MK20DN64VLH5 - 50MHz Cortex-M4 64KB USB MCU | NXP
MPN: MK20DN64VLH5 ✓ Hoạt độngMK20DN64VLH5 Tóm tắt
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one device. The Kinetis K20 belongs to the ARM Cortex-M4 microcontroller family and combines a 32-bit ARM architecture with real-time peripherals. Its place in the product hierarchy is microcontroller, embedded processor, embedded semiconductor, and programmable control device. The MK20DN64VLH5 combines that general-purpose processing role with USB, flash, SRAM, and industrial-oriented interface resources.
The principal device characteristics include a 50 MHz Cortex-M4 core, 64 KB flash, 16 KB SRAM, and operation from 1.8 V, 2.5 V, or 3.3 V supplies. USB connectivity allows the MCU to serve as a peripheral, host, or device in connected equipment. The 64-LQFP package exposes substantially more I/O than smaller MCU packages, making the device suitable for designs that need multiple timers, communications peripherals, analog inputs, or digital control lines.
At its 50 MHz maximum operating frequency, the Cortex-M4 processor uses the ARM Thumb instruction set and provides efficient 32-bit processing for control loops, communication protocols, and supervisory logic. The combination of 64 KB flash and 16 KB SRAM provides space for an embedded application, boot code, configuration data, and working buffers. Its integrated USB interface is particularly useful when a compact controller must exchange data with a host while also handling local sensing and real-time actuation.
Typical applications include industrial motor controllers, USB-to-serial or USB data-acquisition equipment, programmable automation controllers, connected test systems, and embedded instruments. Its 64-pin LQFP footprint provides a practical route to implementing a conventional multilayer PCB without relying on a very fine-pitch ball-grid array. Existing Kinetis K20 software, tooling, and peripheral configurations can help streamline development, although board-level design must still verify every signal, supply requirement, and multiplexing option.
When designing around the MK20DN64VLH5, begin with the manufacturer's pin-description and multiplexing tables, then reserve clean input and output filtering for sensitive analog channels. Place decoupling capacitors near the supply pins and route USB differential traces as a controlled-impedance pair on a continuous reference plane. Confirm the selected flash programming method, clock configuration, and peripheral assignments before releasing the PCB layout.
This product page combines the manufacturer identity, core memory capacity, operating frequency, package details, replacement comparisons, and application-focused design guidance in one engineering reference. It also organizes the sourcing questions engineers commonly need to answer when evaluating an ARM Cortex-M4 USB microcontroller for a new embedded platform.
Bộ thay thế dễ dàng lắp đặt cho MK20DN64VLH5 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MK20DN64VLH5 (cùng hình factor và footprint) — khác nhau ở Architecture, Package, Product Type, USB Connectivity.
MK20DX64VLH5
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MK10DX64VLH5
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MK20DN64VLH5 Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Manufacturer | NXP Semiconductors |
| Processor Core | ARM Cortex-M4 |
| Maximum CPU Frequency | 50 MHz |
| Flash Memory | 64 KB (64K x 8) |
| SRAM | 16 KB |
| Architecture | 32-bit ARM RISC |
| USB Connectivity | Yes |
| Supply Voltage Options | 1.8 V, 2.5 V, or 3.3 V |
| Số chân | 64 pins |
| Hộp | 64-LQFP, 10 mm x 10 mm |
| Kiểu lắp đặt | Surface mount |
| Product Series | Kinetis K20 |
| Core Configuration | Single core |
Hướng dẫn cấu hình chân MK20DN64VLH5 64-lqfp, 10 mm x 10 mm
Cấu hình chân cho MK20DN64VLH5 (64-lqfp, 10 mm x 10 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho MK20DN64VLH5.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MK20DN64VLH5 phù hợp cho 6 Áp dụngs: Precision Motor Controller, USB Data-Acquisition Unit, Industrial Automation Controller, USB Communication Bridge, Programmable Test Instrument, Embedded Sensor Hub.
Precision Motor Controller
The MK20DN64VLH5 fits precision motor-control systems that require deterministic 32-bit processing at up to 50 MHz and enough memory for a real-time control loop. Its 64-pin LQFP package provides access to timer, PWM, encoder, communication, and general-purpose I/O resources. The 16 KB SRAM can hold motion parameters and control state, while 64 KB flash stores the main control firmware. USB connectivity can also support configuration transfer or service diagnostics. Final PWM frequency, timer channels, encoder interfaces, and analog feedback paths must be confirmed in the NXP pin and peripheral tables.
Được đề xuất
USB Data-Acquisition Unit
The MK20DN64VLH5 is appropriate for a compact USB data-acquisition unit because it integrates USB connectivity with a 50 MHz Cortex-M4 processor. Firmware can acquire sensor data, perform filtering or calibration, and transfer results over USB without a separate interface controller. The 64 KB flash provides space for protocol and signal-processing code, while 16 KB SRAM supports buffers and working variables. The 64-LQFP package also exposes more peripheral options than a smaller controller, although the designer should verify USB clocking, transceiver enable control, analog-channel capabilities, and connector routing requirements.
Được đề xuất
Industrial Automation Controller
The MK20DN64VLH5 can serve as the central controller in an industrial automation module where a 50 MHz ARM Cortex-M4 core provides adequate control-loop and communication performance. Its 64-pin LQFP interface supports digital I/O, timers, serial communication, and analog supervision functions, while USB can provide an engineering interface for configuration or diagnostics. The 16 KB SRAM is suitable for working buffers and a real-time task schedule. Industrial deployment still requires attention to supply regulation, isolation requirements, surge protection, environmental margins, and the operating-temperature limits specified by NXP.
Được đề xuất
USB Communication Bridge
The MK20DN64VLH5 is well suited to a USB communication bridge because USB connectivity is integrated with a 50 MHz Cortex-M4 processor, 64 KB flash, and 16 KB SRAM. Firmware can translate between USB and a UART, SPI, or other peripheral interface, add protocol framing, or buffer data between systems. The 64-LQFP package provides enough pins for multiple interfaces and control signals. A production implementation must route D+ and D- as a controlled-impedance differential pair, apply the required USB series resistance, include ESD protection at the connector, and validate enumeration behavior.
Được đề xuất
Programmable Test Instrument
The MK20DN64VLH5 can support a programmable test instrument that combines signal generation, sequencing, measurement, and USB-based host control. Its 50 MHz Cortex-M4 core provides computational capacity for waveform tables, timing sequences, and data conditioning, while 64 KB flash and 16 KB SRAM accommodate embedded firmware and working buffers. The 64-pin package makes it practical to connect multiple timers, communication channels, and status signals. Measurement accuracy will depend on the selected analog peripherals, external signal-conditioning circuitry, reference design, calibration method, and layout rather than on the core frequency alone.
Được đề xuất
Embedded Sensor Hub
The MK20DN64VLH5 fits an embedded sensor hub that gathers readings from local sensors and forwards processed information over USB. The 50 MHz ARM Cortex-M4 core can execute filtering, compensation, threshold logic, and data-packet preparation, while the 16 KB SRAM provides room for sample buffers and configuration state. Its 64-pin LQFP package exposes additional GPIO, timer, and communication options for sensors that cannot share a bus. The implementation should verify analog input ranges, ADC characteristics, sensor interfaces, power requirements, and calibration storage according to the NXP manufacturer datasheet.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MK20DN64VLH5 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MK20DX64VLH5 | MK10DX64VLH5 |
|---|---|---|---|
| Package | 64-LQFP (10x10) | 64-LQFP (10x10) | 64-LQFP (10x10) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Processor Core | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 |
| Maximum CPU Frequency | 50 MHz | 50 MHz | 50 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB |
| Product Family | Kinetis K20 | Kinetis K20 | Kinetis K10 |
Bảo phân biệt quan trọng
- Closest documented K20-family replacement (vsMK20DX64VLH5)
- K20-family feature set (vsMK10DX64VLH5)
- USB-enabled embedded control platform (vsMK10DX64VLH5)
Ghi chú thiết kế
Place the required supply bypass capacitors immediately adjacent to the corresponding power and ground pins, using the manufacturer pinout and recommended layout. Keep USB D+ and D- traces short, matched, and routed over a continuous ground plane, with the NXP-recommended series damping near the appropriate device or connector location. Avoid routing high-current switching edges beneath the differential pair.
Confirm the exact core and I/O voltage domains from the NXP manufacturer datasheet before selecting regulators or level shifters. The device supports 1.8 V, 2.5 V, and 3.3 V operation, but mixed-voltage designs must satisfy each pin's input limits and power-up constraints. Include local decoupling at every supply entry and verify startup behavior across the complete temperature range used by the product.
For USB operation, treat D+ and D- as a controlled-impedance differential pair rather than independent digital nets. Use the manufacturer's reference layout, maintain continuous reference-plane return paths, apply the specified source termination, and provide connector-side ESD protection. Validate signal integrity with an appropriate USB test setup because branch stubs and layer transitions can degrade eye margins even when the MCU operates at 50 MHz.
Do not assume that an identical 64-LQFP footprint guarantees interchangeability. Review alternate-function mappings, USB enable control, timer resources, analog functions, reset behavior, and boot configuration for the exact ordering code. The MK20DN64VLH5, MK20DX64VLH5, and MK10DX64VLH5 share basic core, memory, frequency, and package characteristics, but their family-specific peripheral configurations can affect board compatibility.
Thông tin tuân thủ
NXP lists MK20DN64VLH5 as active. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements were not identified in the referenced product information and require confirmation from NXP or the current manufacturer documentation.