WM8580AGEFT/V - 24-Bit Stereo Audio Codec | Cirrus Logic
料号: WM8580AGEFT/V ✓ 量产中WM8580AGEFT/V 概述
An audio codec is a mixed-signal semiconductor that converts between analog audio signals and digital data. The WM8580AGEFT/V belongs to the audio codec hierarchy, where codec functionality includes signal conversion, filtering, sampling, and digital interface control. Its S/PDIF capability supports digital consumer-audio formats, while the serial interface provides a digital path between the codec and a host processor or audio engine.
Principal features include a 24-bit serial data format, support for sampling rates up to 192 kSPS, and an operating temperature range from -40°C to +85°C. The integrated S/PDIF transceiver supports systems that require digital audio transmission, and the listed operating supply current is 25 mA. The 48-TQFP arrangement provides all required signal, power, control, and ground connections in a compact surface-mount footprint.
The WM8580AGEFT/V combines analog-to-digital conversion with digital audio interface functions in one device. According to the manufacturer datasheet, the codec includes one A/D converter and is designed for multichannel audio conversion. The 192 kSPS capability allows it to support high-resolution audio streams, while the 24-bit interface provides sufficient resolution for modern digital audio processing. Exact converter signal-to-noise ratio, distortion, clocking, and digital timing limits must be taken from the manufacturer datasheet before finalizing an audio design.
Typical uses include digital audio equipment, multimedia systems, active speaker products, consumer electronics, and embedded audio platforms. In each case, the codec can convert an analog audio input to digital data or route digital audio through its serial and S/PDIF interfaces. Hosts using the codec must supply the required clocking, configure the operating mode, and implement the appropriate software or firmware controls.
PCB implementation should prioritize short, quiet analog and digital return paths and place decoupling capacitors close to the device power pins. Because this mixed-signal component combines 24-bit audio conversion with digital interfaces, routing should minimize coupling between sensitive analog nodes and high-speed digital lines. Ground and power-plane geometry should follow the pinout and layout guidance in the manufacturer datasheet.
This product page summarizes the codec's confirmed resolution, sampling rate, channel configuration, package, temperature range, and digital-interface characteristics. It also organizes replacement considerations, application guidance, comparison parameters, and practical PCB recommendations for engineers evaluating the WM8580AGEFT/V.
直接替换替代料: WM8580AGEFT/V ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料WM8580AGEFT/V 最大额定值与电气特性
| Product Type | Multichannel audio codec with S/PDIF transceiver |
| Audio Channel Configuration | Stereo |
| Digital Interface Resolution | 24 bit |
| Maximum Sampling Rate | 192 kSPS |
| A/D Converter Count | 1 converter |
| Integrated S/PDIF Transceiver | Yes |
| Operating Supply Current | 25 mA |
| Minimum Operating Temperature | -40°C |
| Maximum Operating Temperature | +85°C |
| Package Type | 48-TQFP |
| Package Dimensions | 7 x 7 mm |
| 安装类型 | Surface mount |
| 引脚数 | 48 pins |
| Digital Audio Interface | 24-bit serial interface |
| Codec Category | Multichannel CODEC |
| Signal Processing Method | Sigma-delta ADC |
WM8580AGEFT/V 7 x 7 mm 引脚配置指南
WM8580AGEFT/V(7 x 7 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: WM8580AGEFT/V.
请参阅 数据手册 以查看完整引脚配置。
典型应用
WM8580AGEFT/V 适用于 6 应用s: Digital Audio Equipment, Multimedia Speaker Systems, Consumer Electronics, Recording and Monitoring Equipment, Industrial Audio Control, Digital Audio Development Platforms.
Digital Audio Equipment
The WM8580AGEFT/V fits digital audio equipment that needs stereo conversion, a 24-bit serial path, and S/PDIF connectivity in one device. Its sampling capability reaches 192 kSPS, allowing the codec to support high-resolution playback, recording, monitoring, and format-conversion subsystems without a separate S/PDIF transceiver. The host processor must provide the required clocks, configure the codec interface, and synchronize all digital audio paths. Because the component combines mixed-signal conversion with a serial interface, board design should separate sensitive analog routing from clock and data lines while following the manufacturer layout guidance.
推荐
Multimedia Speaker Systems
The WM8580AGEFT/V is appropriate for multimedia speakers and digital-input active speaker systems where an S/PDIF source must be converted and processed locally. The integrated S/PDIF transceiver removes the need for a separate digital-interface device, while the 24-bit serial interface supports communication with a soundbar controller or digital audio processor. The listed 25 mA operating supply current provides a defined starting point for power budgeting. At 192 kSPS, the complete signal chain must maintain sufficient bandwidth and clock quality to preserve high-resolution audio without introducing jitter or analog noise.
推荐
Consumer Electronics
The WM8580AGEFT/V can serve as the audio interface in consumer electronics that accept analog microphones or line-level sources while also supporting digital audio routing. Its one A/D converter and 24-bit serial format provide a compact path for converting an analog input into a digital stream, and the integrated S/PDIF transceiver supports digital output where required. The 48-TQFP package supports compact surface-mount construction. Firmware must initialize the codec, select the required clock and data format, and handle gain and routing functions according to the manufacturer register documentation.
推荐
Recording and Monitoring Equipment
The WM8580AGEFT/V is suitable for recording and monitoring products that need a defined 24-bit conversion path and S/PDIF interoperability. A studio monitor controller, USB audio interface, or broadcast-monitor product can route digital sources through the codec while using its converter for an analog capture path. The maximum 192 kSPS rate supports high-resolution workflows, although the host interface, storage medium, and clock architecture must also support that rate. Low-noise analog layout, stable references, and correctly configured filters are essential for maintaining recording quality.
推荐
Industrial Audio Control
The WM8580AGEFT/V can support industrial audio-control systems that combine local monitoring with a digital audio backbone. Its -40°C to +85°C operating range permits use across industrial temperature environments, while the S/PDIF transceiver provides a standardized digital-audio connection to equipment such as sound controllers or networked amplifiers. The stereo 24-bit architecture supports deterministic digital transfer between subsystems. Designers should still verify clock tolerance, analog signal levels, and power sequencing against the manufacturer datasheet, particularly when the codec is paired with long S/PDIF cables or high-gain analog front ends.
推荐
Digital Audio Development Platforms
The WM8580AGEFT/V is useful in digital audio development platforms that require evaluation of S/PDIF behavior, 24-bit conversion, and support for sampling rates up to 192 kSPS. A development board can expose the codec to a host processor, provide controllable clocks, and route its analog inputs and digital outputs for measurement. Because configuration and clock relationships determine performance, engineers should use the manufacturer's recommended application circuit as the reference. The 7 x 7 mm 48-TQFP package also makes the codec practical for compact evaluation hardware with controlled analog and digital layout.
推荐
推荐产品汇总
工程参考数据: WM8580AGEFT/V ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Brand | Cirrus Logic |
| Package | 48-TQFP (7 x 7 mm) |
| Product Type | Multichannel audio codec with S/PDIF transceiver |
| Audio Configuration | Stereo |
| Digital Interface Resolution | 24 bit |
| Maximum Sampling Rate | 192 kSPS |
| A/D Converter Count | 1 converter |
| Integrated S/PDIF Transceiver | Yes |
| Operating Supply Current | 25 mA |
| Operating Temperature | -40°C to +85°C |
关键差异点
- Integrated digital-audio connectivity in one codec (对比 Separate analog codec and S/PDIF transceiver implementation)
- Supports high-resolution audio streams (对比 Lower-rate audio codec designs)
- Industrial temperature capability (对比 Consumer-temperature audio codec options)
设计说明
Place input and output decoupling capacitors adjacent to their corresponding power pins and follow the manufacturer datasheet for capacitor values and permitted ceramic types. Keep the analog ground and digital return strategy consistent with the recommended application circuit. A compact 7 x 7 mm TQFP package can still support sensitive audio performance when supply vias, return paths, and analog components are positioned to minimize loop area.
Route the 24-bit serial data, clock, and control signals away from analog input nodes and high-impedance bias points. Maintain a continuous reference plane beneath the digital bus and use the shortest practical clock path to the host or audio engine. S/PDIF signals require correct source and load termination; verify connector, cable, and termination requirements using the manufacturer interface guidance rather than assuming a generic network.
Do not configure the codec for 192 kSPS unless the master clock, serial interface, host processor, and downstream equipment all support the resulting clock and data rate. Mismatched clock ratios or unsupported word lengths can produce incorrect timing, distortion, or intermittent audio. After power-up, follow the manufacturer initialization sequence and verify register settings, mute release, and routing before evaluating performance.
The listed 25 mA operating supply current is the starting point for supply planning, but analog and digital branch currents should be separated according to the manufacturer recommendations. Check startup, shutdown, and mode-dependent current in the datasheet before sizing regulators. If the device powers noisy digital circuitry, prevent that noise from entering the codec through shared supply paths or inadequate decoupling.
合规信息
Compliance declarations require confirmation from the manufacturer or authoritative regulatory documentation.