Texas Instruments

TPA301DRG4 - 350mW Mono Class-AB Amplifier | Texas Instruments

料号: TPA301DRG4 ✓ 量产中
3.3 V to 5 V Vdss 0.15 uA Id 8-pin SOIC Package
最小起订量: 1 |

TPA301DRG4 概述

The Texas Instruments TPA301DRG4 is a 350 mW mono Class-AB audio power amplifier designed for low-voltage portable equipment and compact audio systems. The device supports operation from a low-voltage supply and is available in an 8-pin SOIC package. The TPA301 family is intended for applications where a small, efficient audio output stage is required to drive an internal speaker or other low-impedance audio load.

An audio power amplifier is an integrated circuit that increases the voltage and current capability of an audio signal so that a speaker can produce usable sound. The TPA301 belongs to the Class-AB amplifier category within the broader linear audio amplifier hierarchy. Class-AB operation provides a practical compromise between output efficiency and low crossover distortion, making this device appropriate for portable consumer products, small speakers, portable audio equipment, and low-cost consumer electronics.

The manufacturer describes the TPA301 as a 350 mW mono audio power amplifier with operation specified for 3.3 V and 5 V supplies. The device includes thermal and short-circuit protection and is optimized for compatibility across 3.3 V and 5 V systems. Its shutdown-mode quiescent current is specified as ultra-low, which helps reduce standby power consumption in portable equipment. The amplifier also uses a bridge-tied-load configuration when driving an internal speaker.

The TPA301DRG4 uses an 8-pin SOIC package and is identified by the DRG4 ordering suffix. The manufacturer product page identifies the device as a 350 mW, mono, Class-AB audio amplifier. The product family is suitable for compact products where a single audio channel is required, such as personal audio players, portable speakers, alarm devices, small appliances, and auxiliary audio products.

When designing a circuit around the TPA301DRG4, confirm the supply voltage, speaker impedance, output-power requirement, and the manufacturer’s recommended input and bypass capacitors. The device’s bridge-tied-load output arrangement determines which output nodes are used with the speaker. Decoupling capacitors should be placed close to the supply pins, while the speaker wiring and ground return should be routed to minimize noise and unintended coupling into the audio path.

This page combines the manufacturer product information, distributor listings, package details, and application guidance with practical design notes and verified substitution information. Use the Texas Instruments TPA301 product page and datasheet as the authoritative references for pin functions, recommended application circuits, absolute maximum ratings, thermal limits, and production ordering information.

直接替换替代料: TPA301DRG4 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: TPA301DRG4 (相同外形与封装尺寸) ——差异在于 Product Type, Shutdown Quiescent Current, Output Configuration.

Texas Instruments
Product Type: Mono Class-AB audio power amplifier
Shutdown Quiescent Current: 0.15 uA
对比 TPA301DRG4 →
Texas Instruments
Product Type: Mono audio power amplifier
Shutdown Quiescent Current: 0.15 microampere
Output Configuration: Bridge-tied load (BTL), differential
对比 TPA301DRG4 →

TPA301DR

✅ 直接替换
Texas Instruments
📦 8-pin SOIC
Mono audio power amplifier · Class AB · 350 mW · 250 mW into 8 ohm BTL at less than 1% THD+N · 3.3 V and 5 V · Bridge-tied load (BTL), differential · 1 channel · 8-pin SOIC

联系询价

查看数据手册 →

TPA301D

✅ 直接替换
Texas Instruments
📦 8-pin SOIC
Mono Class-AB audio power amplifier · 350 mW · 250 mW continuous into 8 ohm BTL at less than 1% THD+N throughout the voice band · 3.3 V and 5 V · Bridge-tied load (BTL) · 1 channel, mono · 8-pin SOIC · Surface mount

联系询价

查看数据手册 →

LM386MX-1

✅ 直接替换
📦 8-pin SOIC
Cross-reference data describes the LM386MX-1 as similar; its gain voltage of 325 mW and differing electrical characteristics require pin-function and load verification.

📋 参考替代料(不在目录中)

TPA301DRG4 最大额定值与电气特性

Product Type Mono Class-AB audio power amplifier
Rated Output Power 350 mW
输出配置 Mono bridge-tied load (BTL)
电源电压 3.3 V to 5 V
Power-Supply Compatibility 3.3 V and 5 V operation
Shutdown Quiescent Current 0.15 uA
Protection Thermal and short-circuit protection
封装 8-pin SOIC
Package Code SOP
Terminal Count 8 terminals
安装类型 Surface mount
Terminal Form Gull wing
Temperature Grade Industrial
Manufacturer Texas Instruments

TPA301DRG4 sop 引脚配置指南

TPA301DRG4(sop 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

TPA301DRG4 的 sop 封装引脚图

暂无详细引脚数据: TPA301DRG4.

请参阅 数据手册 以查看完整引脚配置。

典型应用

TPA301DRG4 适用于 6 应用s: Portable Mono Speaker, Personal Audio Player, Battery-Powered Appliance, Low-Cost Consumer Audio Product, Audio Feedback and Alert Device, Industrial Audible Indicator.

📱

Portable Mono Speaker

The TPA301DRG4 fits compact portable speakers because it provides up to 350 mW of mono Class-AB output and supports both 3.3 V and 5 V supply levels. The device can drive a small internal speaker through its bridge-tied-load arrangement without requiring a separate discrete output stage. Its 0.15 uA shutdown quiescent current is particularly useful when the product spends substantial time switched off. The key design checks are speaker impedance, clipping level, peak current, and the heat generated during sustained playback.

🎧

Personal Audio Player

A personal audio player can use the TPA301DRG4 to convert a low-level mono audio signal into a bridge-tied-load output suitable for an internal speaker. Its 350 mW rating provides useful output for small transducers while retaining compatibility with common 3.3 V and 5 V portable rails. The amplifier should be placed close to the speaker connection, with local supply bypassing and short output routing to reduce noise pickup and distortion.

⚡

Battery-Powered Appliance

The TPA301DRG4 is suitable for battery-powered household appliances that require one low-power audio alert or feedback channel. Operation from 3.3 V or 5 V supports common portable power architectures, while the 350 mW Class-AB output is adequate for a small speaker. The 0.15 uA shutdown quiescent current limits standby consumption, although the complete power budget must also include the active operating current and any upstream converter losses.

🔧

Low-Cost Consumer Audio Product

The TPA301DRG4 provides a compact audio-output solution for low-cost consumer products where one amplified channel is sufficient. Its 8-pin SOIC package supports conventional surface-mount assembly, while operation at 3.3 V and 5 V reduces the need for multiple amplifier variants. Designers should follow the manufacturer’s recommended input, supply, and output network and validate distortion, thermal behavior, and startup timing for the finished enclosure and speaker.

🔔

Audio Feedback and Alert Device

The TPA301DRG4 can produce audible prompts, confirmation tones, or simple alert signals in compact embedded products. The 350 mW mono output gives a small speaker more usable level than a raw logic output, and the bridge-tied-load topology can eliminate a coupling capacitor when the manufacturer’s recommended configuration is used. Verify startup behavior to prevent clicks, and place bypassing close to the IC to keep supply ripple from entering the audio path.

🏭

Industrial Audible Indicator

A compact industrial module can use the TPA301DRG4 to drive an audible local indicator where a low-voltage mono amplifier is adequate. Industrial-temperature identification appears in distributor product metadata, but the exact temperature limits must be confirmed in the manufacturer ordering information. The design should account for sustained-duty heating, enclosure acoustics, supply transients, and the device’s thermal and short-circuit protection rather than treating those protections as substitutes for sound-power analysis.

推荐产品汇总

TPA301 Manufacturer device family 用于: Portable Mono Speaker, Personal Audio Player, Battery-Powered Appliance, Low-Cost Consumer Audio Product, Industrial Audible Indicator TPA301DR Texas Instruments 用于: Portable Mono Speaker, Battery-Powered Appliance, Audio Feedback and Alert Device TPA301D Texas Instruments 用于: Personal Audio Player, Low-Cost Consumer Audio Product, Industrial Audible Indicator LM386MX-1 Functionally similar mono audio amplifier 用于: Audio Feedback and Alert Device
What is the TPA301DRG4?
The TPA301DRG4 is a Texas Instruments 350 mW mono Class-AB audio power amplifier in an 8-pin SOIC package. According to the Texas Instruments product page, the TPA301 family is designed for low-voltage operation and is specified for 3.3 V and 5 V supplies. It is intended for compact products that need one amplified audio channel, including portable speakers and low-voltage consumer audio equipment.
What is the output power of TPA301DRG4?
The TPA301DRG4 is rated for 350 mW of mono audio output power. Texas Instruments identifies the device as a 350 mW, mono, Class-AB audio power amplifier, while distributor listings classify it as a 0.35 W mono audio amplifier. The exact output power at a particular supply voltage and speaker load must be confirmed from the manufacturer’s electrical-characteristics table for the intended operating condition.
What supply voltage does TPA301DRG4 use?
The TPA301DRG4 is designed for 3.3 V and 5 V operation. The manufacturer’s product description specifically identifies wide power-supply compatibility for these two supply levels. This makes the device suitable for portable and low-voltage systems where the main supply may change between a 3.3 V rail and a 5 V rail. Use the manufacturer’s recommended operating range and application circuit when selecting bypass capacitors.
Where can I download the TPA301DRG4 datasheet PDF?
The official TPA301 datasheet and supporting technical documentation are available from the Texas Instruments TPA301 product page at https://www.ti.com/product/TPA301. The product page identifies the data sheet as the TPA301 350 mW Mono Audio Power Amplifier datasheet, revision E. Use that manufacturer document for the exact pin list, recommended application circuit, electrical characteristics, and package drawings.
Where can I find the TPA301DRG4 pinout?
The TPA301DRG4 pinout is published in the Texas Instruments TPA301 datasheet linked from the official product page. The device uses an 8-pin SOIC package, and distributor listings also identify an 8-terminal gull-wing SOP package. Because the public search listing does not reproduce the pin-description table, use the manufacturer pin configuration and package drawing when assigning PCB tracks and selecting the exposed or no-connect pins.
Is the TPA301DRG4 suitable for portable speakers?
Yes, the TPA301DRG4 is suitable for compact portable-speaker designs operating from 3.3 V or 5 V. Its 350 mW mono Class-AB output stage is appropriate for driving a small internal speaker through a bridge-tied-load arrangement. The ultra-low 0.15 uA shutdown quiescent current also supports power-conscious portable products. Confirm speaker impedance, peak signal level, and thermal performance before finalizing the circuit.
What can replace the TPA301DRG4?
TPA301DR and TPA301D are same-manufacturer alternatives identified in the comparison results, while LM386MX-1 is a cross-brand SOIC-8 alternative listed as functionally similar. The closest drop-in choice is normally TPA301DR because it is the same TPA301 family and shares the 8-SOIC format. Confirm pin functions, supply limits, speaker-load behavior, and output power in the manufacturer datasheet before replacing the TPA301DRG4.
Is TPA301DRG4 the same as TPA301DR?
TPA301DRG4 and TPA301DR are both members of the Texas Instruments TPA301 mono audio amplifier family and are associated with the 8-pin SOIC configuration. TPA301DRG4 is the full orderable suffix for the requested grade and packaging code, while TPA301DR is the shorter family ordering designation. Treat the DRG4 suffix as orderable part-specific information and verify pinout, grade, reel configuration, and marking requirements against the manufacturer ordering table.
What is the best Texas Instruments equivalent for TPA301DRG4?
TPA301DR is the closest listed Texas Instruments equivalent for TPA301DRG4 because it belongs to the same mono Class-AB audio-amplifier family and is associated with the 8-SOIC package. TPA301D is another same-family option identified in comparison data. Neither should be treated as an automatic substitution without checking the manufacturer datasheet for pin compatibility, supply range, gain configuration, thermal limits, and ordering-code requirements.
TPA301DRG4 vs LM386MX-1: which is better for a portable mono speaker?
TPA301DRG4 is generally the closer fit for a new 3.3 V or 5 V portable mono-speaker design because Texas Instruments specifies it for those supply levels, 350 mW Class-AB output, and low shutdown quiescent current. LM386MX-1 is listed as a functionally similar SOIC-8 amplifier, but its supply range, gain structure, and load requirements differ. Choose by reviewing the full electrical specifications rather than package appearance alone.
When should I choose TPA301DRG4 over TPA301D?
Choose TPA301DRG4 when the required orderable part is specified with the DRG4 suffix or when its documented grade and packaging details match the product requirements. TPA301D is a related ordering designation in the same device family, but suffix differences can encode temperature grade, packaging, or reel configuration. For an existing PCB, use the manufacturer ordering information and label requirements to determine whether the two codes are interchangeable.
Is TPA301DRG4 suitable for a 5 V portable audio product?
Yes, the TPA301DRG4 is specifically described by Texas Instruments as compatible with 5 V operation. Its 350 mW mono Class-AB output capability is suitable for small internal speakers when the selected load and distortion limits are respected. The design should still include local supply bypassing and follow the manufacturer’s reference topology for input coupling, shutdown control, output connection, and thermal management.
What are the key specifications of TPA301DRG4 that engineers should know?
The TPA301DRG4 combines a 350 mW mono Class-AB output stage, 3.3 V and 5 V supply compatibility, an 8-pin SOIC package, bridge-tied-load operation, thermal and short-circuit protection, and 0.15 uA shutdown quiescent current. These attributes place it in the low-voltage portable-audio class. Texas Instruments’ TPA301 product page is the primary reference for operating limits and the manufacturer datasheet provides the detailed electrical characteristics.
How should decoupling and grounding be handled for TPA301DRG4?
Place the supply bypass capacitors close to the TPA301DRG4 supply and ground pins, and keep the audio output routing short to reduce susceptibility to noise pickup. The manufacturer application circuit should be used as the starting point for component values and topology. Since the bridge-tied-load output uses two output nodes, the speaker should connect between the designated outputs rather than to ground, unless the manufacturer documents another supported configuration.
How do I request a quote and lead time for TPA301DRG4?
Use the Request a Quote form on this page to request current pricing, stock confirmation, minimum order quantity, and lead time for TPA301DRG4. The Texas Instruments product page supports direct product ordering and links to ordering information. Because distribution inventory and lead times change, current commercial terms should be confirmed through the quote workflow rather than inferred from a distributor search listing.

工程参考数据: TPA301DRG4 ——对比、设计指导和合规信息。

选型指南

Choose TPA301DRG4 for a compact, single-channel audio product operating from 3.3 V or 5 V, especially when a 350 mW Class-AB output and very low 0.15 uA shutdown quiescent current are useful. TPA301DR is the closest same-family ordering alternative when the required grade, reel configuration, and marking match the manufacturer ordering table. TPA301D is another related family designation, but suffix differences must be checked before substitution. LM386MX-1 may be considered when its different gain and power characteristics satisfy the design, but it should not be treated as a blind pin-for-pin replacement. For any substitution, verify the exact pin functions, supply range, BTL output arrangement, input network, shutdown polarity, load limits, thermal limits, and package markings against the manufacturer datasheet.

与替代料对比

参数 本产品 TPA301DR TPA301D LM386MX-1
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Product Type Mono Class-AB audio power amplifier Mono Class-AB audio power amplifier Mono Class-AB audio power amplifier Mono audio power amplifier
Rated Output Power 350 mW 350 mW 350 mW 325 mW

关键差异点

  • Matches common portable supply levels (对比 LM386MX-1)
  • Provides 25 mW greater rated output power (对比 LM386MX-1)
  • Uses the same-family ordering path for simplified sourcing (对比 TPA301D)

设计说明

Place the recommended input, supply, and bypass capacitors close to their associated TPA301DRG4 pins. Keep the two bridge-tied-load output traces short and route them away from sensitive audio input wiring. The 8-pin SOIC footprint should follow the manufacturer’s land pattern, with pin 1 orientation verified against the package drawing.

Design the supply path for the 3.3 V or 5 V operating rail identified by the manufacturer. Include local high-frequency bypassing and verify startup sequencing, shutdown behavior, and peak speaker current. The 0.15 uA shutdown quiescent current is useful for standby power, but it does not describe active consumption and should not be used as the operating-current budget.

Validate the amplifier at the maximum expected audio level and duty cycle. Class-AB dissipation depends on the supply voltage, output swing, speaker load, and signal waveform, so the 350 mW output rating alone is insufficient for thermal sizing. Use the manufacturer’s maximum-power dissipation and thermal information, and provide adequate PCB copper area for the 8-pin SOIC package.

Do not treat the DR, D, and DRG4 ordering codes as automatically identical without checking grade, reel, and marking requirements. Likewise, an SOIC-8 alternative is not automatically drop-in: verify pin names, gain network requirements, shutdown polarity, output topology, supply limits, and maximum output current before releasing a substitution for production.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

Compliance declarations were not included in the retrieved product information. The industrial temperature-grade identification comes from distributor product metadata; confirm exact grade and ordering details with Texas Instruments.

相关搜索

TPA301DRG4 datasheet TPA301DRG4 pinout TPA301DRG4 datasheet pdf Texas Instruments TPA301DRG4 TPA301DRG4 350mW mono amplifier TPA301DRG4 8-SOIC package TPA301DRG4 portable speaker amplifier TPA301DRG4 equivalent TPA301DRG4 replacement TPA301DRG4 vs TPA301DR TPA301DRG4 vs LM386MX-1 TPA301DRG4 price TPA301DRG4 stock TPA301 3.3V 5V audio amplifier

相关元器件 & 术语

Texas Instruments TPA301 TPA301DRG4 TPA301DR TPA301D LM386MX-1 mono audio power amplifier Class-AB amplifier audio amplifier linear amplifier bridge-tied load BTL 350 mW output power 3.3 V operation 5 V operation shutdown quiescent current thermal protection short-circuit protection 8-pin SOIC SOIC package family surface-mount package portable speaker personal audio player battery-powered appliance audio feedback device
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情