MKE04Z64VQH4 - 48MHz 64KB Cortex-M0+ MCU | NXP
MPN: MKE04Z64VQH4 ✓ Hoạt độngMKE04Z64VQH4 Tóm tắt
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and interface circuitry on one device. The Kinetis KE04 belongs to the hierarchy of embedded MCU, 32-bit RISC microcontroller, Cortex-M0+ processor, and semiconductor platform. Its Arm Cortex-M0+ architecture emphasizes low power consumption, deterministic execution, and a compact instruction set for embedded control systems operating from 2.7 V to 5.5 V.
The main features include a 48 MHz Cortex-M0+ processor, 64 KB Flash for firmware, and 8 KB SRAM for working data. The 64-QFP package provides 64 external leads for power, ground, clock, reset, programming, communications, and general-purpose I/O. NXP describes the family as a robust MCU intended for cost-sensitive applications exposed to electrically noisy industrial environments. Its operating voltage and temperature ratings also make it suitable for embedded control, appliance, and industrial interface products.
The KE04 architecture is designed for low-cost embedded designs that need more capability than an 8-bit controller without requiring a high-performance Cortex-M processor. At 48 MHz, the core provides substantially greater application-code capacity than entry-level 8-bit devices, while the Cortex-M0+ architecture maintains a simple programming model and efficient event-driven operation. Integrated analog peripherals support cost-sensitive products that need measurement and control functions without relying heavily on external components.
Typical applications include industrial control modules, motor and relay interfaces, appliance controllers, building equipment, energy meters, sensor nodes, and compact communications equipment. The 2.7 V to 5.5 V supply range permits operation from regulated 3.3 V and 5 V rails. The enhanced ESD and EMC performance is especially relevant to boards connected to motors, relays, long cables, or industrial sensors. The 64-pin package also offers more I/O and peripheral routing options than smaller 32-pin and 48-pin variants.
Designers should account for the high-current transitions and electrical noise associated with 5 V systems when arranging decoupling and grounding. Place the supply bypass capacitors close to the corresponding power pins, keep sensitive analog routing away from switching nodes, and provide a clean return path beneath the device. Before PCB release, verify pin multiplexing, programming signals, clock configuration, and the complete 64-pin assignment using the pin-description table in the manufacturer datasheet.
This product page combines the key MKE04Z64VQH4 characteristics with practical application guidance, same-family drop-in alternatives, package information, and engineering-oriented selection criteria. These details help engineers determine whether the 48 MHz Cortex-M0+ MCU, 64 KB Flash configuration, 8 KB SRAM, and 64-QFP footprint match the electrical, environmental, and mechanical requirements of a new embedded design.
Bộ thay thế dễ dàng lắp đặt cho MKE04Z64VQH4 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
MKE04Z128VQH4
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MKE06Z128VQH4
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MKE06Z64VQH4
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MKE02Z64VQH4
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MKE04Z32VQH4
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MKE04Z64VQH4 Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit ARM Cortex-M0+ microcontroller |
| Product Family | Kinetis KE04 |
| CPU Core | Arm Cortex-M0+ |
| CPU Architecture | 32-bit RISC |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 64 KB (64K x 8) |
| SRAM | 8 KB |
| Operating Voltage Range | 2.7 V to 5.5 V |
| Khoảng nhiệt độ hoạt động | -40 °C to 105 °C |
| Hộp | 64-QFP, 14 mm x 14 mm |
| Kiểu lắp đặt | Surface mount |
| Shipping Package | Tray |
| Terminal Finish | Tin |
| Moisture Sensitivity Level | MSL 3 |
| Peak Reflow Temperature | 260 °C |
| Maximum Time at Peak Reflow Temperature | 40 s |
| JESD Code | e3 |
| ESD and EMC Performance | Enhanced for high electrical-noise environments |
Hướng dẫn cấu hình chân MKE04Z64VQH4 tray
Cấu hình chân cho MKE04Z64VQH4 (tray gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho MKE04Z64VQH4.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MKE04Z64VQH4 phù hợp cho 6 Áp dụngs: Industrial Equipment Controller, Appliance Control Module, Motor and Relay Interface, Sensor Node and Monitoring Unit, Building and HVAC Controller, Embedded Communications Interface.
Industrial Equipment Controller
The MKE04Z64VQH4 fits industrial equipment controllers that require deterministic control, enough firmware memory, and improved resistance to electrical noise. Its 48 MHz Arm Cortex-M0+ core executes control logic quickly, while 64 KB of Flash stores application code and 8 KB of SRAM supports working state. The 2.7 V to 5.5 V supply range accommodates common industrial rails. Enhanced ESD and EMC performance is particularly valuable near relay drivers, motor controls, and long sensor cables. A 64-QFP footprint provides extensive I/O routing, but the board should include local decoupling, a controlled ground plane, and appropriately rated protection at externally accessible connectors.
Được đề xuất
Appliance Control Module
MKE04Z64VQH4 is appropriate for appliance controllers that coordinate user inputs, sensors, displays, motors, and communications within a 2.7 V to 5.5 V system. The 48 MHz Cortex-M0+ processor provides efficient event-driven control, and the 64 KB Flash capacity accommodates a meaningful embedded application without moving all logic into an external controller. Its 64-QFP package gives designers access to more peripheral pins than a compact 32-pin MCU. Use separate supply paths for motors and noisy switching stages, place bypass capacitors at the MCU pins, and maintain uninterrupted ground returns so transient activity does not disturb logic operation.
