MK20DN64VLH5 - 50MHz Cortex-M4 64KB USB MCU | NXP
MPN: MK20DN64VLH5 ✓ সক্রিয়MK20DN64VLH5 সারাংশ
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one device. The Kinetis K20 belongs to the ARM Cortex-M4 microcontroller family and combines a 32-bit ARM architecture with real-time peripherals. Its place in the product hierarchy is microcontroller, embedded processor, embedded semiconductor, and programmable control device. The MK20DN64VLH5 combines that general-purpose processing role with USB, flash, SRAM, and industrial-oriented interface resources.
The principal device characteristics include a 50 MHz Cortex-M4 core, 64 KB flash, 16 KB SRAM, and operation from 1.8 V, 2.5 V, or 3.3 V supplies. USB connectivity allows the MCU to serve as a peripheral, host, or device in connected equipment. The 64-LQFP package exposes substantially more I/O than smaller MCU packages, making the device suitable for designs that need multiple timers, communications peripherals, analog inputs, or digital control lines.
At its 50 MHz maximum operating frequency, the Cortex-M4 processor uses the ARM Thumb instruction set and provides efficient 32-bit processing for control loops, communication protocols, and supervisory logic. The combination of 64 KB flash and 16 KB SRAM provides space for an embedded application, boot code, configuration data, and working buffers. Its integrated USB interface is particularly useful when a compact controller must exchange data with a host while also handling local sensing and real-time actuation.
Typical applications include industrial motor controllers, USB-to-serial or USB data-acquisition equipment, programmable automation controllers, connected test systems, and embedded instruments. Its 64-pin LQFP footprint provides a practical route to implementing a conventional multilayer PCB without relying on a very fine-pitch ball-grid array. Existing Kinetis K20 software, tooling, and peripheral configurations can help streamline development, although board-level design must still verify every signal, supply requirement, and multiplexing option.
When designing around the MK20DN64VLH5, begin with the manufacturer's pin-description and multiplexing tables, then reserve clean input and output filtering for sensitive analog channels. Place decoupling capacitors near the supply pins and route USB differential traces as a controlled-impedance pair on a continuous reference plane. Confirm the selected flash programming method, clock configuration, and peripheral assignments before releasing the PCB layout.
This product page combines the manufacturer identity, core memory capacity, operating frequency, package details, replacement comparisons, and application-focused design guidance in one engineering reference. It also organizes the sourcing questions engineers commonly need to answer when evaluating an ARM Cortex-M4 USB microcontroller for a new embedded platform.
এর জন্য ড্রপ-ইন বিকল্প MK20DN64VLH5 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible MK20DN64VLH5 (একই form factor এবং footprint) — পার্থক্য রয়েছে Architecture, Package, Product Type, USB Connectivity.
MK20DX64VLH5
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →MK10DX64VLH5
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MK20DN64VLH5 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Manufacturer | NXP Semiconductors |
| Processor Core | ARM Cortex-M4 |
| Maximum CPU Frequency | 50 MHz |
| Flash Memory | 64 KB (64K x 8) |
| SRAM | 16 KB |
| Architecture | 32-bit ARM RISC |
| USB Connectivity | Yes |
| Supply Voltage Options | 1.8 V, 2.5 V, or 3.3 V |
| পিন সংখ্যা | 64 pins |
| প্যাকেজ | 64-LQFP, 10 mm x 10 mm |
| মাউন্টিং টাইপ | Surface mount |
| Product Series | Kinetis K20 |
| Core Configuration | Single core |
MK20DN64VLH5 64-lqfp, 10 mm x 10 mm পিন কনফিগারেশন গাইড
MK20DN64VLH5 (64-lqfp, 10 mm x 10 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MK20DN64VLH5.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
MK20DN64VLH5 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Precision Motor Controller, USB Data-Acquisition Unit, Industrial Automation Controller, USB Communication Bridge, Programmable Test Instrument, Embedded Sensor Hub.
Precision Motor Controller
The MK20DN64VLH5 fits precision motor-control systems that require deterministic 32-bit processing at up to 50 MHz and enough memory for a real-time control loop. Its 64-pin LQFP package provides access to timer, PWM, encoder, communication, and general-purpose I/O resources. The 16 KB SRAM can hold motion parameters and control state, while 64 KB flash stores the main control firmware. USB connectivity can also support configuration transfer or service diagnostics. Final PWM frequency, timer channels, encoder interfaces, and analog feedback paths must be confirmed in the NXP pin and peripheral tables.
সুপারিশকৃত
USB Data-Acquisition Unit
The MK20DN64VLH5 is appropriate for a compact USB data-acquisition unit because it integrates USB connectivity with a 50 MHz Cortex-M4 processor. Firmware can acquire sensor data, perform filtering or calibration, and transfer results over USB without a separate interface controller. The 64 KB flash provides space for protocol and signal-processing code, while 16 KB SRAM supports buffers and working variables. The 64-LQFP package also exposes more peripheral options than a smaller controller, although the designer should verify USB clocking, transceiver enable control, analog-channel capabilities, and connector routing requirements.
সুপারিশকৃত
Industrial Automation Controller
The MK20DN64VLH5 can serve as the central controller in an industrial automation module where a 50 MHz ARM Cortex-M4 core provides adequate control-loop and communication performance. Its 64-pin LQFP interface supports digital I/O, timers, serial communication, and analog supervision functions, while USB can provide an engineering interface for configuration or diagnostics. The 16 KB SRAM is suitable for working buffers and a real-time task schedule. Industrial deployment still requires attention to supply regulation, isolation requirements, surge protection, environmental margins, and the operating-temperature limits specified by NXP.
সুপারিশকৃত
USB Communication Bridge
The MK20DN64VLH5 is well suited to a USB communication bridge because USB connectivity is integrated with a 50 MHz Cortex-M4 processor, 64 KB flash, and 16 KB SRAM. Firmware can translate between USB and a UART, SPI, or other peripheral interface, add protocol framing, or buffer data between systems. The 64-LQFP package provides enough pins for multiple interfaces and control signals. A production implementation must route D+ and D- as a controlled-impedance differential pair, apply the required USB series resistance, include ESD protection at the connector, and validate enumeration behavior.
সুপারিশকৃত
Programmable Test Instrument
The MK20DN64VLH5 can support a programmable test instrument that combines signal generation, sequencing, measurement, and USB-based host control. Its 50 MHz Cortex-M4 core provides computational capacity for waveform tables, timing sequences, and data conditioning, while 64 KB flash and 16 KB SRAM accommodate embedded firmware and working buffers. The 64-pin package makes it practical to connect multiple timers, communication channels, and status signals. Measurement accuracy will depend on the selected analog peripherals, external signal-conditioning circuitry, reference design, calibration method, and layout rather than on the core frequency alone.
সুপারিশকৃত
Embedded Sensor Hub
The MK20DN64VLH5 fits an embedded sensor hub that gathers readings from local sensors and forwards processed information over USB. The 50 MHz ARM Cortex-M4 core can execute filtering, compensation, threshold logic, and data-packet preparation, while the 16 KB SRAM provides room for sample buffers and configuration state. Its 64-pin LQFP package exposes additional GPIO, timer, and communication options for sensors that cannot share a bus. The implementation should verify analog input ranges, ADC characteristics, sensor interfaces, power requirements, and calibration storage according to the NXP manufacturer datasheet.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MK20DN64VLH5 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | MK20DX64VLH5 | MK10DX64VLH5 |
|---|---|---|---|
| Package | 64-LQFP (10x10) | 64-LQFP (10x10) | 64-LQFP (10x10) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Processor Core | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 |
| Maximum CPU Frequency | 50 MHz | 50 MHz | 50 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB |
| Product Family | Kinetis K20 | Kinetis K20 | Kinetis K10 |
মূল পার্থক্যসমূহ
- Closest documented K20-family replacement (বনামMK20DX64VLH5)
- K20-family feature set (বনামMK10DX64VLH5)
- USB-enabled embedded control platform (বনামMK10DX64VLH5)
ডিজাইন নোট
Place the required supply bypass capacitors immediately adjacent to the corresponding power and ground pins, using the manufacturer pinout and recommended layout. Keep USB D+ and D- traces short, matched, and routed over a continuous ground plane, with the NXP-recommended series damping near the appropriate device or connector location. Avoid routing high-current switching edges beneath the differential pair.
Confirm the exact core and I/O voltage domains from the NXP manufacturer datasheet before selecting regulators or level shifters. The device supports 1.8 V, 2.5 V, and 3.3 V operation, but mixed-voltage designs must satisfy each pin's input limits and power-up constraints. Include local decoupling at every supply entry and verify startup behavior across the complete temperature range used by the product.
For USB operation, treat D+ and D- as a controlled-impedance differential pair rather than independent digital nets. Use the manufacturer's reference layout, maintain continuous reference-plane return paths, apply the specified source termination, and provide connector-side ESD protection. Validate signal integrity with an appropriate USB test setup because branch stubs and layer transitions can degrade eye margins even when the MCU operates at 50 MHz.
Do not assume that an identical 64-LQFP footprint guarantees interchangeability. Review alternate-function mappings, USB enable control, timer resources, analog functions, reset behavior, and boot configuration for the exact ordering code. The MK20DN64VLH5, MK20DX64VLH5, and MK10DX64VLH5 share basic core, memory, frequency, and package characteristics, but their family-specific peripheral configurations can affect board compatibility.
কমপ্লায়েন্স তথ্য
NXP lists MK20DN64VLH5 as active. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements were not identified in the referenced product information and require confirmation from NXP or the current manufacturer documentation.