শেষবার কেনার নোটিশ: TJA1041T/N1 এন্ড-অফ-লাইফের কাছাকাছি। শেষ অর্ডারের তারিখ: আমাদের সাথে যোগাযোগ করুন. উপলব্ধ বিকল্প পার্ট দেখুন →
NXP Semiconductors

TJA1041T/N1 - 1Mbit/s CAN Transceiver | NXP | SOIC-14

MPN: TJA1041T/N1 ✗ জীবনকালের সমাপ্তি
Shipping discontinuance and replacement information available from NXP Vdss 14-SO Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

TJA1041T/N1 সারাংশ

The NXP TJA1041T/N1 is a high-speed CAN transceiver designed to connect a CAN protocol controller to a physical Controller Area Network bus. It supports data rates up to 1 Mbit/s, provides one CAN transmit and receive path, and is offered in a 14-pin SOIC surface-mount package for automotive high-speed CAN systems.

A CAN transceiver is an interface IC within the automotive network-communication hierarchy. It translates the controller's logic-level TXD and RXD signals into a differential bus waveform for transmission and converts received differential bus levels into a logic signal for the controller. This physical-layer function complements the CAN protocol controller, which handles message identifiers, arbitration, error handling, and higher-level data exchange.

The TJA1041T/N1 provides differential transmit capability, differential receive capability, and compatibility with high-speed CAN protocol controllers operating up to 1 Mbit/s. Its single-transceiver arrangement suits conventional CAN nodes that do not require the additional transceiver features found in sleep-capable variants. The SOIC-14 package supports surface-mount assembly while providing separate pins for the bus interface, logic interface, ground connection, and stabilization.

Automotive and industrial CAN networks benefit from the robust differential signaling inherent in the TJA1041 architecture. Differential reception rejects common-mode voltage present on the bus, while the controller and transceiver can use twisted-pair wiring to maintain signal integrity over longer cable runs. The manufacturer's product documentation identifies the device primarily for automotive high-speed CAN applications and confirms compatibility with suitable CAN protocol controllers.

Typical deployments include engine-control units, transmission controllers, body-control modules, gateways, electronic control units, industrial automation controllers, and CAN-based sensor or actuator networks. In these systems, the TJA1041T/N1 handles the physical bus layer while a separate CAN controller manages frame arbitration, acknowledgments, error counters, and communication with the host processor.

Designers should follow the manufacturer's recommended transceiver and bus-line application circuit, including termination, common-mode choke or split-termination options where required, decoupling, and PCB routing guidance. The 1 Mbit/s capability does not remove the need for controlled bus topology, adequate ground references, correct termination placement, and protection suited to the vehicle or industrial environment.

This page combines the TJA1041T/N1 lifecycle information, verified source links, same-footprint alternatives, application guidance, and engineering design notes to support component selection, PCB planning, and long-term supply-risk assessment.

এর জন্য ড্রপ-ইন বিকল্প TJA1041T/N1 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible TJA1041T/N1 (একই form factor এবং footprint) — পার্থক্য রয়েছে Bus Interface, Package, Product Type.

NXP Semiconductors
Bus Interface: Differential CANH and CANL
Package: SOIC-8, 8-SO surface mount
Product Type: High-speed CAN bus transceiver

TJA1041T/CM,118

✅ ড্রপ-ইন
📦 SOIC-14 (14-SO)
Same 14-SO package and 1 Mbit/s high-speed CAN class, but adds standby and sleep-mode functionality relative to the standard TJA1041T/N1 configuration.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

TJA1050T/N1

✅ ড্রপ-ইন
NXP Semiconductors
📦 SOIC-14
High-speed CAN bus transceiver · 1 transmit / 1 receive half-duplex · 1 Mbit/s · 4.75 V to 5.25 V · 5 V · Differential CANH and CANL · TXD · RXD

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

TJA1041T/N1 বিশেষণ

Product Type High-speed CAN transceiver
Supported Data Rate Up to 1 Mbit/s
Transceiver Configuration 1/1 half transceiver
Bus Interface Differential CAN transmit and differential receive
Protocol Compatibility Compatible with suitable high-speed CAN protocol controllers
Primary Application Automotive high-speed CAN nodes
প্যাকেজ 14-SO
মাউন্টিং স্টাইল SMD/SMT
Manufacturer NXP Semiconductors
লাইফসাইকেল স্ট্যাটাস End of Life
Supply Chain Status Shipping discontinuance and replacement information available from NXP
Number of Transceivers 1
Interface Category CAN interface IC

TJA1041T/N1 14-so পিন কনফিগারেশন গাইড

TJA1041T/N1 (14-so প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

TJA1041T/N1-এর জন্য 14-so প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি TJA1041T/N1.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

TJA1041T/N1 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Automotive Electronic Control Units, Body-Control Module Networks, Powertrain and Transmission Controllers, Industrial Automation CAN Gateways, CAN-Based Sensor and Actuator Networks, Vehicle Network Gateways.

🚗

Automotive Electronic Control Units

The TJA1041T/N1 fits an automotive electronic control unit that requires a high-speed CAN physical layer, because NXP identifies the device for automotive CAN nodes operating up to 1 Mbit/s. The IC sits between the CAN protocol controller and the differential bus, translating TXD into the bus waveform while converting received bus levels into RXD for the controller. Its 14-SO surface-mount package supports compact, automated PCB assembly. The design must follow the manufacturer's bus-line application circuit and account for automotive ESD exposure, ground reference, bus topology, and termination placement.

🚗

Body-Control Module Networks

The TJA1041T/N1 is appropriate for a body-control module that exchanges switch, lighting, door, and sensor data over a 1 Mbit/s CAN network. Its differential transmit and receive interface reduces susceptibility to common-mode noise found in vehicle wiring, while the separate CAN controller remains responsible for arbitration and error management. The SOIC-14 package allows placement on a conventional multilayer automotive PCB. Layout should minimize loop area around bus and ground paths, keep transceiver supply decoupling close to the device, and place the network termination at the physical bus endpoints.

🚗

Powertrain and Transmission Controllers

A transmission or powertrain controller can use the TJA1041T/N1 as the 1 Mbit/s physical interface between its CAN controller and vehicle network. Differential signaling supports reliable communication over twisted-pair harnesses, while the transceiver's dedicated transmit and receive functions separate bus drive from logic-level reception. Because this is an End-of-Life device, an automotive program should evaluate lifecycle continuity, approved-source availability, date-code control, and change notification before committing the part to a new platform. The PCB and bus implementation should follow the manufacturer's reference topology.

🏭

Industrial Automation CAN Gateways

The TJA1041T/N1 can provide the physical layer for an industrial CAN gateway that links sensors, drives, remote I/O, or factory controllers at up to 1 Mbit/s. Differential CAN communication is useful in environments where cable routing passes near motors, switching equipment, or other noise sources. The gateway still requires a separate CAN protocol controller, and the bus must be designed for its maximum length, node count, topology, and termination. Engineers should verify temperature and environmental requirements for the installed enclosure and consider the device's End-of-Life status when planning product longevity.

🧩

CAN-Based Sensor and Actuator Networks

The TJA1041T/N1 is suitable for a distributed node that connects a sensor or actuator to a 1 Mbit/s CAN backbone. The controller can originate periodic measurement frames, while the TJA1041 provides the differential physical signaling required across the wiring harness. In a multi-node installation, correct termination and topology are as important as transceiver speed because reflections and excessive cable length can impair bit timing. The 14-SO footprint simplifies conventional surface-mount assembly, although the circuit should include the supply and bus-network components specified in the manufacturer's application guidance.

⚙

Vehicle Network Gateways

The TJA1041T/N1 can form the high-speed CAN side of a gateway connecting separate vehicle network segments. One CAN controller manages protocol activity on the selected bus, while the TJA1041 handles differential transmission and reception at up to 1 Mbit/s. This separation keeps physical-layer behavior separate from message filtering, diagnostic handling, and gateway software. For a new production design, lifecycle risk should be resolved through NXP's discontinuance information and a structured request for current supply. PCB routing must preserve the intended bus-impedance path and provide a low-impedance ground reference.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

TJA1050T/N1 NXP Semiconductors ব্যবহৃত হয়: Automotive Electronic Control Units, Body-Control Module Networks, Powertrain and Transmission Controllers, Industrial Automation CAN Gateways, CAN-Based Sensor and Actuator Networks, Vehicle Network Gateways TJA1041T/CM,118 Same-package CAN transceiver with low-power mode option ব্যবহৃত হয়: Automotive Electronic Control Units, Body-Control Module Networks, Powertrain and Transmission Controllers, Industrial Automation CAN Gateways, CAN-Based Sensor and Actuator Networks, Vehicle Network Gateways
Where to buy TJA1041T/N1 online?
The TJA1041T/N1 can be requested through the “Request a Quote” form on this page for new supply, scheduled delivery, or legacy inventory. Because NXP identifies the TJA1041T family as End of Life, buyers should state the required package suffix, quantity, date code, and acceptable inspection requirements in the request. This form is the appropriate channel for confirming current availability rather than relying on an unverified historical stock statement.
What is the price of TJA1041T/N1?
Current TJA1041T/N1 pricing is determined through the “Request a Quote” form on this page because the NXP family is End of Life and market pricing can vary with quantity, date code, condition, and packaging. No static price should be inferred from older catalog records. Submit the exact MPN TJA1041T/N1, desired quantity, and target delivery schedule to obtain a current quotation and traceability requirements.
What is the lead time for TJA1041T/N1?
The current lead time for TJA1041T/N1 must be confirmed through the “Request a Quote” form on this page. End-of-life availability can depend on remaining factory inventory, order volume, date-code allocation, and the selected delivery method. Provide your required quantity and target receipt date in the request so the supplier can quote an actionable schedule rather than a generic availability estimate.
Is TJA1041T/N1 in stock?
TJA1041T/N1 stock status is not established by NXP's End of Life product page and should be checked through the “Request a Quote” form on this page. For legacy CAN-transceiver procurement, include the required shipment date, acceptable date codes, packaging condition, and traceability documents in the request. This allows quotation and availability to be matched to the quality requirements of an automotive or industrial production build.
What is the TJA1041T/N1 operating data rate?
The TJA1041T/N1 supports CAN bus data rates up to 1 Mbit/s. According to the NXP TJA1041 product information, the device is primarily intended for automotive high-speed CAN applications and connects a protocol controller to the physical CAN bus. The stated 1 Mbit/s capability identifies the maximum intended operating class; actual network margin also depends on bus length, topology, termination, transceiver delay, and controller timing.
What is the difference between TJA1041T/N1 and TJA1041T/CM,118?
The TJA1041T/N1 is a 14-SO high-speed CAN transceiver, while TJA1041T/CM,118 is a distinct 14-SO variant identified with standby and sleep-mode functionality. Both belong to the TJA1041 high-speed CAN family and are listed for automotive CAN physical-layer use. The N1 ordering suffix identifies the standard target variant, while the CM designation identifies a different feature configuration; review the manufacturer ordering table before substituting one for the other.
TJA1041T/N1 vs TJA1050T/N1 - which is better for automotive CAN?
The TJA1041T/N1 is the better selection when the design requires the specifically identified TJA1041 feature set and a 1 Mbit/s high-speed CAN physical interface. The TJA1050T/N1 is also listed as a high-speed 1 Mbit/s SOIC CAN interface, but its device-specific electrical and mode characteristics must be checked against the original schematic. NXP describes the TJA1041 as intended for automotive high-speed CAN and fully compatible with suitable CAN protocol controllers.
When should I choose TJA1041T/N1 over TJA1050T/N1?
Choose TJA1041T/N1 when the approved automotive CAN bill of materials specifies the TJA1041 family and the design relies on its established feature set and qualification basis. Choose TJA1050T/N1 only after confirming its logic pins, electrical limits, propagation timing, sleep behavior, and qualification requirements against the existing design. Both are presented as high-speed SOIC CAN options, so the original schematic and manufacturer documentation remain decisive.
Is TJA1041T/N1 suitable for industrial CAN systems?
The TJA1041T/N1 is suitable for a 1 Mbit/s high-speed CAN physical layer when the industrial bus topology, cable length, termination, noise environment, and controller timing meet the manufacturer's application conditions. NXP primarily positions the device for automotive high-speed CAN, so industrial designers should also verify environmental requirements, protection needs, temperature limits, and lifecycle continuity before releasing it for long-lived equipment.
What can replace TJA1041T/N1?
The TJA1041T/CM,118 is the closest listed same-footprint alternative because it is also offered in 14-SO and implements the high-speed CAN transceiver function, although it adds standby and sleep-mode characteristics. TJA1050T/N1 is another same-package high-speed CAN option identified in the product comparison, but it is not a function-by-function substitute without a pin, timing, and electrical review. Use the “Request a Quote” form for current sourcing support.
Is TJA1041T/N1 the same as TJA1041T/CM,118?
No, TJA1041T/N1 and TJA1041T/CM,118 are not identical ordering codes. Both are 14-SO high-speed CAN transceivers, but TJA1041T/CM,118 is specifically described as a variant with standby and sleep mode. The suffix can therefore affect ordering configuration, mode-control behavior, and possibly the internal function set. Treat the CM part as a candidate replacement only after checking every pin and mode requirement in the manufacturer documentation.
What is the best cross-brand equivalent for TJA1041T/N1?
No cross-brand equivalent can be confirmed as a true drop-in replacement from the available component records. The alternative search identifies same-brand NXP candidates, but it does not establish a different manufacturer's part as pin-to-pin and parametrically compatible in the 14-SO footprint. A valid cross-brand replacement must demonstrate the same 14-pin connectivity, 1 Mbit/s capability, compatible logic levels, propagation timing, bus protection, and required automotive qualification.
Where to download the TJA1041T/N1 datasheet PDF?
The authoritative TJA1041T/N1 documentation is available through the NXP product page linked on this page. According to NXP's product information, the page provides the manufacturer data sheet along with environmental quality, shipping discontinuance, and replacement information. Use the NXP document for electrical limits, timing, pin descriptions, application circuits, and ordering information, and record the document revision used during design qualification.
Where to find the TJA1041T/N1 pinout?
The TJA1041T/N1 pin descriptions and 14-pin SOIC connectivity must be taken from the NXP manufacturer's data sheet rather than inferred from the package drawing. The verified product information identifies the device as a 14-SO CAN transceiver but does not reproduce the complete pin table. Use the pin-description table and package drawing in the manufacturer document when assigning PCB tracks, bus connections, ground connections, and stabilization components.
What are the key specifications of TJA1041T/N1 that engineers should know?
The key confirmed specifications are a maximum intended CAN data rate of 1 Mbit/s, one differential transmit and receive path, differential CAN bus signaling, a 14-SO surface-mount package, and primary use in automotive high-speed CAN nodes. NXP also identifies the TJA1041T family as End of Life. Detailed voltage limits, propagation delays, ESD ratings, temperature range, and protection thresholds should be confirmed in the manufacturer data sheet before schematic approval.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা TJA1041T/N1 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Select TJA1041T/N1 when an existing automotive or industrial CAN design specifies the standard TJA1041T device and requires a 1 Mbit/s high-speed physical interface in a 14-SO footprint. For a new production program, first evaluate its End-of-Life status and establish a controlled supply plan. Consider TJA1041T/CM,118 when the board can accommodate its standby and sleep-mode configuration, but verify that the added behavior does not alter firmware control or pin requirements. TJA1050T/N1 may suit a comparable high-speed SOIC CAN design, yet it should be treated as a redesign candidate unless its pin assignments, timing, electrical limits, and protection behavior are verified against the TJA1041 implementation. No cross-brand drop-in option is established by the available records, so direct substitution with another manufacturer's transceiver requires a separate engineering qualification and board-level review.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য TJA1041T/CM,118 TJA1050T/N1
Package SOIC-14 (14-SO) SOIC-14 (14-SO) SOIC
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors
Product Type High-speed CAN transceiver High-speed CAN transceiver High-speed CAN interface
Supported Data Rate Up to 1 Mbit/s 1 Mbit/s 1 Mbit/s
Primary Application Automotive high-speed CAN High-speed CAN interface High-speed CAN interface
Mounting Style SMD/SMT SMD/SMT SMD/SMT

মূল পার্থক্যসমূহ

  • Established 1 Mbit/s automotive high-speed CAN positioning (বনামTJA1050T/N1)
  • Standard N1 ordering configuration (বনামTJA1041T/CM,118)
  • Single 14-SO high-speed CAN transceiver (বনামTJA1041T/CM,118)

ডিজাইন নোট

Route CANH and CANL as a closely coupled differential pair, referencing the PCB ground plane. Avoid long stubs, test pads that break coupling, and unnecessary vias. Keep the transceiver, its CAN controller, and the bus-line conditioning components close together so that transmit and receive paths remain compact. The manufacturer's application circuit should be used to determine trace geometry and the location of any common-mode choke.

Do not assume that a 14-pin CAN transceiver can be replaced solely because the package matches. Verify TXD, RXD, ground, supply, stabilization, mode-control, and no-connect assignments against the manufacturer pin table. In particular, TJA1041T/CM,118 adds standby and sleep-mode characteristics, and TJA1050T/N1 may differ in logic-pin implementation. Confirm propagation delay and mode behavior before approving a substitution.

Place the transceiver's required supply-decoupling components close to their associated pins and follow the manufacturer network recommendation. Keep switching regulators, inductors, and high-current return paths away from the CAN receive path to reduce differential and common-mode noise. If the bus requires a split termination or common-mode choke, select its values and placement according to the manufacturer's application guidance rather than general-purpose rules.

Evaluate transceiver power dissipation from the actual supply voltage, dominant current, and bus activity rather than from a nominal output-current rating alone. The 14-SO package should be placed on a PCB with an appropriate copper area and solid ground reference. Confirm the manufacturer's operating-temperature limits and maximum electrical ratings for the selected grade, particularly for automotive applications exposed to temperature extremes.

End-of-Life status should be treated as a supply-planning constraint. Record the exact ordering suffix, quantity, date-code preference, inspection level, and traceability requirements when requesting supply. Do not substitute another TJA1041 packing suffix or family member without engineering approval, because the ordering code can represent a distinct mode configuration even when the package and headline CAN data rate are identical.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The NXP product page provides environmental quality and lifecycle information, but the verified product records do not explicitly state the required compliance statuses. No compliance claim should be inferred from the automotive application description.

ডেটা যাচাই করা হয়েছে: 2026-11-14 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

tja1041t datasheet tja1041t datasheet pdf TJA1041T/N1 datasheet TJA1041T/N1 pinout TJA1041T/N1 replacement TJA1041T/N1 equivalent TJA1041T/N1 price TJA1041T/N1 stock NXP TJA1041T/N1 TJA1041T vs TJA1050T TJA1041T 14-SO pinout TJA1041T automotive CAN application TJA1041T drop-in replacement what is TJA1041T/N1

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

NXP Semiconductors TJA1041T/N1 TJA1041T TJA1041T/CM,118 TJA1050T/N1 CAN transceiver CAN interface IC Controller Area Network high-speed CAN automotive CAN differential CAN transmit differential CAN receive CAN protocol controller 1 Mbit/s SOIC-14 14-SO SMD/SMT surface mount physical bus layer CANH CANL common-mode noise bus termination End of Life RoHS REACH
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন