NXP Semiconductors

MK20DN64VLH5 - 50MHz Cortex-M4 64KB USB MCU | NXP

料号: MK20DN64VLH5 ✓ 量产中
1.8 V, 2.5 V, or 3.3 V Vdss 64-LQFP, 10 mm x 10 mm Package 50 MHz Speed 64 KB (64K x 8) Memory
最小起订量: 1 |

MK20DN64VLH5 概述

The NXP Semiconductors MK20DN64VLH5 is a 32-bit ARM Cortex-M4 Kinetis K20 microcontroller operating up to 50 MHz, with 64 KB of flash memory and USB connectivity in a 64-pin LQFP package measuring 10 mm by 10 mm. It is designed for embedded industrial, motor-control, communications, and USB-connected applications that require deterministic real-time performance in a compact surface-mount package.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one device. The Kinetis K20 belongs to the ARM Cortex-M4 microcontroller family and combines a 32-bit ARM architecture with real-time peripherals. Its place in the product hierarchy is microcontroller, embedded processor, embedded semiconductor, and programmable control device. The MK20DN64VLH5 combines that general-purpose processing role with USB, flash, SRAM, and industrial-oriented interface resources.

The principal device characteristics include a 50 MHz Cortex-M4 core, 64 KB flash, 16 KB SRAM, and operation from 1.8 V, 2.5 V, or 3.3 V supplies. USB connectivity allows the MCU to serve as a peripheral, host, or device in connected equipment. The 64-LQFP package exposes substantially more I/O than smaller MCU packages, making the device suitable for designs that need multiple timers, communications peripherals, analog inputs, or digital control lines.

At its 50 MHz maximum operating frequency, the Cortex-M4 processor uses the ARM Thumb instruction set and provides efficient 32-bit processing for control loops, communication protocols, and supervisory logic. The combination of 64 KB flash and 16 KB SRAM provides space for an embedded application, boot code, configuration data, and working buffers. Its integrated USB interface is particularly useful when a compact controller must exchange data with a host while also handling local sensing and real-time actuation.

Typical applications include industrial motor controllers, USB-to-serial or USB data-acquisition equipment, programmable automation controllers, connected test systems, and embedded instruments. Its 64-pin LQFP footprint provides a practical route to implementing a conventional multilayer PCB without relying on a very fine-pitch ball-grid array. Existing Kinetis K20 software, tooling, and peripheral configurations can help streamline development, although board-level design must still verify every signal, supply requirement, and multiplexing option.

When designing around the MK20DN64VLH5, begin with the manufacturer's pin-description and multiplexing tables, then reserve clean input and output filtering for sensitive analog channels. Place decoupling capacitors near the supply pins and route USB differential traces as a controlled-impedance pair on a continuous reference plane. Confirm the selected flash programming method, clock configuration, and peripheral assignments before releasing the PCB layout.

This product page combines the manufacturer identity, core memory capacity, operating frequency, package details, replacement comparisons, and application-focused design guidance in one engineering reference. It also organizes the sourcing questions engineers commonly need to answer when evaluating an ARM Cortex-M4 USB microcontroller for a new embedded platform.

直接替换替代料: MK20DN64VLH5 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: MK20DN64VLH5 (相同外形与封装尺寸) ——差异在于 Architecture, Package, Product Type, USB Connectivity.

NXP Semiconductors
Architecture: 32-bit RISC
Package: 64-LQFP (10 mm x 10 mm)
Product Type: 32-bit microcontroller
对比 MK20DN64VLH5 →

MK20DX64VLH5

✅ 直接替换
NXP Semiconductors
📦 64-LQFP (10x10)
32-bit microcontroller · Kinetis K20 · Arm Cortex-M4 · 50 MHz · 64 KB (64K x 8) · 16 KB · 32-bit RISC · Full-speed USB

联系询价

查看数据手册 →

MK10DX64VLH5

✅ 直接替换
📦 64-LQFP (10x10)
Cortex-M4 at 50 MHz, 64 KB flash, and 64-pin LQFP match; SRAM and integrated peripheral configuration differ by family

