Texas Instruments

THS1230IDW - 12-Bit 30 MSPS Single-Channel ADC | Texas Instruments

MPN: THS1230IDW ✓ সক্রিয়
3.3 V Vdss 28-pin SOIC Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

THS1230IDW সারাংশ

The Texas Instruments THS1230IDW is a 12-bit, single-channel, 30 MSPS pipelined parallel-output analog-to-digital converter packaged in a 28-pin SOIC. Its principal operating points are a 3.3 V supply, a 30 megasample-per-second conversion rate, and a 12-bit resolution, with a stated analog input range from -2 V to +2 V.

An analog-to-digital converter, or ADC, converts a continuously varying analog voltage into a numeric value for processing, measurement, transmission, or control. The THS1230 belongs to the pipelined ADC family, whose multistage architecture supports high sampling rates while producing a parallel digital result. The single analog input and parallel 12-bit output place it between high-speed waveform conversion and lower-speed instrumentation, communications, or industrial signal-processing systems.

Key characteristics include 30 MSPS throughput, 12-bit resolution, one analog input, 3.3 V operation, and a -2 V to +2 V analog input range. The listed linearity error is 0.0488%. Its parallel interface exposes the conversion result through dedicated digital output pins, avoiding a serial-data link and allowing the converter to feed parallel logic, digital buses, or downstream processing stages when timing and interface requirements are compatible.

The device uses a proprietary pipelined conversion method and CMOS implementation. A 28-pin SOIC places the converter in a surface-mount package with gull-wing leads. Because the interface is parallel rather than serial, PCB routing requires multiple data traces and careful clock-to-data timing review. Designers should also evaluate analog input bandwidth, source impedance, settling behavior, clock jitter, reference accuracy, and output timing against the specific signal bandwidth before fixing the system sampling rate.

Typical uses include high-speed signal digitization, communications receivers, industrial monitoring, test and measurement equipment, control-loop sampling, and embedded systems that require 12-bit resolution at rates up to 30 MSPS. The 30 MSPS capability is particularly relevant when the input contains high-frequency content, provided that the analog front end limits bandwidth, preserves signal integrity, and supplies the converter with a suitably settled waveform.

A key design consideration is that a nominal 30 MSPS sampling rate does not guarantee useful full-scale bandwidth in every application. Keep analog traces short, use a controlled ground reference, place input and reference components close to their associated pins, and route the digital data bus away from sensitive analog nodes. Review clock jitter and acquisition timing whenever the source impedance or input frequency increases.

This page organizes the available electrical, packaging, lifecycle, sourcing, replacement, and application information for engineers evaluating the THS1230IDW. It also distinguishes verified drop-in alternatives from parts that require a different footprint, helping PCB and procurement decisions remain grounded in package, resolution, interface, and sampling-rate constraints.

এর জন্য ড্রপ-ইন বিকল্প THS1230IDW — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible THS1230IDW (একই form factor এবং footprint) — পার্থক্য রয়েছে Architecture, Operating Temperature, Package, Resolution, Number of Channels.

Texas Instruments
Architecture: Pipelined / multi-stage with digital error correction
Operating Temperature: 0 °C to +70 °C (C-grade commercial)
Package: 28-pin SOIC (DW), 7.50 mm body width, tape and reel
এর সাথে তুলনা করুন THS1230IDW →
Texas Instruments
Architecture: Pipelined, multi-stage
Resolution: 12 bits
Number of Channels: 1
এর সাথে তুলনা করুন THS1230IDW →
Texas Instruments
Operating Temperature: -40 C to +85 C
Package: 28-SOIC (DW), 0.295 inch (7.50 mm) width
Resolution: 12 bits
এর সাথে তুলনা করুন THS1230IDW →
Texas Instruments
Architecture: Pipelined
Operating Temperature: 0C to +70C
Number of Channels: 1
এর সাথে তুলনা করুন THS1230IDW →

THS1230CDW

✅ ড্রপ-ইন
Texas Instruments
📦 28-pin SOIC
12 bits · 30 MSPS · 1 · 3.3 V (single supply) · Pipelined / multi-stage with digital error correction · Configurable: single-ended, single-ended with offset, or differential

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

THS1230IDW সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Converter Type Pipelined ADC
রেজোলিউশন 12 bit
Number of Channels 1 channel
Number of Inputs 1 input
স্যাম্পলিং রেট 30 MSPS
সাপ্লাই ভোল্টেজ 3.3 V
Analog Input Range -2 V to +2 V
Integral Linearity Error 0.0488%
Output Interface 12-bit parallel
Conversion Architecture Proprietary method
Technology CMOS
প্যাকেজ 28-pin SOIC
Package Code PDSO28
Terminal Count 28 terminals
Terminal Form Gull wing
Package Shape Rectangular
Temperature Grade Industrial
মাউন্টিং টাইপ Surface mount

THS1230IDW rectangular পিন কনফিগারেশন গাইড

THS1230IDW (rectangular প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

THS1230IDW-এর জন্য rectangular প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি THS1230IDW.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

THS1230IDW এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Communications Receiver Signal Digitization, Industrial Process Monitoring, Test and Measurement Acquisition, Industrial Control Loop Sampling, Power and Motor Signal Monitoring, Embedded Parallel Data Acquisition.

🌐

Communications Receiver Signal Digitization

The THS1230IDW fits communications receiver designs that require rapid conversion into a parallel digital word. Its 12-bit resolution and 30 MSPS sampling rate provide 300 million sample points per second across a single analog channel, while the 3.3 V supply simplifies integration with contemporary digital logic. According to the manufacturer datasheet, the input range is -2 V to +2 V. The receiver should place appropriate gain and filtering ahead of the ADC, control clock jitter, and verify that the analog front end can drive the converter without introducing excessive settling error or distortion.

🏭

Industrial Process Monitoring

The THS1230IDW can digitize rapidly changing industrial sensor signals when deterministic sampling and a 12-bit parallel result are more useful than a low-speed serial interface. The 30 MSPS conversion capability provides ample timing margin for many monitoring channels after multiplexing, and the industrial temperature-grade designation supports use in demanding equipment. According to the manufacturer datasheet, the converter operates from 3.3 V with an analog input range of -2 V to +2 V. Protection, isolation, input conditioning, and grounding must be designed around the selected sensor and industrial environment.

🔧

Test and Measurement Acquisition

The THS1230IDW is suitable for compact test and measurement instruments that acquire a single analog waveform and process it through parallel digital logic or an FPGA. Its 12-bit resolution balances numerical detail against a 30 MSPS conversion rate, and the 28-pin SOIC package supports conventional surface-mount assembly. According to the manufacturer datasheet, the analog input range is -2 V to +2 V and the listed linearity error is 0.0488%. Instrument design should include calibration, stable references, input attenuation, bandwidth control, and a clock with low enough jitter for the target measurement accuracy.

🏭

Industrial Control Loop Sampling

The THS1230IDW can support high-speed control-loop sampling where a controller must observe a rapidly changing analog condition and retain the result as a 12-bit digital value. The 30 MSPS pipelined conversion rate provides substantially more sampling opportunities than slow-cycle acquisition systems, while parallel output can connect to a fast digital controller without relying on a serial protocol. According to the manufacturer datasheet, the device operates from 3.3 V. Designers must account for control-loop latency, anti-alias filtering, converter acquisition time, and the electrical limits of the selected processor interface.

⚡

Power and Motor Signal Monitoring

The THS1230IDW is applicable to laboratory or industrial systems that monitor power, current, or motor-control waveforms requiring rapid sampling. A single channel operating at up to 30 MSPS can capture transient behavior when the input network provides safe attenuation and the required bandwidth. According to the manufacturer datasheet, the converter accepts a -2 V to +2 V analog range and operates from 3.3 V. Protection components must handle the source voltage and transients, while layout should isolate the analog path from switching nodes and digital return currents.

🖥️

Embedded Parallel Data Acquisition

The THS1230IDW fits embedded acquisition platforms that prefer direct parallel digital outputs over a serial converter interface. Twelve output bits can feed registers, shift stages, an FPGA, or a processor input bank, while the 30 MSPS rate supports rapid single-channel observations. According to the manufacturer datasheet, the part is a 28-pin SOIC device with a 3.3 V supply and a proprietary pipelined architecture. PCB planning should allocate routing for the parallel bus, provide solid decoupling, and verify timing margins for output data capture relative to the converter clock.

What is the Texas Instruments THS1230IDW?
The THS1230IDW is a 12-bit, single-channel, 30 MSPS pipelined analog-to-digital converter with a parallel output interface and a 28-pin SOIC package. According to the manufacturer datasheet, the device operates from a 3.3 V supply, accepts an analog input range from -2 V to +2 V, and uses CMOS technology. It is intended for applications requiring rapid sampling and a 12-bit digital result.
What is the sampling rate of the THS1230IDW?
The THS1230IDW converts analog inputs at up to 30 MSPS, or 30 million samples per second. According to the manufacturer datasheet, it is a single-input pipelined ADC with a parallel 12-bit output interface. This rate makes it appropriate for communications, industrial monitoring, control, and test systems whose front-end bandwidth and acquisition timing can support the selected sampling frequency.
What are the key specifications of THS1230IDW that engineers should know?
The THS1230IDW combines 12-bit resolution, a 30 MSPS conversion rate, one analog input, a 3.3 V supply, and a 28-pin SOIC package. According to the manufacturer datasheet, its analog input range is -2 V to +2 V, its listed linearity error is 0.0488%, and its architecture is proprietary and pipelined. These characteristics define its suitability for high-speed, parallel-output signal digitization.
Where to download the THS1230IDW datasheet PDF?
The THS1230IDW datasheet PDF is available from the official Texas Instruments product-document link on this page. According to the manufacturer datasheet, use the document to confirm the complete 28-pin assignment, absolute maximum ratings, recommended operating conditions, analog input bandwidth, timing, reference requirements, and package dimensions before releasing a PCB design.
Where can I find the THS1230IDW pinout?
The THS1230IDW pinout must be taken from the pin-description table in the manufacturer datasheet. The device uses a 28-pin SOIC with parallel 12-bit outputs, power pins, ground connections, analog input connections, and control or clock functions. Assign PCB nets from that table and confirm exposed versus reserved functions rather than inferring pin names from another package variant.
Is the THS1230IDW suitable for communications signal digitization?
Yes, the THS1230IDW can suit communications signal digitization when the system needs 12-bit resolution, a 30 MSPS sampling capability, and parallel digital output. According to the manufacturer datasheet, the converter is a single-input, pipelined CMOS ADC operating at 3.3 V. The analog front end must still provide adequate bandwidth, low distortion, stable reference voltage, and acceptable jitter for the communication standard.
What can replace the THS1230IDW without changing the 28-pin SOIC footprint?
The THS1230CDW is the closest listed drop-in candidate because it retains the 12-bit, 30 MSPS, parallel ADC configuration in a 28-pin SOIC. According to the manufacturer family information, the principal ratings match, while differences in temperature grade and detailed electrical limits must still be checked. No fully verified cross-brand, pin-to-pin replacement was identified.
Is THS1230IDW the same as THS1230CDW?
No, the two parts share the main conversion configuration but are not necessarily identical in every operating limit. The THS1230CDW is listed as a 12-bit, 30 MSPS parallel ADC in a 28-pin SOIC, while the THS1230IDW carries the industrial temperature-grade designation. According to the manufacturer datasheet, verify the complete electrical tables before treating the CDW as a drop-in replacement.
THS1230IDW vs THS1230CDW — which is better for an industrial design?
The THS1230IDW is the clearer choice when the design requires the industrial-grade part identified by the THS1230IDW ordering code. The THS1230CDW offers the same principal 12-bit, 30 MSPS, 28-pin SOIC conversion configuration and may fit when its detailed temperature and electrical specifications meet the application. According to the manufacturer datasheet, compare both revision-specific limits before substitution.
When should I choose THS1230IDW over THS1230CDW?
Choose THS1230IDW when the assembly needs the industrial temperature-grade variant and the system depends on its specified operating limits. Choose THS1230CDW when its complete electrical ratings cover the design and the goal is to reuse the same 28-pin SOIC footprint. According to the manufacturer datasheet, the decision should be based on temperature limits, timing, accuracy, power, and qualification rather than resolution alone.
Is there a verified cross-brand drop-in equivalent for THS1230IDW?
No verified cross-brand, pin-to-pin 28-pin SOIC equivalent was identified for the THS1230IDW. According to the available manufacturer and parametric listing information, the device combines 12-bit resolution, 30 MSPS operation, a proprietary pipelined architecture, and a parallel output in a specific 28-pin SOIC footprint. A functional ADC substitute may use different logic levels, timing, or pin assignments and therefore is not a drop-in replacement.
How do I buy THS1230IDW and check current availability?
Use the Request a Quote form on this page to request current THS1230IDW availability, MOQ, packaging, and lead time. According to the manufacturer product information, the part is a 12-bit, 30 MSPS, 28-pin SOIC ADC offered in tube packaging. The quote form gives the purchasing team a single channel for the exact MPN rather than relying on an unverified stock indication.
What is the price of THS1230IDW?
Current commercial pricing for the THS1230IDW should be obtained through the Request a Quote form on this page. According to the manufacturer product information, the exact ordering code is a 12-bit, single-channel, 30 MSPS parallel ADC in a 28-pin SOIC. A quote response should also confirm the required tube quantity, current lifecycle status, and any authorized sourcing constraints.
What is the lead time and stock status for THS1230IDW?
Request the current lead time and stock position for THS1230IDW through the Request a Quote form on this page. According to the manufacturer product information, the device is supplied in tube packaging and is specified as an industrial-grade, 12-bit, 30 MSPS ADC. The form allows the purchasing team to confirm quantity, delivery timing, and available shipping options for the exact order code.
How should clock jitter and analog bandwidth be checked for THS1230IDW?
Clock jitter and analog bandwidth must be checked together because sampling error and front-end filtering interact. According to the manufacturer datasheet, the THS1230IDW supports 30 MSPS conversion and accepts a -2 V to +2 V input range. Confirm the input bandwidth, acquisition timing, allowable source impedance, and clock-jitter limits, then include antialias filtering appropriate to the intended signal bandwidth.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা THS1230IDW — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the THS1230IDW when the design requires the industrial-grade ordering option, a single 12-bit analog channel, 30 MSPS conversion, and a parallel digital output in a 28-pin SOIC. The THS1230CDW is the relevant drop-in candidate when its complete temperature range, timing, accuracy, power, and supply specifications satisfy the application; both retain the same principal resolution, sampling rate, and footprint. For communications, industrial monitoring, and instrumentation, verify the analog bandwidth, clock-jitter requirement, reference quality, and output timing before setting the operating sample rate. Do not select a functionally similar ADC from another manufacturer unless its package, pinout, voltage levels, clock interface, data timing, and acquisition characteristics have all been independently verified. A serial-interface ADC or a converter in a TSSOP package may offer equivalent resolution, but it is not a drop-in replacement for the THS1230IDW.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য THS1230CDW
Brand Texas Instruments Texas Instruments
Package 28-pin SOIC 28-pin SOIC
Resolution 12 bit 12 bit
Sampling Rate 30 MSPS 30 MSPS
Number of Channels 1 channel 1 channel
Output Interface 12-bit parallel 12-bit parallel

মূল পার্থক্যসমূহ

  • Single-channel 30 MSPS throughput with 12-bit resolution (বনামTHS1230CDW)
  • Industrial-grade ordering option (বনামTHS1230CDW)
  • Direct parallel 12-bit result interface (বনামTHS1230CDW)

ডিজাইন নোট

Route the 12-bit parallel output as a controlled-length bus and place any output registers close enough to capture the converter's specified data timing. Keep switching supplies, clock routing, and fast digital return currents away from the analog input and reference nodes. Use a continuous ground plane and short analog traces to reduce coupling between the 30 MSPS conversion path and the parallel digital interface.

Verify the analog source impedance, acquisition time, input bandwidth, and conversion timing together before selecting a 30 MSPS operating condition. The input network should include appropriate attenuation or gain and antialias filtering. If the source has appreciable impedance, place the driver near the ADC rather than relying on trace length alone, because inadequate settling can create amplitude-dependent conversion error even when the sample clock is nominally accurate.

Do not treat the 30 MSPS conversion rate as a guaranteed usable input bandwidth. Assess clock jitter, analog bandwidth, reference noise, and the frequency content of the intended signal. Also confirm all 28 net assignments against the manufacturer pin-description table, particularly power, ground, analog input, clock, and control functions, before releasing a layout that assumes a generic 12-bit ADC pinout.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The component is an industrial-temperature-grade analog-to-digital converter, but no explicit RoHS, REACH, halogen-free, lead-free, conflict-minerals, or automotive-qualification declaration was present in the available product information.

ডেটা যাচাই করা হয়েছে: 2026-11-16 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

THS1230IDW datasheet THS1230IDW pinout THS1230IDW datasheet pdf THS1230IDW specifications THS1230IDW 30 MSPS ADC THS1230IDW 28-SOIC THS1230IDW equivalent THS1230IDW replacement THS1230IDW vs THS1230CDW THS1230IDW cross reference THS1230IDW price THS1230IDW stock Texas Instruments THS1230IDW THS1230IDW application circuit THS1230IDW footprint

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments THS1230IDW THS1230CDW analog-to-digital converter ADC pipelined ADC 12-bit ADC 30 MSPS parallel output interface CMOS 28-pin SOIC SOIC package family surface-mount technology SMD 3.3 V power supply analog input range integral linearity error clock jitter antialias filter industrial instrumentation communications receiver digital signal processing semiconductor signal integrity
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন