Texas Instruments

PCM1718EG4 - 18-Bit Stereo Audio DAC | Texas Instruments

MPN: PCM1718EG4 ✗ Tapus ng Buhay
2.7 V to 5.5 V Vdss 25 mA Id 20-SSOP Package
MOQ: 1 |

PCM1718EG4 Ulas

Texas Instruments PCM1718EG4 is an 18-bit stereo digital-to-analog converter with a 48 kHz sampling rate, an I2S digital interface, dual-channel audio output, and a 20-SSOP surface-mount package. The device operates from a 2.7 V to 5.5 V power supply and supports an operating temperature range of -25°C to +85°C.

An audio DAC converts digital audio samples into analog voltage signals that can drive downstream amplifiers, speakers, headphones, or line-level circuitry. Within the broader signal-chain hierarchy, the PCM1718EG4 is a stereo audio D/A converter, which is a specialized form of ADC/DAC semiconductor used in digital audio equipment. Its I2S interface connects with a digital audio processor or audio codec while the converter performs the final digital-to-analog conversion stage.

The primary specifications are 18-bit resolution, two audio channels, and a maximum sampling rate of 48 kHz. The 2.7 V to 5.5 V supply range allows operation from common low-voltage digital and analog rails. The 20-SSOP package provides a surface-mount implementation for compact consumer, communications, and industrial audio designs, while the specified -25°C to +85°C operating range supports moderate-temperature equipment.

The PCM1718EG4 is identified as a delta-sigma stereo DAC, pairing a serial digital input stage with dual analog output channels. The I2S interface is designed for integrated digital audio systems where clock and serial-data signals arrive from an audio processor. Dual-channel operation supports standard stereo playback paths without requiring two separate converter packages. Its 25 mA supply-current figure and 3.1 V maximum analog output voltage provide useful constraints for analog-output, power-budget, and downstream-signal-chain design.

Typical uses include stereo audio playback in consumer electronics, digital audio source equipment, multimedia systems, communications equipment, and embedded audio products. It is especially relevant where a 48 kHz sampling rate and 18-bit conversion are sufficient but a higher-resolution converter is unnecessary. The dual outputs can feed an audio amplifier or volume-control stage, while the I2S connection reduces the number of parallel digital signal lines required from the audio source.

Designers should treat the analog and digital supply rails as separate implementation concerns. Place the device-side bypass capacitors close to its supply pins and keep the analog output routing away from noisy digital clock and serial-data paths. The 20-SSOP footprint requires careful land-pattern reproduction, while the 3.1 V maximum analog output voltage must remain below downstream amplifier input limits.

This page organizes the PCM1718EG4 specifications, verified manufacturer documentation, sourcing information, functional application guidance, and the limited drop-in alternatives identified for the device. It also highlights design considerations that engineers can apply when evaluating this SoundPlus stereo DAC for an existing 20-SSOP audio subsystem.

Mga alternatibo na pwedeng ilagay na PCM1718EG4 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

PCM1718E/2KG4

✅ Drop-In
📦 20-SSOP
Same reported DAC performance, terminals, and SSOP package; ordering-code and lifecycle details must still be verified.

📋 Alternatibo na Reference (hindi sa katalogo)

PCM1718EG4 Mga Pinakamataas na Rating at Electrical Characteristics

Converter Type Stereo audio digital-to-analog converter
Pangangasiwaan 18 bit
Number of Channels 2 channels
Maximum Sampling Rate 48 kHz
Digital Interface I2S
Supply Voltage Range 2.7 V to 5.5 V
Kuru-kuryente ng Pagbibigay 25 mA
Maximum Analog Output Voltage 3.1 V
Hanay ng Temperature na Operasyon -25°C to +85°C
Packhaging 20-SSOP
Terminal Count 20 terminals
Package Width 0.209 m to 5.30 mm
Uri ng Pagpapasok Surface mount
Terminal Form Gull wing
Converter Architecture Delta-sigma
Product Family SoundPlus stereo DAC

Gabay sa Pin Configuration ng PCM1718EG4 0.209 m to 5.30 mm

Pin configuration para sa PCM1718EG4 (0.209 m to 5.30 mm package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng 0.209 m to 5.30 mm package para sa PCM1718EG4

Wala ng detalyadong pinout data na magagamit para sa PCM1718EG4.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

PCM1718EG4 ay nararapat para sa 6 aplikasyons: Stereo Consumer Audio Playback, Multimedia Audio Source Equipment, Communications Audio Terminal, Embedded Audio and IoT Devices, Digital Audio Headphone Front End, Industrial Audio Control Interface.

🎧

Stereo Consumer Audio Playback

The PCM1718EG4 fits stereo consumer audio playback because it combines 18-bit conversion, two output channels, and a 48 kHz maximum sampling rate. Place the converter after an audio processor that provides I2S data and clocks, then route its left and right analog outputs toward a volume-control and amplifier stage. Its 2.7 V to 5.5 V operating range supports common low-voltage equipment, while the 3.1 V maximum analog output voltage must remain compatible with downstream gain and clipping limits.

📺

Multimedia Audio Source Equipment

A multimedia source can use the PCM1718EG4 as the final stereo DAC when its I2S interface matches the source processor and 18-bit, 48 kHz performance is adequate. The two-channel architecture avoids duplicating the converter for left and right audio paths. Its 25 mA supply current contributes to the converter rail budget, while the 20-SSOP package supports compact board layouts. Digital clock and data routing should remain separated from the analog output section to limit converted-signal contamination.

🌐

Communications Audio Terminal

The PCM1718EG4 is suitable for communications equipment requiring a compact stereo playback converter with a common digital-audio interface. An I2S source processor can feed the PCM1718EG4, whose left and right analog outputs can then drive a line-level or headphone amplification stage. The -25°C to +85°C operating range fits many indoor commercial environments, and the 2.7 V minimum supply voltage supports low-voltage embedded designs. Environmental requirements outside this range require a different converter.

🧩

Embedded Audio and IoT Devices

Compact embedded and IoT products can use the PCM1718EG4 when the audio subsystem requires an I2S-compatible stereo DAC without a higher-resolution or higher-rate converter. Its 20-SSOP surface-mount package conserves board area, and its 2.7 V to 5.5 V range accommodates common digital supply systems. The design must account for the 25 mA supply demand, provide local bypass capacitance, and keep analog outputs short and well separated from switching regulators and fast digital clocks.

🎵

Digital Audio Headphone Front End

The PCM1718EG4 can form the converter stage of a digital headphone front end when 18-bit resolution and 48 kHz sampling meet the product requirements. The I2S input accepts digital audio from the playback engine, and the dual analog outputs feed the headphone amplifier. Because the maximum analog output voltage is 3.1 V, gain and headroom must be calculated before the downstream stage is selected. Close placement of supply bypass components also helps maintain a stable converter reference during playback transitions.

🏭

Industrial Audio Control Interface

The PCM1718EG4 can serve as the audio conversion element in industrial equipment that accepts digital audio and requires two analog output channels. Its operating range of -25°C to +85°C supports many industrial indoor environments, while the compact 20-SSOP package fits space-constrained control panels or embedded subsystems. Designers should verify EMC susceptibility, grounding, and analog-output headroom under the full temperature range. The I2S timing and supply requirements must also satisfy the system's digital source during worst-case processing load.

Buod ng mga Inirekomendang Produkto

PCM1718EG4 Texas Instruments Ginagamit sa: Stereo Consumer Audio Playback, Multimedia Audio Source Equipment, Communications Audio Terminal, Embedded Audio and IoT Devices, Digital Audio Headphone Front End, Industrial Audio Control Interface PCM1718E/2KG4 Identified same-family replacement candidate Ginagamit sa: Stereo Consumer Audio Playback, Multimedia Audio Source Equipment, Communications Audio Terminal, Embedded Audio and IoT Devices, Digital Audio Headphone Front End, Industrial Audio Control Interface
What are the key specifications of PCM1718EG4 that engineers should know?
The PCM1718EG4 is an 18-bit, dual-channel stereo DAC with a 48 kHz maximum sampling rate and I2S digital interface. According to the Texas Instruments PCM1718 datasheet, it operates from 2.7 V to 5.5 V, draws 25 mA supply current, provides a maximum analog output voltage of 3.1 V, and is specified from -25°C to +85°C. The device is packaged in a 20-SSOP surface-mount format.
Where can I download the PCM1718EG4 datasheet PDF?
The official PCM1718EG4 datasheet is available from Texas Instruments at https://www.ti.com/lit/gpn/pcm1718. It is the appropriate document for the converter's electrical characteristics, pin descriptions, application information, and recommended circuit arrangements. The product is the PCM1718 in the 20-SSOP EG4 package, so designers should verify that every package-specific drawing and orderable-part code matches PCM1718EG4.
Where can I find the PCM1718EG4 pinout?
The PCM1718EG4 pinout is published in the pin-configuration section of the Texas Instruments PCM1718 datasheet at https://www.ti.com/lit/gpn/pcm1718. The package contains 20 terminals, so the land pattern must account for every numbered pin and the SSOP lead pitch. Use the manufacturer pin-description table when assigning power, ground, clock, data, and analog-output nets; do not infer connections solely from function names.
What is the PCM1718EG4 used for?
The PCM1718EG4 is used as the stereo digital-to-analog conversion stage in digital audio products. Its 18-bit resolution, dual channels, 48 kHz sampling rate, and I2S interface suit consumer playback, communications equipment, multimedia systems, and embedded audio products. It accepts digital audio from a processor or codec and produces two analog output channels for subsequent amplification or line-level routing.
What is the operating voltage of PCM1718EG4?
The PCM1718EG4 operates from 2.7 V to 5.5 V. The Texas Instruments PCM1718 datasheet identifies this range as the device's supported power-supply interval. Supply design must keep transients and ripple within allowable limits while preserving the headroom needed by the digital interface and analog output stage. The specified 25 mA supply current is also relevant when sizing the analog rail.
Does PCM1718EG4 support stereo audio and I2S?
Yes, the PCM1718EG4 supports two audio channels and an I2S serial interface. Texas Instruments describes it as a SoundPlus stereo DAC with 18-bit resolution and a 48 kHz sampling rate. The I2S connection carries digital audio data and associated clock signals from the source processor, while the converter provides separate left- and right-channel analog outputs.
Can PCM1718EG4 be used in a 3.3 V audio system?
Yes, a 3.3 V audio system falls within the PCM1718EG4's 2.7 V to 5.5 V operating range. The converter can therefore operate from a regulated 3.3 V rail while producing a maximum analog output voltage of 3.1 V. Confirm that downstream amplifier gain and input limits preserve the analog signal headroom at 3.1 V.
PCM1718EG4 vs PCM1718E/2KG4 - which is the better drop-in choice?
PCM1718E/2KG4 is the closest identified alternative because it is described as a complete replacement with consistent terminals and package, while retaining the same DAC characteristics. The PCM1718EG4 is specified as an 18-bit, 48 kHz, dual-channel I2S converter in a 20-SSOP package. Verify the exact ordering code, marking, temperature grade, and application-specific requirements before approving the substitution.
What is the difference between PCM1718EG4 and PCM1717E?
PCM1718EG4 is an 18-bit stereo SoundPlus DAC with a 48 kHz sampling rate and I2S interface in a 20-SSOP package. A public comparison identifies PCM1717E as a related converter, but it does not establish that every electrical parameter and pin function is identical. Choose PCM1717E only after reviewing its manufacturer datasheet for resolution, interface timing, supply requirements, and 20-SSOP pin compatibility.
When should I choose PCM1718EG4 over PCM1718E/2KG4?
Choose PCM1718EG4 when its exact orderable code, temperature specification, and packaging are required by the production design. Choose PCM1718E/2KG4 when its complete-replacement description has been verified against the same PCB and functional requirements. The identified equivalence supports footprint reuse, but production engineers should still check clock timing, supply behavior, analog output limits, and lifecycle status for the selected code.
Is PCM1718EG4 suitable for multimedia and communications equipment?
The PCM1718EG4 is suitable for many multimedia and communications audio paths because it combines 18-bit resolution, dual-channel conversion, a 48 kHz sampling rate, and an I2S interface. Its 2.7 V to 5.5 V supply range supports low-voltage portable and embedded systems. The -25°C to +85°C range is appropriate for many commercial environments but should be checked against the equipment's environmental requirements.
What can replace PCM1718EG4?
PCM1718E/2KG4 is the verified drop-in candidate identified for PCM1718EG4, with consistent terminals and package characteristics. No additional pin-to-pin alternatives could be substantiated from the available cross-reference information, so other converter families should not be assumed to be drop-in replacements. Validate power rails, I2S timing, analog output range, filtering requirements, and every physical pin against the manufacturer datasheet.
Is PCM1718EG4 the same as PCM1718E/2KG4?
PCM1718E/2KG4 is reported as a complete replacement for PCM1718EG4, with consistent main performance parameters, terminals, and package. PCM1718EG4 itself is the 20-SSOP, 18-bit, 48 kHz, dual-channel I2S version of the PCM1718 SoundPlus stereo DAC. The ordering suffixes still matter, so confirm the exact marking and temperature grade before treating the parts as interchangeable.
Where can I buy PCM1718EG4 online and what is its lead time?
Use the Request a Quote form on this XAIPART product page to request PCM1718EG4 availability, lot information, and a current lead-time commitment for the exact 20-SSOP orderable code. The part is identified as not intended for new designs, so lifecycle planning matters for production continuity. Request the complete MPN, required quantity, target date, and acceptable alternative date with the quotation.
How much does PCM1718EG4 cost and is it in stock?
Use the Request a Quote form on this page for the current PCM1718EG4 price, stock position, quantity breaks, and delivery schedule. Static commercial terms can change without notice, particularly for a part marked not intended for new designs. A quotation should identify the exact PCM1718EG4 suffix, quantity, lead time, and authorized sourcing route so that obsolete-risk and schedule requirements can be evaluated together.

Impormasyon ng Talumpati sa Engineering for PCM1718EG4 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose PCM1718EG4 when an existing design requires a Texas Instruments SoundPlus stereo DAC with 18-bit resolution, 48 kHz maximum sampling, an I2S interface, and a 20-SSOP footprint. Choose PCM1718E/2KG4 when its exact ordering code, temperature grade, marking, and lifecycle terms meet the production requirement and the reported complete-replacement relationship has been checked against the current manufacturer documentation. The choice should also consider the 2.7 V to 5.5 V supply range, 25 mA supply current, and 3.1 V maximum analog output voltage. Do not select a different DAC family solely because it also uses a 20-pin package; interface timing, pin functions, analog filtering, supply behavior, and output architecture must be verified. For new designs where the part is marked not intended for new designs, confirm lifecycle risk and obtain an availability commitment before committing the PCB.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto PCM1718E/2KG4
Brand Texas Instruments Texas Instruments
Package 20-SSOP 20-SSOP
Resolution 18 bit 18 bit
Number of Channels 2 channels 2 channels
Maximum Sampling Rate 48 kHz 48 kHz
Digital Interface I2S I2S
Supply Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V

Pangunahing mga Pagkakaiba

  • Directly identified same-package replacement path (kumpara saPCM1718E/2KG4)
  • Stereo conversion in one package (kumpara saPCM1718E/2KG4)
  • Direct digital-audio interface (kumpara saPCM1718E/2KG4)

Talaan ng Disenyo

Reproduce the 20-SSOP land pattern directly from the Texas Instruments package drawing and route both analog outputs away from the I2S clock and data traces. Place the device-side supply bypass capacitors close to the supply and ground pins to minimize loop area. Keep the two output traces short and symmetrical when they feed a stereo amplifier or volume-control network.

Budget the PCM1718EG4's 25 mA supply current when designing the analog rail and bypass network. The supported operating range is 2.7 V to 5.5 V, but the usable output headroom must also be checked against the 3.1 V maximum analog output voltage. A regulator selected only for nominal voltage compatibility may still be unsuitable if its transient response, noise, or allowable headroom is inadequate.

Confirm the source processor's I2S clock polarity, data timing, and sample-rate relationship against the PCM1718 datasheet before releasing the PCB. Route clock and serial data as controlled-impedance digital signals over a continuous reference plane, and avoid sharing long paths with analog outputs. Grounding and return-current decisions should minimize coupling between the digital input section and the two analog output channels.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The manufacturer product documentation and distributor listings do not establish the requested compliance statuses for PCM1718EG4. The part is identified as not intended for new designs. A public comparison page mentions RoHS and REACH, but it does not provide explicit status values for this exact orderable code.

Data napatotohanan sa: 2026-11-15 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

PCM1718EG4 datasheet PCM1718EG4 pinout PCM1718EG4 datasheet pdf PCM1718EG4 specifications PCM1718EG4 equivalent PCM1718EG4 replacement PCM1718EG4 price PCM1718EG4 stock Texas Instruments PCM1718EG4 PCM1718EG4 20-SSOP package PCM1718EG4 I2S stereo DAC PCM1718EG4 audio application circuit PCM1718EG4 vs PCM1718E/2KG4 PCM1718EG4 SSOP footprint

Mga kaugnay na Mga Komponente at mga Tuntunin

Texas Instruments PCM1718EG4 PCM1718E/2KG4 PCM1717E PCM1754TDBQRQ1 SoundPlus digital-to-analog converter stereo DAC audio DAC ADC/DAC delta-sigma converter I2S 18-bit resolution 48 kHz sampling rate dual-channel audio analog output voltage supply current 2.7 V to 5.5 V power supply 20-SSOP SSOP package family surface mount SMD RoHS REACH AEC-Q100
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