📋 参考替代料(不在目录中)

MK20DN64VLH5 最大额定值与电气特性

Product Type 32-bit ARM Cortex-M4 microcontroller
Manufacturer NXP Semiconductors
Processor Core ARM Cortex-M4
Maximum CPU Frequency 50 MHz
Flash Memory 64 KB (64K x 8)
SRAM 16 KB
Architecture 32-bit ARM RISC
USB Connectivity Yes
Supply Voltage Options 1.8 V, 2.5 V, or 3.3 V
引脚数量 64 pins
封装 64-LQFP, 10 mm x 10 mm
安装类型 Surface mount
Product Series Kinetis K20
Core Configuration Single core

MK20DN64VLH5 64-lqfp, 10 mm x 10 mm 引脚配置指南

MK20DN64VLH5(64-lqfp, 10 mm x 10 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

MK20DN64VLH5 的 64-lqfp, 10 mm x 10 mm 封装引脚图

暂无详细引脚数据: MK20DN64VLH5.

请参阅 数据手册 以查看完整引脚配置。

典型应用

MK20DN64VLH5 适用于 6 应用s: Precision Motor Controller, USB Data-Acquisition Unit, Industrial Automation Controller, USB Communication Bridge, Programmable Test Instrument, Embedded Sensor Hub.

🏭

Precision Motor Controller

The MK20DN64VLH5 fits precision motor-control systems that require deterministic 32-bit processing at up to 50 MHz and enough memory for a real-time control loop. Its 64-pin LQFP package provides access to timer, PWM, encoder, communication, and general-purpose I/O resources. The 16 KB SRAM can hold motion parameters and control state, while 64 KB flash stores the main control firmware. USB connectivity can also support configuration transfer or service diagnostics. Final PWM frequency, timer channels, encoder interfaces, and analog feedback paths must be confirmed in the NXP pin and peripheral tables.

🖥️

USB Data-Acquisition Unit

The MK20DN64VLH5 is appropriate for a compact USB data-acquisition unit because it integrates USB connectivity with a 50 MHz Cortex-M4 processor. Firmware can acquire sensor data, perform filtering or calibration, and transfer results over USB without a separate interface controller. The 64 KB flash provides space for protocol and signal-processing code, while 16 KB SRAM supports buffers and working variables. The 64-LQFP package also exposes more peripheral options than a smaller controller, although the designer should verify USB clocking, transceiver enable control, analog-channel capabilities, and connector routing requirements.

⚙️

Industrial Automation Controller

The MK20DN64VLH5 can serve as the central controller in an industrial automation module where a 50 MHz ARM Cortex-M4 core provides adequate control-loop and communication performance. Its 64-pin LQFP interface supports digital I/O, timers, serial communication, and analog supervision functions, while USB can provide an engineering interface for configuration or diagnostics. The 16 KB SRAM is suitable for working buffers and a real-time task schedule. Industrial deployment still requires attention to supply regulation, isolation requirements, surge protection, environmental margins, and the operating-temperature limits specified by NXP.

🌐

USB Communication Bridge

The MK20DN64VLH5 is well suited to a USB communication bridge because USB connectivity is integrated with a 50 MHz Cortex-M4 processor, 64 KB flash, and 16 KB SRAM. Firmware can translate between USB and a UART, SPI, or other peripheral interface, add protocol framing, or buffer data between systems. The 64-LQFP package provides enough pins for multiple interfaces and control signals. A production implementation must route D+ and D- as a controlled-impedance differential pair, apply the required USB series resistance, include ESD protection at the connector, and validate enumeration behavior.

🧪

Programmable Test Instrument

The MK20DN64VLH5 can support a programmable test instrument that combines signal generation, sequencing, measurement, and USB-based host control. Its 50 MHz Cortex-M4 core provides computational capacity for waveform tables, timing sequences, and data conditioning, while 64 KB flash and 16 KB SRAM accommodate embedded firmware and working buffers. The 64-pin package makes it practical to connect multiple timers, communication channels, and status signals. Measurement accuracy will depend on the selected analog peripherals, external signal-conditioning circuitry, reference design, calibration method, and layout rather than on the core frequency alone.

🧩

Embedded Sensor Hub

The MK20DN64VLH5 fits an embedded sensor hub that gathers readings from local sensors and forwards processed information over USB. The 50 MHz ARM Cortex-M4 core can execute filtering, compensation, threshold logic, and data-packet preparation, while the 16 KB SRAM provides room for sample buffers and configuration state. Its 64-pin LQFP package exposes additional GPIO, timer, and communication options for sensors that cannot share a bus. The implementation should verify analog input ranges, ADC characteristics, sensor interfaces, power requirements, and calibration storage according to the NXP manufacturer datasheet.

推荐产品汇总

MK20DX64VLH5 NXP Semiconductors 用于: Precision Motor Controller, USB Data-Acquisition Unit, Industrial Automation Controller, USB Communication Bridge, Programmable Test Instrument, Embedded Sensor Hub MK10DX64VLH5 Cortex-M4 Kinetis control-MCU option 用于: Precision Motor Controller, USB Data-Acquisition Unit, Industrial Automation Controller, USB Communication Bridge, Programmable Test Instrument, Embedded Sensor Hub
What is the MK20DN64VLH5?
The MK20DN64VLH5 is an active NXP Semiconductors 32-bit ARM Cortex-M4 Kinetis K20 microcontroller with a 50 MHz processor, 64 KB flash, 16 KB SRAM, USB connectivity, and a 64-LQFP package. According to the NXP manufacturer product page, it is designed for precision motor control and industrial applications that also require USB connectivity.
What are the key specifications of MK20DN64VLH5?
The MK20DN64VLH5 combines a 32-bit ARM Cortex-M4 processor, 50 MHz maximum operating frequency, 64 KB flash, 16 KB SRAM, and USB connectivity. The NXP manufacturer product information identifies the device as a Kinetis K20 family microcontroller, while the listed package is a 64-pin LQFP measuring 10 mm by 10 mm and operating from 1.8 V, 2.5 V, or 3.3 V.
What is the operating voltage of MK20DN64VLH5?
The MK20DN64VLH5 supports 1.8 V, 2.5 V, and 3.3 V operating supplies. According to the NXP manufacturer datasheet and product listing, these voltage options support low-voltage embedded systems, but the designer should confirm the exact core and I/O supply pins, voltage tolerances, decoupling requirements, and power-up sequence against the device pin-description table.
What is the flash memory capacity of MK20DN64VLH5?
The MK20DN64VLH5 contains 64 KB of flash memory, organized as 64K x 8, together with 16 KB of SRAM. According to the NXP manufacturer product page, this capacity is suitable for compact embedded firmware, communication stacks, configuration data, and control code, while final firmware sizing must include bootloader, application code, and update-retention requirements.
What package does MK20DN64VLH5 use?
The MK20DN64VLH5 uses a 64-LQFP surface-mount package measuring 10 mm by 10 mm. According to the NXP manufacturer datasheet, the package exposes 64 pins and is suitable for conventional multilayer PCB assembly. The footprint, exposed pad requirements if applicable, solder mask, pin-one orientation, and recommended land pattern should be checked in the official package drawing.
Where can I download the MK20DN64VLH5 datasheet PDF?
The MK20DN64VLH5 datasheet and product resources are available from the official NXP product page at https://www.nxp.com/part/MK20DN64VLH5. Select the Data Sheet link to obtain the manufacturer PDF. The document should be used for final pin assignments, memory maps, electrical limits, USB routing, peripheral multiplexing, and PCB layout because distributor summaries do not contain every implementation detail.
Where can I find the MK20DN64VLH5 pinout?
The MK20DN64VLH5 pinout appears in the pin-configuration section of the NXP manufacturer datasheet. Use the official pin-description table to identify power, ground, clock, reset, USB, debug, and general-purpose I/O assignments, including alternate functions and analog-capable pins. The complete 64-pin map is not reproduced on this page, so PCB net assignment should be checked directly against the manufacturer document.
Is the MK20DN64VLH5 suitable for motor control?
The MK20DN64VLH5 is suitable for many precision motor-control and industrial-control designs because it integrates a 50 MHz Cortex-M4 core, 16 KB SRAM, and extensive I/O in a 64-pin package. According to the NXP manufacturer product information, precision motor control is an intended application, although the final design must verify timer channels, PWM outputs, encoder interfaces, analog front ends, and protection requirements.
How does MK20DN64VLH5 compare with MK20DX64VLH5?
The MK20DN64VLH5 and MK20DX64VLH5 are closely related 64-pin Kinetis K20 devices, and both provide an ARM Cortex-M4 core at 50 MHz with 64 KB flash. The NXP ordering-code difference must be checked in the manufacturer comparison because it can identify a different feature or qualification configuration. Both share the same 64-LQFP footprint, but pin-level feature differences require confirmation before interchange.
What is the difference between MK20DN64VLH5 and MK10DX64VLH5?
The MK20DN64VLH5 belongs to the Kinetis K20 family, while the MK10DX64VLH5 belongs to the Kinetis K10 family. Cross-reference information lists both as 32-bit ARM Cortex-M4 devices operating at 50 MHz with 64 KB flash in 64-pin LQFP packages, but their integrated peripherals and feature sets differ. They are not automatically interchangeable without a detailed NXP peripheral and pin-function review.
When should I choose MK20DN64VLH5 over MK20DX64VLH5?
Choose the MK20DN64VLH5 when its NXP ordering code provides the exact USB, peripheral, qualification, or environmental configuration required by the design. The MK20DX64VLH5 is a closely related Kinetis K20 option in the same 64-LQFP format, but naming similarity alone does not guarantee identical behavior. Compare the ordering-information table, enabled peripherals, package markings, and errata before making the final selection.
Is MK20DN64VLH5 suitable for USB data acquisition?
The MK20DN64VLH5 is suitable for compact USB data-acquisition and control products because it combines USB connectivity with a 50 MHz Cortex-M4 processor, 64 KB flash, and 16 KB SRAM. According to the NXP manufacturer product information, USB connectivity is an integral device feature. Practical implementation still requires correct D+ and D- routing, series damping, connector protection, and suitable enumeration firmware.
What can replace MK20DN64VLH5?
The closest documented drop-in candidates are MK20DX64VLH5 and MK10DX64VLH5 because both use 64-pin LQFP packages and are listed at 50 MHz with 64 KB flash. The MK20DX64VLH5 is the closer K20-family option, while MK10DX64VLH5 has a different family feature set. Confirm USB operation, SRAM, timers, analog interfaces, pin multiplexing, and qualification before replacing the original device.
Is MK20DN64VLH5 the same as MK20DX64VLH5?
No. The MK20DN64VLH5 and MK20DX64VLH5 are separate NXP ordering codes with closely related Kinetis K20 hardware characteristics, including a Cortex-M4 core, 50 MHz operation, 64 KB flash, and 64-LQFP packaging. The exact ordering-code difference can represent an option or feature variation, so use the NXP ordering information to determine whether all required USB and peripheral functions remain identical.
What is the best NXP equivalent for MK20DN64VLH5?
The MK20DX64VLH5 is the closest NXP-family candidate documented for the MK20DN64VLH5 because it retains a 50 MHz ARM Cortex-M4 core, 64 KB flash, and 64-pin LQFP package. It should be considered a possible replacement only after checking the NXP ordering codes and every required peripheral. The MK10DX64VLH5 is a broader Kinetis K10 option with a potentially different peripheral configuration.
Where can I buy MK20DN64VLH5 and what is its lead time?
Use the Request a Quote form on this page to request MK20DN64VLH5 availability, current lead time, and order details. NXP lists the MK20DN64VLH5 as active, and distributor product pages identify the exact 64-LQFP device. Quote confirmation should include the manufacturer ordering code, package form, quantity, and delivery schedule so the correct physical part is ordered.

