package drawing, pin names, electrical limits, temperature grade, qualification status, and marking requirements for MC14029BD, MC14029BCPG, or MC14029BFELG before approving a substitution. Also preserve the distinction between binary and decade operation; a design that expects rollover after ten states will behave differently if the mode-control state is incorrect.

Place the device close to the logic that decodes Q0 through Q3 to minimize output trace length and ringing on high-speed count transitions. Keep the VDD and VSS connections short and follow the manufacturer’s decoupling recommendations. In cascaded counters, preserve a consistent clock distribution strategy and check propagation delay from the first stage’s carry or borrow output to the next stage’s clock input.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

No definitive compliance declarations are stated in the manufacturer information or product listings for MC14029BF. Review the current onsemi product declaration, material compliance report, and ordering documentation before requiring a specific compliance status.

ডেটা যাচাই করা হয়েছে: 2026-11-16 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

MC14029BF MC14029BF datasheet MC14029BF datasheet pdf MC14029BF pinout MC14029BF equivalent MC14029BF replacement MC14029BF cross reference MC14029BF vs MC14029BD MC14029BF footprint MC14029BF price MC14029BF stock onsemi MC14029BF MC14029BF 4 bit up down counter MC14029BF SOIC-16 counter MC14029BF application circuit

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

onsemi MC14029BF MC14029B MC14029BD MC14029BCPG MC14029BFELG binary counter decade counter up-down counter logic IC digital semiconductor complementary MOS P-channel enhancement-mode MOSFET N-channel enhancement-mode MOSFET D-type flip-flop positive-edge triggering binary-coded decimal carry output borrow output parallel load cascade counter SOIC-16 surface mount SMD frequency divider
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন