MC145483DT - 13-Bit PCM Codec-Filter | NXP Semiconductors
MPN: MC145483DT ✗ জীবনকালের সমাপ্তিMC145483DT সারাংশ
A PCM codec-filter is an interface IC that combines analog-to-digital conversion, digital-to-analog conversion, and signal filtering. In the electronic hierarchy, it belongs to the audio codec family, connects analog voice signals to digital processing systems, and ultimately supports communication equipment such as voice terminals, telephony interfaces, and embedded audio systems. Its integrated filter stages reduce the external circuitry needed for voice-band digitization and reconstruction.
The MC145483DT provides a 13-bit conversion resolution, one analog input path, one analog output path, and 2s-complement PCM data formatting. The manufacturer datasheet describes the device in 20-pin SOG, SSOP, and TSSOP packages, with the MC145483DT ordered as a 20-pin TSSOP implementation. These characteristics make the device particularly relevant to designs requiring compact voice-band conversion rather than a full-featured multimedia audio codec.
The device performs voice digitization, reconstruction, band limiting, and smoothing within one integrated package. Its recommended 2.7V to 5.5V operating range supports both 3.3V and 5V system rails. Operation down to 2.3V is possible with reduced performance, which can be useful in low-voltage designs after signal-quality and timing requirements have been checked against the manufacturer datasheet.
Typical applications include digital telephone equipment, voice communication terminals, speech-processing systems, industrial voice interfaces, and embedded audio subsystems. In these systems, the MC145483DT converts an analog voice signal into PCM data for transmission or processing and reconstructs a filtered analog voice output from PCM data received from a digital channel. A host processor or communications controller supplies the required clock and serial interface signals.
Designers should verify the device pinout, interface timing, analog impedance, and external filtering requirements in the manufacturer datasheet before PCB release. The 20-pin TSSOP footprint requires careful routing of analog and digital signals, short return paths, and stable supply bypassing. Because the MC145483DT is an older catalog component, procurement planning should also confirm lifecycle status and manufacturing availability before committing to a new production design.
This page combines the MC145483DT's principal electrical characteristics, package information, sourcing guidance, and verified replacement analysis with practical PCB and integration guidance. It distinguishes a documented drop-in sourcing option from package variants that cannot be substituted without redesigning the PCB.
এর জন্য ড্রপ-ইন বিকল্প MC145483DT — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
MC145483DT
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →MC145483DT সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Device Type | 13-bit linear PCM codec-filter |
| ADC Resolution | 13 bit |
| DAC Resolution | 13 bit |
| Number of ADCs | 1 |
| Number of DACs | 1 |
| Recommended Supply Voltage | 2.7V to 5.5V |
| Reduced-Performance Supply Voltage | 2.3V |
| Data Format | 2s-complement linear PCM |
| প্যাকেজ | 20-pin TSSOP |
| Package Pin Count | 20 pins |
| Package Shape | Rectangular |
| Terminal Form | Gull wing |
| Temperature Grade | Industrial |
| Signal Functions | Voice digitization, reconstruction, band limiting, and smoothing |
| Operating Mode | Synchronous operation |
| মাউন্টিং টাইপ | Surface mount |
MC145483DT rectangular পিন কনফিগারেশন গাইড
MC145483DT (rectangular প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MC145483DT.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
MC145483DT এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Digital Telephony Voice Interface, Voice Communication Terminal, Industrial Voice Monitoring System, Speech Processing Embedded System, Hands-Free Voice Communication, Voice Recording and Playback Module.
Digital Telephony Voice Interface
The MC145483DT fits digital telephony designs that need a dedicated voice-band conversion stage rather than a general multimedia codec. Its single 13-bit ADC digitizes an analog microphone or line signal, while the single 13-bit DAC reconstructs a filtered analog voice output. The integrated band-limiting and smoothing functions reduce the external filtering burden. A 3.3V system can use the recommended 2.7V to 5.5V supply range, although clocking, serial timing, and analog levels must follow the manufacturer datasheet.
সুপারিশকৃত
Voice Communication Terminal
The MC145483DT can serve as the analog voice boundary in a communication terminal that receives and transmits PCM samples over a synchronous digital bus. Its 13-bit resolution is appropriate for voice-band systems, while the integrated reconstruction smoothing and band limiting help condition the analog output. The 20-pin TSSOP package supports compact board layouts, and operation from 2.7V to 5.5V supports both 3.3V and 5V logic environments. Interface timing and filtering must be verified before layout release.
সুপারিশকৃত
Industrial Voice Monitoring System
The MC145483DT is suitable for industrial voice-monitoring equipment that must capture a limited-band speech signal and reconstruct an audible monitoring output. The one ADC and one DAC arrangement supports a compact bidirectional voice path, while the 13-bit PCM format fits voice-processing systems and the 2.7V to 5.5V recommended range accommodates industrial 3.3V rails. Designers should isolate noisy analog inputs, maintain short return paths, and confirm electromagnetic and signal-integrity requirements at the system level.
সুপারিশকৃত
Speech Processing Embedded System
The MC145483DT can bridge an analog voice source to an embedded speech processor through its 13-bit PCM conversion path. Digitization, reconstruction, band limiting, and smoothing are integrated into one codec-filter, reducing the number of separate conversion and filter blocks. The device supports synchronous operation and a recommended 2.7V to 5.5V supply range, making it practical for 3.3V embedded designs. Firmware and hardware integration must use the documented clock relationships, framing format, and 2s-complement data convention.
সুপারিশকৃত
Hands-Free Voice Communication
The MC145483DT can support hands-free voice communication links where a compact codec-filter is preferred over a feature-rich multimedia codec. Its single analog input and output provide the basic speech conversion path, and the integrated voice filtering functions support reconstruction into a speaker or line output. The 20-pin TSSOP package assists compact layouts, while 2.7V to 5.5V operation accommodates portable 3.3V systems. Microphone conditioning, output drive, and acoustic layout remain important to overall voice quality.
সুপারিশকৃত
Voice Recording and Playback Module
The MC145483DT fits legacy voice recording and playback modules that require a simple PCM codec-filter in a 20-pin TSSOP footprint. The ADC path digitizes the incoming voice signal, the DAC path reconstructs PCM playback, and the integrated band-limiting and smoothing functions support voice-band operation. A 13-bit conversion format and 2.7V to 5.5V recommended supply range provide a straightforward implementation basis. The module should validate timing margins, bypass stability, analog noise, and storage bandwidth before production.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MC145483DT — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | MC145483DT |
|---|---|---|
| Manufacturer | NXP Semiconductors | Rochester Electronics |
| Package | 20-pin TSSOP | 20-pin TSSOP |
| Device Type | 13-bit linear PCM codec-filter | 13-bit linear PCM codec-filter |
| ADC Resolution | 13 bit | 13 bit |
| DAC Resolution | 13 bit | 13 bit |
| Number of ADCs | 1 | 1 |
| Number of DACs | 1 | 1 |
| Recommended Supply Voltage | 2.7V to 5.5V | 2.7V to 5.5V |
| Data Format | 2s-complement PCM | 2s-complement PCM |
মূল পার্থক্যসমূহ
- Identical voice-conversion configuration (বনামMC145483DT from Rochester Electronics)
- Matching digital audio format (বনামMC145483DT from Rochester Electronics)
- Same recommended operating range (বনামMC145483DT from Rochester Electronics)
ডিজাইন নোট
Route the MC145483DT analog input and output paths directly to their associated pins, and place the manufacturer-recommended bypass capacitors close to the supply and ground pins. Keep digital clock and data traces away from the analog signal traces. Because the part uses a 20-pin TSSOP footprint, preserve the documented pin numbering and provide adequate copper around the leads for reliable soldering and thermal performance.
Use the manufacturer datasheet's clocking, framing, and synchronization requirements without alteration. The MC145483DT supports synchronous operation, so the host clock, data strobes, and enable signals must have clean transitions and adequate setup and hold margins. Analyze the complete path from the voice source or playback destination, including source impedance, return paths, and any external filtering, rather than treating the codec as an isolated converter.
Do not treat other MC145483 package options as drop-in replacements. The family includes 20-pin SOG, SSOP, and TSSOP versions plus a 32-pin QFN version, but only an identical TSSOP footprint and pin arrangement can replace the MC145483DT without PCB changes. Also avoid designing new 2.3V operation around the reduced-performance statement; use the recommended 2.7V to 5.5V range unless the complete electrical performance has been validated.
কমপ্লায়েন্স তথ্য
Compliance attributes were not identified in the manufacturer datasheet listing or distributor records for MC145483DT.