工程参考数据: MK20DN64VLH5 ——对比、设计指导和合规信息。

选型指南

Choose the MK20DN64VLH5 for a USB-capable embedded design requiring a 50 MHz ARM Cortex-M4 core, 64 KB flash, 16 KB SRAM, and a 64-pin LQFP footprint. The MK20DX64VLH5 is the closest K20-family alternative and should be considered when its ordering code confirms every required peripheral and pin function. Choose the MK10DX64VLH5 only when its Kinetis K10 feature set satisfies the design and the USB, timer, analog, and memory resources have been checked. For an existing PCB, compare the complete NXP ordering information, pin multiplexing, USB configuration, memory map, clock tree, and qualification details rather than relying on package shape alone. The target is preferable when exact ordering-code control and the documented K20 USB configuration are priorities.

与替代料对比

参数 本产品 MK20DX64VLH5 MK10DX64VLH5
Package 64-LQFP (10x10) 64-LQFP (10x10) 64-LQFP (10x10)
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors
Processor Core ARM Cortex-M4 ARM Cortex-M4 ARM Cortex-M4
Maximum CPU Frequency 50 MHz 50 MHz 50 MHz
Flash Memory 64 KB 64 KB 64 KB
Product Family Kinetis K20 Kinetis K20 Kinetis K10

关键差异点

  • Closest documented K20-family replacement (对比 MK20DX64VLH5)
  • K20-family feature set (对比 MK10DX64VLH5)
  • USB-enabled embedded control platform (对比 MK10DX64VLH5)

设计说明

Place the required supply bypass capacitors immediately adjacent to the corresponding power and ground pins, using the manufacturer pinout and recommended layout. Keep USB D+ and D- traces short, matched, and routed over a continuous ground plane, with the NXP-recommended series damping near the appropriate device or connector location. Avoid routing high-current switching edges beneath the differential pair.

Confirm the exact core and I/O voltage domains from the NXP manufacturer datasheet before selecting regulators or level shifters. The device supports 1.8 V, 2.5 V, and 3.3 V operation, but mixed-voltage designs must satisfy each pin's input limits and power-up constraints. Include local decoupling at every supply entry and verify startup behavior across the complete temperature range used by the product.

For USB operation, treat D+ and D- as a controlled-impedance differential pair rather than independent digital nets. Use the manufacturer's reference layout, maintain continuous reference-plane return paths, apply the specified source termination, and provide connector-side ESD protection. Validate signal integrity with an appropriate USB test setup because branch stubs and layer transitions can degrade eye margins even when the MCU operates at 50 MHz.

Do not assume that an identical 64-LQFP footprint guarantees interchangeability. Review alternate-function mappings, USB enable control, timer resources, analog functions, reset behavior, and boot configuration for the exact ordering code. The MK20DN64VLH5, MK20DX64VLH5, and MK10DX64VLH5 share basic core, memory, frequency, and package characteristics, but their family-specific peripheral configurations can affect board compatibility.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

NXP lists MK20DN64VLH5 as active. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements were not identified in the referenced product information and require confirmation from NXP or the current manufacturer documentation.

数据核验日期: 2026-11-14 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

MK20DN64VLH5 datasheet MK20DN64VLH5 pinout MK20DN64VLH5 datasheet pdf MK20DN64VLH5 equivalent MK20DN64VLH5 replacement MK20DN64VLH5 cross reference MK20DN64VLH5 vs MK20DX64VLH5 MK20DN64VLH5 vs MK10DX64VLH5 MK20DN64VLH5 LQFP-64 footprint MK20DN64VLH5 application circuit MK20DN64VLH5 price MK20DN64VLH5 stock NXP MK20DN64VLH5 MK20DN64VLH5 USB motor control MK20DN64VLH5 50MHz Cortex-M4

相关元器件 & 术语

NXP Semiconductors MK20DN64VLH5 MK20DX64VLH5 MK10DX64VLH5 Kinetis K20 Kinetis K10 ARM Cortex-M4 microcontroller embedded processor semiconductor USB 64-LQFP LQFP package family surface-mount technology 64 KB flash memory 16 KB SRAM 50 MHz industrial motor control USB data acquisition industrial automation real-time control 32-bit ARM RISC 1.8 V 2.5 V 3.3 V
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情