TPA301DRG4 - 350mW Mono Class-AB Amplifier | Texas Instruments
N.º de pieza: TPA301DRG4 ✓ ActivoTPA301DRG4 Descripción general
An audio power amplifier is an integrated circuit that increases the voltage and current capability of an audio signal so that a speaker can produce usable sound. The TPA301 belongs to the Class-AB amplifier category within the broader linear audio amplifier hierarchy. Class-AB operation provides a practical compromise between output efficiency and low crossover distortion, making this device appropriate for portable consumer products, small speakers, portable audio equipment, and low-cost consumer electronics.
The manufacturer describes the TPA301 as a 350 mW mono audio power amplifier with operation specified for 3.3 V and 5 V supplies. The device includes thermal and short-circuit protection and is optimized for compatibility across 3.3 V and 5 V systems. Its shutdown-mode quiescent current is specified as ultra-low, which helps reduce standby power consumption in portable equipment. The amplifier also uses a bridge-tied-load configuration when driving an internal speaker.
The TPA301DRG4 uses an 8-pin SOIC package and is identified by the DRG4 ordering suffix. The manufacturer product page identifies the device as a 350 mW, mono, Class-AB audio amplifier. The product family is suitable for compact products where a single audio channel is required, such as personal audio players, portable speakers, alarm devices, small appliances, and auxiliary audio products.
When designing a circuit around the TPA301DRG4, confirm the supply voltage, speaker impedance, output-power requirement, and the manufacturer’s recommended input and bypass capacitors. The device’s bridge-tied-load output arrangement determines which output nodes are used with the speaker. Decoupling capacitors should be placed close to the supply pins, while the speaker wiring and ground return should be routed to minimize noise and unintended coupling into the audio path.
This page combines the manufacturer product information, distributor listings, package details, and application guidance with practical design notes and verified substitution information. Use the Texas Instruments TPA301 product page and datasheet as the authoritative references for pin functions, recommended application circuits, absolute maximum ratings, thermal limits, and production ordering information.
Alternativas directas para TPA301DRG4 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con TPA301DRG4 (mismo factor de forma y huella) — difiere en Product Type, Shutdown Quiescent Current, Output Configuration.
TPA301DR
✅ Sustitución directaConsulte el precio
Ver hoja de datos →TPA301D
✅ Sustitución directaConsulte el precio
Ver hoja de datos →LM386MX-1
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
TPA301DRG4 Valores máximos y características eléctricas
| Product Type | Mono Class-AB audio power amplifier |
| Rated Output Power | 350 mW |
| Configuración de salida | Mono bridge-tied load (BTL) |
| Tensión de alimentación | 3.3 V to 5 V |
| Power-Supply Compatibility | 3.3 V and 5 V operation |
| Shutdown Quiescent Current | 0.15 uA |
| Protection | Thermal and short-circuit protection |
| Encapsulado | 8-pin SOIC |
| Package Code | SOP |
| Terminal Count | 8 terminals |
| Tipo de montaje | Surface mount |
| Terminal Form | Gull wing |
| Temperature Grade | Industrial |
| Manufacturer | Texas Instruments |
Guía de configuración de pines de TPA301DRG4 sop
Configuración de pines para TPA301DRG4 (encapsulado sop). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.
No hay datos detallados de patillaje disponibles para TPA301DRG4.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
TPA301DRG4 es adecuado para 6 aplicacións: Portable Mono Speaker, Personal Audio Player, Battery-Powered Appliance, Low-Cost Consumer Audio Product, Audio Feedback and Alert Device, Industrial Audible Indicator.
Portable Mono Speaker
The TPA301DRG4 fits compact portable speakers because it provides up to 350 mW of mono Class-AB output and supports both 3.3 V and 5 V supply levels. The device can drive a small internal speaker through its bridge-tied-load arrangement without requiring a separate discrete output stage. Its 0.15 uA shutdown quiescent current is particularly useful when the product spends substantial time switched off. The key design checks are speaker impedance, clipping level, peak current, and the heat generated during sustained playback.
Recomendado
Personal Audio Player
A personal audio player can use the TPA301DRG4 to convert a low-level mono audio signal into a bridge-tied-load output suitable for an internal speaker. Its 350 mW rating provides useful output for small transducers while retaining compatibility with common 3.3 V and 5 V portable rails. The amplifier should be placed close to the speaker connection, with local supply bypassing and short output routing to reduce noise pickup and distortion.
Recomendado
Battery-Powered Appliance
The TPA301DRG4 is suitable for battery-powered household appliances that require one low-power audio alert or feedback channel. Operation from 3.3 V or 5 V supports common portable power architectures, while the 350 mW Class-AB output is adequate for a small speaker. The 0.15 uA shutdown quiescent current limits standby consumption, although the complete power budget must also include the active operating current and any upstream converter losses.
Recomendado
Low-Cost Consumer Audio Product
The TPA301DRG4 provides a compact audio-output solution for low-cost consumer products where one amplified channel is sufficient. Its 8-pin SOIC package supports conventional surface-mount assembly, while operation at 3.3 V and 5 V reduces the need for multiple amplifier variants. Designers should follow the manufacturer’s recommended input, supply, and output network and validate distortion, thermal behavior, and startup timing for the finished enclosure and speaker.
Recomendado
Audio Feedback and Alert Device
The TPA301DRG4 can produce audible prompts, confirmation tones, or simple alert signals in compact embedded products. The 350 mW mono output gives a small speaker more usable level than a raw logic output, and the bridge-tied-load topology can eliminate a coupling capacitor when the manufacturer’s recommended configuration is used. Verify startup behavior to prevent clicks, and place bypassing close to the IC to keep supply ripple from entering the audio path.
Recomendado
Industrial Audible Indicator
A compact industrial module can use the TPA301DRG4 to drive an audible local indicator where a low-voltage mono amplifier is adequate. Industrial-temperature identification appears in distributor product metadata, but the exact temperature limits must be confirmed in the manufacturer ordering information. The design should account for sustained-duty heating, enclosure acoustics, supply transients, and the device’s thermal and short-circuit protection rather than treating those protections as substitutes for sound-power analysis.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para TPA301DRG4 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | TPA301DR | TPA301D | LM386MX-1 |
|---|---|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Type | Mono Class-AB audio power amplifier | Mono Class-AB audio power amplifier | Mono Class-AB audio power amplifier | Mono audio power amplifier |
| Rated Output Power | 350 mW | 350 mW | 350 mW | 325 mW |
Diferenciadores clave
- Matches common portable supply levels (frente a LM386MX-1)
- Provides 25 mW greater rated output power (frente a LM386MX-1)
- Uses the same-family ordering path for simplified sourcing (frente a TPA301D)
Notas de diseño
Place the recommended input, supply, and bypass capacitors close to their associated TPA301DRG4 pins. Keep the two bridge-tied-load output traces short and route them away from sensitive audio input wiring. The 8-pin SOIC footprint should follow the manufacturer’s land pattern, with pin 1 orientation verified against the package drawing.
Design the supply path for the 3.3 V or 5 V operating rail identified by the manufacturer. Include local high-frequency bypassing and verify startup sequencing, shutdown behavior, and peak speaker current. The 0.15 uA shutdown quiescent current is useful for standby power, but it does not describe active consumption and should not be used as the operating-current budget.
Validate the amplifier at the maximum expected audio level and duty cycle. Class-AB dissipation depends on the supply voltage, output swing, speaker load, and signal waveform, so the 350 mW output rating alone is insufficient for thermal sizing. Use the manufacturer’s maximum-power dissipation and thermal information, and provide adequate PCB copper area for the 8-pin SOIC package.
Do not treat the DR, D, and DRG4 ordering codes as automatically identical without checking grade, reel, and marking requirements. Likewise, an SOIC-8 alternative is not automatically drop-in: verify pin names, gain network requirements, shutdown polarity, output topology, supply limits, and maximum output current before releasing a substitution for production.
Información de cumplimiento
Compliance declarations were not included in the retrieved product information. The industrial temperature-grade identification comes from distributor product metadata; confirm exact grade and ordering details with Texas Instruments.