Texas Instruments

TLV2241IP - 12V 5.5kHz RRIO Op Amp | Texas Instruments

MPN: TLV2241IP ✓ সক্রিয়
12 V Vdss Approximately 1 uA per channel Id 8-pin PDIP (P) Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

TLV2241IP সারাংশ

The Texas Instruments TLV2241IP is a single, micropower, 12 V rail-to-rail input/output operational amplifier with a 5.5 kHz gain-bandwidth product, packaged in an 8-pin PDIP. The amplifier operates from a 2.5 V single supply and consumes approximately 1 uA per channel, making it suitable for low-power instrumentation and battery-powered systems.

An operational amplifier is a voltage-gain and signal-conditioning component used in the analog signal path. Its place in the device hierarchy is operational amplifier, analog amplifier, amplifier IC, integrated circuit, and semiconductor. The TLV2241IP supports common-mode input and output operation near the supply rails, which helps preserve signal range in low-voltage systems where the available input and output swing is limited.

The TLV2241 family provides very low supply current, extremely low input bias current, a typical offset voltage as low as 600 uV, 100 dB CMRR, and a minimum open-loop gain of 100 V/mV at a 2.7 V supply. The 5.5 kHz gain-bandwidth product supports low-frequency precision, sensing, and signal-conditioning tasks without the power requirements of a higher-bandwidth amplifier.

Its rail-to-rail input stage accepts signals extending toward the positive and negative supply rails. The low input bias current makes the amplifier suitable for high-impedance sources and applications using megaohm-class resistors. Open-loop gain of at least 100 V/mV provides useful DC loop gain, while the 100 dB CMRR helps reject common-mode voltage in battery-powered and industrial measurement circuits.

Typical applications include portable sensor interfaces, battery monitoring, low-current transducers, industrial measurement systems, and low-speed control loops. Its 1 uA-class supply current is especially useful when the amplifier must remain continuously powered alongside sensors, while the 5.5 kHz bandwidth is appropriate for signals that do not require high-speed video or communications performance.

Design should account for the limited gain-bandwidth product when selecting feedback resistors and closed-loop gain. The 8-pin PDIP footprint provides through-hole assembly and straightforward prototyping, while the wide supply and input ranges support low-voltage single-supply operation. Confirm the complete pin description and operating limits against the manufacturer datasheet before final PCB implementation.

এর জন্য ড্রপ-ইন বিকল্প TLV2241IP — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible TLV2241IP (একই form factor এবং footprint) — পার্থক্য রয়েছে Amplifier Type, Mounting Type, Package.

Texas Instruments
Amplifier Type: Single general-purpose operational amplifier
Mounting Type: Surface mount
Package: 8-SOIC (SOIC-8)
এর সাথে তুলনা করুন TLV2241IP →

TLV2241IPE4

✅ ড্রপ-ইন
📦 8-pin PDIP (P)
Order-code suffix differs, while the identified supply range of 2.5 V, temperature range of -40 C to +125 C, and 8-pin PDIP format remain the same

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

TLV2241IPG4

✅ ড্রপ-ইন
📦 8-pin PDIP (P)
Order-code suffix differs, with the same identified 2.5 V single-supply configuration, -40 C to +125 C range, and 8-pin PDIP package

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

TLV2241IP সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Amplifier Type Single operational amplifier
Maximum Supply Voltage 12 V
Nominal Single-Supply Voltage 2.5 V
Gain-Bandwidth Product 5.5 kHz
সাপ্লাই কারেন্ট Approximately 1 uA per channel
Input Bias Current Extremely low; numerical value not stated
Typical Offset Voltage As low as 600 uV
Common-Mode Rejection Ratio 100 dB
Minimum Open-Loop Gain 100 V/mV at 2.7 V
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
অপারেটিং তাপমাত্রার পরিসর -40 C to +125 C
প্যাকেজ 8-pin PDIP (P)
Package Pin Count 8 pins
Package Row Spacing 7.62 mm
মাউন্টিং টাইপ Through-hole

TLV2241IP 7.62 mm পিন কনফিগারেশন গাইড

TLV2241IP (7.62 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

TLV2241IP-এর জন্য 7.62 mm প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি TLV2241IP.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

TLV2241IP এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Battery-Powered Sensor Conditioning, Portable Medical and Industrial Measurements, Low-Current Power Monitoring, High-Impedance Transducer Interface, Portable Test and Measurement Equipment, Low-Speed Industrial Control Loops.