Được đề xuất
Motor and Relay Interface
The MKE04Z64VQH4 can supervise motors, relays, solenoids, and discrete sensors in compact industrial equipment. Its 48 MHz Cortex-M0+ core supports responsive timing for debouncing, state-machine control, fault detection, and periodic actuator updates. The 64 KB of Flash stores application logic, while 8 KB of SRAM accommodates buffers and status variables. Because inductive loads create large transients, the MCU should not directly drive them; use qualified driver circuits, protection diodes, and isolation where required. Keep high-current paths away from sensitive traces and place the MCU bypass network close to its supply pins to improve noise immunity.
Được đề xuất
Sensor Node and Monitoring Unit
MKE04Z64VQH4 suits compact sensor nodes that acquire measurements, apply calibration, detect thresholds, and report status through a local serial interface. The 48 MHz Cortex-M0+ core can service multiple interrupt-driven inputs, while 64 KB of Flash provides room for drivers and application logic. Operating from 2.7 V to 5.5 V allows integration with 3.3 V sensors and 5 V peripherals, provided the board does not exceed the MCU limits. The family’s enhanced ESD and EMC characteristics improve robustness when sensors connect through cables. Use short analog traces, controlled grounding, and appropriately placed filtering to preserve measurement quality.
Được đề xuất
Building and HVAC Controller
The MKE04Z64VQH4 is well matched to building-control modules that manage relays, temperature inputs, occupancy signals, and communications. The 48 MHz Cortex-M0+ core supports responsive scheduling, while 64 KB of Flash and 8 KB of SRAM are sufficient for compact supervisory firmware. Its -40 °C to 105 °C operating range supports equipment placed in controlled industrial or building environments. The 64-QFP package makes additional I/O available for sensors and actuators. Keep mains-connected switching circuitry outside the MCU area, observe isolation and clearance requirements, and route communications and sensor grounds to minimize coupling from inductive loads.
Được đề xuất
Embedded Communications Interface
MKE04Z64VQH4 can act as the supervisory controller for an embedded communications module with a local serial port, configuration interface, status indicators, and service diagnostics. Its 48 MHz Cortex-M0+ core and 64 KB of Flash are sufficient for protocol framing, local management, and firmware boot tasks. The 2.7 V to 5.5 V range permits flexible interface partitioning. SP3232-family transceivers can provide RS-232 physical-layer support when the system requires that legacy interface, while the MCU handles framing and control. Separate analog, digital, and switched-current return paths, and use controlled impedance or short spans for high-speed signals to minimize signal-integrity problems.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MKE04Z64VQH4 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MKE04Z128VQH4 | MKE06Z128VQH4 | MKE06Z64VQH4 | MKE02Z64VQH4 | MKE04Z32VQH4 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 64-QFP (14x14 mm) | 64-QFP (14x14 mm) - same | 64-QFP (14x14 mm) - same | 64-QFP (14x14 mm) - same | 64-QFP (14x14 mm) - same | 64-QFP (14x14 mm) - same |
| Product Family | Kinetis KE04 | Kinetis KE04 | Kinetis KE06 | Kinetis KE06 | Kinetis KE02 | Kinetis KE04 |
| CPU Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 64 KB | 128 KB | 128 KB | 64 KB | 64 KB | 32 KB |
| Operating Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Environmental Positioning | Enhanced ESD/EMC performance for electrically noisy applications | KE04 family positioning | KE06 family positioning | KE06 family positioning | KE02 family positioning | KE04 family positioning |
Bảo phân biệt quan trọng
- Balanced 64 KB Flash and 8 KB SRAM configuration (vsMKE04Z32VQH4)
- Lower Flash requirement than 128 KB family members (vsMKE04Z128VQH4)
- KE04 environmental positioning for noisy industrial systems (vsMKE02Z64VQH4)
- 48 MHz execution with a 64-pin package (vsMKE04Z64VLH4)
Ghi chú thiết kế
Place the supply bypass network directly beside the MKE04Z64VQH4 power and ground pins. The device supports 2.7 V to 5.5 V, but effective decoupling still depends on short current loops and low impedance between the capacitor, pin, and ground plane. Separate noisy loads such as motors or relay drivers from the MCU supply path where practical, and add local filtering where long wiring or switching nodes could introduce transients into the 2.7 V to 5.5 V rail.
Use the manufacturer pin-description table to assign every one of the 64 leads before routing the PCB. The 64-QFP footprint is 14 mm by 14 mm and includes power, ground, reset, clock, programming, communications, and multiplexed I/O functions. Keep programming and reset traces away from switching-node copper, maintain a continuous ground reference beneath the device, and avoid routing interrupt-sensitive signals parallel to high-current actuator paths.
Do not assume that every 64 KB Flash Kinetis part is interchangeable. MKE04Z64VQH4, MKE04Z128VQH4, MKE06Z64VQH4, MKE06Z128VQH4, MKE02Z64VQH4, and MKE04Z32VQH4 differ in memory size, peripheral availability, or family features. Check the exact ordering code, pin-multiplexing table, bootloader behavior, peripheral set, and firmware memory map before signing off a replacement.
The KE04 family is designed for improved ESD and EMC behavior in electrically noisy environments, but the MCU cannot replace board-level protection. Keep relay, motor, and mains-derived interfaces away from sensitive traces; provide protection and surge-current capacity at connectors; and return actuator current through a controlled path. This separation reduces common-impedance coupling and helps the 48 MHz Cortex-M0+ core maintain reliable timing and communications.
Thông tin tuân thủ
The exact part is listed with JESD-609 code e3, tin terminal finish, MSL 3, a 260 °C peak reflow temperature, and a 40-second maximum time at peak reflow. No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified.