Texas Instruments

TLV2332ID - Dual 8V 525kHz Operational Amplifier | Texas Instruments

MPN: TLV2332ID ✓ সক্রিয়
8 V Vdss 8-pin SOIC Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

TLV2332ID সারাংশ

The Texas Instruments TLV2332ID is a dual, low-voltage operational amplifier with an 8 V maximum supply rating, 525 kHz gain-bandwidth product, and an 8-pin SOIC package. It is designed for single-supply operation at 3 V and 5 V, providing two amplifier channels in one package. Its common-mode input range extends below the negative supply rail, making it useful in compact systems where signal inputs can approach ground.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The TLV2332 belongs to the LinCMOS low-voltage, medium-power operational-amplifier family. In the broader component hierarchy, it is an operational amplifier, analog amplifier IC, and semiconductor designed for signal conditioning, buffering, voltage comparison, and feedback control.

The TLV2332 family is specified for operation from a single supply as low as 3 V and is fully characterized at 5 V and 8 V. Its 525 kHz gain-bandwidth product supports moderate-bandwidth signal paths, while the low input-bias-current characteristics provide low input noise current. The common-mode input voltage can extend below the negative rail, which is particularly helpful for sensor interfaces and single-supply amplifier stages whose useful signal range approaches 0 V.

Each device contains two independent amplifier channels. The dual configuration reduces component count and PCB area when a design requires two similar amplifier functions. Because it is a medium-power LinCMOS family member rather than an ultra-low-power comparator or micropower amplifier, it provides a useful balance between bandwidth, low-voltage operation, and drive capability. The exact output-current, input-offset, noise-density, and slew-rate figures should be confirmed in the manufacturer datasheet for the selected operating conditions.

Typical uses include low-voltage sensor conditioning, buffered ADC inputs, portable instrumentation, audio preamplification, threshold detection, and general-purpose analog signal processing. The 3 V and 5 V single-supply characterization makes the device suitable for battery-powered and embedded systems, while its 525 kHz bandwidth supports applications that do not require the speed of a high-frequency precision amplifier.

PCB design should account for input-bias-current-driven offsets, output drive capability, and stable operation near the supply rails. Place input and output compensation or decoupling components close to their associated pins, maintain short feedback paths, and provide adequate ground-return geometry. Check the datasheet pin configuration and common-mode limits before assigning signal sources, particularly when inputs can remain below 0 V relative to the circuit ground.

This product page combines the TLV2332ID device specifications, package details, sourcing guidance, and engineering-oriented design guidance. It also distinguishes documented drop-in choices from unverified substitutions so engineers can assess PCB compatibility, electrical limits, and application fit before approving a replacement.

এর জন্য ড্রপ-ইন বিকল্প TLV2332ID — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible TLV2332ID (একই form factor এবং footprint) — পার্থক্য রয়েছে Amplifier Type, Mounting Type.

Texas Instruments
Amplifier Type: Dual general-purpose operational amplifier
Mounting Type: Through-hole
এর সাথে তুলনা করুন TLV2332ID →

TLV2332IP

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Texas Instruments
📦 SOIC-8
Dual general-purpose operational amplifier · 2 channels · 8 V · 525 kHz · LinCMOS · Low-voltage medium-power · Single-supply capable

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

TLV2332U

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 SOIC-8
Same dual TLV2332-family architecture and 8-pin SOIC footprint; ordering qualification grade differs, with key ratings within 0% subject to confirmation from the orderable datasheet

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

TLV2332ID সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Amplifier Type Dual operational amplifier
Number of Channels 2 channels
Maximum Supply Voltage 8 V
Single-Supply Operation 3 V and 5 V
Gain-Bandwidth Product 525 kHz
Common-Mode Input Range Extends below the negative supply rail
Output Voltage Swing Includes the negative rail
প্যাকেজ 8-pin SOIC
মাউন্টিং টাইপ Surface mount

TLV2332ID পিন কনফিগারেশন

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
পিন 1 OUTA — Channel A output
পিন 2 INTA- — Channel A inverting input
পিন 3 INTA+ — Channel A non-inverting input
পিন 4 V- — Negative supply connection
পিন 5 INTB+ — Channel B non-inverting input
পিন 6 INTB- — Channel B inverting input
পিন 7 OUTB — Channel B output
পিন 8 V+ — Positive supply connection

সাধারণ ব্যবহার

TLV2332ID এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Battery-Powered Sensor Conditioning, Buffered ADC Input, Portable Audio Preamplification, Low-Voltage Threshold Detection, Portable Test and Measurement, Embedded Control Signal Interface.

🧩

Battery-Powered Sensor Conditioning

The TLV2332ID fits battery-powered sensor interfaces because it supports 3 V and 5 V single-supply operation and its common-mode input range extends below the negative rail. A thermistor, resistive sensor, or low-level transducer can therefore be amplified while useful input signals approach ground. The two channels can condition one sensor path and provide a second stage for filtering or level conversion. Its 525 kHz gain-bandwidth product handles slow-to-moderate sensor bandwidth efficiently, while the low input-bias-current characteristics reduce measurement errors with high-impedance sources. Check output swing and supply current against the sensor excitation and battery budget before finalizing the circuit.

📊

Buffered ADC Input

The TLV2332ID can buffer low-impedance inputs to an analog-to-digital converter when the source has high output impedance or requires gain. Its 525 kHz gain-bandwidth product supports conventional sample-and-hold systems and general-purpose conversion front ends, while two channels can buffer two related sensor channels. The common-mode range extending below the negative rail is useful when a sensor output starts near 0 V on a single supply. The amplifier must still deliver the required output range and settling accuracy at the converter’s acquisition time, so use the electrical-characteristics curves to verify dynamic performance rather than relying on bandwidth alone.

🎧

Portable Audio Preamplification

The TLV2332ID is suitable for low-level audio preamplification in compact, single-supply equipment. Its dual-channel architecture supports left and right signal paths, while the 525 kHz gain-bandwidth product covers voice and other moderate-bandwidth audio content. Operation from 3 V or 5 V accommodates battery-powered and portable-system supply rails, and the common-mode input capability can simplify microphone or line-stage biasing near ground. Actual headroom, output swing, noise, and drive into the next stage should be checked at the intended frequency and load because those performance values depend on operating voltage and circuit configuration.

🏭

Low-Voltage Threshold Detection

The TLV2332ID can implement dual-channel threshold detection by comparing an input with a reference and driving a logic-compatible downstream circuit. Its 525 kHz gain-bandwidth product allows moderately fast comparator-like behavior without operating as a dedicated comparator, and both channels can monitor separate signals. The 3 V and 5 V single-supply ratings make the device useful in embedded control systems. Verify output-current capability, saturation behavior, input offset, and propagation delay at the selected gain and supply voltage; a dedicated comparator may be preferable when rail-to-rail input operation or very fast switching is mandatory.

🖥️

Portable Test and Measurement

The TLV2332ID is appropriate for low-level measurement front ends in portable instrumentation because it combines two channels with 3 V and 5 V single-supply operation. The amplifiers can condition two inputs, form differential measurement circuits, or provide buffering between sensors and a converter. A gain-bandwidth product of 525 kHz is sufficient for many general-purpose measurement bandwidths, while operation below 8 V supports compact isolated or battery-powered equipment. The designer should verify input bias current, offset, noise density, output drive, and stability with the intended source impedance and feedback network using the manufacturer’s tested application guidance.

🤖

Embedded Control Signal Interface

The TLV2332ID can interface control, feedback, and actuator signals in embedded equipment operating from 3 V or 5 V. Two independent channels can amplify sensor feedback and condition an analog command simultaneously, reducing package count compared with two separate single amplifiers. The common-mode input range extending below the negative rail is helpful for signals referenced close to ground. Designers should preserve the feedback components near the device, avoid excessive trace resistance in high-impedance inputs, and verify output current and settling behavior against the controlled load to prevent unexpected saturation during transient operation.

What is the Texas Instruments TLV2332ID?
The TLV2332ID is a dual, low-voltage operational amplifier designed for single-supply systems. It operates with an 8 V maximum supply rating, offers a 525 kHz gain-bandwidth product, and is available in an 8-pin SOIC package. According to the Texas Instruments TLV2332 datasheet, both amplifier channels support 3 V and 5 V single-supply operation, making the device suitable for low-voltage sensor, instrumentation, buffering, and general analog signal-processing circuits.
What is the gain-bandwidth product of TLV2332ID?
The TLV2332ID has a gain-bandwidth product of 525 kHz. This bandwidth supports moderate-frequency closed-loop amplifier operation while remaining appropriate for general-purpose, low-voltage signal conditioning. The Texas Instruments TLV2332 product page identifies the device as a dual, 8 V, 525 kHz operational amplifier. Exact gain-bandwidth behavior should be evaluated at the selected noise gain because bandwidth varies with closed-loop gain and operating voltage.
Can TLV2332ID operate from a 3 V or 5 V single supply?
Yes, the TLV2332ID supports 3 V and 5 V single-supply operation and is fully characterized over the specified supply range. The Texas Instruments datasheet describes wide supply-voltage operation, including 5 V characterization and 3 V single-supply use. This makes both channels suitable for systems whose supply rails fall between battery-derived 3 V and regulated 5 V, provided the input, output, and common-mode signals remain within their specified limits.
Where can I download the TLV2332ID datasheet PDF?
The official TLV2332ID datasheet is available from the Texas Instruments product page and the manufacturer-hosted datasheet link on this page. The manufacturer document identifies the TLV2332 as a LinCMOS low-voltage, medium-power dual operational amplifier. Use the pin-description table, electrical-characteristics tables, and application information in that document when assigning the eight pins and checking limits at the intended supply voltage and temperature.
What is the TLV2332ID pinout?
The TLV2332ID uses a standard eight-pin dual-operational-amplifier arrangement in its SOIC package. According to the Texas Instruments datasheet pin description, channel A uses pins 1 through 4, channel B uses pins 5 through 8, with supply pins 4 and 8. Use the manufacturer pin table when assigning PCB nets, particularly because the two channels are electrically independent apart from their shared supply connections.
What can replace the TLV2332ID on the same PCB?
The TLV2332IP is the closest documented same-family option identified for replacement evaluation because it retains the TLV2332 device type and SOIC form factor. However, production use requires checking the ordering temperature grade, electrical limits, enable or shutdown behavior, and pin configuration against the TLV2332ID datasheet. The cross-reference results did not identify a verified cross-brand part, so an unapproved substitute should not be treated as a guaranteed drop-in replacement.
TLV2332ID vs TLV2332IP: which should I choose?
Choose TLV2332ID when its specified temperature grade and electrical ratings match the design, and choose TLV2332IP only after comparing its ordering parameters with the TLV2332ID. Both are TLV2332-family dual, 8 V, 525 kHz operational amplifiers associated with an 8-pin SOIC footprint. The practical decision is therefore not bandwidth but the exact orderable grade, operating-temperature coverage, qualification requirements, and lifecycle availability documented for each part.
When should I choose TLV2332ID over another low-voltage dual op amp?
Choose TLV2332ID when the design needs two amplifier channels, a 525 kHz gain-bandwidth product, operation from a 3 V or 5 V single supply, and a common-mode range that extends below the negative rail. It is especially appropriate for low-voltage sensor and instrumentation paths that benefit from low input-bias-current behavior. Select another amplifier when its lower power, rail-to-rail output, wider bandwidth, lower offset, or automotive qualification is more important than this feature balance.
Is TLV2332ID suitable for battery-powered sensor interfaces?
Yes, the TLV2332ID is suitable for many battery-powered sensor interfaces because the manufacturer characterizes 3 V and 5 V single-supply operation and specifies a common-mode input range extending below the negative rail. Those characteristics allow a signal near ground to be amplified without shifting the entire input range above the negative supply. Check total supply current, output swing, and the sensor source impedance before finalizing the power budget.
Where can I buy TLV2332ID and get current stock and lead time?
Use the Request a Quote form on this page to ask for TLV2332ID availability, current lead time, and order quantities. The form lets procurement confirm the exact package and orderable suffix without relying on an outdated catalog record. The manufacturer part page and the listed distributor records can be used to confirm the device identity, while the quote form is the appropriate channel for a current supply commitment.
What is the current price of TLV2332ID?
The current commercial price for TLV2332ID should be requested through the Request a Quote form on this page. That form confirms quantity, currency, packaging, and delivery terms for the exact TLV2332ID orderable part. Because distributor pricing changes with market conditions and order quantity, use the form rather than treating an archived catalog figure as a guaranteed current quotation.
Is TLV2332ID in stock and what is its lead time?
Use the Request a Quote form on this page to confirm current TLV2332ID stock and production lead time. Inventory can vary by package quantity, shipment destination, and manufacturing schedule, so a historical availability statement is not sufficient for a new build. Include the required quantity, delivery date, and shipment location in the request to obtain a usable supply commitment.
What are the key specifications of TLV2332ID that engineers should know?
The principal TLV2332ID specifications are dual-channel operation, an 8 V maximum supply rating, a 525 kHz gain-bandwidth product, 3 V and 5 V single-supply characterization, and an 8-pin SOIC package. According to the Texas Instruments product page and datasheet, the common-mode input range extends below the negative rail and the input-bias-current requirement produces low input noise current. Designers should also verify offset, slew rate, output swing, current, and temperature limits from the electrical-characteristics tables.
What is the best cross-brand equivalent for TLV2332ID?
No cross-brand equivalent can be identified as a guaranteed drop-in replacement from the available manufacturer and cross-reference information. A valid replacement would need the same 8-pin SOIC pinout, dual-channel architecture, 3 V or 5 V operating capability, approximately 525 kHz bandwidth, and compatible input/output ranges. Because no specific cross-brand MPN is documented, engineers should use the manufacturer cross-reference search and then validate the candidate against the full TLV2332ID electrical specification before changing the BOM.
Is TLV2332ID the same as TLV2322 or another TLV23xx amplifier?
No, the TLV2332 is not automatically interchangeable with every TLV23xx member. The family includes devices optimized for different combinations of power, speed, and output capability, and the manufacturer describes the TLV233x as combining low power with good performance rather than the ultra-low-power focus of the TLV2322. Confirm the gain-bandwidth product, output swing, quiescent current, stability, and pin behavior for the specific replacement before treating it as pin-compatible.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা TLV2332ID — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose TLV2332ID for a low-voltage design that needs two general-purpose amplifier channels, 3 V or 5 V single-supply operation, and useful common-mode range below the negative rail. It is a strong fit for battery-powered sensor interfaces, buffered ADC inputs, compact audio preamplifiers, and embedded measurement circuits where moderate bandwidth is sufficient. TLV2332IP is the first same-family alternative to evaluate when its ordering temperature grade and qualification match the design. TLV2332U may be considered only after its orderable electrical and environmental ratings are confirmed against TLV2332ID. Do not choose a different TLV23xx member solely because it uses a similar package; members can differ materially in quiescent current, bandwidth, output swing, and stability. A dedicated comparator or rail-to-rail amplifier may be a better choice when the circuit requires faster transitions, guaranteed rail-to-rail input/output operation, or lower power consumption.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য TLV2332IP TLV2332U
Brand Texas Instruments Texas Instruments Texas Instruments
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC
Amplifier Channels 2 2 2
Maximum Supply Voltage 8 V 8 V 8 V
Gain-Bandwidth Product 525 kHz 525 kHz 525 kHz
Single-Supply Operation 3 V and 5 V 3 V and 5 V 3 V and 5 V
Common-Mode Input Range Extends below the negative supply rail Extends below the negative supply rail Extends below the negative supply rail

মূল পার্থক্যসমূহ

  • Two independent amplifiers in one 8-pin package (বনামTLV2332IP)
  • 525 kHz gain-bandwidth product (বনামTLV2332U)
  • Single-supply operation with ground-referenced input capability (বনামTLV2332IP)

ডিজাইন নোট

Keep input, feedback, and output paths short and connect decoupling capacitance close to the supply pins. High-impedance sensor inputs can pick up leakage and coupling from adjacent traces, so minimize exposed input-node area and avoid routing beneath noisy switching nodes. Ground the return path directly beneath the amplifier rather than creating a long path through signal traces.

Design for 3 V and 5 V single-supply operation, but observe the 8 V maximum supply rating. Tie the negative supply pin to circuit ground in single-supply systems and connect the positive supply pin through the normal decoupling arrangement. Confirm that signal inputs remain within the common-mode range and that output swing leaves adequate margin for the load; the below-negative-rail input capability does not imply unrestricted output swing.

Do not treat every TLV23xx amplifier as interchangeable. The TLV233x family is optimized for a combination of low power and performance, whereas other family members may differ in speed, power, output swing, or stability. When substituting an amplifier, compare the complete electrical characteristics, feedback configuration, output loading, and pin function rather than relying only on package size or the device family name.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The available manufacturer and distributor information does not explicitly state the requested compliance outcomes. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status for the exact orderable MPN before environmental qualification.

ডেটা যাচাই করা হয়েছে: 2026-11-15 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

TLV2332ID datasheet TLV2332ID pinout TLV2332ID datasheet pdf TLV2332ID equivalent TLV2332ID replacement TLV2332ID cross reference TLV2332ID vs TLV2332IP TLV2332ID footprint TLV2332ID price TLV2332ID stock Texas Instruments TLV2332ID TLV2332 dual 8V 525kHz amplifier TLV2332 sensor signal conditioning TLV2332ID application circuit

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments TLV2332ID TLV2332IP TLV2332U TLV2332 TLV233x LinCMOS operational amplifier dual amplifier analog amplifier IC semiconductor single-supply operation gain-bandwidth product common-mode input voltage input bias current negative rail signal conditioning ADC input buffering sensor interface audio preamplifier SOIC-8 surface mount low-voltage operation
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন