Microchip Technology

MCP6043-E/SN - 1.6V RRO Op Amp | Microchip Technology

MPN: MCP6043-E/SN ✓ সক্রিয়
1.6 V Vdss Less than 1 µA maximum per amplifier Id 8-lead SOIC Package Low frequency Speed
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MCP6043-E/SN সারাংশ

The Microchip Technology MCP6043-E/SN is a single-amplifier, rail-to-rail operational amplifier with a 1.6 V minimum supply, approximately 14 kHz gain-bandwidth product, and low-power operation for battery-powered systems. It is packaged in an 8-lead SOIC and is intended for low-frequency sensing, signal conditioning, portable instrumentation, and general-purpose analog control.

An operational amplifier is a high-gain, differential-input analog building block used to amplify weak sensor signals, buffer inputs, perform active filtering, and drive control stages. The MCP6043 belongs to the operational-amplifier hierarchy within analog and power-management semiconductors. Its rail-to-rail input and output behavior allows useful signal operation near the positive and negative supply limits, while its low-voltage capability supports compact battery-powered equipment.

The device operates from a single supply as low as 1.6 V. According to the manufacturer datasheet, its gain-bandwidth product is approximately 14 kHz, making it appropriate for low-frequency rather than high-speed signal paths. The amplifier also draws less than 1 µA maximum quiescent current per amplifier, as stated for the MCP6041/MCP6042/MCP6043/MCP6044 family, helping reduce standby consumption in portable and wearable products.

The MCP6043-E/SN combines rail-to-rail input and output stages with a general-purpose single-amplifier configuration. Its approximately 14 kHz bandwidth is adequate for resistive sensor bridges, temperature sensing, slow current monitoring, and low-frequency filter networks. Because the device is unity-gain stable, it can also be used in conventional non-inverting and inverting amplifier topologies without an external compensation network.

Typical applications include industrial process-control interfaces, low-power battery-operated instruments, portable measurement equipment, wearable accessories, buffered sensor inputs, and low-frequency active filters. The SOIC-8 package is also convenient for prototypes and mixed-signal boards where through-hole-style assembly, inspection, and hand rework are useful.

When designing around the MCP6043-E/SN, check input common-mode range, output swing, capacitive-load stability, noise, and gain-bandwidth interaction under the actual supply voltage. Place bypass capacitors close to the supply pins, keep feedback routes short, and use resistive isolation when driving capacitive loads. The low bandwidth is beneficial for noise control but unsuitable for high-speed acquisition or waveform reproduction.

This product record combines the manufacturer specifications with package details, application guidance, verified drop-in comparisons, PCB implementation notes, and a parameter-by-parameter selection framework. It helps engineers determine whether the MCP6043-E/SN provides sufficient speed, power efficiency, voltage range, and package compatibility before beginning a board-level design.

এর জন্য ড্রপ-ইন বিকল্প MCP6043-E/SN — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible MCP6043-E/SN (একই form factor এবং footprint) — পার্থক্য রয়েছে Gain-Bandwidth Product, Quiescent Current.

Microchip Technology
Gain-Bandwidth Product: 10 kHz
Quiescent Current: Less than 1.0 uA per amplifier

MCP6043-I/SN

✅ ড্রপ-ইন
Microchip Technology
📦 8-lead SOIC
Single operational amplifier · 1 channel · Yes · Yes · 1.4 V · 1.6 V · Less than 1.0 uA per amplifier · 10 kHz

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MCP6043-E/CH

✅ ড্রপ-ইন
📦 8-lead SOIC
Orderable package suffix changes from SN to CH; electrical function remains in the MCP6043 family, subject to package-drawing and temperature-limit verification

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MCP6043-E/SN সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type Single operational amplifier
Manufacturer Microchip Technology
Minimum Supply Voltage 1.6 V
Gain-Bandwidth Product Approximately 14 kHz
কুইসেন্ট কারেন্ট Less than 1 µA maximum per amplifier
Input Topology Rail-to-rail
Output Topology Rail-to-rail
Number of Amplifiers 1
Unity-Gain Stability Stable
প্যাকেজ 8-lead SOIC
Package Width 3.90 mm
মাউন্টিং টাইপ Surface mount
Typical Signal Frequency Low frequency
GBW Approximately 14 kHz

MCP6043-E/SN পিন কনফিগারেশন

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
পিন 1 NC — Not connected
পিন 2 VIN- — Inverting input
পিন 3 VIN+ — Non-inverting input
পিন 4 V- — Negative supply or ground for a single-supply configuration
পিন 5 NC — Not connected
পিন 6 VOUT — Analog output
পিন 7 V+ — Positive supply input
পিন 8 NC — Not connected

সাধারণ ব্যবহার

MCP6043-E/SN এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Battery-Powered Sensor Conditioning, Industrial Process-Control Interface, Portable Measurement Equipment, Wearable Health and Comfort Sensor, Low-Frequency Active Filter, Audio and Communication Interface Buffering.

🔋

Battery-Powered Sensor Conditioning

The MCP6043-E/SN fits low-power sensor interfaces because it operates from a single 1.6 V supply and the MCP6041/MCP6042/MCP6043/MCP6044 family specifies less than 1 µA maximum quiescent current per amplifier. Place the amplifier between a resistive sensor bridge and an ADC input, using the rail-to-rail input stage for signals near either supply rail. Its approximately 14 kHz gain-bandwidth product is sufficient for temperature, pressure, and position sensors that change slowly. The principal trade-off is bandwidth: applications requiring rapid transients or video-rate signals need a faster amplifier. Check the entire signal chain for sensor current, leakage, ADC acquisition time, and the amplifier’s output-swing limits under the actual battery voltage.

🏭

Industrial Process-Control Interface

The MCP6043-E/SN is appropriate for low-frequency industrial process-control inputs where the sensor produces a small differential voltage and the controller requires amplification close to the measurement source. Its rail-to-rail input and output characteristics provide useful signal range in compact single-supply systems, while unity-gain stability permits direct use in non-inverting and inverting configurations. The approximately 14 kHz gain-bandwidth product supports slow pressure, level, and flow measurements rather than fast closed-loop dynamics. Place the device close to the field input to limit interference pickup, and verify the guaranteed operating-temperature grade for the installation environment. Input protection, grounding, output isolation, and filtering must be added where field wiring exposes the amplifier to transients or common-mode voltage.

🧰

Portable Measurement Equipment

The MCP6043-E/SN supports portable instruments that combine a low-voltage sensor, analog conditioning, and an ADC or display. Its 1.6 V minimum supply allows operation from compact energy-storage cells, and the family’s sub-1 µA maximum quiescent-current specification helps preserve standby life. The amplifier can buffer a high-impedance source, amplify a bridge signal, or implement an active low-pass filter before digitization. Its approximately 14 kHz bandwidth is well matched to slow physiological, environmental, and laboratory measurements, but it is not intended for waveform capture above the audio or low-frequency boundary. Select external resistor and capacitor values for the required noise, gain, and bandwidth, and confirm that the display or ADC input does not exceed the available output-voltage swing.

🩺

Wearable Health and Comfort Sensor

The MCP6043-E/SN can condition low-frequency signals from wearable devices that monitor movement, temperature, respiration trends, or skin-contact sensors. Its rail-to-rail operation is valuable when the usable signal range is close to the low single-supply rail, and its low quiescent current is advantageous in designs that spend most of their time in standby. The approximately 14 kHz bandwidth avoids unnecessary signal bandwidth for slow physiological trends. Place the amplifier near the sensor connector, keep high-impedance input routes short, and use guarding or shielding if moisture or nearby switching circuitry raises noise. Validate skin-contact safety, electrode biasing, ESD protection, and the complete battery current budget before production use.

🎛️

Low-Frequency Active Filter

The MCP6043-E/SN is suitable for first-order and low-Q active filters because it is unity-gain stable and provides approximately 14 kHz gain-bandwidth product for low-frequency networks. It can implement buffering, Sallen-Key sections, and inverting filters for audio, control, or measurement paths. Select resistor and capacitor values so the closed-loop gain at each filter corner remains compatible with the amplifier’s gain-bandwidth response. Place the feedback components close to the amplifier, maintain symmetrical resistance values where practical, and keep high-impedance nodes short to reduce leakage and noise pickup. Because the device is intended for low-frequency operation, do not use it as a wideband filter or line driver without additional bandwidth verification.

🎧

Audio and Communication Interface Buffering

The MCP6043-E/SN can buffer low-level audio or communication-interface signals when the required bandwidth remains low. Unity-gain stability makes it convenient for impedance conversion, and the rail-to-rail output can support small-signal stages operating near the supply limits. The approximately 14 kHz bandwidth covers many control-band and low-frequency audio functions but does not provide the slew rate or wideband performance expected from a line-level audio amplifier. For microphone or line inputs, verify input-noise contribution, output swing into the next stage, and stability with the cable or codec capacitance. A small isolation resistor at the output is appropriate when the load is capacitive, followed by an oscilloscope check for peaking or ringing.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

MCP6041 Single-amplifier family member for low-voltage signal conditioning ব্যবহৃত হয়: Battery-Powered Sensor Conditioning, Wearable Health and Comfort Sensor, Audio and Communication Interface Buffering MCP6042 Dual-amplifier family member for dual-channel sensing ব্যবহৃত হয়: Battery-Powered Sensor Conditioning, Portable Measurement Equipment, Wearable Health and Comfort Sensor, Low-Frequency Active Filter, Audio and Communication Interface Buffering MCP6044 Quad-amplifier family member for multi-channel process measurement ব্যবহৃত হয়: Industrial Process-Control Interface, Portable Measurement Equipment, Low-Frequency Active Filter MCP6043 Base MCP6043 family device ব্যবহৃত হয়: Industrial Process-Control Interface
What is the operating voltage of MCP6043-E/SN?
The MCP6043-E/SN operates from a single supply as low as 1.6 V. According to the Microchip Technology MCP6041/MCP6042/MCP6043/MCP6044 family datasheet, the low supply limit supports battery-powered and portable equipment. The maximum supply voltage, exact operating temperature range, and detailed operating limits should be confirmed from the electrical-characteristics table before finalizing a design.
What are the key specifications of MCP6043-E/SN that engineers should know?
The MCP6043-E/SN is a single, unity-gain-stable operational amplifier with a 1.6 V minimum supply, approximately 14 kHz gain-bandwidth product, and rail-to-rail input and output stages. It comes in an 8-lead SOIC. According to the Microchip Technology family datasheet, maximum quiescent current is less than 1 µA per amplifier, making it appropriate for portable sensing and low-frequency signal-conditioning circuits.
Is MCP6043-E/SN the same as MCP6043T-E/SN?
The MCP6043T-E/SN and MCP6043-E/SN belong to the same MCP6043 electrical family, but the T designation identifies a tape-and-reel orderable configuration while the target is supplied as MCP6043-E/SN. Their amplifier characteristics and SOIC-8 footprint are the same. For PCB assembly, select the orderable suffix that matches the required manufacturing and packaging process.
What is the best drop-in replacement for MCP6043-E/SN?
No distinct cross-brand drop-in replacement is established by the available cross-reference information. The closest documented same-family choices are MCP6043-I/SN and MCP6043-E/CH, both using the SOIC-8 format, although temperature grade and orderable suffix must be checked before substitution. Use the manufacturer cross-reference search and compare the complete electrical limits before approving a replacement.
MCP6043-E/SN vs MCP6043-I/SN — which is better for industrial control?
Choose MCP6043-I/SN when its specified temperature grade better matches the industrial application, and choose MCP6043-E/SN when the extended-temperature ordering option is required. Both provide the same basic single-amplifier architecture in an 8-lead SOIC, but their temperature-grade markings differ. The decisive comparison is the guaranteed operating-temperature range and the qualification requirements of the finished equipment.
When should I choose MCP6043-E/SN over MCP6043-E/CH?
Choose MCP6043-E/SN when the SN orderable suffix corresponds to the PCB footprint and procurement requirements of the design. Choose MCP6043-E/CH only after confirming that its package drawing, pinout, and lead geometry match the existing board. The manufacturer offers the MCP6043 in several package families, so package terminology alone is not enough to establish interchangeability.
Where can I download the MCP6043 datasheet PDF?
The MCP6043 family datasheet can be downloaded from the Microchip PDF link listed on this page. The document covers the MCP6041, MCP6042, MCP6043, and MCP6044 amplifiers, including the 1.6 V low-supply operation, sub-1 µA maximum quiescent-current family specification, rail-to-rail behavior, and package variants. Use its pin-description table when assigning SOIC-8 connections.
Where can I find the MCP6043-E/SN pinout?
The MCP6043-E/SN pinout is shown in the pin-description section of the Microchip Technology family datasheet. In the standard 8-lead SOIC configuration, pins 2 and 3 are the inverting and non-inverting inputs, pin 6 is the output, pin 7 is the positive supply, and pin 4 is the negative supply or ground. Pins 1, 5, and 8 are no-connect positions.
Where can I buy MCP6043-E/SN online?
Use the Request a Quote form on this page to request MCP6043-E/SN availability, current commercial terms, and lead time for the required quantity. The form is the appropriate route for a quote and order discussion without relying on a static price. Specify the SOIC-8 package, target quantity, and whether reel packaging or another orderable configuration is required.
What is the price of MCP6043-E/SN?
The current commercial price for MCP6043-E/SN should be requested through the Request a Quote form on this page. Pricing can depend on quantity, orderable suffix, packaging, and supply status, so submit the required quantity and target package configuration for an accurate response. The structured pricing area updates independently of the technical product description.
What is the lead time for MCP6043-E/SN?
Request the current MCP6043-E/SN lead time through the Request a Quote form on this page. Lead time may vary with order quantity, package configuration, and current factory and distribution conditions. Include your required delivery date and annual usage so the commercial response can reflect the actual production requirement rather than a generic availability statement.
Is MCP6043-E/SN in stock?
The current MCP6043-E/SN stock position should be confirmed through the Request a Quote form on this page. Provide the quantity, SOIC-8 configuration, and any required reel or tube packaging details. Inventory can change rapidly, so a quote response tied to the requested configuration is more useful than treating a general distributor availability statement as a firm allocation.
Is MCP6043-E/SN suitable for battery-powered sensors?
The MCP6043-E/SN is suitable for many battery-powered sensor interfaces because it operates from a single supply as low as 1.6 V and the family specification states less than 1 µA maximum quiescent current per amplifier. Its approximately 14 kHz bandwidth is appropriate for slow sensor signals. Evaluate sensor current, output load, leakage, and the system’s active duty cycle because the amplifier is not active continuously.
Can MCP6043-E/SN drive a capacitive load?
The MCP6043-E/SN can drive practical capacitive loads, but stability depends on the capacitance, output current, supply voltage, and loop gain. Start with a small isolated resistor at the output and increase capacitance only after measuring the step response. The available search results do not state the manufacturer’s capacitive-load limit, so use the datasheet guidance and application circuit for the selected gain configuration.
What is the best Microchip equivalent for MCP6043-E/SN?
MCP6043-I/SN is the closest documented same-package family alternative because it retains the MCP6043 single-amplifier design in an 8-lead SOIC and changes the temperature-grade ordering code. The manufacturer also offers MCP6043 in other package families, including MSOP, but those are not footprint-compatible with MCP6043-E/SN. Compare temperature range and electrical limits before treating MCP6043-I/SN as a functional replacement.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MCP6043-E/SN — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose MCP6043-E/SN for compact, single-supply signal-conditioning designs that require a 1.6 V minimum operating voltage, less than 1 µA maximum quiescent current, rail-to-rail input and output behavior, and an 8-lead SOIC footprint. Its approximately 14 kHz bandwidth suits slow sensors, portable instruments, industrial process inputs, and low-frequency filters rather than high-speed signal chains. MCP6043-I/SN is the practical same-package family choice when its temperature-grade limits satisfy the installation requirements and the E-grade code is not mandatory. MCP6043-E/CH may fit when its orderable package configuration matches the PCB and purchasing plan, but the package drawing should be checked before substitution. No cross-brand drop-in candidate is established by the available cross-reference information. Final selection therefore depends on package drawing, guaranteed temperature range, supply limits, output loading, and the required noise and bandwidth performance.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য MCP6043-I/SN MCP6043-E/CH
Package 8-lead SOIC 8-lead SOIC 8-lead SOIC
Brand Microchip Technology Microchip Technology Microchip Technology
Amplifier Count 1 1 1
Minimum Supply Voltage 1.6 V 1.6 V 1.6 V
Gain-Bandwidth Product Approximately 14 kHz Approximately 14 kHz Approximately 14 kHz
Maximum Quiescent Current Less than 1 µA per amplifier Less than 1 µA per amplifier Less than 1 µA per amplifier
Input Common-Mode Behavior Rail-to-rail Rail-to-rail Rail-to-rail
Output Swing Behavior Rail-to-rail Rail-to-rail Rail-to-rail
Unity-Gain Stability Stable Stable Stable
Primary Ordering Difference E temperature-grade code with SN suffix I temperature-grade code with SN suffix E temperature-grade code with CH suffix

মূল পার্থক্যসমূহ

  • Very low quiescent current for portable analog conditioning (বনামMCP6043-I/SN)
  • Single 1.6 V-compatible amplifier in an 8-lead SOIC (বনামMCP6043-E/CH)
  • Low-frequency performance matched to slow sensing and control loops (বনামMCP6043-I/SN)

ডিজাইন নোট

Connect the positive supply to pin 7 and the negative supply or ground to pin 4. Place a local bypass capacitor close to each supply pin and provide its return directly to the ground plane. Because the family specification permits less than 1 µA maximum quiescent current, capacitor leakage can materially affect a standby power budget; use a low-leakage dielectric when operating near the device’s current limit. Do not rely on the amplifier quiescent current as the entire system standby figure because sensor biasing, protection leakage, and load current also contribute.

Keep the inverting-input and feedback components close to pins 2 and 6, and minimize the distance from the non-inverting input at pin 3 to the source. Avoid routing sensitive input signals beside the supply pins, clock lines, or switching-node traces. For high-impedance sensors, use a grounded guard where practical and keep the board surface under the input path free of solder flux and contamination. These layout practices reduce leakage, induced hum, and pickup that could otherwise dominate a low-frequency measurement.

Do not interpret rail-to-rail as an unlimited output range; the output must remain inside the supply rails under the specified load. Similarly, the 1.6 V supply limit does not guarantee identical performance at every lower operating voltage. Review the electrical-characteristics curves for common-mode range, output swing, gain error, and supply-current behavior at the actual rail voltage. Avoid using the MCP6043-E/SN for high-speed signals because its approximately 14 kHz gain-bandwidth product is intended for low-frequency applications.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

Compliance declarations for this exact orderable part were not identified. Confirm the current material and environmental declarations with the manufacturer before production release.

ডেটা যাচাই করা হয়েছে: 2026-11-20 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

mcp604 datasheet MCP6043-E/SN datasheet MCP6043 datasheet PDF MCP6043-E/SN pinout MCP6043-E/SN SOIC-8 MCP6043-E/SN equivalent MCP6043-E/SN replacement MCP6043-E/SN vs MCP6043-I/SN MCP6043-E/SN price MCP6043-E/SN stock Microchip MCP6043-E/SN MCP6043 1.6V op amp MCP6043 rail-to-rail amplifier MCP6043 battery powered sensor

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Microchip Technology MCP6043-E/SN MCP6043 MCP6043-I/SN MCP6043-E/CH MCP6041 MCP6042 MCP6044 operational amplifier op amp analog IC rail-to-rail input rail-to-rail output unity-gain stable 1.6 V minimum supply approximately 14 kHz gain-bandwidth product less than 1 µA quiescent current 8-lead SOIC SOIC family surface-mount package battery-powered sensor conditioning industrial process control portable measurement equipment wearable sensor interface
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন