TPA301DRG4 - 350mW Mono Class-AB Amplifier | Texas Instruments
MPN: TPA301DRG4 ✓ সক্রিয়TPA301DRG4 সারাংশ
An audio power amplifier is an integrated circuit that increases the voltage and current capability of an audio signal so that a speaker can produce usable sound. The TPA301 belongs to the Class-AB amplifier category within the broader linear audio amplifier hierarchy. Class-AB operation provides a practical compromise between output efficiency and low crossover distortion, making this device appropriate for portable consumer products, small speakers, portable audio equipment, and low-cost consumer electronics.
The manufacturer describes the TPA301 as a 350 mW mono audio power amplifier with operation specified for 3.3 V and 5 V supplies. The device includes thermal and short-circuit protection and is optimized for compatibility across 3.3 V and 5 V systems. Its shutdown-mode quiescent current is specified as ultra-low, which helps reduce standby power consumption in portable equipment. The amplifier also uses a bridge-tied-load configuration when driving an internal speaker.
The TPA301DRG4 uses an 8-pin SOIC package and is identified by the DRG4 ordering suffix. The manufacturer product page identifies the device as a 350 mW, mono, Class-AB audio amplifier. The product family is suitable for compact products where a single audio channel is required, such as personal audio players, portable speakers, alarm devices, small appliances, and auxiliary audio products.
When designing a circuit around the TPA301DRG4, confirm the supply voltage, speaker impedance, output-power requirement, and the manufacturer’s recommended input and bypass capacitors. The device’s bridge-tied-load output arrangement determines which output nodes are used with the speaker. Decoupling capacitors should be placed close to the supply pins, while the speaker wiring and ground return should be routed to minimize noise and unintended coupling into the audio path.
This page combines the manufacturer product information, distributor listings, package details, and application guidance with practical design notes and verified substitution information. Use the Texas Instruments TPA301 product page and datasheet as the authoritative references for pin functions, recommended application circuits, absolute maximum ratings, thermal limits, and production ordering information.
এর জন্য ড্রপ-ইন বিকল্প TPA301DRG4 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible TPA301DRG4 (একই form factor এবং footprint) — পার্থক্য রয়েছে Product Type, Shutdown Quiescent Current, Output Configuration.
TPA301DR
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →TPA301D
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →LM386MX-1
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
TPA301DRG4 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | Mono Class-AB audio power amplifier |
| Rated Output Power | 350 mW |
| আউটপুট কনফিগারেশন | Mono bridge-tied load (BTL) |
| সাপ্লাই ভোল্টেজ | 3.3 V to 5 V |
| Power-Supply Compatibility | 3.3 V and 5 V operation |
| Shutdown Quiescent Current | 0.15 uA |
| Protection | Thermal and short-circuit protection |
| প্যাকেজ | 8-pin SOIC |
| Package Code | SOP |
| Terminal Count | 8 terminals |
| মাউন্টিং টাইপ | Surface mount |
| Terminal Form | Gull wing |
| Temperature Grade | Industrial |
| Manufacturer | Texas Instruments |
TPA301DRG4 sop পিন কনফিগারেশন গাইড
TPA301DRG4 (sop প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি TPA301DRG4.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
TPA301DRG4 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Portable Mono Speaker, Personal Audio Player, Battery-Powered Appliance, Low-Cost Consumer Audio Product, Audio Feedback and Alert Device, Industrial Audible Indicator.
Portable Mono Speaker
The TPA301DRG4 fits compact portable speakers because it provides up to 350 mW of mono Class-AB output and supports both 3.3 V and 5 V supply levels. The device can drive a small internal speaker through its bridge-tied-load arrangement without requiring a separate discrete output stage. Its 0.15 uA shutdown quiescent current is particularly useful when the product spends substantial time switched off. The key design checks are speaker impedance, clipping level, peak current, and the heat generated during sustained playback.
সুপারিশকৃত
Personal Audio Player
A personal audio player can use the TPA301DRG4 to convert a low-level mono audio signal into a bridge-tied-load output suitable for an internal speaker. Its 350 mW rating provides useful output for small transducers while retaining compatibility with common 3.3 V and 5 V portable rails. The amplifier should be placed close to the speaker connection, with local supply bypassing and short output routing to reduce noise pickup and distortion.
সুপারিশকৃত
Battery-Powered Appliance
The TPA301DRG4 is suitable for battery-powered household appliances that require one low-power audio alert or feedback channel. Operation from 3.3 V or 5 V supports common portable power architectures, while the 350 mW Class-AB output is adequate for a small speaker. The 0.15 uA shutdown quiescent current limits standby consumption, although the complete power budget must also include the active operating current and any upstream converter losses.
সুপারিশকৃত
Low-Cost Consumer Audio Product
The TPA301DRG4 provides a compact audio-output solution for low-cost consumer products where one amplified channel is sufficient. Its 8-pin SOIC package supports conventional surface-mount assembly, while operation at 3.3 V and 5 V reduces the need for multiple amplifier variants. Designers should follow the manufacturer’s recommended input, supply, and output network and validate distortion, thermal behavior, and startup timing for the finished enclosure and speaker.
সুপারিশকৃত
Audio Feedback and Alert Device
The TPA301DRG4 can produce audible prompts, confirmation tones, or simple alert signals in compact embedded products. The 350 mW mono output gives a small speaker more usable level than a raw logic output, and the bridge-tied-load topology can eliminate a coupling capacitor when the manufacturer’s recommended configuration is used. Verify startup behavior to prevent clicks, and place bypassing close to the IC to keep supply ripple from entering the audio path.
সুপারিশকৃত
Industrial Audible Indicator
A compact industrial module can use the TPA301DRG4 to drive an audible local indicator where a low-voltage mono amplifier is adequate. Industrial-temperature identification appears in distributor product metadata, but the exact temperature limits must be confirmed in the manufacturer ordering information. The design should account for sustained-duty heating, enclosure acoustics, supply transients, and the device’s thermal and short-circuit protection rather than treating those protections as substitutes for sound-power analysis.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা TPA301DRG4 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | TPA301DR | TPA301D | LM386MX-1 |
|---|---|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Type | Mono Class-AB audio power amplifier | Mono Class-AB audio power amplifier | Mono Class-AB audio power amplifier | Mono audio power amplifier |
| Rated Output Power | 350 mW | 350 mW | 350 mW | 325 mW |
মূল পার্থক্যসমূহ
- Matches common portable supply levels (বনামLM386MX-1)
- Provides 25 mW greater rated output power (বনামLM386MX-1)
- Uses the same-family ordering path for simplified sourcing (বনামTPA301D)
ডিজাইন নোট
Place the recommended input, supply, and bypass capacitors close to their associated TPA301DRG4 pins. Keep the two bridge-tied-load output traces short and route them away from sensitive audio input wiring. The 8-pin SOIC footprint should follow the manufacturer’s land pattern, with pin 1 orientation verified against the package drawing.
Design the supply path for the 3.3 V or 5 V operating rail identified by the manufacturer. Include local high-frequency bypassing and verify startup sequencing, shutdown behavior, and peak speaker current. The 0.15 uA shutdown quiescent current is useful for standby power, but it does not describe active consumption and should not be used as the operating-current budget.
Validate the amplifier at the maximum expected audio level and duty cycle. Class-AB dissipation depends on the supply voltage, output swing, speaker load, and signal waveform, so the 350 mW output rating alone is insufficient for thermal sizing. Use the manufacturer’s maximum-power dissipation and thermal information, and provide adequate PCB copper area for the 8-pin SOIC package.
Do not treat the DR, D, and DRG4 ordering codes as automatically identical without checking grade, reel, and marking requirements. Likewise, an SOIC-8 alternative is not automatically drop-in: verify pin names, gain network requirements, shutdown polarity, output topology, supply limits, and maximum output current before releasing a substitution for production.
কমপ্লায়েন্স তথ্য
Compliance declarations were not included in the retrieved product information. The industrial temperature-grade identification comes from distributor product metadata; confirm exact grade and ordering details with Texas Instruments.