Texas Instruments

PCM3006TG6 - 16-Bit Stereo Audio Codec | Texas Instruments

MPN: PCM3006TG6 ✓ সক্রিয়
3 V Vdss 24-SSOP Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

PCM3006TG6 সারাংশ

The Texas Instruments PCM3006TG6 is a 16-bit stereo audio codec with single-ended analog input and output, a serial digital interface, and a 24-pin SSOP package. It operates from a 3 V power supply, supports a -25 °C to 85 °C operating-temperature range, and is designed for compact stereo audio signal conversion. Its single-chip integration makes it suitable for audio appliances, portable equipment, and other systems requiring both analog-to-digital and digital-to-analog conversion.

An audio codec is an integrated circuit that converts between analog audio signals and a digital data stream. The PCM3006TG6 belongs to the stereo audio codec hierarchy, combining a pair of analog inputs, a pair of analog outputs, delta-sigma ADCs and DACs, digital filters, and a serial host interface. This integration reduces the number of separate converters required in an audio subsystem while retaining a defined path from microphone or line-level input to digital audio data and back to an analog output.

The codec uses delta-sigma modulation with 64-times oversampling for both the ADC and DAC sections. Its ADCs include digital decimation filters, while its DACs include digital interpolation filters. The 16-bit format provides a practical balance between audio resolution, interface bandwidth, and implementation complexity for consumer and embedded stereo systems. The 24-SSOP package also has a stated seated height of 1.45 mm, supporting compact board construction.

The digital connection uses a serial interface, allowing the codec to communicate with a host processor, digital audio controller, or application-specific integrated circuit. Because digital audio data is serialized, the external connection requires fewer signal conductors than a parallel interface. Clocking, data-format selection, reset behavior, and analog routing must be configured consistently with the surrounding controller to prevent framing or timing errors.

Typical uses include stereo line-level processing, multimedia audio conversion, consumer audio appliances, portable equipment, and embedded systems that exchange PCM audio data with a digital processor. The single-ended analog architecture simplifies external signal conditioning compared with a differential implementation, although the application still needs suitable input and output filtering, grounding, and signal-level design.

A critical implementation requirement is to follow the manufacturer datasheet reference circuit for analog, digital, and power connections. Place the required bypass capacitors close to their supply pins, keep analog and digital return paths disciplined, and treat the codec interface traces as timing-sensitive clock and data routes. Adequate analog headroom and correct input or output scaling are necessary to prevent distortion and clipping.

This product page combines the Texas Instruments codec specifications with package details, sourcing guidance, application-focused design notes, and a verified same-family replacement reference. It is intended to help engineers assess the PCM3006TG6 for an existing 3 V stereo audio design before committing to a PCB or production release.

এর জন্য ড্রপ-ইন বিকল্প PCM3006TG6 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible PCM3006TG6 (একই form factor এবং footprint) — পার্থক্য রয়েছে AEC-Q100 Qualification, Product Type.

Texas Instruments
AEC-Q100 Qualification: unknown
Product Type: Stereo audio codec IC
এর সাথে তুলনা করুন PCM3006TG6 →

PCM3006T

✅ ড্রপ-ইন
Texas Instruments
📦 24-SSOP
Stereo audio codec IC · 16 bit · Stereo, 2 channels · Stereo ADC and stereo DAC · Single-ended · Single-ended · Delta-sigma modulation · 64 times

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

PCM3006TG6 বিশেষণ

Product Type Stereo audio codec
Converter Resolution 16 bit
Audio Channel Configuration Stereo
Analog Input Type Single-ended
Analog Output Type Single-ended
Digital Interface Serial
সাপ্লাই ভোল্টেজ 3 V
অপারেটিং তাপমাত্রা -25 °C to 85 °C
Modulation Architecture Delta-sigma
Oversampling Rate 64 times
ADC Digital Filter Digital decimation filter
DAC Digital Filter Digital interpolation filter
Package Type 24-SSOP
Package Seated Height 1.45 mm
Package Width 6.00 mm
মাউন্টিং টাইপ Surface mount
RoHS স্ট্যাটাস unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

PCM3006TG6 6.00 mm পিন কনফিগারেশন গাইড

PCM3006TG6 (6.00 mm প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

PCM3006TG6-এর জন্য 6.00 mm প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি PCM3006TG6.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

PCM3006TG6 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Stereo Line-Level Audio Processing, Portable Multimedia Audio, Consumer Audio Appliance, Digital Audio Recording Front End, Industrial Audio Control Module, Two-Channel Audio Monitoring.

🎧

Stereo Line-Level Audio Processing

The PCM3006TG6 fits stereo line-level processing because it combines a 16-bit ADC, a 16-bit DAC, single-ended analog input and output, and a 3 V supply requirement in one 24-SSOP package. The codec uses delta-sigma modulation with 64-times oversampling, while digital decimation and interpolation filters support the conversion paths. An audio subsystem can route left and right analog sources into the ADC, exchange serial digital audio with a controller, and return processed audio through the DAC. The main design consideration is analog scaling: input and output levels must remain within the device's specified range, and the manufacturer reference circuit should guide filtering and bypass-capacitor placement.

📱

Portable Multimedia Audio

The PCM3006TG6 is appropriate for portable multimedia equipment where a 3 V stereo codec with serial connectivity can simplify the audio subsystem. Its 16-bit conversion format supports conventional digital-audio workflows, and the 64-times oversampling architecture is suitable for compact consumer products. Integration of both conversion directions reduces the need for separate ADC and DAC packages, although the final enclosure, display, and audio-output design still determines the achievable sound and power performance. Engineers should preserve the 3 V operating requirement, provide local bypass capacitance, and keep clock and data routing away from sensitive analog input and output nodes.

📺

Consumer Audio Appliance

A consumer audio appliance can use the PCM3006TG6 as a compact stereo conversion engine because it integrates 16-bit ADC and DAC functions with single-ended analog I/O in a 24-SSOP package. The 3 V supply and -25 °C to 85 °C operating range align with many room-temperature consumer and industrial control environments. Its serial interface reduces the number of interconnects to the host controller, while integrated digital filtering supports the signal chain. For a new design, confirm clocking, data alignment, reset timing, and analog reference connections from the manufacturer datasheet rather than treating the codec as a generic audio interface block.

🖥️

Digital Audio Recording Front End

The PCM3006TG6 can serve as the stereo recording front end when a system accepts single-ended analog inputs and needs 16-bit digital audio. Its ADC path uses delta-sigma modulation with 64-times oversampling and a digital decimation filter, providing a defined conversion process before the serial data reaches a processor or storage controller. The input stage should provide controlled signal amplitude and appropriate source impedance, while the PCB should minimize coupling from switching converters, clocks, and digital return currents. Use the manufacturer reference circuit to establish supply bypassing, grounding, and analog trace routing before validating recording noise and dynamic range.

🏭

Industrial Audio Control Module

The PCM3006TG6 is suitable for industrial audio control modules that require a 3 V stereo codec and can accommodate a 24-SSOP package. The stated -25 °C to 85 °C range covers many controlled industrial installations, while the serial interface supports connection to an embedded controller or communications processor. This application benefits from integrating both ADC and DAC functions within a compact package, but electromagnetic isolation becomes important when audio and switching equipment share a board. Keep sensitive analog traces short, provide direct supply bypassing, and use the manufacturer's recommended grounding topology to reduce switching noise and common-mode coupling.

🎥

Two-Channel Audio Monitoring

The PCM3006TG6 can support two-channel monitoring where analog sources must be digitized and a digital audio stream must later be converted back to an analog output. The single-chip combination of stereo ADC and DAC paths supports a compact implementation, and the 16-bit format provides a straightforward interface for digital monitoring software. The -25 °C to 85 °C specification supports controlled monitoring equipment, but the codec does not remove the need for output filtering, gain control, and headroom management. Verify the complete analog signal path against the manufacturer typical application to avoid clipping or insufficient output drive.

