PCM1718EG4 - 18-Bit Stereo Audio DAC | Texas Instruments
MPN: PCM1718EG4 ✗ জীবনকালের সমাপ্তিPCM1718EG4 সারাংশ
An audio DAC converts digital audio samples into analog voltage signals that can drive downstream amplifiers, speakers, headphones, or line-level circuitry. Within the broader signal-chain hierarchy, the PCM1718EG4 is a stereo audio D/A converter, which is a specialized form of ADC/DAC semiconductor used in digital audio equipment. Its I2S interface connects with a digital audio processor or audio codec while the converter performs the final digital-to-analog conversion stage.
The primary specifications are 18-bit resolution, two audio channels, and a maximum sampling rate of 48 kHz. The 2.7 V to 5.5 V supply range allows operation from common low-voltage digital and analog rails. The 20-SSOP package provides a surface-mount implementation for compact consumer, communications, and industrial audio designs, while the specified -25°C to +85°C operating range supports moderate-temperature equipment.
The PCM1718EG4 is identified as a delta-sigma stereo DAC, pairing a serial digital input stage with dual analog output channels. The I2S interface is designed for integrated digital audio systems where clock and serial-data signals arrive from an audio processor. Dual-channel operation supports standard stereo playback paths without requiring two separate converter packages. Its 25 mA supply-current figure and 3.1 V maximum analog output voltage provide useful constraints for analog-output, power-budget, and downstream-signal-chain design.
Typical uses include stereo audio playback in consumer electronics, digital audio source equipment, multimedia systems, communications equipment, and embedded audio products. It is especially relevant where a 48 kHz sampling rate and 18-bit conversion are sufficient but a higher-resolution converter is unnecessary. The dual outputs can feed an audio amplifier or volume-control stage, while the I2S connection reduces the number of parallel digital signal lines required from the audio source.
Designers should treat the analog and digital supply rails as separate implementation concerns. Place the device-side bypass capacitors close to its supply pins and keep the analog output routing away from noisy digital clock and serial-data paths. The 20-SSOP footprint requires careful land-pattern reproduction, while the 3.1 V maximum analog output voltage must remain below downstream amplifier input limits.
This page organizes the PCM1718EG4 specifications, verified manufacturer documentation, sourcing information, functional application guidance, and the limited drop-in alternatives identified for the device. It also highlights design considerations that engineers can apply when evaluating this SoundPlus stereo DAC for an existing 20-SSOP audio subsystem.
এর জন্য ড্রপ-ইন বিকল্প PCM1718EG4 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
PCM1718E/2KG4
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
PCM1718EG4 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Converter Type | Stereo audio digital-to-analog converter |
| রেজোলিউশন | 18 bit |
| Number of Channels | 2 channels |
| Maximum Sampling Rate | 48 kHz |
| Digital Interface | I2S |
| Supply Voltage Range | 2.7 V to 5.5 V |
| সাপ্লাই কারেন্ট | 25 mA |
| Maximum Analog Output Voltage | 3.1 V |
| অপারেটিং তাপমাত্রার পরিসর | -25°C to +85°C |
| প্যাকেজ | 20-SSOP |
| Terminal Count | 20 terminals |
| Package Width | 0.209 m to 5.30 mm |
| মাউন্টিং টাইপ | Surface mount |
| Terminal Form | Gull wing |
| Converter Architecture | Delta-sigma |
| Product Family | SoundPlus stereo DAC |
PCM1718EG4 0.209 m to 5.30 mm পিন কনফিগারেশন গাইড
PCM1718EG4 (0.209 m to 5.30 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি PCM1718EG4.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
PCM1718EG4 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Stereo Consumer Audio Playback, Multimedia Audio Source Equipment, Communications Audio Terminal, Embedded Audio and IoT Devices, Digital Audio Headphone Front End, Industrial Audio Control Interface.
Stereo Consumer Audio Playback
The PCM1718EG4 fits stereo consumer audio playback because it combines 18-bit conversion, two output channels, and a 48 kHz maximum sampling rate. Place the converter after an audio processor that provides I2S data and clocks, then route its left and right analog outputs toward a volume-control and amplifier stage. Its 2.7 V to 5.5 V operating range supports common low-voltage equipment, while the 3.1 V maximum analog output voltage must remain compatible with downstream gain and clipping limits.
সুপারিশকৃত
Multimedia Audio Source Equipment
A multimedia source can use the PCM1718EG4 as the final stereo DAC when its I2S interface matches the source processor and 18-bit, 48 kHz performance is adequate. The two-channel architecture avoids duplicating the converter for left and right audio paths. Its 25 mA supply current contributes to the converter rail budget, while the 20-SSOP package supports compact board layouts. Digital clock and data routing should remain separated from the analog output section to limit converted-signal contamination.
সুপারিশকৃত
Communications Audio Terminal
The PCM1718EG4 is suitable for communications equipment requiring a compact stereo playback converter with a common digital-audio interface. An I2S source processor can feed the PCM1718EG4, whose left and right analog outputs can then drive a line-level or headphone amplification stage. The -25°C to +85°C operating range fits many indoor commercial environments, and the 2.7 V minimum supply voltage supports low-voltage embedded designs. Environmental requirements outside this range require a different converter.
সুপারিশকৃত
Embedded Audio and IoT Devices
Compact embedded and IoT products can use the PCM1718EG4 when the audio subsystem requires an I2S-compatible stereo DAC without a higher-resolution or higher-rate converter. Its 20-SSOP surface-mount package conserves board area, and its 2.7 V to 5.5 V range accommodates common digital supply systems. The design must account for the 25 mA supply demand, provide local bypass capacitance, and keep analog outputs short and well separated from switching regulators and fast digital clocks.
সুপারিশকৃত
Digital Audio Headphone Front End
The PCM1718EG4 can form the converter stage of a digital headphone front end when 18-bit resolution and 48 kHz sampling meet the product requirements. The I2S input accepts digital audio from the playback engine, and the dual analog outputs feed the headphone amplifier. Because the maximum analog output voltage is 3.1 V, gain and headroom must be calculated before the downstream stage is selected. Close placement of supply bypass components also helps maintain a stable converter reference during playback transitions.
সুপারিশকৃত
Industrial Audio Control Interface
The PCM1718EG4 can serve as the audio conversion element in industrial equipment that accepts digital audio and requires two analog output channels. Its operating range of -25°C to +85°C supports many industrial indoor environments, while the compact 20-SSOP package fits space-constrained control panels or embedded subsystems. Designers should verify EMC susceptibility, grounding, and analog-output headroom under the full temperature range. The I2S timing and supply requirements must also satisfy the system's digital source during worst-case processing load.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা PCM1718EG4 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | PCM1718E/2KG4 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 20-SSOP | 20-SSOP |
| Resolution | 18 bit | 18 bit |
| Number of Channels | 2 channels | 2 channels |
| Maximum Sampling Rate | 48 kHz | 48 kHz |
| Digital Interface | I2S | I2S |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
মূল পার্থক্যসমূহ
- Directly identified same-package replacement path (বনামPCM1718E/2KG4)
- Stereo conversion in one package (বনামPCM1718E/2KG4)
- Direct digital-audio interface (বনামPCM1718E/2KG4)
ডিজাইন নোট
Reproduce the 20-SSOP land pattern directly from the Texas Instruments package drawing and route both analog outputs away from the I2S clock and data traces. Place the device-side supply bypass capacitors close to the supply and ground pins to minimize loop area. Keep the two output traces short and symmetrical when they feed a stereo amplifier or volume-control network.
Budget the PCM1718EG4's 25 mA supply current when designing the analog rail and bypass network. The supported operating range is 2.7 V to 5.5 V, but the usable output headroom must also be checked against the 3.1 V maximum analog output voltage. A regulator selected only for nominal voltage compatibility may still be unsuitable if its transient response, noise, or allowable headroom is inadequate.
Confirm the source processor's I2S clock polarity, data timing, and sample-rate relationship against the PCM1718 datasheet before releasing the PCB. Route clock and serial data as controlled-impedance digital signals over a continuous reference plane, and avoid sharing long paths with analog outputs. Grounding and return-current decisions should minimize coupling between the digital input section and the two analog output channels.
কমপ্লায়েন্স তথ্য
The manufacturer product documentation and distributor listings do not establish the requested compliance statuses for PCM1718EG4. The part is identified as not intended for new designs. A public comparison page mentions RoHS and REACH, but it does not provide explicit status values for this exact orderable code.