MC14040BD - 12-Bit Binary Counter, 3-18 V | onsemi
MPN: MC14040BD ✓ সক্রিয়MC14040BD সারাংশ
A binary counter is a sequential digital-logic component that stores an integer count and advances that count when triggered. The MC14040B belongs to the counter and divider hierarchy within logic ICs. Its twelve stages divide the input clock by powers of two, allowing Q0 through Q11 to represent successive binary bits of the accumulated count. This structure supports both binary counting and programmable frequency division when selected outputs are used as the feedback clock.
The principal features include a 12-bit count capacity, negative-edge clock operation, 3 V to 18 V operating voltage, and 16-pin SOIC construction. The ripple-carry architecture provides multiple count taps without requiring a microprocessor or programmable logic device. Because the outputs are ordinary CMOS logic levels, the counter can be combined with gates, flip-flops, display drivers, and timing circuits in industrial control, instrumentation, and embedded systems.
Operationally, the device accepts a clock transition at the CLK input and transfers state through twelve internal stages. A master reset input initializes the count, while the twelve Q outputs expose the binary count bits. The manufacturer identifies time-delay circuits, counter controls, and frequency division among the intended applications. Designers should account for propagation delay through the ripple chain when cascaded counters must present a coherent multi-bit count to downstream logic.
The MC14040BD is suitable for industrial control and automation, frequency-divider modules, programmable timing references, digital time-delay circuits, event counters, and low-cost embedded sequencing systems. It is especially useful when a controller needs a repeatable binary count derived from an external clock without allocating a microcontroller input or software counter.
For reliable implementation, route the clock and reset traces away from the Q outputs, keep the supply return path short, and place the normal bypass capacitor close to the supply pins. Confirm that the clock amplitude and transition times meet the operating requirements for the selected supply voltage, and account for counter propagation delay when multiple output bits are sampled simultaneously.
This page combines the manufacturer device characteristics with package-level implementation guidance, comparison parameters, and application-oriented design notes. Those engineering details help engineers evaluate the MC14040BD for a new counter design before completing the PCB schematic, timing analysis, and qualification plan.
এর জন্য ড্রপ-ইন বিকল্প MC14040BD — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই পণ্যের জন্য কোনো ড্রপ-ইন বিকল্প পাওয়া যায়নি।
বিকল্প অনুরোধ করুনMC14040BD সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Counter Type | 12-stage ripple-carry binary counter |
| Counting Elements | 1 element |
| Count Width | 12 bits |
| Output Count | 12 binary outputs |
| Clock Edge | Negative-going edge |
| অপারেটিং সাপ্লাই ভোল্টেজ | 3 V to 18 V |
| Logic Family | MC14040B CMOS |
| Internal Device Technology | MOS P-channel and N-channel enhancement-mode devices |
| Clock Input Wave Shaping | Input wave-shaping circuit |
| প্যাকেজ | 16-pin SOIC |
| মাউন্টিং টাইপ | Surface mount |
| পিন সংখ্যা | 16 pins |
MC14040BD পিন কনফিগারেশন
| পিন 1 | CLK — Clock input; the count advances on the negative-going edge |
| পিন 2 | MR — Master reset input |
| পিন 3 | Q0 — Counter output 0 |
| পিন 4 | Q1 — Counter output 1 |
| পিন 5 | Q2 — Counter output 2 |
| পিন 6 | Q3 — Counter output 3 |
| পিন 7 | Q4 — Counter output 4 |
| পিন 8 | GND — Ground connection |
| পিন 9 | Q5 — Counter output 5 |
| পিন 10 | Q6 — Counter output 6 |
| পিন 11 | Q7 — Counter output 7 |
| পিন 12 | Q8 — Counter output 8 |
| পিন 13 | Q9 — Counter output 9 |
| পিন 14 | Q10 — Counter output 10 |
| পিন 15 | Q11 — Counter output 11 |
| পিন 16 | VDD — Positive supply connection |
সাধারণ ব্যবহার
MC14040BD এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Event Counter, Programmable Frequency Divider, Digital Time-Delay Circuit, Sequencer and Control System, Frequency Measurement and Tachometer Logic, Embedded Logic without Microcontroller.
Industrial Event Counter
The MC14040BD fits an industrial event counter because it provides 12 binary outputs and advances on each negative-going clock edge. Connect a sensor-conditioned pulse to CLK and use the Q0 through Q11 taps to represent accumulated events, elapsed intervals, or batch position. The onsemi MC14040B datasheet identifies counter controls as an intended application. Because the output stages ripple sequentially, sample the counter after allowing the worst-case propagation path to settle rather than treating all outputs as changing simultaneously. A master-reset signal can establish a deterministic starting count, while the 3 V to 18 V range supports industrial logic systems whose interface levels are carefully selected for the operating voltage.
সুপারিশকৃত
Programmable Frequency Divider
The MC14040BD can implement a hardware frequency divider by feeding a selected Q output back to the clock input, producing division based on the counter stage selected. This approach is useful when a microcontroller lacks a spare timer or when a stable divided clock must continue independently of firmware. The manufacturer datasheet explicitly lists frequency division as an intended application. Keep the feedback trace short, observe ripple propagation delay between stages, and verify the maximum clock rate against the operating voltage. A dedicated divider may consume more power than a simple flip-flop arrangement, so the design should use the lowest necessary switching rate while preserving clean output timing.
সুপারিশকৃত
Digital Time-Delay Circuit
The MC14040BD supports digital time-delay circuits by counting clock periods and presenting intermediate count states through Q0 through Q11. A gate can decode a selected bit or binary combination to create a delayed transition without relying on a software timer. The onsemi application description identifies time-delay circuits as a core use for the MC14040B. The delay accuracy depends on clock stability and counter propagation delay, while reset must be controlled so the delay starts from a defined state. For safety-related timing, add independent monitoring rather than assuming every output bit is valid during the ripple transition.
সুপারিশকৃত
Sequencer and Control System
The twelve outputs of the MC14040BD can be decoded into sequential control states for a repeating machine cycle, stepper-index controller, or deterministic industrial sequencer. Each clock pulse advances the count, and decoding Q outputs produces a one-hot or binary control sequence without requiring a microcontroller. The counter’s 3 V to 18 V operating range supports multiple control-voltage environments. Designers should define safe states for power-up, use master reset to establish a known sequence, and include external qualification for outputs that drive machinery. The ripple architecture is advantageous for simple decoding but must be considered whenever a downstream circuit captures multiple bits at once.
সুপারিশকৃত
Frequency Measurement and Tachometer Logic
The MC14040BD can provide the counting element in a low-cost frequency-measurement or tachometer system by counting reference-clock intervals between input events. Its binary outputs make the accumulated value directly available to display logic, comparator logic, or a microcontroller input bus. A stable reference clock improves measurement resolution, while reset defines the measurement window. The negative-edge count requirement means the front-end must preserve pulse polarity, and the ripple propagation delay sets the earliest valid time for reading the complete count. This arrangement is useful where a microcontroller timer is unavailable, overused, or where a hardware count must continue independently.
সুপারিশকৃত
Embedded Logic without Microcontroller
The MC14040BD enables small embedded systems to add binary counting without dedicating a microcontroller, RAM, or firmware timer. It is useful in appliance controls, test fixtures, audio synchronization dividers, and simple autonomous timers where only a count or frequency division is required. The 16-pin SOIC package provides a compact implementation, and the twelve outputs can be routed directly to comparators, display drivers, or logic gates. Because the device is a fixed 12-stage ripple counter rather than a programmable timer, changing count length requires external decoding. Confirm the exact counter output timing and maximum clock frequency in the onsemi datasheet during timing closure.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MC14040BD — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য |
|---|---|
| Package | 16-pin SOIC |
| Brand | onsemi |
| Counter Type | 12-stage ripple-carry binary counter |
| Count Width | 12 bits |
| Counting Elements | 1 element |
| Operating Supply Voltage | 3 V to 18 V |
| Clock Edge | Negative-going edge |
| Output Type | 12 binary outputs |
| Input Wave Shaping | Yes |
| Technology | MOS P-channel and N-channel enhancement-mode devices |
মূল পার্থক্যসমূহ
- Twelve individually available binary count taps (বনামHCC4017BF)
- Wide 3 V to 18 V operating range (বনামCD4040BE)
- Dedicated input wave-shaping circuit (বনামGeneric open-collector counter stage)
ডিজাইন নোট
Account for ripple propagation when the MC14040BD drives multiple downstream loads. The 12 count stages do not change simultaneously; a downstream device that samples Q0 through Q11 on one clock edge can observe an intermediate binary value. Either sample only after the complete propagation path has settled, use a lower clock rate, or add a latch if a coherent multi-bit transfer is required. This is especially important in frequency-divider feedback paths, where routing delays add to the counter’s own transition time.
Place the device-level bypass capacitor close to VDD and connect it to a short ground return. Keep the CLK net compact and route it away from Q0 through Q11 to reduce coupling into the clock input. For the MR signal, avoid long traces next to high-edge-rate clock lines because unwanted coupling can create an unintended reset. The 16-pin SOIC footprint is compact, but preserving a direct ground path remains important for clean switching behavior.
Do not substitute a generic 12-bit counter solely because the count width and supply range match. Pin assignment, negative-edge counting, reset polarity, output timing, and output drive must all be checked against the MC14040BD pin and timing descriptions in the onsemi datasheet. A decoded decade counter or binary counter with a different output arrangement may not be pin-compatible even when it appears functionally similar. Validate the complete interface before releasing a substitute to production.
Estimate power consumption from the selected supply voltage, clock activity, and the device supply-current specification before finalizing the supply design. A counter that toggles continuously can consume more power than one operating at a low clock rate even when its logic load is small. Use the onsemi datasheet supply-current and dynamic-current information for the actual operating point, then add appropriate margin to the regulator and ensure the power source can support startup and repetitive counting without disturbing adjacent timing circuits.
কমপ্লায়েন্স তথ্য
The verified manufacturer and distributor results do not explicitly state the required compliance attributes. The device is a general-purpose logic IC, so AEC-Q100 is recorded as not_applicable rather than qualified.