What is the PCM3006TG6?
The PCM3006TG6 is a Texas Instruments 16-bit stereo audio codec with single-ended analog inputs and outputs, a serial digital interface, and a 24-SSOP package. According to the Texas Instruments PCM3006 datasheet, it integrates both ADC and DAC functions, uses delta-sigma modulation with 64-times oversampling, and operates from a 3 V supply. It is intended for compact stereo audio systems that exchange digital audio data with a host controller.
What are the key specifications of PCM3006TG6 that engineers should know?
The PCM3006TG6 combines 16-bit resolution, stereo single-ended analog I/O, a serial interface, 3 V operation, and 64-times delta-sigma oversampling in a 24-SSOP package. The Texas Instruments PCM3006 datasheet also identifies digital decimation filters in the ADC path and digital interpolation filters in the DAC path. Its stated operating range is -25 °C to 85 °C, making it appropriate for commercial and industrial consumer audio equipment.
Where can I download the PCM3006TG6 datasheet PDF?
The PCM3006TG6 datasheet PDF is available through the Texas Instruments PCM3006 document listing at the datasheet link on this page. The document identifies the device as a single-ended analog input/output, 16-bit stereo audio codec and provides the detailed application, electrical, and pin information. Use the pin-description table and reference circuit in that document when assigning PCB nets or calculating analog signal levels.
Where is the PCM3006TG6 pinout located?
The PCM3006TG6 pinout is in the pin-description table of the Texas Instruments PCM3006 datasheet. The device uses a 24-SSOP package, and the pin table identifies the power, ground, analog, clock, data, and control connections. Assign every PCB connection from that table rather than relying on a generic SSOP outline, because the analog and serial signal locations determine routing and decoupling requirements.
Is PCM3006TG6 suitable for a 3 V stereo audio design?
Yes, the PCM3006TG6 is specifically suited to a 3 V stereo audio design because its specified supply voltage is 3 V and its analog interface is single-ended stereo. The Texas Instruments PCM3006 datasheet identifies a 16-bit conversion format and 64-times oversampling. The surrounding design must still meet the datasheet's bypass-capacitor, grounding, analog-level, and digital-clock requirements.
What is the difference between PCM3006T and PCM3006TG6?
PCM3006T and PCM3006TG6 belong to the same Texas Instruments PCM3006 stereo codec family and share the 16-bit, single-ended stereo conversion architecture described by the manufacturer. PCM3006TG6 is the 24-SSOP ordering configuration identified in the product listings. The PCM3006T cross-reference listing does not expose every ordering-code detail, so confirm the package suffix, pinout, and ordering information against the datasheet before treating the two as interchangeable.
When should I choose PCM3006TG6 over another stereo audio codec?
Choose the PCM3006TG6 when a design needs a 3 V, 16-bit, single-ended stereo codec in a 24-SSOP package and does not require features outside the PCM3006 feature set. Its integrated ADC, DAC, decimation filter, interpolation filter, and 64-times oversampling make it useful for embedded consumer audio. If a system instead requires a larger bus, different sampling architecture, higher channel count, or a different package, verify those requirements before selecting a substitute.
What can replace PCM3006TG6 without changing the PCB?
The closest identified replacement is the Texas Instruments PCM3006T because it belongs to the same PCM3006 stereo codec family and appears in a direct component cross-reference. PCM3006T is listed as a 16-bit, single-ended analog input/output stereo codec using 64-times oversampling, matching the core conversion architecture. A PCB swap still requires verification of the exact 24-SSOP suffix, pin assignment, electrical limits, and clock configuration.
Is PCM3006TG6 the same as PCM3006T?
PCM3006TG6 and PCM3006T are members of the same Texas Instruments PCM3006 family and share the core 16-bit stereo ADC/DAC architecture with single-ended analog I/O and 64-times oversampling. They should not be treated as automatically identical solely because their base function matches. Confirm the complete orderable suffix, 24-SSOP package construction, pin table, supply requirements, and digital-interface settings in the manufacturer documentation before replacement.
Where can I buy PCM3006TG6 online?
Use the Request a Quote form on this page to ask for PCM3006TG6 availability, lead time, and a quotation for the exact 24-SSOP ordering configuration. The manufacturer information identifies the part as a 3 V, 16-bit stereo audio codec, while distributor listings confirm active market references. For production planning, include your requested quantity, date code requirements, packaging preference, and target delivery schedule in the request.
What is the price of PCM3006TG6?
Use the Request a Quote form on this page for the current PCM3006TG6 price and volume quotation. Pricing can change with quantity, inventory, market conditions, and the exact orderable suffix, so a static price should not be used for budgeting or sourcing approval. State the required quantity and delivery schedule, and request confirmation of the manufacturer part number and package configuration with the quotation.
What is the lead time for PCM3006TG6?
The current lead time for PCM3006TG6 should be confirmed through the Request a Quote form on this page. The part is listed by Texas Instruments and appears in active distributor catalogs, but those references do not guarantee a fixed lead time for a particular order. Include the required quantity, target shipment date, and date-code constraints so the quotation can reflect the actual supply position.
Is PCM3006TG6 in stock?
Stock for PCM3006TG6 is confirmed through the Request a Quote form on this page rather than through a static inventory statement. Distributor listings show market availability, but available quantities can change rapidly and may differ by package suffix. Request a stock confirmation for the exact PCM3006TG6 ordering code and state your required quantity, production date, and acceptable date-code range.
How much power-supply decoupling does PCM3006TG6 require?
The PCM3006TG6 must be decoupled according to the values and connection guidance shown in the Texas Instruments PCM3006 datasheet reference circuit. The verified device data establishes a 3 V supply requirement but does not expose the recommended capacitor quantities, so those values cannot be inferred safely. Place the specified bypass capacitors directly beside their associated pins and keep the supply return path short to reduce impedance and coupling into the analog converters.
Is there a verified cross-brand drop-in equivalent for PCM3006TG6?
No verified cross-brand drop-in equivalent for PCM3006TG6 is identified. The available cross-reference results center on the Texas Instruments PCM3006T and do not establish a competing manufacturer with the same 24-SSOP footprint, pin assignment, electrical limits, and clock interface. A functionally similar audio codec may require a different package or interface, so use the manufacturer cross-reference process and verify the full pinout before considering it a PCB-level replacement.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা PCM3006TG6 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the PCM3006TG6 for a compact, 3 V stereo audio design that needs 16-bit single-ended analog input and output, serial digital connectivity, and integrated ADC and DAC processing. Its 24-SSOP construction, 64-times oversampling, and stated -25 °C to 85 °C range suit controlled consumer, multimedia, and industrial equipment. PCM3006T is the closest same-family candidate because the cross-reference information identifies matching core codec characteristics; use it only after confirming the exact package suffix, pinout, clocking, and ordering details. A competing codec should be selected only if it is documented as pin compatible with the 24-SSOP footprint and provides equivalent electrical, interface, and timing behavior. If the design needs differential audio I/O, a larger word length, a different digital bus, more channels, or a package other than 24-SSOP, choose a different device rather than forcing a board-level substitution.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য PCM3006T
Package 24-SSOP 24-SSOP
Brand Texas Instruments Texas Instruments
Converter Resolution 16 bit 16 bit
Audio Channels Stereo Stereo
Analog Interface Single-ended input and output Single-ended input and output
Digital Interface Serial Serial
Supply Voltage 3 V 3 V
Oversampling Rate 64 times 64 times

মূল পার্থক্যসমূহ

  • Integrated bidirectional stereo conversion (বনামPCM3006T)
  • Low integration count in a compact 24-SSOP (বনামPCM3006T)
  • Direct 3 V system compatibility (বনামPCM3006T)

ডিজাইন নোট

Follow the manufacturer reference circuit for power, ground, analog, and digital connections. Place every required bypass capacitor at the corresponding codec pin rather than at the power-entry point. Keep the 3 V supply trace short and pair it with an uninterrupted return path. The verified information identifies the 24-SSOP package and 1.45 mm seated height but does not expose the required capacitor values, so use the manufacturer datasheet before finalizing the layout.

Separate analog input and output routing from the serial clock and data paths, especially when a switching supply or digital processor is nearby. Route the serial interface over a continuous reference plane and use a ground guard where the layout rules permit it. Keep analog traces short and avoid routing them beneath noisy digital or power-conversion nodes. The single-ended architecture reduces analog connection complexity but increases sensitivity to ground offsets and coupling.

Do not infer the complete pinout, clock mode, sample-rate support, or analog voltage limits from a distributor summary. Use the Texas Instruments PCM3006 datasheet for the exact PCM3006TG6 pin table, timing diagrams, filter characteristics, and application values. Also verify the complete ordering suffix before PCB release: PCM3006T is a same-family candidate, but its suffix-specific package and ordering details must be confirmed against the manufacturer documentation.

Treat the codec serial clock as a timing-sensitive signal. Route clock, data, and control connections consistently, minimize stub branches, and confirm that the host controller supplies the required clock relationship and signal levels. The 64-times oversampling architecture does not remove the need for clean power and quiet analog grounding. Validate the assembled design for serial framing errors, channel offset, distortion, and switching-noise intrusion across the intended input range.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified in the accessible product information. The PCM3006TG6 is a commercial stereo audio codec rather than an AEC-Q100-qualified automotive device.

ডেটা যাচাই করা হয়েছে: 2026-11-20 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

PCM3006TG6 datasheet PCM3006TG6 pinout PCM3006TG6 datasheet pdf PCM3006TG6 equivalent PCM3006TG6 replacement PCM3006TG6 cross reference PCM3006TG6 price PCM3006TG6 stock Texas Instruments PCM3006TG6 PCM3006TG6 24-SSOP PCM3006TG6 16-bit stereo codec PCM3006TG6 vs PCM3006T PCM3006TG6 application circuit PCM3006TG6 audio interface

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments PCM3006TG6 PCM3006T PCM3006 stereo audio codec audio codec analog-to-digital converter digital-to-analog converter delta-sigma modulation 64-times oversampling single-ended analog input single-ended analog output serial digital interface digital decimation filter digital interpolation filter 16-bit converter 24-SSOP SSOP package family surface-mount package 3 V power supply stereo line-level audio multimedia audio industrial audio control RoHS REACH
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন