Texas Instruments

TUSB8041RGCT - 4-Port 5Gbps USB 3.0 Hub Controller | TI

N.º de pieza: TUSB8041RGCT ✓ Activo
3 V to 3.6 V Vdss Supported Id 64-pin VQFN (RGC), 9 x 9 mm Package 5 Gbps Speed
MOQ: 1 |

TUSB8041RGCT Descripción general

Texas Instruments TUSB8041RGCT is a four-port USB 3.0 hub controller with 5-Gbps SuperSpeed USB operation, GPIO, I2C, and SMBus interfaces, and a 64-pin VQFN package measuring 9 x 9 mm. It supports 3 V to 3.6 V operation alongside a 0.99 V to 1.26 V internal rail and provides BC1.2 protocol support, downstream port power-switch control, and overcurrent protection.

A USB hub controller is an interface IC that manages one upstream USB connection and multiple downstream ports. Within the semiconductor hierarchy, it is a USB interface controller, then an interface IC, then an integrated circuit. By coordinating traffic, power, and attach events across four ports, this type of device reduces the host burden associated with multiple USB peripherals.

The four downstream ports support simultaneous SuperSpeed, high-speed, and full-speed USB connections. A 5-Gbps SuperSpeed data path suits storage peripherals, docking equipment, and other bandwidth-intensive devices when the connected host and cables provide the required USB 3.0 support. The controller also includes GPIO, I2C, and SMBus connectivity for configuration, monitoring, and board-level control functions.

Power-management features include downstream port power-switch control and overcurrent protection. The 3 V to 3.6 V operating range accommodates common 3.3 V system rails, while the 0.99 V to 1.26 V range corresponds to the lower-voltage internal supply requirement. BC1.2 protocol support adds compatibility with common USB battery-charging control conventions.

Typical implementations include USB docking stations, multi-port desktop and industrial peripherals, data-storage hubs, embedded USB expansion boards, and test systems that require more than one downstream USB connection. The 64-pin VQFN keeps the controller compact while exposing four downstream ports and dedicated hub-management functions.

PCB implementation requires careful high-speed signal routing, solid supply-plane design, and thermal management around the exposed pad. Place USB differential pairs according to the manufacturer layout guidance, maintain continuous reference planes, and decouple each supply rail close to the device. This page also organizes sourcing, replacement, comparison, and application guidance around the controller's four-port, 5-Gbps architecture.

Alternativas directas para TUSB8041RGCT — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con TUSB8041RGCT (mismo factor de forma y huella) — difiere en Package, Number of Downstream Ports, Function, USB Standard.

Texas Instruments
Package: 64-pin VQFN (RGC) 9x9 mm with exposed thermal pad
Number of Downstream Ports: 4
Function: 4-Port SuperSpeed USB 3.1 Gen1 Hub Controller
Comparar con TUSB8041RGCT →
Texas Instruments
Package: 64-VQFN (RGC), 9x9 mm
Number of Downstream Ports: 4
Function: 4-port SuperSpeed USB 3.0 hub controller
Comparar con TUSB8041RGCT →

TUSB8041IRGCT

✅ Sustitución directa
Texas Instruments
📦 64-pin RGC VQFN (9 x 9 mm)
4-port SuperSpeed USB 3.0 hub controller · USB 3.0 (backward compatible with USB 2.0 / USB 1.1) · 4 · 5 Gbps (SuperSpeed) · GPIO, I2C, SMBus · 1.10 V, 3.30 V · -40C to +85C (industrial) · 64-VQFN (RGC), 9x9 mm

Consulte el precio

Ver hoja de datos →

TUSB8041ARGCT

✅ Sustitución directa
Texas Instruments
📦 64-pin RGC VQFN (9 x 9 mm)
4-Port SuperSpeed USB 3.1 Gen1 Hub Controller · USB 3.1 Gen1 / USB 3.0 (5 Gbps SuperSpeed, plus USB 2.0 LS/FS/HS) · 4 · 1x USB 3.1 Gen1 (Type-A or Type-C receptacle) · 5 Gbps · 480 Mbps · GPIO, I2C, SMBus, OTP ROM, I2C EEPROM · 3.3 V (single rail; internal 1.1 V core LDO)

Consulte el precio

Ver hoja de datos →

TUSB8041ARGCT

✅ Sustitución directa
Texas Instruments
📦 64-pin RGC VQFN (9 x 9 mm)
4-Port SuperSpeed USB 3.1 Gen1 Hub Controller · USB 3.1 Gen1 / USB 3.0 (5 Gbps SuperSpeed, plus USB 2.0 LS/FS/HS) · 4 · 1x USB 3.1 Gen1 (Type-A or Type-C receptacle) · 5 Gbps · 480 Mbps · GPIO, I2C, SMBus, OTP ROM, I2C EEPROM · 3.3 V (single rail; internal 1.1 V core LDO)

Consulte el precio

Ver hoja de datos →

TUSB8041RGCT Especificaciones

Device Type Four-port USB 3.0 hub controller
Number of Downstream Ports 4 ports
SuperSpeed Maximum Data Rate 5 Gbps
Supported USB Speeds SuperSpeed USB, high-speed USB, and full-speed USB
Upstream Port Speed Support Simultaneous SuperSpeed USB, high-speed USB, and full-speed USB connections
Digital Control Interfaces GPIO, I2C, and SMBus
3.3 V Supply Range 3 V to 3.6 V
Low-Voltage Supply Range 0.99 V to 1.26 V
Battery Charging Protocol BC1.2 protocol support
Downstream Port Power Control Downstream port power-switch control
Protección contra sobrecorriente Supported
Encapsulado 64-pin VQFN (RGC), 9 x 9 mm
Tipo de montaje Surface mount
Integrated Exposed Pad 64-pin VQFN with exposed pad
Maximum USB Data Rate 5 Gbps
Number of Upstream Ports 1 port

Guía de configuración de pines de TUSB8041RGCT 64-pin vqfn (rgc), 9 x 9 mm

Configuración de pines para TUSB8041RGCT (encapsulado 64-pin vqfn (rgc), 9 x 9 mm). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 64-pin vqfn (rgc), 9 x 9 mm para TUSB8041RGCT

No hay datos detallados de patillaje disponibles para TUSB8041RGCT.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

TUSB8041RGCT es adecuado para 6 aplicacións: USB 3.0 Docking Station, Multi-Port USB Storage Hub, Industrial USB Expansion Board, Embedded USB Data Acquisition Hub, USB Test and Measurement Fixture, High-Speed USB-C Expansion Hub.

🔌

USB 3.0 Docking Station

The TUSB8041RGCT fits a docking station that must expand one host connection into four downstream USB ports. Its 5-Gbps SuperSpeed capability allows compatible storage and peripheral devices to operate at USB 3.0 rates, while high-speed and full-speed support permits mixed-speed devices on the same hub. GPIO, I2C, and SMBus provide useful paths for connector status, dock identification, and board configuration. Downstream port power-switch control and overcurrent protection support the power architecture, although external power distribution and protection components remain necessary. Use short, impedance-controlled USB routes and place the controller supply decoupling close to its pins.

💾

Multi-Port USB Storage Hub

The TUSB8041RGCT is appropriate for a storage hub that consolidates several USB devices behind one upstream port. Its 5-Gbps SuperSpeed path can support compatible external drives and enclosures, while simultaneous high-speed and full-speed operation allows legacy peripherals to remain connected. Four downstream ports reduce host-controller demand and simplify common hub layouts. Power-switch control and overcurrent protection are particularly important when several storage devices can start or operate concurrently. The system must budget each port's electrical load, implement approved USB power distribution, and route SuperSpeed differential pairs as controlled-impedance transmission lines on a continuous reference plane.

🏭

Industrial USB Expansion Board

The TUSB8041RGCT can form the center of an industrial USB expansion board that exposes four downstream ports to external instruments, service tools, or data-acquisition equipment. The controller's GPIO, I2C, and SMBus interfaces support configuration and monitoring beyond basic USB traffic. Its 3 V to 3.6 V operating range and separate 0.99 V to 1.26 V supply requirement should be reconciled with the board's power tree and sequencing strategy. For an extended-temperature enclosure, compare the commercial TUSB8041RGCT with TUSB8041IRGCT. Layout should preserve USB impedance continuity, isolate noisy analog sections, and provide effective decoupling and exposed-pad thermal relief.

📊

Embedded USB Data Acquisition Hub

The TUSB8041RGCT suits an embedded data-acquisition system where several measurement instruments or sensor adapters need one host interface. A 5-Gbps SuperSpeed link can carry substantial synchronized traffic, while USB 2.0 device support broadens instrument compatibility. The GPIO, I2C, and SMBus interfaces allow the hub controller to coordinate board-level functions alongside its USB role. Because power-up order can affect attached test equipment, use deterministic supply sequencing and define the behavior of downstream ports during reset. Keep high-speed traces away from switching regulators and analog front ends, and follow the manufacturer reference layout for differential impedance and return-path continuity.

🧪

USB Test and Measurement Fixture

The TUSB8041RGCT is useful in a USB test fixture that requires repeatable access to multiple peripheral ports from one controller. Its four-port configuration allows firmware, instrumentation, or a connected host to exercise several devices without requiring separate host-controller resources. The 5-Gbps SuperSpeed mode is relevant to test data transfer, while high-speed and full-speed operation permits legacy devices to be included in the same fixture. Downstream power-switch control and overcurrent protection assist with safe port management, and I2C or SMBus can connect identification and control electronics. Treat every cable and accessory as a possible fault or ESD path, and validate protection, grounding, and data routing in the complete fixture.

🔗

High-Speed USB-C Expansion Hub

The TUSB8041RGCT can support a USB-C expansion hub that combines a USB 3.0 upstream connection with multiple downstream USB-A or USB-C-facing ports. Its 5-Gbps SuperSpeed capability matches the data performance expected from a modern USB-C hub, while support for high-speed and full-speed devices accommodates mixed accessories. Four downstream ports simplify board partitioning around connector placement, and the GPIO, I2C, and SMBus interfaces can support power-gate status, hub configuration, and system monitoring. Power delivery and USB-C orientation or role-switch requirements are separate from hub traffic and must be designed accordingly. Route SuperSpeed pairs as impedance-controlled lines and separate switching power paths from sensitive USB and reference circuitry.

What is the TUSB8041RGCT?
The TUSB8041RGCT is a four-port USB 3.0 hub controller from Texas Instruments with a 5-Gbps SuperSpeed interface. According to the manufacturer product page, it manages one upstream USB connection and four downstream ports while providing GPIO, I2C, and SMBus interfaces. The controller is packaged in a 64-pin RGC VQFN measuring 9 x 9 mm and includes downstream power-switch control, overcurrent protection, and BC1.2 protocol support.
How many USB ports does TUSB8041RGCT support?
The TUSB8041RGCT provides four downstream USB ports in addition to its upstream connection. According to the Texas Instruments product page, these ports support SuperSpeed, high-speed, and full-speed USB operation. SuperSpeed signaling operates at up to 5 Gbps, while the downstream port power-switch and overcurrent features provide the basic electrical management needed for a multi-port USB hub implementation.
What is the maximum USB data rate of TUSB8041RGCT?
The TUSB8041RGCT supports SuperSpeed USB operation at up to 5 Gbps. According to the manufacturer datasheet, the upstream port can provide simultaneous SuperSpeed, high-speed, and full-speed connectivity, and the downstream ports likewise support the applicable USB speed modes. Actual throughput depends on the connected devices, host controller, cable quality, protocol overhead, and workload.
Where can I download the TUSB8041RGCT datasheet PDF?
The official TUSB8041RGCT datasheet can be obtained through the Texas Instruments product page at https://www.ti.com/product/TUSB8041. The manufacturer datasheet contains the electrical characteristics, pin descriptions, application circuit, layout guidance, and ordering information needed for design review. Use the manufacturer document for final pin assignments, timing limits, absolute maximum ratings, and PCB implementation details.
Where can I find the TUSB8041RGCT pinout?
The TUSB8041RGCT pinout is located in the pin-configuration section of the Texas Instruments manufacturer datasheet. The device uses a 64-pin RGC VQFN package with an exposed pad and exposes USB, power, ground, configuration, GPIO, I2C, and SMBus functions. Use the package drawing and pin-description table together when assigning PCB nets and identifying the exposed-pad connection.
What supply voltages does TUSB8041RGCT require?
The TUSB8041RGCT operates from a 3 V to 3.6 V supply and also specifies a 0.99 V to 1.26 V low-voltage range. According to the manufacturer product information, the 3.3 V range is consistent with common hub-system rails, while the lower range supports the controller's internal operating requirement. Confirm the exact rail, decoupling, sequencing, and test conditions in the manufacturer electrical-characteristics table.
Does TUSB8041RGCT include overcurrent protection?
Yes, the TUSB8041RGCT includes downstream port power-switch control and overcurrent protection. These functions support hub implementations that need controlled distribution of power to downstream USB ports. According to the manufacturer product description, the hub also supports BC1.2 protocol behavior. External power-switch, current-limit, and USB power-distribution requirements must still be implemented according to the reference circuit.
TUSB8041RGCT vs TUSB8041IRGCT - which is better for industrial use?
The TUSB8041IRGCT is the better choice when the specified industrial temperature range of -40°C to 85°C is required. Texas Instruments describes TUSB8041RGCT as the commercial device and TUSB8041IRGCT as the industrial device. Both retain the four-port, 5-Gbps USB 3.0 hub architecture and 64-pin RGC package, so the temperature grade is the primary selection criterion rather than a footprint change.
What is the difference between TUSB8041RGCT and TUSB8041ARGCT?
TUSB8041ARGCT is an updated ordering option within the same Texas Instruments four-port USB 3.0 hub family and uses the same 64-pin RGC package arrangement. The two designations identify different device revisions, so firmware, feature, and ordering details should be checked before substitution. Their common package supports a PCB-compatible path, but an engineering review must confirm that every required hub function and operating condition remains supported.
When should I choose TUSB8041RGCT over TUSB8041IRGCT?
Choose TUSB8041RGCT for commercial-temperature USB hub designs that do not require the -40°C to 85°C industrial range. Choose TUSB8041IRGCT when the enclosure, environment, or qualification program requires that wider operating range. Both devices use the 64-pin RGC VQFN and provide the same four-port, 5-Gbps SuperSpeed hub architecture, which simplifies mechanical and PCB comparison.
Is TUSB8041RGCT suitable for a USB docking station?
The TUSB8041RGCT is suitable for a USB docking station that needs four downstream USB connections and a 5-Gbps SuperSpeed path. Its GPIO, I2C, and SMBus interfaces support configuration and board control, while downstream power-switch control and overcurrent protection assist with power management. The final design must still provide the required connectors, protection devices, supplies, routing, and USB electrical compliance.
What can replace TUSB8041RGCT?
TUSB8041IRGCT is a pin-compatible replacement candidate for TUSB8041RGCT because both use the 64-pin RGC VQFN and retain the four-port, 5-Gbps USB 3.0 hub function. The main confirmed distinction is temperature grade: TUSB8041IRGCT supports -40°C to 85°C, while TUSB8041RGCT is the commercial option. Review revision-specific functions, firmware requirements, and ordering conditions before production use.
Is TUSB8041RGCT the same as TUSB8041RGCR?
No, the final suffix identifies the shipping format rather than making the two devices functionally identical ordering choices. TUSB8041RGCT and TUSB8041RGCR use the same 64-pin RGC device family, but the ending letters distinguish the packaging configuration. Use the manufacturer's ordering information to match the required tape-and-reel or reel configuration rather than treating the two complete MPNs as interchangeable.
Is there a Texas Instruments equivalent to TUSB8041RGCT?
The closest verified Texas Instruments options are TUSB8041IRGCT, TUSB8041ARGCT, and TUSB8041A because each belongs to the TUSB8041 four-port USB 3.0 hub family. Pin and revision suitability must be confirmed in the manufacturer documentation, and environmental requirements may favor the industrial suffix. No verified cross-manufacturer part was shown to have both the same footprint and a pin-compatible function.
How do I check TUSB8041RGCT stock and lead time?
Current TUSB8041RGCT stock, lead time, and minimum order quantity should be requested through the Request a Quote form on this product page. The component is listed with a current manufacturer product page and distributor listings, but availability can change with purchasing volume and manufacturing conditions. Include the required package suffix, annual usage, and target delivery date in the request for an actionable quotation.
What are the key specifications of TUSB8041RGCT that engineers should know?
The key TUSB8041RGCT specifications are four downstream USB ports, a 5-Gbps SuperSpeed data rate, simultaneous SuperSpeed, high-speed, and full-speed support, GPIO/I2C/SMBus interfaces, and a 64-pin 9 x 9 mm RGC VQFN package. According to the Texas Instruments product information, the device also uses 3 V to 3.6 V and 0.99 V to 1.26 V supplies and includes port power control, overcurrent protection, and BC1.2 support.

Datos de referencia de ingeniería para TUSB8041RGCT — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose TUSB8041RGCT for a commercial-temperature, four-port USB 3.0 hub using the 64-pin RGC VQFN footprint. Its 5-Gbps SuperSpeed path, support for simultaneous high-speed and full-speed connections, and GPIO, I2C, and SMBus interfaces make it suitable for docks, storage hubs, embedded expansion boards, and test fixtures. Choose TUSB8041IRGCT when the design must operate from -40°C to 85°C; it retains the same package and core USB architecture, so the decision is driven by environmental requirements. Evaluate TUSB8041ARGCT when a revised family option may provide needed functions, but compare revision-specific behavior, external-resistor requirements, test pads, and ordering conditions before approving a substitution. TUSB8041A may be considered for a current family revision after the same manufacturer review. No cross-manufacturer device was verified as both pin-to-pin compatible and housed in the same footprint, so avoid selecting a competitor solely by USB port count or advertised data rate. Confirm package, electrical limits, firmware requirements, port-power design, and layout constraints on the final schematic.

Comparación con alternativas

Parámetro Este producto TUSB8041IRGCT TUSB8041ARGCT TUSB8041A
Package 64-pin RGC VQFN (9 x 9 mm) 64-pin RGC VQFN (9 x 9 mm) 64-pin RGC VQFN (9 x 9 mm) 64-pin RGC VQFN (9 x 9 mm)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Device Type Four-port USB 3.0 hub controller Four-port USB 3.0 hub controller Four-port USB 3.1 hub controller TUSB8041 family hub controller
Downstream Port Count 4 ports 4 ports 4 ports 4 ports
SuperSpeed Data Rate 5 Gbps 5 Gbps 5 Gbps 5 Gbps
USB Speed Support SuperSpeed, high-speed, and full-speed SuperSpeed, high-speed, and full-speed SuperSpeed, high-speed, and full-speed SuperSpeed, high-speed, and full-speed

Diferenciadores clave

  • Industrial-temperature pin-compatible option (frente a TUSB8041IRGCT)
  • Commercial-temperature choice for standard environments (frente a TUSB8041IRGCT)
  • Same-footprint path for revised family members (frente a TUSB8041ARGCT)

Notas de diseño

Route SuperSpeed USB differential pairs as controlled-impedance lines over a continuous reference plane and follow the Texas Instruments layout recommendations for the RGC VQFN. Keep the paired lines closely coupled, avoid unnecessary stubs, minimize layer transitions, and place required passive components close to their associated pins. Provide adequate via structures at each layer change and keep switching-regulator paths away from the USB data and clock regions.

Decouple the 3 V to 3.6 V and 0.99 V to 1.26 V supplies independently with the capacitance and ESR limits specified in the manufacturer electrical-characteristics table. Place each decoupling capacitor at the relevant power and ground pins with short return paths, and connect the 64-pin VQFN exposed pad to the appropriate ground plane using a thermal-via pattern that follows the package guidance. Verify startup sequencing and port-power behavior in the complete system.

Do not treat every TUSB8041 ordering code as an unconditional substitution. The IRGCT changes the temperature grade, the ARGCT identifies a revised family member, and package-code alternatives may change tape-and-reel or reel configuration. Before replacing TUSB8041RGCT, compare the manufacturer's ordering information, device revision, pin assignments, required external resistors, test pads, firmware behavior, and operating-temperature requirements.

Keep the hub controller away from high-current switching nodes and give each supply rail a low-impedance return path to the exposed pad. Separate noisy regulator and inductor areas from USB differential pairs, and place common-mode or filtering components near connector entry points rather than distributing them around the hub controller. Validate radiated and conducted emissions with the complete enclosure, cable set, power supply, and populated USB accessories because downstream switching behavior can affect system-level results.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The manufacturer product page and distributor listings do not provide explicit compliance values for this exact ordering code. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status must be confirmed for the production configuration.

Búsquedas relacionadas

TUSB8041RGCT datasheet TUSB8041RGCT pinout TUSB8041RGCT datasheet pdf TUSB8041RGCT schematic TUSB8041RGCT equivalent TUSB8041RGCT replacement TUSB8041RGCT cross reference TUSB8041RGCT vs TUSB8041IRGCT TUSB8041RGCT footprint TUSB8041RGCT application circuit TUSB8041RGCT price TUSB8041RGCT stock Texas Instruments TUSB8041RGCT 4 port 5Gbps USB hub controller 64 pin VQFN USB 3.0 hub

Componentes & términos relacionados

Texas Instruments TUSB8041RGCT TUSB8041IRGCT TUSB8041ARGCT TUSB8041A USB hub controller USB interface controller interface IC integrated circuit semiconductor USB 3.0 SuperSpeed USB high-speed USB full-speed USB 5 Gbps four-port USB hub GPIO I2C SMBus BC1.2 downstream port power-switch control overcurrent protection 64-pin RGC VQFN QFN family surface mount SMD
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