onsemi

MC14040BD - 12-Bit Binary Counter, 3-18 V | onsemi

部品番号: MC14040BD ✓ 生産中
3 V to 18 V Vdss 16-pin SOIC Package Negative-going edge Speed
MOQ: 1 |

MC14040BD 概要

The onsemi MC14040BD is a 12-stage ripple-carry binary counter operating from 3 V to 18 V in a 16-pin SOIC package. The device advances its count on the negative-going edge of the clock and provides twelve binary outputs for frequency division, event counting, timing, and sequential control. Its monolithic construction uses MOS P-channel and N-channel enhancement-mode devices, while an input wave-shaping circuit supports reliable clock handling.

A binary counter is a sequential digital-logic component that stores an integer count and advances that count when triggered. The MC14040B belongs to the counter and divider hierarchy within logic ICs. Its twelve stages divide the input clock by powers of two, allowing Q0 through Q11 to represent successive binary bits of the accumulated count. This structure supports both binary counting and programmable frequency division when selected outputs are used as the feedback clock.

The principal features include a 12-bit count capacity, negative-edge clock operation, 3 V to 18 V operating voltage, and 16-pin SOIC construction. The ripple-carry architecture provides multiple count taps without requiring a microprocessor or programmable logic device. Because the outputs are ordinary CMOS logic levels, the counter can be combined with gates, flip-flops, display drivers, and timing circuits in industrial control, instrumentation, and embedded systems.

Operationally, the device accepts a clock transition at the CLK input and transfers state through twelve internal stages. A master reset input initializes the count, while the twelve Q outputs expose the binary count bits. The manufacturer identifies time-delay circuits, counter controls, and frequency division among the intended applications. Designers should account for propagation delay through the ripple chain when cascaded counters must present a coherent multi-bit count to downstream logic.

The MC14040BD is suitable for industrial control and automation, frequency-divider modules, programmable timing references, digital time-delay circuits, event counters, and low-cost embedded sequencing systems. It is especially useful when a controller needs a repeatable binary count derived from an external clock without allocating a microcontroller input or software counter.

For reliable implementation, route the clock and reset traces away from the Q outputs, keep the supply return path short, and place the normal bypass capacitor close to the supply pins. Confirm that the clock amplitude and transition times meet the operating requirements for the selected supply voltage, and account for counter propagation delay when multiple output bits are sampled simultaneously.

This page combines the manufacturer device characteristics with package-level implementation guidance, comparison parameters, and application-oriented design notes. Those engineering details help engineers evaluate the MC14040BD for a new counter design before completing the PCB schematic, timing analysis, and qualification plan.

ドロップイン代替品: MC14040BD — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

この製品に利用可能なドロップイン代替品はありません。

代替品をリクエスト

MC14040BD 最大定格&電気的特性

Counter Type 12-stage ripple-carry binary counter
Counting Elements 1 element
Count Width 12 bits
Output Count 12 binary outputs
Clock Edge Negative-going edge
動作電源電圧 3 V to 18 V
Logic Family MC14040B CMOS
Internal Device Technology MOS P-channel and N-channel enhancement-mode devices
Clock Input Wave Shaping Input wave-shaping circuit
パッケージ 16-pin SOIC
実装タイプ Surface mount
ピン数 16 pins

MC14040BD ピン構成

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
ピン 1 CLK — Clock input; the count advances on the negative-going edge
ピン 2 MR — Master reset input
ピン 3 Q0 — Counter output 0
ピン 4 Q1 — Counter output 1
ピン 5 Q2 — Counter output 2
ピン 6 Q3 — Counter output 3
ピン 7 Q4 — Counter output 4
ピン 8 GND — Ground connection
ピン 9 Q5 — Counter output 5
ピン 10 Q6 — Counter output 6
ピン 11 Q7 — Counter output 7
ピン 12 Q8 — Counter output 8
ピン 13 Q9 — Counter output 9
ピン 14 Q10 — Counter output 10
ピン 15 Q11 — Counter output 11
ピン 16 VDD — Positive supply connection

主な用途

MC14040BD の用途: 6 件s: Industrial Event Counter, Programmable Frequency Divider, Digital Time-Delay Circuit, Sequencer and Control System, Frequency Measurement and Tachometer Logic, Embedded Logic without Microcontroller.

🏭

Industrial Event Counter

The MC14040BD fits an industrial event counter because it provides 12 binary outputs and advances on each negative-going clock edge. Connect a sensor-conditioned pulse to CLK and use the Q0 through Q11 taps to represent accumulated events, elapsed intervals, or batch position. The onsemi MC14040B datasheet identifies counter controls as an intended application. Because the output stages ripple sequentially, sample the counter after allowing the worst-case propagation path to settle rather than treating all outputs as changing simultaneously. A master-reset signal can establish a deterministic starting count, while the 3 V to 18 V range supports industrial logic systems whose interface levels are carefully selected for the operating voltage.

⚡

Programmable Frequency Divider

The MC14040BD can implement a hardware frequency divider by feeding a selected Q output back to the clock input, producing division based on the counter stage selected. This approach is useful when a microcontroller lacks a spare timer or when a stable divided clock must continue independently of firmware. The manufacturer datasheet explicitly lists frequency division as an intended application. Keep the feedback trace short, observe ripple propagation delay between stages, and verify the maximum clock rate against the operating voltage. A dedicated divider may consume more power than a simple flip-flop arrangement, so the design should use the lowest necessary switching rate while preserving clean output timing.

⏱️

Digital Time-Delay Circuit

The MC14040BD supports digital time-delay circuits by counting clock periods and presenting intermediate count states through Q0 through Q11. A gate can decode a selected bit or binary combination to create a delayed transition without relying on a software timer. The onsemi application description identifies time-delay circuits as a core use for the MC14040B. The delay accuracy depends on clock stability and counter propagation delay, while reset must be controlled so the delay starts from a defined state. For safety-related timing, add independent monitoring rather than assuming every output bit is valid during the ripple transition.

🔧

Sequencer and Control System

The twelve outputs of the MC14040BD can be decoded into sequential control states for a repeating machine cycle, stepper-index controller, or deterministic industrial sequencer. Each clock pulse advances the count, and decoding Q outputs produces a one-hot or binary control sequence without requiring a microcontroller. The counter’s 3 V to 18 V operating range supports multiple control-voltage environments. Designers should define safe states for power-up, use master reset to establish a known sequence, and include external qualification for outputs that drive machinery. The ripple architecture is advantageous for simple decoding but must be considered whenever a downstream circuit captures multiple bits at once.

📊

Frequency Measurement and Tachometer Logic

The MC14040BD can provide the counting element in a low-cost frequency-measurement or tachometer system by counting reference-clock intervals between input events. Its binary outputs make the accumulated value directly available to display logic, comparator logic, or a microcontroller input bus. A stable reference clock improves measurement resolution, while reset defines the measurement window. The negative-edge count requirement means the front-end must preserve pulse polarity, and the ripple propagation delay sets the earliest valid time for reading the complete count. This arrangement is useful where a microcontroller timer is unavailable, overused, or where a hardware count must continue independently.

🧩

Embedded Logic without Microcontroller

The MC14040BD enables small embedded systems to add binary counting without dedicating a microcontroller, RAM, or firmware timer. It is useful in appliance controls, test fixtures, audio synchronization dividers, and simple autonomous timers where only a count or frequency division is required. The 16-pin SOIC package provides a compact implementation, and the twelve outputs can be routed directly to comparators, display drivers, or logic gates. Because the device is a fixed 12-stage ripple counter rather than a programmable timer, changing count length requires external decoding. Confirm the exact counter output timing and maximum clock frequency in the onsemi datasheet during timing closure.

おすすめ製品の概要

MC14040BD onsemi 使用用途: Industrial Event Counter, Programmable Frequency Divider, Digital Time-Delay Circuit, Sequencer and Control System, Frequency Measurement and Tachometer Logic, Embedded Logic without Microcontroller MC14040BDG Same-family SOIC counter ordering option 使用用途: Industrial Event Counter, Digital Time-Delay Circuit, Sequencer and Control System, Embedded Logic without Microcontroller MC14040BDR2G Same-family counter option for sourcing review 使用用途: Programmable Frequency Divider, Frequency Measurement and Tachometer Logic
What is the MC14040BD?
The MC14040BD is a 12-stage ripple-carry binary counter with twelve binary outputs and a negative-going-edge clock input. According to the onsemi MC14040B datasheet, the monolithic CMOS device operates from 3 V to 18 V and increments its count when the CLK input transitions from high to low. The counter is intended for time-delay circuits, counter-control systems, and frequency-divider applications.
What is the operating voltage of the MC14040BD?
The MC14040BD operates from 3 V to 18 V, as stated in the onsemi MC14040B datasheet and the manufacturer product information. This wide supply range allows the same counter architecture to be used in both low-voltage digital systems and higher-voltage industrial control circuits. Confirm the exact input and output levels at the selected supply voltage before treating the interface as conventional 5 V CMOS.
How many bits can the MC14040BD count?
The MC14040BD contains 12 counter stages and therefore provides a 12-bit binary count across outputs Q0 through Q11. According to the onsemi datasheet, the architecture is a ripple-carry counter with 4,096 count states before the sequence repeats. The twelve taps can also be used to obtain clock division ratios corresponding to successive powers of two.
Which clock edge increments the MC14040BD?
The MC14040BD increments on the negative-going edge of the clock pulse. The onsemi MC14040B datasheet describes an input wave-shaping circuit and 12 stages of ripple-carry binary counter, confirming that the high-to-low transition initiates the count sequence. When clocking from a noisy or slow edge source, verify pulse width and rise/fall timing before relying on the counter.
Where can I download the MC14040BD datasheet PDF?
The official MC14040BD datasheet PDF is available from onsemi at https://www.onsemi.com/pdf/datasheet/mc14040b-d.pdf. The document covers the 12-stage binary counter, electrical characteristics, clocking behavior, reset function, and application information. Use the manufacturer PDF for the authoritative pin description, timing limits, operating ratings, and supply-current curves.
Where can I find the MC14040BD pinout?
The MC14040BD pin description and connection diagram are located in the onsemi MC14040B datasheet at https://www.onsemi.com/pdf/datasheet/mc14040b-d.pdf. The device uses a 16-pin SOIC configuration with CLK and master-reset functions, GND, VDD, and the twelve Q outputs. Assign PCB nets directly from that diagram rather than relying on generic counter pinouts.
How do I use the MC14040BD as a frequency divider?
The MC14040BD can divide an input clock by selecting a counter output as the feedback clock, allowing division ratios based on powers of two to be built with external routing. The onsemi datasheet identifies frequency division as an intended use. Because the ripple stages propagate sequentially, keep feedback routing short and validate the timing at the maximum intended clock frequency.
Is the MC14040BD suitable for an industrial counter application?
The MC14040BD can suit an industrial counter when the surrounding system respects its 3 V to 18 V supply range and timing limits. Its 12-bit counter capacity, master reset, and individual binary outputs support event counting and programmable time-delay circuits. For safety-critical or severe industrial environments, check temperature range, ESD rating, and qualification status against the application requirements.
What is the best drop-in replacement for the MC14040BD?
The most defensible drop-in choice is an onsemi MC14040B ordering variant that preserves the 16-pin SOIC footprint, 12-bit counter function, negative-edge clocking, and 3 V to 18 V supply range. The cross-reference search identifies no manufacturer-published equivalent with enough pin-level detail to recommend a different family. Use the Request a Quote form on this page to confirm exact suffix, package, stock, and lead time before substitution.
Can another manufacturer replace the MC14040BD pin-to-pin?
A cross-manufacturer replacement should not be assumed without confirming identical pin assignments, clock edge, reset polarity, supply voltage, and output drive. The available cross-reference search does not identify a verified competing 16-pin SOIC equivalent. Review the onsemi MC14040B datasheet and the candidate manufacturer’s pin diagram, then request confirmation through the Request a Quote form before approving a substitution.
MC14040BD versus a microcontroller timer: which is better?
The MC14040BD is better when the design needs a simple hardware counter with no firmware overhead, while a microcontroller timer is better when the count must be read, reconfigured, or processed in software. The MC14040BD provides 12 binary count outputs directly and advances on each negative clock edge. It reduces processor involvement but offers less programmability than a timer peripheral.
When should I choose the MC14040BD over a binary counter module?
Choose the MC14040BD when a compact, deterministic 12-bit counter is required and the 16-pin SOIC footprint fits the PCB. It also fits designs that need Q outputs rather than a serial numerical output. Choose a module when the design needs ready-made connectors, a display, or enclosure support and is willing to accept the module’s larger footprint and board-level behavior.
Is the MC14040BD in stock?
Current stock should be checked through the Request a Quote form on this page because inventory changes by package suffix, quantity, and regional supply. The MC14040BD is listed by major distributors, but that listing alone does not guarantee a specific quantity is immediately available. Include the required suffix, package, annual usage, and target quantity in the quote request.
What is the price of the MC14040BD?
The current price depends on the exact package suffix, order quantity, and supply status. Submit the required MC14040BD configuration through the Request a Quote form on this page for a current quotation and lead time. Request the 16-pin SOIC version explicitly if that package is required, and provide your target annual and single-order quantities for accurate sourcing.
What is the lead time for the MC14040BD?
The lead time depends on the manufacturer’s available inventory and the production outlook for the requested package suffix and quantity. Use the Request a Quote form on this page to request a current lead-time statement for MC14040BD. Include scheduled build dates, forecast quantities, and whether substitutions are acceptable so the supplier can respond to the actual procurement requirement.
What are the key specifications of the MC14040BD that engineers should know?
The key MC14040BD specifications are a 12-bit ripple-carry counter, negative-going-edge clock operation, 3 V to 18 V operation, twelve binary outputs, and a 16-pin SOIC package. According to the onsemi MC14040B datasheet, the monolithic MOS construction and input wave-shaping circuit support counter, delay, and frequency-divider applications. Verify timing and current limits in the manufacturer datasheet for the final design.
What can replace the MC14040BD?
A valid replacement must match the 16-pin SOIC footprint, 12-bit count function, negative-edge clock, reset behavior, and 3 V to 18 V supply range. No competing manufacturer part is confirmed by the available cross-reference results, so the safest route is an onsemi MC14040B ordering option with the same package and electrical function. Confirm the exact suffix through the Request a Quote form before changing the BOM.
Is the MC14040BD the same as MC14040BDR2G?
MC14040BDR2G is an onsemi ordering variant associated with the same MC14040B counter family, while MC14040BD is the specified 16-pin SOIC version. Ordering suffixes can identify temperature, packing, and other commercial attributes, so they must not be treated as interchangeable without checking the manufacturer ordering table. The datasheet is the authority for electrical equivalence and the package delivered with each suffix.

エンジニアリング参考データ: MC14040BD — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the MC14040BD when the design requires a dedicated 12-bit binary counter in a 16-pin SOIC package, especially when binary count taps, negative-edge counting, and power-of-two frequency division are important. It is a strong fit for simple industrial event counters, digital delays, and fixed sequencers that do not need software programmability. A microcontroller timer is preferable when the count value must be read frequently, when the count length must be adjustable, or when firmware can provide monitoring and recovery. A decade-counter device is preferable when decoded one-of-ten outputs are required. Before choosing any alternative, verify the physical footprint, pin assignment, clock edge, reset polarity, electrical limits, and output timing. No competing manufacturer part is confirmed as a pin-to-pin replacement by the available cross-reference information, so use an onsemi ordering option when PCB and function must remain unchanged.

代替品との比較

パラメータ この製品
Package 16-pin SOIC
Brand onsemi
Counter Type 12-stage ripple-carry binary counter
Count Width 12 bits
Counting Elements 1 element
Operating Supply Voltage 3 V to 18 V
Clock Edge Negative-going edge
Output Type 12 binary outputs
Input Wave Shaping Yes
Technology MOS P-channel and N-channel enhancement-mode devices

主な差別化要因

  • Twelve individually available binary count taps (vs HCC4017BF)
  • Wide 3 V to 18 V operating range (vs CD4040BE)
  • Dedicated input wave-shaping circuit (vs Generic open-collector counter stage)

設計ノート

Account for ripple propagation when the MC14040BD drives multiple downstream loads. The 12 count stages do not change simultaneously; a downstream device that samples Q0 through Q11 on one clock edge can observe an intermediate binary value. Either sample only after the complete propagation path has settled, use a lower clock rate, or add a latch if a coherent multi-bit transfer is required. This is especially important in frequency-divider feedback paths, where routing delays add to the counter’s own transition time.

Place the device-level bypass capacitor close to VDD and connect it to a short ground return. Keep the CLK net compact and route it away from Q0 through Q11 to reduce coupling into the clock input. For the MR signal, avoid long traces next to high-edge-rate clock lines because unwanted coupling can create an unintended reset. The 16-pin SOIC footprint is compact, but preserving a direct ground path remains important for clean switching behavior.

Do not substitute a generic 12-bit counter solely because the count width and supply range match. Pin assignment, negative-edge counting, reset polarity, output timing, and output drive must all be checked against the MC14040BD pin and timing descriptions in the onsemi datasheet. A decoded decade counter or binary counter with a different output arrangement may not be pin-compatible even when it appears functionally similar. Validate the complete interface before releasing a substitute to production.

Estimate power consumption from the selected supply voltage, clock activity, and the device supply-current specification before finalizing the supply design. A counter that toggles continuously can consume more power than one operating at a low clock rate even when its logic load is small. Use the onsemi datasheet supply-current and dynamic-current information for the actual operating point, then add appropriate margin to the regulator and ensure the power source can support startup and repetitive counting without disturbing adjacent timing circuits.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The verified manufacturer and distributor results do not explicitly state the required compliance attributes. The device is a general-purpose logic IC, so AEC-Q100 is recorded as not_applicable rather than qualified.

関連検索

MC14040BD datasheet MC14040BD pinout MC14040BD datasheet pdf MC14040BD equivalent MC14040BD replacement MC14040BD cross reference MC14040BD footprint MC14040BD frequency divider MC14040BD 12 bit counter onsemi MC14040BD MC14040BD price MC14040BD stock MC14040BD vs CD4040BE MC14040BD application circuit

関連部品&用語

onsemi MC14040BD MC14040B MC14040BDG MC14040BDR2G binary counter ripple-carry counter counter and divider logic IC CMOS MOS P-channel MOS N-channel negative-edge clock 12-bit counter frequency divider master reset time-delay circuit 3 V to 18 V 16-pin SOIC surface mount SMD industrial counter digital sequencer input wave-shaping circuit
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示