PCM3006TG6 - 16-Bit Stereo Audio Codec | Texas Instruments
MPN: PCM3006TG6 ✓ Hoạt độngPCM3006TG6 Tóm tắt
An audio codec is an integrated circuit that converts between analog audio signals and a digital data stream. The PCM3006TG6 belongs to the stereo audio codec hierarchy, combining a pair of analog inputs, a pair of analog outputs, delta-sigma ADCs and DACs, digital filters, and a serial host interface. This integration reduces the number of separate converters required in an audio subsystem while retaining a defined path from microphone or line-level input to digital audio data and back to an analog output.
The codec uses delta-sigma modulation with 64-times oversampling for both the ADC and DAC sections. Its ADCs include digital decimation filters, while its DACs include digital interpolation filters. The 16-bit format provides a practical balance between audio resolution, interface bandwidth, and implementation complexity for consumer and embedded stereo systems. The 24-SSOP package also has a stated seated height of 1.45 mm, supporting compact board construction.
The digital connection uses a serial interface, allowing the codec to communicate with a host processor, digital audio controller, or application-specific integrated circuit. Because digital audio data is serialized, the external connection requires fewer signal conductors than a parallel interface. Clocking, data-format selection, reset behavior, and analog routing must be configured consistently with the surrounding controller to prevent framing or timing errors.
Typical uses include stereo line-level processing, multimedia audio conversion, consumer audio appliances, portable equipment, and embedded systems that exchange PCM audio data with a digital processor. The single-ended analog architecture simplifies external signal conditioning compared with a differential implementation, although the application still needs suitable input and output filtering, grounding, and signal-level design.
A critical implementation requirement is to follow the manufacturer datasheet reference circuit for analog, digital, and power connections. Place the required bypass capacitors close to their supply pins, keep analog and digital return paths disciplined, and treat the codec interface traces as timing-sensitive clock and data routes. Adequate analog headroom and correct input or output scaling are necessary to prevent distortion and clipping.
This product page combines the Texas Instruments codec specifications with package details, sourcing guidance, application-focused design notes, and a verified same-family replacement reference. It is intended to help engineers assess the PCM3006TG6 for an existing 3 V stereo audio design before committing to a PCB or production release.
Bộ thay thế dễ dàng lắp đặt cho PCM3006TG6 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PCM3006TG6 (cùng hình factor và footprint) — khác nhau ở AEC-Q100 Qualification, Product Type.
PCM3006T
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PCM3006TG6 Thông số kỹ thuật
| Product Type | Stereo audio codec |
| Converter Resolution | 16 bit |
| Audio Channel Configuration | Stereo |
| Analog Input Type | Single-ended |
| Analog Output Type | Single-ended |
| Digital Interface | Serial |
| Điện áp cung cấp | 3 V |
| Nhiệt độ hoạt động | -25 °C to 85 °C |
| Modulation Architecture | Delta-sigma |
| Oversampling Rate | 64 times |
| ADC Digital Filter | Digital decimation filter |
| DAC Digital Filter | Digital interpolation filter |
| Package Type | 24-SSOP |
| Package Seated Height | 1.45 mm |
| Package Width | 6.00 mm |
| Kiểu lắp đặt | Surface mount |
| Trạng thái RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
Hướng dẫn cấu hình chân PCM3006TG6 6.00 mm
Cấu hình chân cho PCM3006TG6 (6.00 mm gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho PCM3006TG6.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PCM3006TG6 phù hợp cho 6 Áp dụngs: Stereo Line-Level Audio Processing, Portable Multimedia Audio, Consumer Audio Appliance, Digital Audio Recording Front End, Industrial Audio Control Module, Two-Channel Audio Monitoring.
Stereo Line-Level Audio Processing
The PCM3006TG6 fits stereo line-level processing because it combines a 16-bit ADC, a 16-bit DAC, single-ended analog input and output, and a 3 V supply requirement in one 24-SSOP package. The codec uses delta-sigma modulation with 64-times oversampling, while digital decimation and interpolation filters support the conversion paths. An audio subsystem can route left and right analog sources into the ADC, exchange serial digital audio with a controller, and return processed audio through the DAC. The main design consideration is analog scaling: input and output levels must remain within the device's specified range, and the manufacturer reference circuit should guide filtering and bypass-capacitor placement.
Được đề xuất
Portable Multimedia Audio
The PCM3006TG6 is appropriate for portable multimedia equipment where a 3 V stereo codec with serial connectivity can simplify the audio subsystem. Its 16-bit conversion format supports conventional digital-audio workflows, and the 64-times oversampling architecture is suitable for compact consumer products. Integration of both conversion directions reduces the need for separate ADC and DAC packages, although the final enclosure, display, and audio-output design still determines the achievable sound and power performance. Engineers should preserve the 3 V operating requirement, provide local bypass capacitance, and keep clock and data routing away from sensitive analog input and output nodes.
Được đề xuất
Consumer Audio Appliance
A consumer audio appliance can use the PCM3006TG6 as a compact stereo conversion engine because it integrates 16-bit ADC and DAC functions with single-ended analog I/O in a 24-SSOP package. The 3 V supply and -25 °C to 85 °C operating range align with many room-temperature consumer and industrial control environments. Its serial interface reduces the number of interconnects to the host controller, while integrated digital filtering supports the signal chain. For a new design, confirm clocking, data alignment, reset timing, and analog reference connections from the manufacturer datasheet rather than treating the codec as a generic audio interface block.
Được đề xuất
Digital Audio Recording Front End
The PCM3006TG6 can serve as the stereo recording front end when a system accepts single-ended analog inputs and needs 16-bit digital audio. Its ADC path uses delta-sigma modulation with 64-times oversampling and a digital decimation filter, providing a defined conversion process before the serial data reaches a processor or storage controller. The input stage should provide controlled signal amplitude and appropriate source impedance, while the PCB should minimize coupling from switching converters, clocks, and digital return currents. Use the manufacturer reference circuit to establish supply bypassing, grounding, and analog trace routing before validating recording noise and dynamic range.
Được đề xuất
Industrial Audio Control Module
The PCM3006TG6 is suitable for industrial audio control modules that require a 3 V stereo codec and can accommodate a 24-SSOP package. The stated -25 °C to 85 °C range covers many controlled industrial installations, while the serial interface supports connection to an embedded controller or communications processor. This application benefits from integrating both ADC and DAC functions within a compact package, but electromagnetic isolation becomes important when audio and switching equipment share a board. Keep sensitive analog traces short, provide direct supply bypassing, and use the manufacturer's recommended grounding topology to reduce switching noise and common-mode coupling.
Được đề xuất
Two-Channel Audio Monitoring
The PCM3006TG6 can support two-channel monitoring where analog sources must be digitized and a digital audio stream must later be converted back to an analog output. The single-chip combination of stereo ADC and DAC paths supports a compact implementation, and the 16-bit format provides a straightforward interface for digital monitoring software. The -25 °C to 85 °C specification supports controlled monitoring equipment, but the codec does not remove the need for output filtering, gain control, and headroom management. Verify the complete analog signal path against the manufacturer typical application to avoid clipping or insufficient output drive.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PCM3006TG6 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PCM3006T |
|---|---|---|
| Package | 24-SSOP | 24-SSOP |
| Brand | Texas Instruments | Texas Instruments |
| Converter Resolution | 16 bit | 16 bit |
| Audio Channels | Stereo | Stereo |
| Analog Interface | Single-ended input and output | Single-ended input and output |
| Digital Interface | Serial | Serial |
| Supply Voltage | 3 V | 3 V |
| Oversampling Rate | 64 times | 64 times |
Bảo phân biệt quan trọng
- Integrated bidirectional stereo conversion (vsPCM3006T)
- Low integration count in a compact 24-SSOP (vsPCM3006T)
- Direct 3 V system compatibility (vsPCM3006T)
Ghi chú thiết kế
Follow the manufacturer reference circuit for power, ground, analog, and digital connections. Place every required bypass capacitor at the corresponding codec pin rather than at the power-entry point. Keep the 3 V supply trace short and pair it with an uninterrupted return path. The verified information identifies the 24-SSOP package and 1.45 mm seated height but does not expose the required capacitor values, so use the manufacturer datasheet before finalizing the layout.
Separate analog input and output routing from the serial clock and data paths, especially when a switching supply or digital processor is nearby. Route the serial interface over a continuous reference plane and use a ground guard where the layout rules permit it. Keep analog traces short and avoid routing them beneath noisy digital or power-conversion nodes. The single-ended architecture reduces analog connection complexity but increases sensitivity to ground offsets and coupling.
Do not infer the complete pinout, clock mode, sample-rate support, or analog voltage limits from a distributor summary. Use the Texas Instruments PCM3006 datasheet for the exact PCM3006TG6 pin table, timing diagrams, filter characteristics, and application values. Also verify the complete ordering suffix before PCB release: PCM3006T is a same-family candidate, but its suffix-specific package and ordering details must be confirmed against the manufacturer documentation.
Treat the codec serial clock as a timing-sensitive signal. Route clock, data, and control connections consistently, minimize stub branches, and confirm that the host controller supplies the required clock relationship and signal levels. The 64-times oversampling architecture does not remove the need for clean power and quiet analog grounding. Validate the assembled design for serial framing errors, channel offset, distortion, and switching-noise intrusion across the intended input range.
Thông tin tuân thủ
RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified in the accessible product information. The PCM3006TG6 is a commercial stereo audio codec rather than an AEC-Q100-qualified automotive device.