Texas Instruments

TAS5182IDCA - 100W Stereo Class-D Audio Controller

MPN: TAS5182IDCA ✗ জীবনকালের সমাপ্তি
56-pin HTSSOP Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

TAS5182IDCA সারাংশ

The Texas Instruments TAS5182IDCA is a stereo digital amplifier power-stage controller rated for 2 × 100 W RMS output at 6 V in bridge-tied-load (BTL) configurations. The device provides two-channel Class-D control, supports external discrete MOSFET output stages, and is packaged in a 56-pin HTSSOP. Its typical total harmonic distortion plus noise is below 0.15% at 1 kHz, making it suitable for high-power home-theater and powered-subwoofer systems.

A digital amplifier power-stage controller is an integrated circuit that interprets an audio input and generates gate-drive signals for external switching MOSFETs. Unlike a conventional analog audio power amplifier, the TAS5182IDCA places the high-voltage and high-current switching function in discrete transistors. This separates signal processing from power conversion, allowing the external MOSFET stage to determine much of the amplifier's voltage, current, thermal, and output-power capability. The controller therefore belongs to the Class-D amplifier, digital audio amplifier, power-management IC, and semiconductor hierarchy.

The 2 × 100 W capability at 6 V describes controller-supported BTL operation rather than the output of an integrated monolithic power stage. Engineers must select suitable N-channel power MOSFETs, a power-supply arrangement, an output filter, and a thermal design that match the target impedance and enclosure. The low typical distortion figure makes the controller appropriate for music reproduction systems where audible waveform deviation should remain low across the audio band.

The TAS5182 architecture is intended to work with discrete bridge-tied-load output stages. In each half-bridge, the controller drives the gates of the high-side and low-side MOSFETs with complementary signals. External LC output filtering converts the switched full-bridge waveform into a filtered analog output capable of driving a loudspeaker through a BTL network. Correct gate voltage, dead time, switching speed, and layout continuity are therefore essential to the controller's real-world performance.

Typical uses include home-theater amplifiers, powered subwoofers, active loudspeakers, compact stereo systems, and other high-power Class-D audio products. The controller can also serve multi-channel systems when each stereo pair is assigned to separate channels. Compared with a monolithic amplifier, the discrete-MOSFET approach offers greater freedom in output-device selection, thermal partitioning, and power scaling, but it also increases design complexity and EMI sensitivity.

PCB implementation requires short gate-drive loops, careful high-current return paths, a continuous output-filter ground reference, and separation between sensitive input and switching nodes. Place input, supply, and compensation components close to their associated pins. Use thermal vias beneath exposed-pad structures where applicable and verify the selected MOSFETs, inductor, and capacitor ratings against the intended 6 V BTL operating point. EMI filtering must be evaluated together with the switching layout rather than added only after enclosure testing.

This product page combines the controller's verified power and distortion ratings with package information, application guidance, drop-in family comparisons, and practical PCB design notes. It is intended to accelerate engineering selection while making the system-level responsibilities of an external-MOSFET Class-D output stage explicit.

এর জন্য ড্রপ-ইন বিকল্প TAS5182IDCA — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible TAS5182IDCA (একই form factor এবং footprint) — পার্থক্য রয়েছে Mounting Type, Package, Product Type, Output Configuration, Typical THD+N.

Texas Instruments
Output Configuration: Stereo H-bridge controller
Typical THD+N: < 0.15% under specified manufacturer test conditions
এর সাথে তুলনা করুন TAS5182IDCA →
Texas Instruments
Mounting Type: Surface-mount SMD
Package: 56-pin HTSSOP with exposed pad
Product Type: Digital amplifier power-stage controller
এর সাথে তুলনা করুন TAS5182IDCA →

TAS5182IDCAG4

✅ ড্রপ-ইন
📦 56-pin HTSSOP
Same 100 W-per-channel controller platform and 56-pin footprint; ordering suffix differs with no quantified core power difference

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

TAS5182IDCARG4

✅ ড্রপ-ইন
📦 56-pin HTSSOP
Same 100 W-per-channel controller platform and terminal arrangement; G4 ordering suffix differs

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

TAS5182DCAG4

✅ ড্রপ-ইন
📦 56-pin HTSSOP
Same TAS5182 stereo Class-D controller family and 56-pin package; I-series versus D-series ordering suffix

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

TAS5182DCAR

✅ ড্রপ-ইন
Texas Instruments
📦 56-pin HTSSOP
Digital amplifier power-stage controller · Class D · 2 channels · 100 W per channel at 6 ohms · 200 W for stereo operation · 6 ohms · Discrete bridge-tied-load MOSFET output stage · Digital input

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

TAS5182DCA

✅ ড্রপ-ইন
Texas Instruments
📦 56-pin HTSSOP
Stereo digital amplifier power-stage controller · Class D · 2 channels · 100 W per channel at 6 Ω · 200 W · 0 V to 34 V · PWM input · Stereo H-bridge controller

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

TAS5182IDCA সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type Stereo digital amplifier power-stage controller
Amplifier Class Class D
Channel Count 2 channels
আউটপুট কনফিগারেশন Bridge-tied load (BTL)
Maximum Rated Stereo Output Power 2 × 100 W RMS at 6 V
Power per Channel Up to 100 W RMS at 6 V
Typical THD+N < 0.15% at 1 kHz
Output Stage External discrete MOSFET bridge-tied-load stage
প্যাকেজ 56-pin HTSSOP
পিন সংখ্যা 56 pins
মাউন্টিং টাইপ Surface mount

TAS5182IDCA 56-pin htssop পিন কনফিগারেশন গাইড

TAS5182IDCA (56-pin htssop প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

TAS5182IDCA-এর জন্য 56-pin htssop প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি TAS5182IDCA.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

TAS5182IDCA এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Home-Theater Stereo Power Amplifier, Powered Subwoofer Amplifier, Active Loudspeaker, Multi-Channel Audio Amplifier, Compact Hi-Fi Power Stage, Professional Audio Power Module.

🎧

Home-Theater Stereo Power Amplifier

TAS5182IDCA fits a two-channel home-theater power amplifier built around external MOSFET output stages. Its controller platform supports up to 100 W RMS per channel at 6 V in bridge-tied-load operation, while typical THD+N below 0.15% at 1 kHz provides a useful starting point for low-distortion music amplification. The design requires complementary gate drives, carefully selected power MOSFETs, an LC speaker-output filter, and a supply rated for the target output. Keeping those power components outside the controller permits flexible thermal sizing and PCB partitioning. However, the engineer must validate the complete loop because PCB inductance, filter response, MOSFET switching behavior, and speaker impedance determine the final performance.

🔊

Powered Subwoofer Amplifier

TAS5182IDCA can control a high-power stereo subwoofer output stage when the amplifier uses a 6 V BTL arrangement and external N-channel MOSFETs. The two channels provide flexibility for balanced or parallel speaker drives, and the controller's 100 W-per-channel rating allows substantial continuous output when the supply and thermal design support it. Typical THD+N below 0.15% at 1 kHz is valuable for reproducing low-frequency musical content with low waveform error. In practice, the output inductor must be selected for the intended speaker impedance, the DC blocking and EMI network must be stable, and the MOSFET switching transitions must remain thermally manageable.

🔊

Active Loudspeaker

TAS5182IDCA is suitable for an active stereo loudspeaker because it controls two external MOSFET bridges and can support up to 100 W RMS per channel at 6 V. The controller approach allows the amplifier board to be tailored around the selected loudspeaker impedance rather than accepting the thermal limits of a monolithic output stage. Audio input conditioning, gain setting, protection, and crossover functions can be integrated around the controller in the signal path. The major engineering trade-off is increased switching-stage complexity: power-MOSFET selection, gate resistance, output filtering, thermal vias, and EMI control all require careful implementation to preserve the low typical distortion of the controller platform.

🏠

Multi-Channel Audio Amplifier

TAS5182IDCA can form the basis of a multi-channel amplifier by assigning each stereo controller section to a separate pair of amplification channels. Its two-channel architecture supports compact implementations of surround-sound or multi-zone audio products, while the external-MOSFET configuration permits output power and thermal performance to be scaled for each board. At the system level, each controller still requires its own output filters and protection strategy, while shared supplies must account for the combined switching and thermal load. The low typical THD+N figure below 0.15% at 1 kHz supports high-fidelity reproduction, but channel-to-channel matching and inter-channel EMI should be checked using the final analog and power layouts.

🎵

Compact Hi-Fi Power Stage

TAS5182IDCA is appropriate for a compact high-fidelity power stage when discrete MOSFETs are used to separate amplification current from the controller's signal-processing function. Supporting up to 100 W RMS per channel at 6 V gives the designer room to match different speaker sensitivities and enclosure limits, while typical THD+N below 0.15% at 1 kHz provides a useful distortion baseline. Component value selection, bootstrap or supply circuitry, and protection thresholds must be matched to the chosen MOSFETs. Thermal performance depends on copper area, thermal vias, airflow, and the operating duty cycle, so a nominal controller rating alone should not be treated as a guaranteed continuous output for every enclosure.

🎙️

Professional Audio Power Module

TAS5182IDCA can serve as the control element in a professional-audio power module when the external MOSFET bank, transformer or supply system, output network, and protection circuitry are designed for professional loads. The 2 × 100 W RMS capability at 6 V and typical THD+N below 0.15% at 1 kHz provide a strong basis for a high-efficiency Class-D module. Because the controller does not contain the power transistors, designers can select devices according to voltage, current, SOA, and thermal requirements rather than accepting a fixed integrated output stage. Practical deployment still requires acoustic and electrical safety review, output DC-offset protection, robust grounding, and thermal validation under sustained program material.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

TAS5086DBTR Texas Instruments ব্যবহৃত হয়: Home-Theater Stereo Power Amplifier, Active Loudspeaker, Professional Audio Power Module TAS5182IDCAG4 Drop-in ordering-family alternative ব্যবহৃত হয়: Home-Theater Stereo Power Amplifier, Multi-Channel Audio Amplifier TAS5182DCA Texas Instruments ব্যবহৃত হয়: Powered Subwoofer Amplifier, Compact Hi-Fi Power Stage TAS5182IDCARG4 Pin-compatible ordering-family option ব্যবহৃত হয়: Powered Subwoofer Amplifier, Compact Hi-Fi Power Stage TAS5182DCAG4 Same-package controller alternative ব্যবহৃত হয়: Active Loudspeaker, Professional Audio Power Module TAS5182DCAR Texas Instruments ব্যবহৃত হয়: Multi-Channel Audio Amplifier
What is the TAS5182IDCA?
The TAS5182IDCA is a Texas Instruments stereo digital amplifier power-stage controller for two external MOSFET bridge-tied-load output stages. It supports up to 100 W RMS per channel at a 6 V supply and operates as a Class-D audio controller rather than integrating the output transistors. The device is offered in a 56-pin HTSSOP package, according to the manufacturer datasheet.
How much power can TAS5182IDCA deliver?
TAS5182IDCA supports 2 × 100 W RMS stereo output at 6 V in a bridge-tied-load configuration. This is the power capability of a properly designed external-MOSFET output stage controlled by the IC, not an on-chip 100 W amplifier. The final achievable power also depends on the selected MOSFETs, supply capability, output filter, PCB thermal design, speaker impedance, and enclosure cooling.
What is the distortion of TAS5182IDCA?
The typical THD+N of TAS5182IDCA is below 0.15% at 1 kHz. The manufacturer datasheet identifies this figure for its 100 W stereo digital amplifier power-stage controller configuration. Actual system distortion will also reflect the external MOSFETs, output filter, supply design, PCB parasitics, and the selected load, so those components should be evaluated in the complete amplifier.
Does TAS5182IDCA include the speaker output transistors?
No, TAS5182IDCA is a power-stage controller and requires external discrete MOSFETs. Each amplifier channel uses a bridge-tied-load arrangement driven by the controller. This architecture separates low-level signal processing from the high-voltage switching function, allowing the output transistors to be selected for the required current, voltage, dissipation, and thermal conditions.
Where can I download the TAS5182IDCA datasheet PDF?
The TAS5182IDCA datasheet PDF can be found through the Texas Instruments product documentation or the manufacturer datasheet archive linked on this page. The document contains the detailed electrical characteristics, application circuit, external-MOSFET recommendations, output-filter requirements, pin descriptions, and thermal information. Use the manufacturer document as the controlling reference when assigning pins or finalizing the power stage.
Where can I find the TAS5182IDCA pinout?
The TAS5182IDCA pinout is defined in the pin-configuration section of the manufacturer datasheet for the 56-pin HTSSOP package. Use that diagram when assigning supplies, analog inputs, gate-drive outputs, communication signals, ground connections, and exposed thermal structures. The package drawing should be checked against the exact PCB footprint rather than inferred from a generic 56-pin land pattern.
TAS5182IDCA vs TAS5182IDCAG4 - which is the better replacement?
TAS5182IDCAG4 is identified as a complete replacement for TAS5182IDCA because its terminals and package are consistent with the original part. Both belong to the same 56-pin controller family and are suitable for existing stereo Class-D designs. Confirm the ordering suffix, package drawing, pin assignments, and electrical limits against the manufacturer documentation before approving a substitution.
When should I choose TAS5182IDCA over TAS5182DCAR?
Choose TAS5182IDCA when the design specifically requires the I-series device ordering option, while TAS5182DCAR may be appropriate for the non-I ordering family. Both are associated with the 56-pin stereo Class-D controller platform, but suffix differences can represent ordering, temperature, packaging, or qualification distinctions. Verify the suffix-specific ordering table and intended operating conditions before treating them as interchangeable.
Can TAS5182DCA replace TAS5182IDCA?
TAS5182DCA may serve as a family-level drop-in option because it uses the same 56-pin TAS5182 controller platform and shares the core function of driving external bridge-tied-load MOSFET stages. Compatibility still depends on the exact ordering suffix, exposed-pad requirements, electrical limits, and operating-temperature designation. Review the suffix-specific comparison and manufacturer pin table before substitution.
What is the best drop-in replacement for TAS5182IDCA?
TAS5182IDCAG4 is the closest documented drop-in choice for TAS5182IDCA because the comparison identifies consistent terminals, package, performance, and functional characteristics. The device can therefore replace TAS5182IDCA without modifying the PCB footprint, subject to final operating-condition and suffix verification. No cross-brand equivalent is established by the available manufacturer information.
Is TAS5182IDCA suitable for a powered subwoofer?
TAS5182IDCA is suitable for a powered subwoofer when the external MOSFET stage, supply, output filter, and PCB are designed for the selected speaker impedance. Its 2 × 100 W RMS capability at 6 V can support a high-power stereo subwoofer amplifier, while the two independent channels may also be used as a mono parallel or balanced output arrangement. The thermal and filter design must match the actual amplifier topology.
How should the TAS5182IDCA Class-D output filter be designed?
Design the TAS5182IDCA output filter for the selected MOSFET switching behavior, speaker impedance, target bandwidth, and allowable phase shift. Place the inductor and filter capacitor close to the power stage and maintain a low-impedance return path to the controller ground. Validate the filter with the final PCB because switching-node inductance can materially alter attenuation, damping, and EMI performance.
What layout practices are important for TAS5182IDCA?
Keep gate-drive traces short, symmetrical, and referenced closely to their source connections so switching transients do not disturb analog inputs or control circuitry. Use a solid ground plane, minimize high-current loop area, and keep the exposed thermal pad connected to the required copper and thermal structures. Separate the switched output nodes from audio inputs and place output-filter components near the external MOSFET bridge.
Where can I buy TAS5182IDCA and check its lead time?
Use the Request a Quote form on this page to request TAS5182IDCA availability, current lead time, minimum order quantity, and the appropriate 56-pin HTSSOP packaging option. Quote requests let the sourcing team confirm lifecycle status and supply without relying on a static listing. For production planning, request the current manufacturer ordering information as well as a committed delivery schedule.
What are the key specifications of TAS5182IDCA that engineers should know?
TAS5182IDCA is a two-channel Class-D digital amplifier power-stage controller in a 56-pin HTSSOP package. According to the manufacturer datasheet, it supports 2 × 100 W RMS output at 6 V in bridge-tied-load operation and has typical THD+N below 0.15% at 1 kHz. It controls external discrete MOSFETs, so final output power, thermal performance, and EMI depend on the complete external power stage.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা TAS5182IDCA — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose TAS5182IDCA for a stereo Class-D power stage that requires external N-channel MOSFETs, bridge-tied-load operation, and up to 100 W RMS per channel at 6 V. It is especially useful when the designer wants independent control of output-device selection, thermal distribution, and supply architecture. Choose TAS5182IDCAG4 when that documented ordering-family variant matches the required temperature, packaging, or qualification conditions without changing the PCB. Consider TAS5182IDCARG4, TAS5182DCAG4, TAS5182DCAR, or TAS5182DCA when their suffix-specific ordering conditions fit the design and the manufacturer confirms terminal equivalence. TAS5086DBTR represents a different digital amplifier controller architecture rather than a direct same-family substitution. In every case, evaluate the complete external MOSFET bridge, output filter, supply, thermal design, and EMI behavior; the controller's 2 × 100 W and 0.15% THD+N figures are not substitutes for validating the finished amplifier.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য TAS5182IDCAG4 TAS5182IDCARG4 TAS5182DCAG4 TAS5182DCAR TAS5182DCA
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 56-pin HTSSOP 56-pin HTSSOP 56-pin HTSSOP 56-pin HTSSOP 56-pin HTSSOP 56-pin HTSSOP
Product Type Stereo digital amplifier power-stage controller Stereo digital amplifier power-stage controller Stereo digital amplifier power-stage controller Stereo digital amplifier power-stage controller Stereo digital amplifier power-stage controller Stereo digital amplifier power-stage controller
Amplifier Class Class D Class D Class D Class D Class D Class D
Channel Count 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels
Output Configuration Bridge-tied load (BTL) Bridge-tied load (BTL) Bridge-tied load (BTL) Bridge-tied load (BTL) Bridge-tied load (BTL) Bridge-tied load (BTL)
Rated Stereo Output Power 2 × 100 W RMS at 6 V 2 × 100 W RMS at 6 V 2 × 100 W RMS at 6 V 2 × 100 W RMS at 6 V 2 × 100 W RMS at 6 V 2 × 100 W RMS at 6 V
Typical THD+N < 0.15% at 1 kHz < 0.15% at 1 kHz < 0.15% at 1 kHz < 0.15% at 1 kHz < 0.15% at 1 kHz < 0.15% at 1 kHz
External MOSFET Output Stage Required Required Required Required Required Required
Ordering Suffix IDCA IDCAG4 IDCARG4 DCAG4 DCAR DCA

মূল পার্থক্যসমূহ

  • Supports two high-power channels from one controller (বনামTAS5086DBTR)
  • Documented complete ordering-family replacement (বনামTAS5182IDCAG4)
  • Low typical audio-band distortion for external-MOSFET architecture (বনামTAS5182DCAR)
  • External power-device flexibility (বনামTAS5086DBTR)

ডিজাইন নোট

Keep each gate-drive loop compact and route the controller ground reference close to the external MOSFET source connections. Long gate traces and shared high-current return paths can increase switching transients, ringing, and distortion. Use symmetrical routing for the two half-bridges, maintain adequate spacing from sensitive analog inputs, and cross-check the 56-pin land pattern against the exact package drawing before releasing artwork.

The 2 × 100 W RMS rating at 6 V applies to a complete external-MOSFET BTL design. Select the supply, MOSFETs, output inductor, and capacitors for the intended speaker impedance rather than using the controller rating alone. Account for continuous real-world dissipation, amplifier efficiency, transient headroom, and protection behavior. Validate the assembled amplifier at the target load because PCB and thermal limitations can reduce practical output below the nominal rating.

The controller's primary thermal challenge depends on the selected external devices and the copper area connected to exposed structures. Provide thermal vias and uninterrupted copper beneath the package where the manufacturer land pattern calls for them, then size the MOSFET heat spreading around each output bridge. Use estimated junction-temperature calculations from the actual dissipation, thermal resistance, and ambient temperature before increasing output power or reducing enclosure ventilation.

Treat switched output nodes as high-voltage, high-current EMI sources even though the controller itself does not contain the output transistors. Keep the output-filter components close to the power bridge, minimize the switched-node area, and maintain a clean return reference for the analog input and control circuitry. Evaluate conducted and radiated emissions after the MOSFET gates, output network, protective elements, and enclosure are finalized.

Do not interpret 100 W per channel as a guaranteed speaker output independent of load impedance. The BTL topology, speaker impedance, output filter, supply voltage, and MOSFET dissipation determine usable power and stability. Also verify that any replacement uses the correct exposed-pad and thermal requirements; a matching 56-pin outline alone does not guarantee that every footprint feature and electrical condition is interchangeable.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The TAS5182 is an audio power-stage controller for consumer and industrial equipment, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified. AEC-Q100 is not applicable to the standard TAS5182IDCA ordering option.

ডেটা যাচাই করা হয়েছে: 2026-11-15 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

TAS5182IDCA datasheet TAS5182IDCA pinout TAS5182IDCA datasheet pdf TAS5182IDCA schematic TAS5182IDCA equivalent TAS5182IDCA replacement TAS5182IDCA vs TAS5182IDCAG4 TAS5182IDCA footprint TAS5182IDCA application circuit Texas Instruments TAS5182IDCA TAS5182IDCA 100W stereo amplifier TAS5182IDCA price

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments TAS5182IDCA TAS5182IDCAG4 TAS5182IDCARG4 TAS5182DCAG4 TAS5182DCAR TAS5182DCA TAS5086DBTR Class-D amplifier digital amplifier power-stage controller power-management IC semiconductor bridge-tied load external MOSFET output stage PurePath technology THD+N 100 W stereo output 6 V supply 56-pin HTSSOP surface-mount package home-theater amplifier powered subwoofer active loudspeaker audio power module output-filter network
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন