TUSB8041RGCT - 4-Port 5Gbps USB 3.0 Hub Controller | TI
MPN: TUSB8041RGCT ✓ সক্রিয়TUSB8041RGCT সারাংশ
A USB hub controller is an interface IC that manages one upstream USB connection and multiple downstream ports. Within the semiconductor hierarchy, it is a USB interface controller, then an interface IC, then an integrated circuit. By coordinating traffic, power, and attach events across four ports, this type of device reduces the host burden associated with multiple USB peripherals.
The four downstream ports support simultaneous SuperSpeed, high-speed, and full-speed USB connections. A 5-Gbps SuperSpeed data path suits storage peripherals, docking equipment, and other bandwidth-intensive devices when the connected host and cables provide the required USB 3.0 support. The controller also includes GPIO, I2C, and SMBus connectivity for configuration, monitoring, and board-level control functions.
Power-management features include downstream port power-switch control and overcurrent protection. The 3 V to 3.6 V operating range accommodates common 3.3 V system rails, while the 0.99 V to 1.26 V range corresponds to the lower-voltage internal supply requirement. BC1.2 protocol support adds compatibility with common USB battery-charging control conventions.
Typical implementations include USB docking stations, multi-port desktop and industrial peripherals, data-storage hubs, embedded USB expansion boards, and test systems that require more than one downstream USB connection. The 64-pin VQFN keeps the controller compact while exposing four downstream ports and dedicated hub-management functions.
PCB implementation requires careful high-speed signal routing, solid supply-plane design, and thermal management around the exposed pad. Place USB differential pairs according to the manufacturer layout guidance, maintain continuous reference planes, and decouple each supply rail close to the device. This page also organizes sourcing, replacement, comparison, and application guidance around the controller's four-port, 5-Gbps architecture.
এর জন্য ড্রপ-ইন বিকল্প TUSB8041RGCT — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible TUSB8041RGCT (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Number of Downstream Ports, Function, USB Standard.
TUSB8041IRGCT
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →TUSB8041ARGCT
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →TUSB8041ARGCT
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →TUSB8041RGCT বিশেষণ
| Device Type | Four-port USB 3.0 hub controller |
| Number of Downstream Ports | 4 ports |
| SuperSpeed Maximum Data Rate | 5 Gbps |
| Supported USB Speeds | SuperSpeed USB, high-speed USB, and full-speed USB |
| Upstream Port Speed Support | Simultaneous SuperSpeed USB, high-speed USB, and full-speed USB connections |
| Digital Control Interfaces | GPIO, I2C, and SMBus |
| 3.3 V Supply Range | 3 V to 3.6 V |
| Low-Voltage Supply Range | 0.99 V to 1.26 V |
| Battery Charging Protocol | BC1.2 protocol support |
| Downstream Port Power Control | Downstream port power-switch control |
| ওভারকারেন্ট প্রোটেকশন | Supported |
| প্যাকেজ | 64-pin VQFN (RGC), 9 x 9 mm |
| মাউন্টিং টাইপ | Surface mount |
| Integrated Exposed Pad | 64-pin VQFN with exposed pad |
| Maximum USB Data Rate | 5 Gbps |
| Number of Upstream Ports | 1 port |
TUSB8041RGCT 64-pin vqfn (rgc), 9 x 9 mm পিন কনফিগারেশন গাইড
TUSB8041RGCT (64-pin vqfn (rgc), 9 x 9 mm প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি TUSB8041RGCT.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
TUSB8041RGCT এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: USB 3.0 Docking Station, Multi-Port USB Storage Hub, Industrial USB Expansion Board, Embedded USB Data Acquisition Hub, USB Test and Measurement Fixture, High-Speed USB-C Expansion Hub.
USB 3.0 Docking Station
The TUSB8041RGCT fits a docking station that must expand one host connection into four downstream USB ports. Its 5-Gbps SuperSpeed capability allows compatible storage and peripheral devices to operate at USB 3.0 rates, while high-speed and full-speed support permits mixed-speed devices on the same hub. GPIO, I2C, and SMBus provide useful paths for connector status, dock identification, and board configuration. Downstream port power-switch control and overcurrent protection support the power architecture, although external power distribution and protection components remain necessary. Use short, impedance-controlled USB routes and place the controller supply decoupling close to its pins.
সুপারিশকৃত
Multi-Port USB Storage Hub
The TUSB8041RGCT is appropriate for a storage hub that consolidates several USB devices behind one upstream port. Its 5-Gbps SuperSpeed path can support compatible external drives and enclosures, while simultaneous high-speed and full-speed operation allows legacy peripherals to remain connected. Four downstream ports reduce host-controller demand and simplify common hub layouts. Power-switch control and overcurrent protection are particularly important when several storage devices can start or operate concurrently. The system must budget each port's electrical load, implement approved USB power distribution, and route SuperSpeed differential pairs as controlled-impedance transmission lines on a continuous reference plane.
সুপারিশকৃত
Industrial USB Expansion Board
The TUSB8041RGCT can form the center of an industrial USB expansion board that exposes four downstream ports to external instruments, service tools, or data-acquisition equipment. The controller's GPIO, I2C, and SMBus interfaces support configuration and monitoring beyond basic USB traffic. Its 3 V to 3.6 V operating range and separate 0.99 V to 1.26 V supply requirement should be reconciled with the board's power tree and sequencing strategy. For an extended-temperature enclosure, compare the commercial TUSB8041RGCT with TUSB8041IRGCT. Layout should preserve USB impedance continuity, isolate noisy analog sections, and provide effective decoupling and exposed-pad thermal relief.
সুপারিশকৃত
Embedded USB Data Acquisition Hub
The TUSB8041RGCT suits an embedded data-acquisition system where several measurement instruments or sensor adapters need one host interface. A 5-Gbps SuperSpeed link can carry substantial synchronized traffic, while USB 2.0 device support broadens instrument compatibility. The GPIO, I2C, and SMBus interfaces allow the hub controller to coordinate board-level functions alongside its USB role. Because power-up order can affect attached test equipment, use deterministic supply sequencing and define the behavior of downstream ports during reset. Keep high-speed traces away from switching regulators and analog front ends, and follow the manufacturer reference layout for differential impedance and return-path continuity.
সুপারিশকৃত
USB Test and Measurement Fixture
The TUSB8041RGCT is useful in a USB test fixture that requires repeatable access to multiple peripheral ports from one controller. Its four-port configuration allows firmware, instrumentation, or a connected host to exercise several devices without requiring separate host-controller resources. The 5-Gbps SuperSpeed mode is relevant to test data transfer, while high-speed and full-speed operation permits legacy devices to be included in the same fixture. Downstream power-switch control and overcurrent protection assist with safe port management, and I2C or SMBus can connect identification and control electronics. Treat every cable and accessory as a possible fault or ESD path, and validate protection, grounding, and data routing in the complete fixture.
সুপারিশকৃত
High-Speed USB-C Expansion Hub
The TUSB8041RGCT can support a USB-C expansion hub that combines a USB 3.0 upstream connection with multiple downstream USB-A or USB-C-facing ports. Its 5-Gbps SuperSpeed capability matches the data performance expected from a modern USB-C hub, while support for high-speed and full-speed devices accommodates mixed accessories. Four downstream ports simplify board partitioning around connector placement, and the GPIO, I2C, and SMBus interfaces can support power-gate status, hub configuration, and system monitoring. Power delivery and USB-C orientation or role-switch requirements are separate from hub traffic and must be designed accordingly. Route SuperSpeed pairs as impedance-controlled lines and separate switching power paths from sensitive USB and reference circuitry.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা TUSB8041RGCT — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | TUSB8041IRGCT | TUSB8041ARGCT | TUSB8041A |
|---|---|---|---|---|
| Package | 64-pin RGC VQFN (9 x 9 mm) | 64-pin RGC VQFN (9 x 9 mm) | 64-pin RGC VQFN (9 x 9 mm) | 64-pin RGC VQFN (9 x 9 mm) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Device Type | Four-port USB 3.0 hub controller | Four-port USB 3.0 hub controller | Four-port USB 3.1 hub controller | TUSB8041 family hub controller |
| Downstream Port Count | 4 ports | 4 ports | 4 ports | 4 ports |
| SuperSpeed Data Rate | 5 Gbps | 5 Gbps | 5 Gbps | 5 Gbps |
| USB Speed Support | SuperSpeed, high-speed, and full-speed | SuperSpeed, high-speed, and full-speed | SuperSpeed, high-speed, and full-speed | SuperSpeed, high-speed, and full-speed |
মূল পার্থক্যসমূহ
- Industrial-temperature pin-compatible option (বনামTUSB8041IRGCT)
- Commercial-temperature choice for standard environments (বনামTUSB8041IRGCT)
- Same-footprint path for revised family members (বনামTUSB8041ARGCT)
ডিজাইন নোট
Route SuperSpeed USB differential pairs as controlled-impedance lines over a continuous reference plane and follow the Texas Instruments layout recommendations for the RGC VQFN. Keep the paired lines closely coupled, avoid unnecessary stubs, minimize layer transitions, and place required passive components close to their associated pins. Provide adequate via structures at each layer change and keep switching-regulator paths away from the USB data and clock regions.
Decouple the 3 V to 3.6 V and 0.99 V to 1.26 V supplies independently with the capacitance and ESR limits specified in the manufacturer electrical-characteristics table. Place each decoupling capacitor at the relevant power and ground pins with short return paths, and connect the 64-pin VQFN exposed pad to the appropriate ground plane using a thermal-via pattern that follows the package guidance. Verify startup sequencing and port-power behavior in the complete system.
Do not treat every TUSB8041 ordering code as an unconditional substitution. The IRGCT changes the temperature grade, the ARGCT identifies a revised family member, and package-code alternatives may change tape-and-reel or reel configuration. Before replacing TUSB8041RGCT, compare the manufacturer's ordering information, device revision, pin assignments, required external resistors, test pads, firmware behavior, and operating-temperature requirements.
Keep the hub controller away from high-current switching nodes and give each supply rail a low-impedance return path to the exposed pad. Separate noisy regulator and inductor areas from USB differential pairs, and place common-mode or filtering components near connector entry points rather than distributing them around the hub controller. Validate radiated and conducted emissions with the complete enclosure, cable set, power supply, and populated USB accessories because downstream switching behavior can affect system-level results.
কমপ্লায়েন্স তথ্য
The manufacturer product page and distributor listings do not provide explicit compliance values for this exact ordering code. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status must be confirmed for the production configuration.