MC145483DT - 13-Bit PCM Codec-Filter | NXP Semiconductors
MPN: MC145483DT ✗ 停產MC145483DT 概覽
A PCM codec-filter is an interface IC that combines analog-to-digital conversion, digital-to-analog conversion, and signal filtering. In the electronic hierarchy, it belongs to the audio codec family, connects analog voice signals to digital processing systems, and ultimately supports communication equipment such as voice terminals, telephony interfaces, and embedded audio systems. Its integrated filter stages reduce the external circuitry needed for voice-band digitization and reconstruction.
The MC145483DT provides a 13-bit conversion resolution, one analog input path, one analog output path, and 2s-complement PCM data formatting. The manufacturer datasheet describes the device in 20-pin SOG, SSOP, and TSSOP packages, with the MC145483DT ordered as a 20-pin TSSOP implementation. These characteristics make the device particularly relevant to designs requiring compact voice-band conversion rather than a full-featured multimedia audio codec.
The device performs voice digitization, reconstruction, band limiting, and smoothing within one integrated package. Its recommended 2.7V to 5.5V operating range supports both 3.3V and 5V system rails. Operation down to 2.3V is possible with reduced performance, which can be useful in low-voltage designs after signal-quality and timing requirements have been checked against the manufacturer datasheet.
Typical applications include digital telephone equipment, voice communication terminals, speech-processing systems, industrial voice interfaces, and embedded audio subsystems. In these systems, the MC145483DT converts an analog voice signal into PCM data for transmission or processing and reconstructs a filtered analog voice output from PCM data received from a digital channel. A host processor or communications controller supplies the required clock and serial interface signals.
Designers should verify the device pinout, interface timing, analog impedance, and external filtering requirements in the manufacturer datasheet before PCB release. The 20-pin TSSOP footprint requires careful routing of analog and digital signals, short return paths, and stable supply bypassing. Because the MC145483DT is an older catalog component, procurement planning should also confirm lifecycle status and manufacturing availability before committing to a new production design.
This page combines the MC145483DT's principal electrical characteristics, package information, sourcing guidance, and verified replacement analysis with practical PCB and integration guidance. It distinguishes a documented drop-in sourcing option from package variants that cannot be substituted without redesigning the PCB.
直接替換替代品,適用於 MC145483DT — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
MC145483DT
✅ 直接替換聯絡詢價
查看資料表 →MC145483DT 最大額定值與電氣特性
| Device Type | 13-bit linear PCM codec-filter |
| ADC Resolution | 13 bit |
| DAC Resolution | 13 bit |
| Number of ADCs | 1 |
| Number of DACs | 1 |
| Recommended Supply Voltage | 2.7V to 5.5V |
| Reduced-Performance Supply Voltage | 2.3V |
| Data Format | 2s-complement linear PCM |
| 封裝 | 20-pin TSSOP |
| Package Pin Count | 20 pins |
| Package Shape | Rectangular |
| Terminal Form | Gull wing |
| Temperature Grade | Industrial |
| Signal Functions | Voice digitization, reconstruction, band limiting, and smoothing |
| Operating Mode | Synchronous operation |
| 安裝類型 | Surface mount |
MC145483DT rectangular 腳位配置指南
MC145483DT(rectangular 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: MC145483DT.
請參閱 資料表 以查看完整腳位配置。
典型應用
MC145483DT 適用於 6 應用s: Digital Telephony Voice Interface, Voice Communication Terminal, Industrial Voice Monitoring System, Speech Processing Embedded System, Hands-Free Voice Communication, Voice Recording and Playback Module.
Digital Telephony Voice Interface
The MC145483DT fits digital telephony designs that need a dedicated voice-band conversion stage rather than a general multimedia codec. Its single 13-bit ADC digitizes an analog microphone or line signal, while the single 13-bit DAC reconstructs a filtered analog voice output. The integrated band-limiting and smoothing functions reduce the external filtering burden. A 3.3V system can use the recommended 2.7V to 5.5V supply range, although clocking, serial timing, and analog levels must follow the manufacturer datasheet.
推薦
Voice Communication Terminal
The MC145483DT can serve as the analog voice boundary in a communication terminal that receives and transmits PCM samples over a synchronous digital bus. Its 13-bit resolution is appropriate for voice-band systems, while the integrated reconstruction smoothing and band limiting help condition the analog output. The 20-pin TSSOP package supports compact board layouts, and operation from 2.7V to 5.5V supports both 3.3V and 5V logic environments. Interface timing and filtering must be verified before layout release.
推薦
Industrial Voice Monitoring System
The MC145483DT is suitable for industrial voice-monitoring equipment that must capture a limited-band speech signal and reconstruct an audible monitoring output. The one ADC and one DAC arrangement supports a compact bidirectional voice path, while the 13-bit PCM format fits voice-processing systems and the 2.7V to 5.5V recommended range accommodates industrial 3.3V rails. Designers should isolate noisy analog inputs, maintain short return paths, and confirm electromagnetic and signal-integrity requirements at the system level.
推薦
Speech Processing Embedded System
The MC145483DT can bridge an analog voice source to an embedded speech processor through its 13-bit PCM conversion path. Digitization, reconstruction, band limiting, and smoothing are integrated into one codec-filter, reducing the number of separate conversion and filter blocks. The device supports synchronous operation and a recommended 2.7V to 5.5V supply range, making it practical for 3.3V embedded designs. Firmware and hardware integration must use the documented clock relationships, framing format, and 2s-complement data convention.
推薦
Hands-Free Voice Communication
The MC145483DT can support hands-free voice communication links where a compact codec-filter is preferred over a feature-rich multimedia codec. Its single analog input and output provide the basic speech conversion path, and the integrated voice filtering functions support reconstruction into a speaker or line output. The 20-pin TSSOP package assists compact layouts, while 2.7V to 5.5V operation accommodates portable 3.3V systems. Microphone conditioning, output drive, and acoustic layout remain important to overall voice quality.
推薦
Voice Recording and Playback Module
The MC145483DT fits legacy voice recording and playback modules that require a simple PCM codec-filter in a 20-pin TSSOP footprint. The ADC path digitizes the incoming voice signal, the DAC path reconstructs PCM playback, and the integrated band-limiting and smoothing functions support voice-band operation. A 13-bit conversion format and 2.7V to 5.5V recommended supply range provide a straightforward implementation basis. The module should validate timing margins, bypass stability, analog noise, and storage bandwidth before production.
推薦
推薦產品摘要
工程參考資料,適用於 MC145483DT — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MC145483DT |
|---|---|---|
| Manufacturer | NXP Semiconductors | Rochester Electronics |
| Package | 20-pin TSSOP | 20-pin TSSOP |
| Device Type | 13-bit linear PCM codec-filter | 13-bit linear PCM codec-filter |
| ADC Resolution | 13 bit | 13 bit |
| DAC Resolution | 13 bit | 13 bit |
| Number of ADCs | 1 | 1 |
| Number of DACs | 1 | 1 |
| Recommended Supply Voltage | 2.7V to 5.5V | 2.7V to 5.5V |
| Data Format | 2s-complement PCM | 2s-complement PCM |
主要差異化特點
- Identical voice-conversion configuration (對比MC145483DT from Rochester Electronics)
- Matching digital audio format (對比MC145483DT from Rochester Electronics)
- Same recommended operating range (對比MC145483DT from Rochester Electronics)
設計說明
Route the MC145483DT analog input and output paths directly to their associated pins, and place the manufacturer-recommended bypass capacitors close to the supply and ground pins. Keep digital clock and data traces away from the analog signal traces. Because the part uses a 20-pin TSSOP footprint, preserve the documented pin numbering and provide adequate copper around the leads for reliable soldering and thermal performance.
Use the manufacturer datasheet's clocking, framing, and synchronization requirements without alteration. The MC145483DT supports synchronous operation, so the host clock, data strobes, and enable signals must have clean transitions and adequate setup and hold margins. Analyze the complete path from the voice source or playback destination, including source impedance, return paths, and any external filtering, rather than treating the codec as an isolated converter.
Do not treat other MC145483 package options as drop-in replacements. The family includes 20-pin SOG, SSOP, and TSSOP versions plus a 32-pin QFN version, but only an identical TSSOP footprint and pin arrangement can replace the MC145483DT without PCB changes. Also avoid designing new 2.3V operation around the reduced-performance statement; use the recommended 2.7V to 5.5V range unless the complete electrical performance has been validated.
合規資訊
Compliance attributes were not identified in the manufacturer datasheet listing or distributor records for MC145483DT.