🧩

Battery-Powered Sensor Conditioning

The TLV2241IP fits low-power sensor interfaces because it operates from a 2.5 V single supply and draws approximately 1 uA per channel. Place the amplifier close to the sensor and conditioning network to limit susceptible trace length and preserve the small available signal range. Rail-to-rail input and output operation helps use much of the supply voltage, while the 5.5 kHz gain-bandwidth product is appropriate for temperature, pressure, and position signals that change slowly. The principal trade-off is bandwidth: applications requiring rapid settling or high-frequency content need a faster amplifier.

💊

Portable Medical and Industrial Measurements

The TLV2241IP supports portable measurement systems that combine a low supply voltage with long battery life. Its approximately 1 uA supply current, 100 dB CMRR, and typical offset voltage as low as 600 uV help preserve small differential signals from field sensors. The amplifier can operate from a 2.5 V supply, and its rail-to-rail I/O characteristic reduces the voltage lost near the rails. Because the gain-bandwidth product is only 5.5 kHz, use it for slow physiological, environmental, or process signals rather than wideband waveforms.

⚡

Low-Current Power Monitoring

The TLV2241IP can amplify a scaled voltage representing battery or power-supply current for low-energy monitoring equipment. Its approximately 1 uA supply current keeps amplifier overhead small relative to the monitored system, and the 2.5 V minimum nominal supply supports compact single-rail designs. A 5.5 kHz closed-loop bandwidth is sufficient for slow current changes and threshold detection. When the monitored signal is differential, use the amplifier with a suitable low-side or high-side current-sense circuit and verify that its input common-mode range remains valid.

🔧

High-Impedance Transducer Interface

The extremely low input bias current of the TLV2241 family makes the TLV2241IP relevant to high-impedance transducers and very high-value feedback networks. A biased noninverting amplifier can use megaohm-class resistors while the amplifier's bias current introduces less disturbance to the source. The 100 dB CMRR helps reject common-mode noise, and rail-to-rail input operation supports low-voltage sensing. Keep the 5.5 kHz bandwidth limit in mind because high-value feedback networks also increase sensitivity to parasitic capacitance and noise.

🖥️

Portable Test and Measurement Equipment

The TLV2241IP is useful in handheld meters and low-power test equipment that require accurate amplification of slow input signals. Its 12 V maximum supply, low offset voltage, 100 dB CMRR, and approximately 1 uA supply current balance measurement precision with portable power budgets. Rail-to-rail operation is useful when the front end uses a low-voltage sensor reference. Configure the feedback network for the intended closed-loop gain, and verify settling time if the meter must respond quickly after a range or input change.

🏭

Low-Speed Industrial Control Loops

The TLV2241IP can serve as the error amplifier in a low-speed industrial control loop when the process bandwidth is modest. Its high DC open-loop gain, low typical offset, and 100 dB CMRR support accurate regulation around a slow reference, while the micropower operating current helps limit standby consumption. The single 2.5 V nominal supply and rail-to-rail I/O simplify operation from compact sensor and actuator rails. Ensure loop crossover remains below the 5.5 kHz gain-bandwidth limit and include compensation appropriate to the feedback network and output loading.

What is the operating voltage of TLV2241IP?
The TLV2241IP operates from a 2.5 V single supply and supports supply voltages up to 12 V. According to the Texas Instruments TLV2241 product page and datasheet, the device is designed for low-voltage single-supply systems while retaining rail-to-rail input and output capability. Designers should keep the actual supply below the 12 V maximum and include circuit-specific margin for supply transients.
What are the key specifications of TLV2241IP that engineers should know?
The TLV2241IP is a single 12 V, micropower, rail-to-rail input/output operational amplifier with a 5.5 kHz gain-bandwidth product and approximately 1 uA supply current per channel. The Texas Instruments TLV2241 datasheet also identifies offset voltage as low as 600 uV, 100 dB CMRR, and minimum open-loop gain of 100 V/mV at 2.7 V. These characteristics favor slow, precision, battery-powered signal paths.
Where can I download the TLV2241IP datasheet PDF?
The official Texas Instruments TLV2241 datasheet is available through the manufacturer's product link at https://www.ti.com/lit/gpn/TLV2241. Use that document for the complete electrical characteristics, ordering information, pin description, and application guidance. The TLV2241IP ordering option is also identified as an 8-pin PDIP device with 8 pins.
Where can I find the TLV2241IP pinout?
The TLV2241IP pinout is documented in the Texas Instruments TLV2241 datasheet under the pin-configuration and package-information sections. The exact TLV2241IP orderable device uses an 8-pin PDIP package. Assign PCB connections from the manufacturer pin-description table so that power, input, output, offset-null, and any no-connect functions are wired exactly as specified.
What can replace the TLV2241IP?
The TLV2241IPE4 and TLV2241IPG4 are orderable TLV2241IP-family alternatives identified by the same 8-pin PDIP format and the same stated -40 C to +125 C operating range. Their order codes differ, so designers should confirm the specific suffix, package marking, and assembly requirements in the manufacturer ordering information before treating either device as a drop-in substitution.
Is TLV2241IP the same as TLV2241IPE4?
The TLV2241IPE4 is a Texas Instruments orderable variant associated with the same single, 2.5 V, rail-to-rail I/O, 8-pin PDIP amplifier configuration and -40 C to +125 C range as the TLV2241IP. The suffix identifies a particular orderable version rather than a different circuit topology. Check the exact suffix-specific marking and ordering table before approving a substitution.
TLV2241IP vs TLV2241IPE4 - which is better for a legacy through-hole design?
Both TLV2241IP and TLV2241IPE4 are associated with the 8-pin PDIP TLV2241 configuration, so either can suit a legacy through-hole layout if the exact pin and electrical details are confirmed. Choose the orderable suffix that matches the required device marking, qualification records, and assembly plan. The manufacturer datasheet and ordering information remain the deciding documents for procurement.
When should I choose TLV2241IP over a higher-bandwidth operational amplifier?
Choose the TLV2241IP when low supply current, a 12 V maximum supply, and rail-to-rail single-supply operation matter more than wideband response. Its 5.5 kHz gain-bandwidth product is suited to slow sensor and control signals, while approximately 1 uA supply current per channel supports long-life portable equipment. A higher-bandwidth amplifier is preferable when signal slew rate or closed-loop bandwidth requirements exceed the TLV2241IP's capabilities.
Is TLV2241IP suitable for battery-powered sensor interfaces?
The TLV2241IP is suitable for many battery-powered sensor interfaces because it operates from a 2.5 V single supply and consumes approximately 1 uA per channel. Rail-to-rail input and output behavior also helps maximize signal range at low supply voltages. The application must remain within the 5.5 kHz gain-bandwidth range and should account for the amplifier's input bias current when using extremely high source impedances.
What is the best cross-brand equivalent for TLV2241IP?
The best cross-brand equivalent is the device whose 8-pin PDIP pinout, supply range, input/output swing, offset, bandwidth, bias current, and stability requirements closely match the TLV2241IP. The available substitution records do not identify a verified cross-brand part, so selecting one would require an engineering review rather than a claim of pin compatibility. Use the Texas Instruments cross-reference resources and manufacturer data to validate any proposed substitute.
How much current does TLV2241IP consume?
The Texas Instruments TLV2241 datasheet describes a supply current of approximately 1 uA per channel for the TLV224x family. This micropower operating point is central to the TLV2241IP's suitability for portable, long-active-life equipment. Actual system consumption also includes resistor-divider current, load current, and any other circuitry connected to the same supply rail.
Does the TLV2241IP support rail-to-rail input and output?
Yes, the TLV2241IP is a rail-to-rail input/output operational amplifier. According to the Texas Instruments TLV2241 family description, this allows the input and output voltage ranges to extend toward the supply rails, which is valuable in 2.5 V and other low-voltage systems. Designers should still verify output-current and load conditions before assuming full rail-to-rail behavior under every operating condition.
Where can I buy TLV2241IP online and what is its price?
Use the Request a Quote form on this page to inquire about TLV2241IP availability, current unit pricing, and order quantities. The form is the appropriate route for a quote because component pricing and inventory can change with market conditions. The device is also listed for order by Texas Instruments as an 8-pin PDIP operational amplifier.
What is the lead time for TLV2241IP?
Request the current TLV2241IP lead time and minimum order quantity through the Request a Quote form on this page. Lead time can vary with order quantity, inventory, and the selected orderable suffix. The TLV2241IP is identified by Texas Instruments as an 8-pin PDIP product, but a project-specific delivery commitment should be confirmed before the schedule is finalized.
Is TLV2241IP in stock?
Current TLV2241IP stock should be checked through the Request a Quote form on this page. Inventory levels can change quickly and may differ between the standard TLV2241IP suffix and related order codes. Provide the required quantity, target package suffix, and delivery date with the request so the quotation can reflect the correct configuration.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা TLV2241IP — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the TLV2241IP for a low-power, low-frequency design that requires a single amplifier operating from a 2.5 V single supply with rail-to-rail input and output behavior. Its approximately 1 uA supply current, typical offset as low as 600 uV, 100 dB CMRR, and 12 V maximum supply make it well suited to portable sensing, battery monitoring, and slow industrial control loops. Select TLV2241IPE4 or TLV2241IPG4 when the specific Texas Instruments order code or assembly program requires that suffix. Do not choose this amplifier family for wideband signal conditioning, fast ADC drivers, or high-slew-rate applications because the 5.5 kHz gain-bandwidth product is the primary limitation. For a cross-brand substitution, require an exact 8-pin PDIP pinout and independently verify supply range, common-mode range, output swing, bias current, stability, and bandwidth against the original design.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য TLV2241IPE4 TLV2241IPG4
Package 8-pin PDIP (P) 8-pin PDIP 8-pin PDIP
Brand Texas Instruments Texas Instruments Texas Instruments
Maximum Supply Voltage 12 V 12 V 12 V
Nominal Single-Supply Voltage 2.5 V 2.5 V 2.5 V
Gain-Bandwidth Product 5.5 kHz 5.5 kHz 5.5 kHz
Supply Current Approximately 1 uA per channel Approximately 1 uA per channel Approximately 1 uA per channel
Input and Output Operation Rail-to-rail Rail-to-rail Rail-to-rail
Operating Temperature Range -40 C to +125 C -40 C to +125 C -40 C to +125 C
Circuit Configuration Single operational amplifier Single operational amplifier Single operational amplifier
Mounting Type Through-hole Through-hole Through-hole

মূল পার্থক্যসমূহ

  • Micropower operation supports long-life portable designs (বনামTLV2241IPE4)
  • Rail-to-rail operation improves low-voltage signal utilization (বনামTLV2241IPG4)
  • DC precision is suitable for low-speed measurement paths (বনামTLV2241IPE4)

ডিজাইন নোট

Use the approximately 1 uA per channel supply-current rating as the amplifier's baseline power estimate. For example, Estimated: a 2.5 V supply with 1 uA amplifier current corresponds to approximately 2.5 nW of amplifier supply power before load and divider currents. Add the current drawn by feedback resistors and downstream loads when sizing the source, and confirm that the source remains within the device's 12 V maximum supply rating.

Keep the feedback network and signal route compact because the TLV2241IP has a 5.5 kHz gain-bandwidth product. High-value feedback resistors can increase sensitivity to parasitic capacitance, leakage, and noise. For slow-signal applications, place the amplifier close to the source, use guarded or shielded routing when leakage matters, and test the completed board across the intended supply range and temperature range.

Design the PCB around the exact 8-pin PDIP pin assignment in the manufacturer datasheet. Maintain short, direct connections for the input, output, supply, and ground pins, especially when the amplifier drives capacitive loads or senses high-impedance sources. Place power-bypass capacitors close to the supply pins and route return current without sharing long paths with sensitive input signals.

Do not treat rail-to-rail input/output as unlimited dynamic range under every load condition. Check output swing, capacitive loading, stability, and input common-mode limits using the datasheet's test conditions. Also avoid assuming that the TLV2241IP can drive a fast-moving waveform merely because it can amplify low-frequency signals; its 5.5 kHz bandwidth and associated settling behavior must satisfy the application.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

Compliance attributes were not identified in the retrieved product records. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status using the current Texas Instruments product documentation and the applicable orderable suffix.

ডেটা যাচাই করা হয়েছে: 2026-11-15 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

TLV2241IP datasheet TLV2241IP pinout TLV2241IP datasheet pdf TLV2241IP equivalent TLV2241IP replacement TLV2241IP cross reference TLV2241IP vs TLV2241IPE4 TLV2241IP 12V op amp TLV2241IP 5.5kHz bandwidth TLV2241IP PDIP footprint TLV2241IP battery powered sensor Texas Instruments TLV2241IP TLV2241IP price TLV2241IP stock what is TLV2241IP used for

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments TLV2241IP TLV2241 TLV2241IPE4 TLV2241IPG4 operational amplifier single amplifier rail-to-rail input rail-to-rail output RRIO micropower amplifier analog amplifier amplifier IC integrated circuit semiconductor gain-bandwidth product supply current input bias current offset voltage common-mode rejection ratio open-loop gain PDIP-8 DIP package through-hole 2.5 V single supply
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন