Cirrus Logic Inc.

WM8580AGEFT/V - 24-Bit Stereo Audio Codec | Cirrus Logic

MPN: WM8580AGEFT/V ✓ সক্রিয়
25 mA Vdss 48-TQFP Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

WM8580AGEFT/V সারাংশ

The Cirrus Logic WM8580AGEFT/V is a multichannel stereo audio codec with an integrated S/PDIF transceiver, a 24-bit serial interface, and operation to 192 kSPS. It is packaged in a 48-pin TQFP measuring 7 x 7 mm. The device supports stereo audio conversion, one A/D converter, and digital audio connections for consumer and industrial audio systems.

An audio codec is a mixed-signal semiconductor that converts between analog audio signals and digital data. The WM8580AGEFT/V belongs to the audio codec hierarchy, where codec functionality includes signal conversion, filtering, sampling, and digital interface control. Its S/PDIF capability supports digital consumer-audio formats, while the serial interface provides a digital path between the codec and a host processor or audio engine.

Principal features include a 24-bit serial data format, support for sampling rates up to 192 kSPS, and an operating temperature range from -40°C to +85°C. The integrated S/PDIF transceiver supports systems that require digital audio transmission, and the listed operating supply current is 25 mA. The 48-TQFP arrangement provides all required signal, power, control, and ground connections in a compact surface-mount footprint.

The WM8580AGEFT/V combines analog-to-digital conversion with digital audio interface functions in one device. According to the manufacturer datasheet, the codec includes one A/D converter and is designed for multichannel audio conversion. The 192 kSPS capability allows it to support high-resolution audio streams, while the 24-bit interface provides sufficient resolution for modern digital audio processing. Exact converter signal-to-noise ratio, distortion, clocking, and digital timing limits must be taken from the manufacturer datasheet before finalizing an audio design.

Typical uses include digital audio equipment, multimedia systems, active speaker products, consumer electronics, and embedded audio platforms. In each case, the codec can convert an analog audio input to digital data or route digital audio through its serial and S/PDIF interfaces. Hosts using the codec must supply the required clocking, configure the operating mode, and implement the appropriate software or firmware controls.

PCB implementation should prioritize short, quiet analog and digital return paths and place decoupling capacitors close to the device power pins. Because this mixed-signal component combines 24-bit audio conversion with digital interfaces, routing should minimize coupling between sensitive analog nodes and high-speed digital lines. Ground and power-plane geometry should follow the pinout and layout guidance in the manufacturer datasheet.

This product page summarizes the codec's confirmed resolution, sampling rate, channel configuration, package, temperature range, and digital-interface characteristics. It also organizes replacement considerations, application guidance, comparison parameters, and practical PCB recommendations for engineers evaluating the WM8580AGEFT/V.

এর জন্য ড্রপ-ইন বিকল্প WM8580AGEFT/V — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই পণ্যের জন্য কোনো ড্রপ-ইন বিকল্প পাওয়া যায়নি।

বিকল্প অনুরোধ করুন

WM8580AGEFT/V সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type Multichannel audio codec with S/PDIF transceiver
Audio Channel Configuration Stereo
Digital Interface Resolution 24 bit
Maximum Sampling Rate 192 kSPS
A/D Converter Count 1 converter
Integrated S/PDIF Transceiver Yes
Operating Supply Current 25 mA
Minimum Operating Temperature -40°C
Maximum Operating Temperature +85°C
Package Type 48-TQFP
Package Dimensions 7 x 7 mm
মাউন্টিং টাইপ Surface mount
পিনের সংখ্যা 48 pins
Digital Audio Interface 24-bit serial interface
Codec Category Multichannel CODEC
Signal Processing Method Sigma-delta ADC

WM8580AGEFT/V 7 x 7 mm পিন কনফিগারেশন গাইড

WM8580AGEFT/V (7 x 7 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

WM8580AGEFT/V-এর জন্য 7 x 7 mm প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি WM8580AGEFT/V.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

WM8580AGEFT/V এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Digital Audio Equipment, Multimedia Speaker Systems, Consumer Electronics, Recording and Monitoring Equipment, Industrial Audio Control, Digital Audio Development Platforms.

🎧

Digital Audio Equipment

The WM8580AGEFT/V fits digital audio equipment that needs stereo conversion, a 24-bit serial path, and S/PDIF connectivity in one device. Its sampling capability reaches 192 kSPS, allowing the codec to support high-resolution playback, recording, monitoring, and format-conversion subsystems without a separate S/PDIF transceiver. The host processor must provide the required clocks, configure the codec interface, and synchronize all digital audio paths. Because the component combines mixed-signal conversion with a serial interface, board design should separate sensitive analog routing from clock and data lines while following the manufacturer layout guidance.

🔊

Multimedia Speaker Systems

The WM8580AGEFT/V is appropriate for multimedia speakers and digital-input active speaker systems where an S/PDIF source must be converted and processed locally. The integrated S/PDIF transceiver removes the need for a separate digital-interface device, while the 24-bit serial interface supports communication with a soundbar controller or digital audio processor. The listed 25 mA operating supply current provides a defined starting point for power budgeting. At 192 kSPS, the complete signal chain must maintain sufficient bandwidth and clock quality to preserve high-resolution audio without introducing jitter or analog noise.

📺

Consumer Electronics

The WM8580AGEFT/V can serve as the audio interface in consumer electronics that accept analog microphones or line-level sources while also supporting digital audio routing. Its one A/D converter and 24-bit serial format provide a compact path for converting an analog input into a digital stream, and the integrated S/PDIF transceiver supports digital output where required. The 48-TQFP package supports compact surface-mount construction. Firmware must initialize the codec, select the required clock and data format, and handle gain and routing functions according to the manufacturer register documentation.

🎙️

Recording and Monitoring Equipment

The WM8580AGEFT/V is suitable for recording and monitoring products that need a defined 24-bit conversion path and S/PDIF interoperability. A studio monitor controller, USB audio interface, or broadcast-monitor product can route digital sources through the codec while using its converter for an analog capture path. The maximum 192 kSPS rate supports high-resolution workflows, although the host interface, storage medium, and clock architecture must also support that rate. Low-noise analog layout, stable references, and correctly configured filters are essential for maintaining recording quality.

🏭

Industrial Audio Control

The WM8580AGEFT/V can support industrial audio-control systems that combine local monitoring with a digital audio backbone. Its -40°C to +85°C operating range permits use across industrial temperature environments, while the S/PDIF transceiver provides a standardized digital-audio connection to equipment such as sound controllers or networked amplifiers. The stereo 24-bit architecture supports deterministic digital transfer between subsystems. Designers should still verify clock tolerance, analog signal levels, and power sequencing against the manufacturer datasheet, particularly when the codec is paired with long S/PDIF cables or high-gain analog front ends.

🔧

Digital Audio Development Platforms

The WM8580AGEFT/V is useful in digital audio development platforms that require evaluation of S/PDIF behavior, 24-bit conversion, and support for sampling rates up to 192 kSPS. A development board can expose the codec to a host processor, provide controllable clocks, and route its analog inputs and digital outputs for measurement. Because configuration and clock relationships determine performance, engineers should use the manufacturer's recommended application circuit as the reference. The 7 x 7 mm 48-TQFP package also makes the codec practical for compact evaluation hardware with controlled analog and digital layout.

What is the WM8580AGEFT/V?
The WM8580AGEFT/V is a Cirrus Logic multichannel audio codec with an integrated S/PDIF transceiver. It provides a 24-bit serial interface, supports sampling rates up to 192 kSPS, and is packaged in a 48-TQFP measuring 7 x 7 mm. According to the manufacturer datasheet, the device is intended for stereo audio conversion and digital audio interface applications.
What are the key specifications of WM8580AGEFT/V?
The key WM8580AGEFT/V specifications are a 24-bit serial interface, operation up to 192 kSPS, one A/D converter, an integrated S/PDIF transceiver, and a -40°C to +85°C operating-temperature range. The manufacturer also specifies a 25 mA operating supply current and a 48-TQFP package measuring 7 x 7 mm. Converter accuracy and interface timing values must be checked in the manufacturer datasheet.
What is the audio codec category of WM8580AGEFT/V?
The WM8580AGEFT/V is an audio codec, or CODEC, with integrated analog-to-digital conversion, digital signal processing, and serial audio interfacing. The manufacturer describes it as a multichannel CODEC with an S/PDIF transceiver. In the broader semiconductor hierarchy, it is a mixed-signal interface IC that connects analog audio sources to a digital audio host.
Where can I download the WM8580AGEFT/V datasheet PDF?
The WM8580AGEFT/V datasheet PDF is available through the Wolfson Microelectronics datasheet listing linked on this page. The document contains the authoritative pin descriptions, electrical characteristics, interface timing, clock requirements, and application circuit details. Use the manufacturer datasheet for design implementation rather than relying on distributor summaries or third-party pinout images.
Where is the WM8580AGEFT/V pinout located?
The WM8580AGEFT/V pinout is located in the pin-description and package-drawing sections of the manufacturer datasheet. The component uses a 48-pin TQFP package measuring 7 x 7 mm. Use that drawing when assigning PCB nets and confirming exposed-pad, ground, supply, analog, digital, and clock connections.
What is the maximum sampling rate of WM8580AGEFT/V?
The WM8580AGEFT/V supports a maximum sampling rate of 192 kSPS. This permits high-resolution digital audio streams when the host processor, clock source, and storage or transmission path support the same rate. The manufacturer datasheet should be used to determine valid clock ratios, supported data-word configurations, and filtering behavior.
Does WM8580AGEFT/V include an S/PDIF transceiver?
Yes, the WM8580AGEFT/V includes an S/PDIF transceiver. This allows the codec to participate in digital consumer-audio links without requiring a separate S/PDIF transmitter or receiver for every supported path. Signal-integrity, output-level, and format requirements should still be checked against the datasheet and the external network connected to the relevant pins.
Is WM8580AGEFT/V suitable for stereo audio systems?
The WM8580AGEFT/V is suitable for stereo audio systems because the manufacturer identifies it as a stereo, 24-bit serial audio codec with a multichannel configuration and integrated S/PDIF support. Its 192 kSPS capability also supports high-resolution audio. The design must provide suitable analog sources, stable clocks, decoupled supplies, and the required digital audio interface configuration.
What can replace the WM8580AGEFT/V?
A replacement for the WM8580AGEFT/V must use the same 48-TQFP footprint, preserve pin-to-pin signal assignments, and meet the required 24-bit conversion, 192 kSPS, clock, and S/PDIF functions. No technically validated drop-in replacement is established by the available manufacturer and distributor information. Treat the WM8580AGEFT/RV catalog entry as a packaging code variant rather than an independent replacement.
What is the best drop-in replacement for WM8580AGEFT/V?
No independently validated drop-in replacement is established for the WM8580AGEFT/V. The closest same-device catalog entry is WM8580AGEFT/RV, which shares the WM8580AGEFT base designation and 48-TQFP package but represents a different packing code rather than a distinct engineering solution. Verify the manufacturer's pinout, clock requirements, register map, and digital interface before treating any substitute as drop-in.
Where can I buy WM8580AGEFT/V online?
The WM8580AGEFT/V can be requested through the Request a Quote form on this page. The form is the appropriate channel for current unit availability, order quantity, and lead-time confirmation. Provide the exact WM8580AGEFT/V part number and the required shipping destination so the request is matched to the correct package and packing code.
What is the price of WM8580AGEFT/V?
Current pricing for the exact WM8580AGEFT/V part is obtained through the Request a Quote form on this page. The form allows quantity, delivery, and logistics requirements to be included in the request. Quote-based confirmation avoids presenting a stale unit value or mixing the WM8580AGEFT/V ordering code with another packing variant.
Is WM8580AGEFT/V in stock and what is its lead time?
Current stock status and lead time for WM8580AGEFT/V should be confirmed through the Request a Quote form on this page. Submit the exact MPN, required quantity, and destination to obtain a production-ready response. Because availability can vary with package, packing code, and order volume, stock should not be inferred solely from a catalog listing.
WM8580AGEFT/V vs WM8580AGEFT/RV - are they interchangeable?
The WM8580AGEFT/V and WM8580AGEFT/RV share the WM8580AGEFT base part number and 48-TQFP package, but the final characters identify different ordering or packing codes. They should not be treated as interchangeable solely from the catalog descriptions. Confirm reel orientation, packing form, quantity, and the manufacturer's ordering information before substituting one order code for the other.
How should the WM8580AGEFT/V be used in a digital audio design?
The WM8580AGEFT/V should be configured as the mixed-signal conversion and digital-interface device between analog audio circuitry and the host audio engine. Supply the required clocks and decoupled rails, route analog and digital signals according to the datasheet, and configure the codec through its control interface. Its 24-bit format and 192 kSPS capability support high-resolution streams when the rest of the signal chain has equivalent bandwidth.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা WM8580AGEFT/V — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the WM8580AGEFT/V when a design requires a stereo, 24-bit audio codec with an integrated S/PDIF transceiver and support for sampling rates up to 192 kSPS. Its 48-TQFP package consolidates mixed-signal conversion and digital-audio interfacing, making it suitable for media players, active speakers, monitoring equipment, and industrial audio controllers. The -40°C to +85°C range also supports broader environmental requirements than a consumer-only codec. Before approving the device, verify the exact clock architecture, converter performance, register set, analog levels, and pin assignments in the manufacturer datasheet. No distinct drop-in replacement has been established; WM8580AGEFT/RV is a related ordering code for the same WM8580AGEFT family and should be evaluated as a packing variant rather than a functionally different alternative. For designs that require different resolution, channel count, package size, or S/PDIF capability, consider a redesigned codec selection rather than assuming cross-family compatibility.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য
Brand Cirrus Logic
Package 48-TQFP (7 x 7 mm)
Product Type Multichannel audio codec with S/PDIF transceiver
Audio Configuration Stereo
Digital Interface Resolution 24 bit
Maximum Sampling Rate 192 kSPS
A/D Converter Count 1 converter
Integrated S/PDIF Transceiver Yes
Operating Supply Current 25 mA
Operating Temperature -40°C to +85°C

মূল পার্থক্যসমূহ

  • Integrated digital-audio connectivity in one codec (বনামSeparate analog codec and S/PDIF transceiver implementation)
  • Supports high-resolution audio streams (বনামLower-rate audio codec designs)
  • Industrial temperature capability (বনামConsumer-temperature audio codec options)

ডিজাইন নোট

Place input and output decoupling capacitors adjacent to their corresponding power pins and follow the manufacturer datasheet for capacitor values and permitted ceramic types. Keep the analog ground and digital return strategy consistent with the recommended application circuit. A compact 7 x 7 mm TQFP package can still support sensitive audio performance when supply vias, return paths, and analog components are positioned to minimize loop area.

Route the 24-bit serial data, clock, and control signals away from analog input nodes and high-impedance bias points. Maintain a continuous reference plane beneath the digital bus and use the shortest practical clock path to the host or audio engine. S/PDIF signals require correct source and load termination; verify connector, cable, and termination requirements using the manufacturer interface guidance rather than assuming a generic network.

Do not configure the codec for 192 kSPS unless the master clock, serial interface, host processor, and downstream equipment all support the resulting clock and data rate. Mismatched clock ratios or unsupported word lengths can produce incorrect timing, distortion, or intermittent audio. After power-up, follow the manufacturer initialization sequence and verify register settings, mute release, and routing before evaluating performance.

The listed 25 mA operating supply current is the starting point for supply planning, but analog and digital branch currents should be separated according to the manufacturer recommendations. Check startup, shutdown, and mode-dependent current in the datasheet before sizing regulators. If the device powers noisy digital circuitry, prevent that noise from entering the codec through shared supply paths or inadequate decoupling.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

Compliance declarations require confirmation from the manufacturer or authoritative regulatory documentation.

ডেটা যাচাই করা হয়েছে: 2026-11-16 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

WM8580AGEFT/V datasheet WM8580AGEFT/V pinout WM8580AGEFT/V datasheet pdf WM8580AGEFT/V equivalent WM8580AGEFT/V replacement WM8580AGEFT/V cross reference WM8580AGEFT/V 48-TQFP footprint WM8580AGEFT/V application circuit Cirrus Logic WM8580AGEFT/V WM8580AGEFT/V price WM8580AGEFT/V stock WM8580AGEFT/V 24-bit 192 kSPS WM8580AGEFT/V S/PDIF codec WM8580AGEFT/V vs WM8580AGEFT/RV WM8580AGEFT/V audio interface IC

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Cirrus Logic WM8580AGEFT/V WM8580AGEFT WM8580AGEFT/RV Wolfson Microelectronics audio codec CODEC multichannel audio codec mixed-signal semiconductor sigma-delta ADC 24-bit serial interface S/PDIF transceiver digital audio interface stereo audio 48-TQFP TQFP package family surface-mount package SMD 192 kSPS audio signal conversion digital audio equipment active speaker recording equipment RoHS REACH
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন