NXP Semiconductors

MC145483DT - 13-Bit PCM Codec-Filter | NXP Semiconductors

MPN: MC145483DT ✗ Cuối đời
2.7V to 5.5V Vdss 20-pin TSSOP Package
MOQ: 1 |

MC145483DT Tóm tắt

The NXP Semiconductors MC145483DT is a 13-bit linear PCM codec-filter with one ADC and one DAC, designed for voice digitization and reconstruction in digital communication equipment. It operates from a recommended 2.7V to 5.5V supply, can operate down to 2.3V with reduced performance, and is packaged in a 20-pin TSSOP. The codec uses 2s-complement PCM data and supports synchronous operation for deterministic digital audio interfaces.

A PCM codec-filter is an interface IC that combines analog-to-digital conversion, digital-to-analog conversion, and signal filtering. In the electronic hierarchy, it belongs to the audio codec family, connects analog voice signals to digital processing systems, and ultimately supports communication equipment such as voice terminals, telephony interfaces, and embedded audio systems. Its integrated filter stages reduce the external circuitry needed for voice-band digitization and reconstruction.

The MC145483DT provides a 13-bit conversion resolution, one analog input path, one analog output path, and 2s-complement PCM data formatting. The manufacturer datasheet describes the device in 20-pin SOG, SSOP, and TSSOP packages, with the MC145483DT ordered as a 20-pin TSSOP implementation. These characteristics make the device particularly relevant to designs requiring compact voice-band conversion rather than a full-featured multimedia audio codec.

The device performs voice digitization, reconstruction, band limiting, and smoothing within one integrated package. Its recommended 2.7V to 5.5V operating range supports both 3.3V and 5V system rails. Operation down to 2.3V is possible with reduced performance, which can be useful in low-voltage designs after signal-quality and timing requirements have been checked against the manufacturer datasheet.

Typical applications include digital telephone equipment, voice communication terminals, speech-processing systems, industrial voice interfaces, and embedded audio subsystems. In these systems, the MC145483DT converts an analog voice signal into PCM data for transmission or processing and reconstructs a filtered analog voice output from PCM data received from a digital channel. A host processor or communications controller supplies the required clock and serial interface signals.

Designers should verify the device pinout, interface timing, analog impedance, and external filtering requirements in the manufacturer datasheet before PCB release. The 20-pin TSSOP footprint requires careful routing of analog and digital signals, short return paths, and stable supply bypassing. Because the MC145483DT is an older catalog component, procurement planning should also confirm lifecycle status and manufacturing availability before committing to a new production design.

This page combines the MC145483DT's principal electrical characteristics, package information, sourcing guidance, and verified replacement analysis with practical PCB and integration guidance. It distinguishes a documented drop-in sourcing option from package variants that cannot be substituted without redesigning the PCB.

Bộ thay thế dễ dàng lắp đặt cho MC145483DT — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

MC145483DT

✅ Drop-In
NXP Semiconductors
📦 20-pin TSSOP
13-bit linear PCM codec-filter · 13 bit · 13 bit · 1 · 1 · 2.7V to 5.5V · 2.3V · 2s-complement linear PCM

Liên hệ để biết giá

Xem tài liệu →

MC145483DT Tỷ lệ tối đa & tính chất điện

Device Type 13-bit linear PCM codec-filter
ADC Resolution 13 bit
DAC Resolution 13 bit
Number of ADCs 1
Number of DACs 1
Recommended Supply Voltage 2.7V to 5.5V
Reduced-Performance Supply Voltage 2.3V
Data Format 2s-complement linear PCM
Hộp 20-pin TSSOP
Package Pin Count 20 pins
Package Shape Rectangular
Terminal Form Gull wing
Temperature Grade Industrial
Signal Functions Voice digitization, reconstruction, band limiting, and smoothing
Operating Mode Synchronous operation
Kiểu lắp đặt Surface mount

Hướng dẫn cấu hình chân MC145483DT rectangular

Cấu hình chân cho MC145483DT (rectangular gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân rectangular cho MC145483DT

Không có dữ liệu chân cụ thể sẵn có cho MC145483DT.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

MC145483DT phù hợp cho 6 Áp dụngs: Digital Telephony Voice Interface, Voice Communication Terminal, Industrial Voice Monitoring System, Speech Processing Embedded System, Hands-Free Voice Communication, Voice Recording and Playback Module.

📱

Digital Telephony Voice Interface

The MC145483DT fits digital telephony designs that need a dedicated voice-band conversion stage rather than a general multimedia codec. Its single 13-bit ADC digitizes an analog microphone or line signal, while the single 13-bit DAC reconstructs a filtered analog voice output. The integrated band-limiting and smoothing functions reduce the external filtering burden. A 3.3V system can use the recommended 2.7V to 5.5V supply range, although clocking, serial timing, and analog levels must follow the manufacturer datasheet.

🌐

Voice Communication Terminal

The MC145483DT can serve as the analog voice boundary in a communication terminal that receives and transmits PCM samples over a synchronous digital bus. Its 13-bit resolution is appropriate for voice-band systems, while the integrated reconstruction smoothing and band limiting help condition the analog output. The 20-pin TSSOP package supports compact board layouts, and operation from 2.7V to 5.5V supports both 3.3V and 5V logic environments. Interface timing and filtering must be verified before layout release.

🏭

Industrial Voice Monitoring System

The MC145483DT is suitable for industrial voice-monitoring equipment that must capture a limited-band speech signal and reconstruct an audible monitoring output. The one ADC and one DAC arrangement supports a compact bidirectional voice path, while the 13-bit PCM format fits voice-processing systems and the 2.7V to 5.5V recommended range accommodates industrial 3.3V rails. Designers should isolate noisy analog inputs, maintain short return paths, and confirm electromagnetic and signal-integrity requirements at the system level.

🧩

Speech Processing Embedded System

The MC145483DT can bridge an analog voice source to an embedded speech processor through its 13-bit PCM conversion path. Digitization, reconstruction, band limiting, and smoothing are integrated into one codec-filter, reducing the number of separate conversion and filter blocks. The device supports synchronous operation and a recommended 2.7V to 5.5V supply range, making it practical for 3.3V embedded designs. Firmware and hardware integration must use the documented clock relationships, framing format, and 2s-complement data convention.

🎧

Hands-Free Voice Communication

The MC145483DT can support hands-free voice communication links where a compact codec-filter is preferred over a feature-rich multimedia codec. Its single analog input and output provide the basic speech conversion path, and the integrated voice filtering functions support reconstruction into a speaker or line output. The 20-pin TSSOP package assists compact layouts, while 2.7V to 5.5V operation accommodates portable 3.3V systems. Microphone conditioning, output drive, and acoustic layout remain important to overall voice quality.

🔧

Voice Recording and Playback Module

The MC145483DT fits legacy voice recording and playback modules that require a simple PCM codec-filter in a 20-pin TSSOP footprint. The ADC path digitizes the incoming voice signal, the DAC path reconstructs PCM playback, and the integrated band-limiting and smoothing functions support voice-band operation. A 13-bit conversion format and 2.7V to 5.5V recommended supply range provide a straightforward implementation basis. The module should validate timing margins, bypass stability, analog noise, and storage bandwidth before production.

What is the MC145483DT?
The MC145483DT is a 13-bit linear PCM codec-filter with one ADC and one DAC for voice digitization and reconstruction. According to the manufacturer datasheet, it uses 2s-complement PCM data, performs band limiting and smoothing, supports synchronous operation, and is offered in the MC145483DT ordering option as a 20-pin TSSOP device.
What is the operating voltage of MC145483DT?
The recommended operating voltage for the MC145483DT is 2.7V to 5.5V. The device can also operate down to 2.3V with reduced performance, according to the manufacturer datasheet. A design targeting 3.3V or 5V rails therefore falls within the recommended range, while a 2.3V implementation requires careful verification of signal quality and timing.
What are the key specifications of MC145483DT that engineers should know?
The MC145483DT provides 13-bit conversion resolution, one ADC, one DAC, 2s-complement PCM formatting, and synchronous operation. The manufacturer datasheet identifies a recommended 2.7V to 5.5V supply and a 20-pin TSSOP package for the DT ordering option. The device also integrates the filtering functions needed for voice digitization, reconstruction, band limiting, and smoothing.
Where can I download the MC145483DT datasheet PDF?
The MC145483DT datasheet PDF is available from the manufacturer-document listing linked on this page. It identifies the device as a 13-bit linear PCM codec-filter and describes the 20-pin SOG, SSOP, and TSSOP family options. Use the pin-description table, timing diagrams, recommended application circuit, and electrical-characteristics tables when assigning PCB signals and validating the 2.7V to 5.5V recommended supply range.
Where can I find the MC145483DT pinout?
The MC145483DT pinout is shown in the manufacturer datasheet for the 20-pin TSSOP package. Assign pin connections from the package pin-description and connection diagrams rather than relying only on functional pin names. The MC145483DT includes analog, digital, clock, power, and ground connections, so preserving the documented pin sequence is essential for a layout based on the TSSOP footprint.
What can replace the MC145483DT as a drop-in part?
A documented drop-in sourcing option is MC145483DT manufactured by Rochester Electronics, which uses the same MPN and retains the MC145483 device identity. The verified cross-reference results do not establish five distinct pin-compatible MPNs with the same TSSOP footprint and comparable functions. The Rochester Electronics option is therefore the only listed drop-in, while other MC145483 package options should not be assumed to be interchangeable.
Is MC145483DT the same as the MC145483 family?
The MC145483DT is a package-specific ordering option within the MC145483 codec-filter family. The manufacturer datasheet says the MC145483 family is offered in 20-pin SOG, SSOP, and TSSOP packages and in a 32-pin QFN package. The DT part is identified as a 20-pin TSSOP implementation, so another family member is only a functional equivalent unless its exact package and pinout match.
What is the difference between MC145483DT and other MC145483 package options?
The primary difference is the physical package and its corresponding footprint and pin assignment. The manufacturer datasheet describes MC145483 options in 20-pin SOG, SSOP, and TSSOP packages, plus a 32-pin QFN package, while MC145483DT is the 20-pin TSSOP version. Functional similarity does not make an SOG, SSOP, or QFN option a drop-in replacement for an existing TSSOP PCB.
When should I choose MC145483DT over another PCM codec?
Choose MC145483DT when the design needs a dedicated 13-bit voice codec-filter with one ADC, one DAC, and an existing 20-pin TSSOP footprint. Its integrated voice digitization, reconstruction, band-limiting, and smoothing functions can simplify a voice interface. For multimedia playback, higher-resolution audio, or a different PCB footprint, evaluate a modern audio codec instead of assuming functional interchangeability.
Is MC145483DT suitable for a 3.3V voice communication design?
Yes, the MC145483DT is suitable for a 3.3V voice communication design because its recommended operating range is 2.7V to 5.5V. The device can digitize and reconstruct voice signals using its single ADC and DAC paths. Confirm clocking, serial-data timing, analog levels, filtering, and bypass requirements in the manufacturer datasheet before production release.
What thermal and power considerations apply to MC145483DT?
The MC145483DT is a 20-pin TSSOP analog interface IC rather than a power semiconductor, so a safe operating area chart is not applicable. Keep the supply within the recommended 2.7V to 5.5V range and use the manufacturer-recommended bypass capacitors with short ground paths. Use normal PCB copper spreading and check the ambient-temperature rise at the intended supply voltage and analog operating duty cycle.
Can MC145483DT replace a general-purpose audio codec?
The MC145483DT can serve voice-band tasks, but it is not automatically interchangeable with a general-purpose audio codec. It provides 13-bit PCM conversion with integrated voice filtering, while multimedia codecs may provide wider bandwidth, greater resolution, additional inputs, or digital audio formats. Compatibility also requires matching the existing TSSOP footprint, pin functions, data format, clocking, and control sequence.
Where can I buy MC145483DT and what is the lead time?
Use the Request a Quote form on this page to ask about MC145483DT availability, lead time, and order quantities. The part is an older catalog device, so current production status and confirmed stock should be checked before assigning it to a new design. A complete lifecycle approval should also include manufacturing continuation and any available long-term supply.
What is the price of MC145483DT?
Use the Request a Quote form on this page for the current MC145483DT unit price and volume availability. Pricing for this legacy codec can vary with quantity, sourcing status, and package handling requirements. The form allows engineers to request a current quotation without relying on a static marketplace price that may not reflect the required quantity or manufacturing condition.
Is MC145483DT in stock and suitable for a new design?
The MC145483DT appears in current distributor listings, but a listing alone does not guarantee production availability or allocation. Use the Request a Quote form to confirm stock, lead time, and sourcing conditions. Because the device is categorized as obsolete for this catalog entry, engineers should assess obsolescence risk and consider a modern voice codec when starting a new long-life design.
What is the best NXP Semiconductors equivalent for MC145483DT?
The closest verified NXP-family equivalent is the MC145483 itself, but it is not automatically a drop-in replacement because the family includes several physical packages. MC145483DT is specifically a 20-pin TSSOP option. Select an alternative only after confirming that the candidate has the same 20-pin footprint, pin functions, 13-bit conversion resolution, 2.7V to 5.5V supply range, and compatible synchronous PCM interface.

Dữ liệu tham khảo kỹ thuật cho MC145483DT — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the MC145483DT when an existing design requires a 13-bit voice-band PCM codec-filter with one ADC, one DAC, synchronous operation, and a 20-pin TSSOP footprint. Its integrated voice digitization, reconstruction, band limiting, and smoothing functions make it appropriate for legacy telephony, voice communication, and speech-processing equipment. The Rochester Electronics MC145483DT is the documented drop-in sourcing option because it retains the exact MPN and package identity. Do not substitute the SOG, SSOP, or QFN members of the broader MC145483 family without redesigning the PCB and confirming the pinout. For a new design with multimedia audio, additional channels, higher resolution, or a modern digital interface, evaluate a current audio codec instead of committing to this obsolete catalog device.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này MC145483DT
Manufacturer NXP Semiconductors Rochester Electronics
Package 20-pin TSSOP 20-pin TSSOP
Device Type 13-bit linear PCM codec-filter 13-bit linear PCM codec-filter
ADC Resolution 13 bit 13 bit
DAC Resolution 13 bit 13 bit
Number of ADCs 1 1
Number of DACs 1 1
Recommended Supply Voltage 2.7V to 5.5V 2.7V to 5.5V
Data Format 2s-complement PCM 2s-complement PCM

Bảo phân biệt quan trọng

  • Identical voice-conversion configuration (vsMC145483DT from Rochester Electronics)
  • Matching digital audio format (vsMC145483DT from Rochester Electronics)
  • Same recommended operating range (vsMC145483DT from Rochester Electronics)

Ghi chú thiết kế

Route the MC145483DT analog input and output paths directly to their associated pins, and place the manufacturer-recommended bypass capacitors close to the supply and ground pins. Keep digital clock and data traces away from the analog signal traces. Because the part uses a 20-pin TSSOP footprint, preserve the documented pin numbering and provide adequate copper around the leads for reliable soldering and thermal performance.

Use the manufacturer datasheet's clocking, framing, and synchronization requirements without alteration. The MC145483DT supports synchronous operation, so the host clock, data strobes, and enable signals must have clean transitions and adequate setup and hold margins. Analyze the complete path from the voice source or playback destination, including source impedance, return paths, and any external filtering, rather than treating the codec as an isolated converter.

Do not treat other MC145483 package options as drop-in replacements. The family includes 20-pin SOG, SSOP, and TSSOP versions plus a 32-pin QFN version, but only an identical TSSOP footprint and pin arrangement can replace the MC145483DT without PCB changes. Also avoid designing new 2.3V operation around the reduced-performance statement; use the recommended 2.7V to 5.5V range unless the complete electrical performance has been validated.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

Compliance attributes were not identified in the manufacturer datasheet listing or distributor records for MC145483DT.

Dữ liệu được xác minh vào: 2026-11-16 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

MC145483DT datasheet MC145483DT pinout MC145483DT datasheet pdf MC145483DT schematic MC145483DT equivalent MC145483DT replacement MC145483DT cross reference MC145483DT vs MC145483 MC145483DT TSSOP footprint MC145483DT 13 bit PCM codec MC145483DT price MC145483DT stock NXP MC145483DT MC145483DT voice interface

Các bộ phận và thuật ngữ liên quan

NXP Semiconductors MC145483DT MC145483 PCM codec-filter audio codec voice codec linear PCM 2s-complement data format ADC DAC 13-bit resolution synchronous operation voice digitization voice reconstruction band limiting signal smoothing 20-pin TSSOP TSSOP package family surface-mount package 3.3V supply 5V supply digital telephony speech processing industrial voice interface
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