NXP Semiconductors

MKE04Z64VQH4 - 48MHz 64KB Cortex-M0+ MCU | NXP

MPN: MKE04Z64VQH4 ✓ সক্রিয়
2.7 V to 5.5 V Vdss 64-QFP, 14 mm x 14 mm Package 48 MHz Speed 64 KB (64K x 8) Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MKE04Z64VQH4 সারাংশ

The NXP Semiconductors MKE04Z64VQH4 is a 32-bit Kinetis KE04 microcontroller with a 48 MHz Arm Cortex-M0+ core, 64 KB of Flash memory, 8 KB of SRAM, and a 64-QFP package measuring 14 mm by 14 mm. It operates from 2.7 V to 5.5 V and supports an ambient operating-temperature range from -40 °C to 105 °C. The device combines a compact general-purpose MCU package with enhanced ESD and EMC performance for cost-sensitive, high-reliability equipment.

A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and interface circuitry on one device. The Kinetis KE04 belongs to the hierarchy of embedded MCU, 32-bit RISC microcontroller, Cortex-M0+ processor, and semiconductor platform. Its Arm Cortex-M0+ architecture emphasizes low power consumption, deterministic execution, and a compact instruction set for embedded control systems operating from 2.7 V to 5.5 V.

The main features include a 48 MHz Cortex-M0+ processor, 64 KB Flash for firmware, and 8 KB SRAM for working data. The 64-QFP package provides 64 external leads for power, ground, clock, reset, programming, communications, and general-purpose I/O. NXP describes the family as a robust MCU intended for cost-sensitive applications exposed to electrically noisy industrial environments. Its operating voltage and temperature ratings also make it suitable for embedded control, appliance, and industrial interface products.

The KE04 architecture is designed for low-cost embedded designs that need more capability than an 8-bit controller without requiring a high-performance Cortex-M processor. At 48 MHz, the core provides substantially greater application-code capacity than entry-level 8-bit devices, while the Cortex-M0+ architecture maintains a simple programming model and efficient event-driven operation. Integrated analog peripherals support cost-sensitive products that need measurement and control functions without relying heavily on external components.

Typical applications include industrial control modules, motor and relay interfaces, appliance controllers, building equipment, energy meters, sensor nodes, and compact communications equipment. The 2.7 V to 5.5 V supply range permits operation from regulated 3.3 V and 5 V rails. The enhanced ESD and EMC performance is especially relevant to boards connected to motors, relays, long cables, or industrial sensors. The 64-pin package also offers more I/O and peripheral routing options than smaller 32-pin and 48-pin variants.

Designers should account for the high-current transitions and electrical noise associated with 5 V systems when arranging decoupling and grounding. Place the supply bypass capacitors close to the corresponding power pins, keep sensitive analog routing away from switching nodes, and provide a clean return path beneath the device. Before PCB release, verify pin multiplexing, programming signals, clock configuration, and the complete 64-pin assignment using the pin-description table in the manufacturer datasheet.

This product page combines the key MKE04Z64VQH4 characteristics with practical application guidance, same-family drop-in alternatives, package information, and engineering-oriented selection criteria. These details help engineers determine whether the 48 MHz Cortex-M0+ MCU, 64 KB Flash configuration, 8 KB SRAM, and 64-QFP footprint match the electrical, environmental, and mechanical requirements of a new embedded design.

এর জন্য ড্রপ-ইন বিকল্প MKE04Z64VQH4 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

MKE04Z128VQH4

✅ ড্রপ-ইন
📦 64-QFP (14x14 mm)
Flash increases from 64 KB to 128 KB (+100%); CPU remains 48 MHz Cortex-M0+ and the 64-QFP footprint is unchanged

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MKE06Z128VQH4

✅ ড্রপ-ইন
📦 64-QFP (14x14 mm)
Flash increases from 64 KB to 128 KB (+100%) and the device moves to the KE06 feature tier; CPU remains 48 MHz Cortex-M0+

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MKE06Z64VQH4

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 64-QFP (14x14 mm)
Flash remains 64 KB and CPU remains 48 MHz Cortex-M0+, while the device moves to the KE06 feature tier with additional peripherals

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MKE02Z64VQH4

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 64-QFP (14x14 mm)
Flash remains 64 KB and CPU remains 48 MHz Cortex-M0+, while the device uses the more basic KE02 feature tier

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MKE04Z32VQH4

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 64-QFP (14x14 mm)
Flash decreases from 64 KB to 32 KB (-50%); CPU remains 48 MHz Cortex-M0+ with the same 64-QFP footprint

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MKE04Z64VQH4 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type 32-bit ARM Cortex-M0+ microcontroller
Product Family Kinetis KE04
CPU Core Arm Cortex-M0+
CPU Architecture 32-bit RISC
Maximum CPU Frequency 48 MHz
Flash Memory 64 KB (64K x 8)
SRAM 8 KB
Operating Voltage Range 2.7 V to 5.5 V
অপারেটিং তাপমাত্রার পরিসর -40 °C to 105 °C
প্যাকেজ 64-QFP, 14 mm x 14 mm
মাউন্টিং টাইপ Surface mount
Shipping Package Tray
Terminal Finish Tin
Moisture Sensitivity Level MSL 3
Peak Reflow Temperature 260 °C
Maximum Time at Peak Reflow Temperature 40 s
JESD Code e3
ESD and EMC Performance Enhanced for high electrical-noise environments

MKE04Z64VQH4 tray পিন কনফিগারেশন গাইড

MKE04Z64VQH4 (tray প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

MKE04Z64VQH4-এর জন্য tray প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MKE04Z64VQH4.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

MKE04Z64VQH4 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Equipment Controller, Appliance Control Module, Motor and Relay Interface, Sensor Node and Monitoring Unit, Building and HVAC Controller, Embedded Communications Interface.

🏭

Industrial Equipment Controller

The MKE04Z64VQH4 fits industrial equipment controllers that require deterministic control, enough firmware memory, and improved resistance to electrical noise. Its 48 MHz Arm Cortex-M0+ core executes control logic quickly, while 64 KB of Flash stores application code and 8 KB of SRAM supports working state. The 2.7 V to 5.5 V supply range accommodates common industrial rails. Enhanced ESD and EMC performance is particularly valuable near relay drivers, motor controls, and long sensor cables. A 64-QFP footprint provides extensive I/O routing, but the board should include local decoupling, a controlled ground plane, and appropriately rated protection at externally accessible connectors.

🔧

Appliance Control Module

MKE04Z64VQH4 is appropriate for appliance controllers that coordinate user inputs, sensors, displays, motors, and communications within a 2.7 V to 5.5 V system. The 48 MHz Cortex-M0+ processor provides efficient event-driven control, and the 64 KB Flash capacity accommodates a meaningful embedded application without moving all logic into an external controller. Its 64-QFP package gives designers access to more peripheral pins than a compact 32-pin MCU. Use separate supply paths for motors and noisy switching stages, place bypass capacitors at the MCU pins, and maintain uninterrupted ground returns so transient activity does not disturb logic operation.

⚡

Motor and Relay Interface

The MKE04Z64VQH4 can supervise motors, relays, solenoids, and discrete sensors in compact industrial equipment. Its 48 MHz Cortex-M0+ core supports responsive timing for debouncing, state-machine control, fault detection, and periodic actuator updates. The 64 KB of Flash stores application logic, while 8 KB of SRAM accommodates buffers and status variables. Because inductive loads create large transients, the MCU should not directly drive them; use qualified driver circuits, protection diodes, and isolation where required. Keep high-current paths away from sensitive traces and place the MCU bypass network close to its supply pins to improve noise immunity.

🧩

Sensor Node and Monitoring Unit

MKE04Z64VQH4 suits compact sensor nodes that acquire measurements, apply calibration, detect thresholds, and report status through a local serial interface. The 48 MHz Cortex-M0+ core can service multiple interrupt-driven inputs, while 64 KB of Flash provides room for drivers and application logic. Operating from 2.7 V to 5.5 V allows integration with 3.3 V sensors and 5 V peripherals, provided the board does not exceed the MCU limits. The family’s enhanced ESD and EMC characteristics improve robustness when sensors connect through cables. Use short analog traces, controlled grounding, and appropriately placed filtering to preserve measurement quality.

🏠

Building and HVAC Controller

The MKE04Z64VQH4 is well matched to building-control modules that manage relays, temperature inputs, occupancy signals, and communications. The 48 MHz Cortex-M0+ core supports responsive scheduling, while 64 KB of Flash and 8 KB of SRAM are sufficient for compact supervisory firmware. Its -40 °C to 105 °C operating range supports equipment placed in controlled industrial or building environments. The 64-QFP package makes additional I/O available for sensors and actuators. Keep mains-connected switching circuitry outside the MCU area, observe isolation and clearance requirements, and route communications and sensor grounds to minimize coupling from inductive loads.

🌐

Embedded Communications Interface

MKE04Z64VQH4 can act as the supervisory controller for an embedded communications module with a local serial port, configuration interface, status indicators, and service diagnostics. Its 48 MHz Cortex-M0+ core and 64 KB of Flash are sufficient for protocol framing, local management, and firmware boot tasks. The 2.7 V to 5.5 V range permits flexible interface partitioning. SP3232-family transceivers can provide RS-232 physical-layer support when the system requires that legacy interface, while the MCU handles framing and control. Separate analog, digital, and switched-current return paths, and use controlled impedance or short spans for high-speed signals to minimize signal-integrity problems.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

What are the key specifications of MKE04Z64VQH4 that engineers should know?
The MKE04Z64VQH4 is a 48 MHz, 32-bit Arm Cortex-M0+ microcontroller with 64 KB Flash, 8 KB SRAM, a 2.7 V to 5.5 V supply range, and a 64-QFP package. According to the NXP KE04 datasheet, the family provides enhanced ESD and EMC performance for cost-sensitive, high-reliability applications. Its operating-temperature rating extends from -40 °C to 105 °C, making it appropriate for industrial control systems, appliance controllers, sensor nodes, and electrically noisy equipment.
What is the operating voltage of MKE04Z64VQH4?
The MKE04Z64VQH4 operates from 2.7 V to 5.5 V. The NXP product listing and the manufacturer KE04 datasheet identify support for both 3.3 V and 5 V embedded systems. Designers should ensure every supply rail remains inside that range during startup, transients, and normal operation. The MCU also requires local bypass capacitance placed close to its supply and ground pins.
Where can I download the MKE04Z64VQH4 datasheet PDF?
The MKE04Z64VQH4 datasheet PDF is available from NXP at https://www.nxp.com/docs/en/data-sheet/MKE04P80M48SF0.pdf. The document covers the KE04 sub-family, including device pin descriptions, electrical characteristics, memory organization, and peripheral functions. Engineers should use its complete 64-pin description table when creating the PCB footprint and assigning multiplexing options.
Where can I find the MKE04Z64VQH4 pinout and 64-pin assignments?
The complete MKE04Z64VQH4 pin assignments are defined in the pin-description table of the NXP KE04 datasheet. The package contains 64 leads in a 14 mm by 14 mm 64-QFP outline, with pin 1 identified by the package orientation marker. Use that table to confirm power, ground, reset, clock, programming, and peripheral multiplexing functions before routing the board.
What is the processor and memory configuration of MKE04Z64VQH4?
The MKE04Z64VQH4 uses a 32-bit Arm Cortex-M0+ core operating at up to 48 MHz and includes 64 KB of Flash memory with 8 KB of SRAM. According to the NXP manufacturer datasheet, this combination provides enough code and working-memory capacity for compact embedded controllers while retaining the low-cost and low-power characteristics of the Cortex-M0+ architecture.
Where to buy MKE04Z64VQH4 online?
The MKE04Z64VQH4 can be requested through the “Request a Quote” form on this page. The form supports current sourcing for the exact 64-QFP ordering code and lets buyers specify required quantities and packaging. NXP lists the MKE04Z64VQH4 as an active product, so engineers should confirm lifecycle and delivery status before committing a production BOM.
What is the price of MKE04Z64VQH4?
Current pricing for the MKE04Z64VQH4 is obtained through the “Request a Quote” form on this page. The structured quote workflow handles the exact MKE04Z64VQH4 ordering code rather than a related package or memory variant. For production planning, include the required shipment quantity and tray quantity so the offer reflects the intended order configuration.
What is the lead time and stock status for MKE04Z64VQH4?
Current stock and lead-time information for MKE04Z64VQH4 should be requested through the “Request a Quote” form on this page. NXP identifies the exact part as active, while current inventory and allocation can change with order volume. Buyers should state the production quantity, annual demand, and required ship date when requesting the quotation.
MKE04Z64VQH4 vs MKE04Z128VQH4: which is better for firmware-heavy applications?
MKE04Z128VQH4 is the better choice when firmware exceeds the 64 KB Flash capacity of MKE04Z64VQH4 because it provides 128 KB of Flash. Both devices use the same 48 MHz Arm Cortex-M0+ architecture, 2.7 V to 5.5 V operating range, and 64-QFP footprint. According to NXP family documentation, the difference is memory capacity, so firmware size and required working space should drive the selection.
What is the difference between MKE04Z64VQH4 and MKE06Z128VQH4?
MKE06Z128VQH4 provides 128 KB of Flash and belongs to the higher-feature KE06 family, while MKE04Z64VQH4 provides 64 KB of Flash in the KE04 family. Both maintain a 48 MHz Cortex-M0+ core and 64-QFP package according to NXP family information. The KE06 option is preferable when additional peripherals or memory are required; the KE04 option can reduce firmware and board-resource demand when those features are unnecessary.
When should I choose MKE04Z64VQH4 over MKE02Z64VQH4?
Choose MKE04Z64VQH4 when the application benefits from the broader KE04 feature set and enhanced ESD and EMC performance for electrically noisy environments. MKE02Z64VQH4 remains attractive for simpler, cost-sensitive embedded functions when the additional KE04 capabilities are unnecessary. According to NXP family documentation, both maintain a 48 MHz Cortex-M0+ core and a 64-QFP package, making resource utilization the main decision point.
When should I choose MKE04Z64VQH4 over MKE06Z64VQH4?
Choose MKE04Z64VQH4 when the design needs the KE04 family’s cost-sensitive positioning and robust environmental performance without the additional capabilities of KE06. MKE06Z64VQH4 is the stronger choice when its broader peripheral set provides a functional benefit. NXP documents both parts with a 48 MHz Cortex-M0+ core and 64-QFP format, so firmware requirements and available analog, communication, and timing resources determine the better fit.
Is MKE04Z64VQH4 suitable for industrial control applications?
The MKE04Z64VQH4 is suitable for many industrial control applications because it supports 2.7 V to 5.5 V operation, temperatures from -40 °C to 105 °C, and enhanced ESD and EMC performance. According to the NXP manufacturer datasheet, the KE04 family targets cost-sensitive, high-reliability equipment in high electrical-noise environments. Good PCB layout and surge protection remain necessary for exposed industrial nodes.
What can replace MKE04Z64VQH4 as a drop-in MCU?
MKE04Z128VQH4, MKE06Z128VQH4, MKE06Z64VQH4, and MKE02Z64VQH4 are the closest same-family drop-in candidates identified because they retain the 64-QFP footprint, 48 MHz Cortex-M0+ execution, and 2.7 V to 5.5 V supply range. Firmware, peripheral requirements, qualification, and lifecycle should still be checked. No cross-brand pin-compatible replacement was identified with enough technical detail to claim direct drop-in equivalence.
Is MKE04Z64VQH4 the same as MKE04Z64VLH4?
No, MKE04Z64VQH4 and MKE04Z64VLH4 use different package variants. The VQH4 version is supplied in a 64-QFP package measuring 14 mm by 14 mm, while the VLH4 product is associated with a smaller 48-pin LQFP package. Although both provide 64 KB of Flash and a 48 MHz Cortex-M0+ core, their pin counts and board footprints differ, so VLH4 is not a direct replacement for VQH4.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MKE04Z64VQH4 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose MKE04Z64VQH4 for a cost-sensitive 64-QFP design that needs a 48 MHz Arm Cortex-M0+ core, 64 KB of Flash, 8 KB of SRAM, 2.7 V to 5.5 V operation, and enhanced ESD and EMC characteristics for electrically noisy equipment. Select MKE04Z128VQH4 when the firmware grows beyond 64 KB, MKE06Z64VQH4 when KE06 peripherals are valuable, and MKE06Z128VQH4 when both expanded peripherals and 128 KB of Flash are required. Use MKE02Z64VQH4 for simpler applications that do not need the broader KE04 feature set, and MKE04Z32VQH4 only when 32 KB of Flash is sufficient. All five alternatives retain the 64-QFP footprint, but firmware, peripheral, qualification, and lifecycle requirements still require final verification.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য MKE04Z128VQH4 MKE06Z128VQH4 MKE06Z64VQH4 MKE02Z64VQH4 MKE04Z32VQH4
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 64-QFP (14x14 mm) 64-QFP (14x14 mm) - same 64-QFP (14x14 mm) - same 64-QFP (14x14 mm) - same 64-QFP (14x14 mm) - same 64-QFP (14x14 mm) - same
Product Family Kinetis KE04 Kinetis KE04 Kinetis KE06 Kinetis KE06 Kinetis KE02 Kinetis KE04
CPU Core Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+
Maximum CPU Frequency 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz
Flash Memory 64 KB 128 KB 128 KB 64 KB 64 KB 32 KB
Operating Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V
Environmental Positioning Enhanced ESD/EMC performance for electrically noisy applications KE04 family positioning KE06 family positioning KE06 family positioning KE02 family positioning KE04 family positioning

মূল পার্থক্যসমূহ

  • Balanced 64 KB Flash and 8 KB SRAM configuration (বনামMKE04Z32VQH4)
  • Lower Flash requirement than 128 KB family members (বনামMKE04Z128VQH4)
  • KE04 environmental positioning for noisy industrial systems (বনামMKE02Z64VQH4)
  • 48 MHz execution with a 64-pin package (বনামMKE04Z64VLH4)

ডিজাইন নোট

Place the supply bypass network directly beside the MKE04Z64VQH4 power and ground pins. The device supports 2.7 V to 5.5 V, but effective decoupling still depends on short current loops and low impedance between the capacitor, pin, and ground plane. Separate noisy loads such as motors or relay drivers from the MCU supply path where practical, and add local filtering where long wiring or switching nodes could introduce transients into the 2.7 V to 5.5 V rail.

Use the manufacturer pin-description table to assign every one of the 64 leads before routing the PCB. The 64-QFP footprint is 14 mm by 14 mm and includes power, ground, reset, clock, programming, communications, and multiplexed I/O functions. Keep programming and reset traces away from switching-node copper, maintain a continuous ground reference beneath the device, and avoid routing interrupt-sensitive signals parallel to high-current actuator paths.

Do not assume that every 64 KB Flash Kinetis part is interchangeable. MKE04Z64VQH4, MKE04Z128VQH4, MKE06Z64VQH4, MKE06Z128VQH4, MKE02Z64VQH4, and MKE04Z32VQH4 differ in memory size, peripheral availability, or family features. Check the exact ordering code, pin-multiplexing table, bootloader behavior, peripheral set, and firmware memory map before signing off a replacement.

The KE04 family is designed for improved ESD and EMC behavior in electrically noisy environments, but the MCU cannot replace board-level protection. Keep relay, motor, and mains-derived interfaces away from sensitive traces; provide protection and surge-current capacity at connectors; and return actuator current through a controlled path. This separation reduces common-impedance coupling and helps the 48 MHz Cortex-M0+ core maintain reliable timing and communications.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The exact part is listed with JESD-609 code e3, tin terminal finish, MSL 3, a 260 °C peak reflow temperature, and a 40-second maximum time at peak reflow. No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified.

ডেটা যাচাই করা হয়েছে: 2026-11-19 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

MKE04Z64VQH4 MKE04Z64VQH4 datasheet MKE04Z64VQH4 datasheet pdf MKE04Z64VQH4 pinout MKE04Z64VQH4 specifications MKE04Z64VQH4 equivalent MKE04Z64VQH4 replacement MKE04Z64VQH4 cross reference MKE04Z64VQH4 vs MKE04Z128VQH4 MKE04Z64VQH4 footprint NXP MKE04Z64VQH4 MKE04Z64VQH4 price MKE04Z64VQH4 stock 64 QFP Cortex-M0+ 48MHz MCU 64KB Flash 8KB SRAM 64-QFP MCU

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

NXP Semiconductors MKE04Z64VQH4 MKE04Z128VQH4 MKE06Z128VQH4 MKE06Z64VQH4 MKE02Z64VQH4 MKE04Z32VQH4 MKE04Z64VLH4 Kinetis KE04 Kinetis KE02 Kinetis KE06 Arm Cortex-M0+ 32-bit RISC microcontroller embedded microcontroller microcontroller semiconductor Flash memory SRAM 64-QFP package QFN family surface mount technology SMD package industrial control embedded control ESD protection EMC performance 2.7 V to 5.5 V supply 48 MHz processor operating temperature range
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন