Texas Instruments

TLV2332IP - Dual 8V 525kHz Op Amp | Texas Instruments

MPN: TLV2332IP ✓ সক্রিয়
8 V Vdss 8-pin PDIP Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

TLV2332IP সারাংশ

The Texas Instruments TLV2332IP is a dual, low-voltage operational amplifier with an 8 V supply rating and 525 kHz gain-bandwidth product, housed in an 8-pin PDIP package. It combines two independent amplifiers with low input bias current in a LinCMOS low-voltage, medium-power design. The dual configuration allows one package to provide two amplifier channels while preserving the supply-voltage and footprint requirements of the TLV233x family.

An operational amplifier is an analog signal-processing IC that compares voltages applied to its high-impedance differential inputs and drives an output to reflect their difference. Within the broader semiconductor hierarchy, the TLV2332IP belongs to the operational-amplifier class, then to general-purpose voltage-feedback amplifiers, and finally to linear and mixed-signal integrated circuits. Its differential input stage and high output drive make it suitable for signal conditioning, amplification, filtering, and feedback control.

The primary device characteristics include dual-channel operation, an 8 V maximum supply voltage, a 525 kHz gain-bandwidth product, and low input bias current. The low bias current reduces the error introduced when the amplifier is driven by a high-impedance source. Its 525 kHz bandwidth supports applications requiring moderate-frequency closed-loop response without operating as a high-speed precision amplifier.

The TLV233x family uses a LinCMOS low-voltage, medium-power architecture intended for single-supply operation. A single-supply configuration means the amplifier can operate with its negative input and supply pins connected to ground while processing signals referenced to a positive rail. This is useful in battery-powered and embedded systems where generating a negative supply would be impractical. Designers should still observe the complete power-supply and common-mode limits in the manufacturer datasheet.

Typical applications include sensor-signal conditioning, low-frequency active filters, audio preamplification, general-purpose buffer stages, and embedded analog signal chains. Its dual-channel layout can simplify boards requiring two modest-bandwidth amplification functions, while its PDIP package remains convenient for through-hole prototypes, educational designs, and manually assembled industrial control boards.

When using the TLV2332IP, connect the unused amplifier channel to a stable common-mode level close to the configured signal operating point. Confirm the maximum input and output voltage excursions, supply current, output-drive capability, and stability requirements against the manufacturer datasheet before finalizing the circuit. Decoupling capacitors should be placed close to the supply pins to control impedance in the power-distribution network.

This product record combines the TLV2332 family specifications, package details, pin assignment, sourcing workflow, and practical selection guidance in one engineering reference. It supports faster design decisions while directing engineers to the manufacturer datasheet for final electrical limits, test conditions, and application-specific validation.

এর জন্য ড্রপ-ইন বিকল্প TLV2332IP — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible TLV2332IP (একই form factor এবং footprint) — পার্থক্য রয়েছে Amplifier Type, Mounting Type.

Texas Instruments
Amplifier Type: Dual operational amplifier
Mounting Type: Surface mount
এর সাথে তুলনা করুন TLV2332IP →

TLV2332IPG4

✅ ড্রপ-ইন
📦 PDIP-8
Same 8 V supply rating, 525 kHz gain-bandwidth product, dual-channel architecture, and 8-pin PDIP footprint; ordering and marking suffix differs with 0% change in the stated headline electrical ratings.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

TLV2332IPE4

✅ ড্রপ-ইন
📦 PDIP-8
Same 8 V supply rating, 525 kHz gain-bandwidth product, dual-channel architecture, and 8-pin PDIP footprint; ordering code differs with 0% change in the stated headline electrical ratings.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

TLV2332IP সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Amplifier Type Dual general-purpose operational amplifier
Number of Channels 2 channels
Maximum Supply Voltage 8 V
Gain-Bandwidth Product 525 kHz
Process Technology LinCMOS
Power Class Low-voltage medium-power
Supply Configuration Single-supply capable
Package Type 8-pin PDIP
Package Pin Count 8 pins
মাউন্টিং টাইপ Through-hole

TLV2332IP পিন কনফিগারেশন

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
পিন 1 1OUT — Output of amplifier channel 1
পিন 2 1IN− — Inverting input of amplifier channel 1
পিন 3 1IN+ — Non-inverting input of amplifier channel 1
পিন 4 V− — Negative supply connection
পিন 5 2IN+ — Non-inverting input of amplifier channel 2
পিন 6 2IN− — Inverting input of amplifier channel 2
পিন 7 2OUT — Output of amplifier channel 2
পিন 8 V+ — Positive supply connection

সাধারণ ব্যবহার

TLV2332IP এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Low-Voltage Sensor Signal Conditioning, Battery-Powered Embedded Instrumentation, Active Audio Preamplifier, General-Purpose Active Filter, Industrial Control Interface, Voltage Buffer and Level Interface.

🧩

Low-Voltage Sensor Signal Conditioning

The TLV2332IP fits sensor front ends where a low-bias-current input stage preserves weak signals from resistive or high-impedance sensors. Its dual architecture can amplify one sensor channel while the second channel provides buffering, level shifting, or active filtering on the same 8 V rail. The 525 kHz gain-bandwidth product is appropriate for low-to-moderate-frequency sensor dynamics rather than wideband pulse capture. In a practical circuit, bias each input within the allowed common-mode range and place input and feedback components close to the package pins. Verify offset, bias-current, noise, and common-mode limits against the manufacturer datasheet for the selected sensor impedance.

🔧

Battery-Powered Embedded Instrumentation

The TLV2332IP is useful in battery-powered embedded instrumentation because it is designed for low-voltage, single-supply operation and combines two amplifiers in one 8-pin PDIP package. One channel can amplify a transducer signal while the other creates a buffered reference or performs gain conversion for an ADC input. Its 525 kHz gain-bandwidth product handles modest measurement bandwidth while keeping the design electrically simple. Confirm the operating and output common-mode limits over the full battery-discharge range, and terminate unused inputs predictably. The PDIP package also makes the device practical for prototypes assembled with through-hole components.

🎧

Active Audio Preamplifier

The TLV2332IP can implement a small-signal dual-channel audio preamplifier when the source impedance, gain, and bandwidth fit the device's low-voltage operating characteristics. Its two independent channels support stereo or balanced signal paths without requiring two separate packages. The 525 kHz gain-bandwidth product supports audio-band amplification, while the 8 V ceiling permits operation from a compact supply below that limit. Keep input and feedback impedances appropriate for low-noise operation, and confirm output swing and drive capability at the intended load. An RC network may be added at each input for impedance limiting and high-frequency noise control.

🌐

General-Purpose Active Filter

The TLV2332IP is appropriate for first- or second-order active filters built around its two amplifier channels. The 525 kHz gain-bandwidth product provides useful closed-loop bandwidth for low-frequency cutoff and center-frequency calculations, while low input bias current reduces errors with high-impedance RC networks. Each channel may implement a different filter section, allowing a dual-stage low-pass, high-pass, or band-pass arrangement on one PCB. Calculate resistor tolerances, capacitor stability, and noise gain using the datasheet's stated gain-bandwidth and output-drive characteristics. Keep the timing capacitors close to their associated pins to limit parasitic effects.

🏭

Industrial Control Interface

The TLV2332IP can condition low-level control signals in industrial equipment when its exact operating-temperature suffix is acceptable for the installation. One channel may amplify a feedback or command signal, while the other buffers a reference for an ADC or comparator. The dual PDIP package reduces component count on through-hole control boards, and the 525 kHz bandwidth covers many slow industrial control loops. Confirm the suffix-specific temperature rating, supply limits, and electrical characteristics before production release. Use stable reference points, controlled grounding, and supply-decoupling close to the IC to prevent switching transients from affecting the measured signal.

⚡

Voltage Buffer and Level Interface

The TLV2332IP can serve as a voltage buffer when the source presents a load that would otherwise distort a divider or measurement node. Its low input bias current helps preserve the voltage across high-impedance networks, and the dual configuration allows simultaneous buffering of a signal and reference. The 525 kHz gain-bandwidth product is suitable for modest closed-loop bandwidth and avoids unnecessary complexity for slow control signals. Confirm that the buffered voltage and output excursions remain within the common-mode and output-swing limits. Use a resistor near the output when driving capacitive loads or long PCB traces.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

TLV2332IPG4 Same-family dual signal-conditioning amplifier ব্যবহৃত হয়: Low-Voltage Sensor Signal Conditioning, Battery-Powered Embedded Instrumentation, Active Audio Preamplifier, General-Purpose Active Filter, Industrial Control Interface, Voltage Buffer and Level Interface TLV2332IPE4 Same-family dual signal-conditioning amplifier ব্যবহৃত হয়: Low-Voltage Sensor Signal Conditioning, Battery-Powered Embedded Instrumentation, Active Audio Preamplifier, General-Purpose Active Filter, Industrial Control Interface, Voltage Buffer and Level Interface
What is the operating voltage of TLV2332IP?
The TLV2332IP supports a maximum supply voltage of 8 V and is designed for low-voltage, single-supply operation. According to the Texas Instruments TLV2332 datasheet, the device belongs to the LinCMOS low-voltage, medium-power operational-amplifier family. Use the complete datasheet electrical-characteristics table when confirming absolute maximum ratings, common-mode limits, and output-swing limits for the selected ambient temperature.
What are the key specifications of TLV2332IP that engineers should know?
The TLV2332IP is a dual operational amplifier with an 8 V maximum supply voltage, a 525 kHz gain-bandwidth product, low input bias current, and an 8-pin PDIP package. Texas Instruments describes the device as a low-voltage, medium-power LinCMOS part for general-purpose amplification. These characteristics place it between low-power micropower amplifiers and wider-bandwidth high-speed operational amplifiers.
Where can I download the TLV2332IP datasheet PDF?
The official TLV2332IP datasheet PDF is available from the Texas Instruments product page at https://www.ti.com/lit/gpn/TLV2332. The document contains the family description, electrical characteristics, typical-performance plots, pin configuration, application information, and ordering information. Use the manufacturer copy for design sign-off because distributor-hosted copies can reflect an older document revision.
Where can I find the TLV2332IP pinout?
The TLV2332IP uses an 8-pin PDIP package containing two independent operational amplifiers. The standard dual-op-amp assignments are OUT1 on pin 1, IN1− on pin 2, IN1+ on pin 3, V− on pin 4, IN2+ on pin 5, IN2− on pin 6, OUT2 on pin 7, and V+ on pin 8. Confirm the final pin description table in the Texas Instruments datasheet before laying out a PCB.
What can replace the TLV2332IP on the same 8-pin PDIP footprint?
The closest documented drop-in choices in the TLV2332 family are TLV2332IPG4 and TLV2332IPE4, which retain the same dual-amplifier architecture, 8 V supply rating, 525 kHz gain-bandwidth product, and 8-pin PDIP package. Their key differences are ordering, environmental, or marking options rather than core voltage and bandwidth ratings. Verify the suffix-specific temperature range and qualification before substitution.
Is TLV2332IPG4 the same as TLV2332IP?
TLV2332IPG4 is an ordering variant of the TLV2332 dual operational amplifier with the same stated 8 V supply rating, 525 kHz gain-bandwidth product, and PDIP package. The primary difference is the device ordering or marking code rather than the headline electrical ratings. Because suffix-specific operating-temperature and qualification requirements can differ, inspect the manufacturer part-details page for the exact suffix before treating them as interchangeable.
TLV2332IP vs TLV2332IPG4 - which is better for an industrial control board?
TLV2332IPG4 is the better candidate when its suffix-specific temperature rating and qualification satisfy the industrial-control requirement, because it preserves the TLV2332IP core architecture and 8-pin PDIP footprint. Both devices are dual amplifiers with an 8 V supply rating and 525 kHz gain-bandwidth product. The decision should be based on the industrial temperature grade and current manufacturer lifecycle information, not on bandwidth, which is unchanged.
When should I choose TLV2332IP over TLV2332IPG4?
Choose TLV2332IP when its listed operating-temperature grade, lifecycle status, and ordering configuration match the board requirements and TLV2332IPG4 offers no needed qualification or marking benefit. Both use the same 8-pin PDIP package and provide two general-purpose amplifiers with the same stated 8 V and 525 kHz headline ratings. For safety-critical or tightly controlled production builds, verify the exact suffix against the current manufacturer datasheet.
Is TLV2332IP suitable for low-voltage sensor signal conditioning?
The TLV2332IP is suitable for low-voltage sensor conditioning when the sensor signal remains inside the amplifier's specified common-mode and output ranges. Its low input bias current is advantageous for high-impedance sensors, while the 525 kHz gain-bandwidth product supports low-to-moderate-frequency conditioning. Add suitable input filtering and verify noise, offset, and bias-current requirements for the particular sensor.
What is the lead time for TLV2332IP?
Current lead time and available production quantity should be requested through the Request a Quote form on this page. The Texas Instruments product page identifies the TLV2332 family and provides part-specific ordering information, while real-time stock can vary by region, package quantity, and manufacturing schedule. Providing the target quantity and assembly packaging requirements will allow a more useful allocation response.
Is TLV2332IP in stock?
Current TLV2332IP inventory should be checked through the Request a Quote form on this page because availability changes with order quantity and procurement timing. The exact orderable device is the dual amplifier in an 8-pin PDIP package. Include your required quantity, acceptable shipment date, and reel, tube, or other delivery preference when requesting an allocation.
What is the price of TLV2332IP?
Use the Request a Quote form on this page for a current TLV2332IP quotation. The form supports quantity-based sourcing and avoids presenting a stale catalog figure as the active market price. For engineering comparisons, focus on the device suffix, PDIP package, operating-temperature grade, and quantity break because those factors determine whether one listing is directly comparable with another.
Where can I buy TLV2332IP online?
The TLV2332IP can be requested through the Request a Quote form on this XAIPART page. Include the exact MPN, target quantity, required operating-temperature grade, and preferred delivery format. The part is an 8-pin PDIP dual operational amplifier, so the quotation should be tied to that package and suffix rather than to the TSSOP or other TLV2332 order codes.
Can TLV2332IP drive a capacitive load?
The TLV2332IP can be used with capacitive loads only when the capacitance, loop gain, output amplitude, and stability margin remain within the limits stated in the manufacturer datasheet. Its 525 kHz gain-bandwidth product supports moderate closed-loop bandwidth, but capacitive loading can create oscillation or reduce phase margin. Keep output traces short and add an isolation resistor when the load requires it.
How should an unused TLV2332IP amplifier channel be configured?
An unused TLV2332IP channel should be configured as a stable voltage follower with its input tied to a common-mode voltage inside the amplifier's operating range. Do not leave either input floating because input bias current can move the output toward an unpredictable rail. The Texas Instruments datasheet generally describes this practice for unused operational-amplifier channels.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা TLV2332IP — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose TLV2332IP when you need a dual, low-voltage general-purpose operational amplifier in an 8-pin PDIP package and its specified temperature and lifecycle conditions match the product. TLV2332IPG4 is the closest same-family choice when that ordering variant is preferred for procurement or documentation, while TLV2332IPE4 offers another same-footprint ordering path. These alternatives retain the stated 8 V supply rating, 525 kHz gain-bandwidth product, and dual-channel architecture, so the decisive checks are suffix-specific temperature grade, qualification, marking, lifecycle status, and current orderability. Do not choose a TSSOP or other surface-mount order code for an existing PDIP board. For designs requiring higher bandwidth, lower noise, greater output drive, or a wider supply range, redesign around a more suitable amplifier rather than treating a different package or functional family as a drop-in replacement.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য TLV2332IPG4 TLV2332IPE4
Brand Texas Instruments Texas Instruments Texas Instruments
Package PDIP-8 PDIP-8 PDIP-8
Number of Channels 2 channels 2 channels 2 channels
Maximum Supply Voltage 8 V 8 V 8 V
Gain-Bandwidth Product 525 kHz 525 kHz 525 kHz
Process Technology LinCMOS LinCMOS LinCMOS
Power Class Low-voltage medium-power Low-voltage medium-power Low-voltage medium-power
Input Bias Current Low input bias current Low input bias current Low input bias current
General-Purpose Classification Standard general-purpose amplifier Standard general-purpose amplifier Standard general-purpose amplifier
Special Ordering Feature Base TLV2332IP ordering code G4 ordering code E4 ordering code

মূল পার্থক্যসমূহ

  • Maintains the same core voltage and bandwidth ratings as the target (বনামTLV2332IPG4)
  • Provides a direct same-footprint sourcing option (বনামTLV2332IPE4)
  • Combines two general-purpose amplifier channels in one through-hole package (বনামTLV2332IPG4)

ডিজাইন নোট

Place the supply-decoupling network close to pins 4 and 8, with the shortest practical return path to the ground reference. Because this is a single-supply-capable device, connect pin 4 to the circuit's ground reference and ensure that signal excursions remain inside the specified common-mode range. Verify the complete operating supply range, input limits, output swing, and output-current capability from the manufacturer datasheet rather than assuming that the 8 V ceiling defines every permitted condition.

Route the two amplifier channels with short feedback paths and keep high-impedance input nodes physically small to reduce leakage, interference, and parasitic capacitance. Place input and feedback resistors close to their associated pins, and avoid sharing narrow copper paths between sensitive input and output nets. For a dual package, maintain consistent grounding under both channels because unequal return paths can degrade channel-to-channel performance even when each amplifier is configured correctly.

Do not allow either input of an unused channel to float. Tie the unused amplifier as a voltage follower with its input connected to a stable common-mode point inside the operating range, following the unused-circuit guidance in the manufacturer datasheet. Also avoid substituting the 8-pin TSSOP TLV2332 order code for this PDIP footprint, and do not apply an 8 V rail without checking absolute maximum and operating-limit conditions.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The manufacturer product page and datasheet landing pages do not provide explicit compliance results in the supplied records. The suffix-specific qualification and environmental requirements must be checked on the Texas Instruments part-details page before production release.

ডেটা যাচাই করা হয়েছে: 2026-11-15 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

TLV2332IP datasheet TLV2332IP specifications TLV2332IP pinout TLV2332IP datasheet pdf TLV2332IP PDIP pinout Texas Instruments TLV2332IP TLV2332IP equivalent TLV2332IP replacement TLV2332IP vs TLV2332IPG4 TLV2332IP price TLV2332IP stock TLV2332IP application circuit

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments TLV2332IP TLV2332IPG4 TLV2332IPE4 TLV2332 TLV233x dual operational amplifier voltage-feedback amplifier general-purpose amplifier linear integrated circuit LinCMOS 525 kHz gain-bandwidth product 8 V supply voltage low input bias current single-supply operation PDIP-8 DIP package through-hole mounting sensor signal conditioning active filter audio preamplifier industrial control interface voltage buffer power supply decoupling
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন