WM8580AGEFT/V - 24-Bit Stereo Audio Codec | Cirrus Logic
MPN: WM8580AGEFT/V ✓ פעילWM8580AGEFT/V סקירה
An audio codec is a mixed-signal semiconductor that converts between analog audio signals and digital data. The WM8580AGEFT/V belongs to the audio codec hierarchy, where codec functionality includes signal conversion, filtering, sampling, and digital interface control. Its S/PDIF capability supports digital consumer-audio formats, while the serial interface provides a digital path between the codec and a host processor or audio engine.
Principal features include a 24-bit serial data format, support for sampling rates up to 192 kSPS, and an operating temperature range from -40°C to +85°C. The integrated S/PDIF transceiver supports systems that require digital audio transmission, and the listed operating supply current is 25 mA. The 48-TQFP arrangement provides all required signal, power, control, and ground connections in a compact surface-mount footprint.
The WM8580AGEFT/V combines analog-to-digital conversion with digital audio interface functions in one device. According to the manufacturer datasheet, the codec includes one A/D converter and is designed for multichannel audio conversion. The 192 kSPS capability allows it to support high-resolution audio streams, while the 24-bit interface provides sufficient resolution for modern digital audio processing. Exact converter signal-to-noise ratio, distortion, clocking, and digital timing limits must be taken from the manufacturer datasheet before finalizing an audio design.
Typical uses include digital audio equipment, multimedia systems, active speaker products, consumer electronics, and embedded audio platforms. In each case, the codec can convert an analog audio input to digital data or route digital audio through its serial and S/PDIF interfaces. Hosts using the codec must supply the required clocking, configure the operating mode, and implement the appropriate software or firmware controls.
PCB implementation should prioritize short, quiet analog and digital return paths and place decoupling capacitors close to the device power pins. Because this mixed-signal component combines 24-bit audio conversion with digital interfaces, routing should minimize coupling between sensitive analog nodes and high-speed digital lines. Ground and power-plane geometry should follow the pinout and layout guidance in the manufacturer datasheet.
This product page summarizes the codec's confirmed resolution, sampling rate, channel configuration, package, temperature range, and digital-interface characteristics. It also organizes replacement considerations, application guidance, comparison parameters, and practical PCB recommendations for engineers evaluating the WM8580AGEFT/V.
חלופות תחליף ישיר עבור WM8580AGEFT/V — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
אין חלופות תואמות Drop-in עבור מוצר זה.
בקשת חלופותWM8580AGEFT/V דירוגים מרביים ומאפיינים חשמליים
| Product Type | Multichannel audio codec with S/PDIF transceiver |
| Audio Channel Configuration | Stereo |
| Digital Interface Resolution | 24 bit |
| Maximum Sampling Rate | 192 kSPS |
| A/D Converter Count | 1 converter |
| Integrated S/PDIF Transceiver | Yes |
| Operating Supply Current | 25 mA |
| Minimum Operating Temperature | -40°C |
| Maximum Operating Temperature | +85°C |
| Package Type | 48-TQFP |
| Package Dimensions | 7 x 7 mm |
| סוג הרכבה | Surface mount |
| מספר פינים | 48 pins |
| Digital Audio Interface | 24-bit serial interface |
| Codec Category | Multichannel CODEC |
| Signal Processing Method | Sigma-delta ADC |
מדריך תצורת פינים של WM8580AGEFT/V 7 x 7 mm
תצורת פינים עבור WM8580AGEFT/V (מארזת 7 x 7 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור WM8580AGEFT/V.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
WM8580AGEFT/V מתאים עבור 6 יישוםs: Digital Audio Equipment, Multimedia Speaker Systems, Consumer Electronics, Recording and Monitoring Equipment, Industrial Audio Control, Digital Audio Development Platforms.
Digital Audio Equipment
The WM8580AGEFT/V fits digital audio equipment that needs stereo conversion, a 24-bit serial path, and S/PDIF connectivity in one device. Its sampling capability reaches 192 kSPS, allowing the codec to support high-resolution playback, recording, monitoring, and format-conversion subsystems without a separate S/PDIF transceiver. The host processor must provide the required clocks, configure the codec interface, and synchronize all digital audio paths. Because the component combines mixed-signal conversion with a serial interface, board design should separate sensitive analog routing from clock and data lines while following the manufacturer layout guidance.
מומלץ
Multimedia Speaker Systems
The WM8580AGEFT/V is appropriate for multimedia speakers and digital-input active speaker systems where an S/PDIF source must be converted and processed locally. The integrated S/PDIF transceiver removes the need for a separate digital-interface device, while the 24-bit serial interface supports communication with a soundbar controller or digital audio processor. The listed 25 mA operating supply current provides a defined starting point for power budgeting. At 192 kSPS, the complete signal chain must maintain sufficient bandwidth and clock quality to preserve high-resolution audio without introducing jitter or analog noise.
מומלץ
Consumer Electronics
The WM8580AGEFT/V can serve as the audio interface in consumer electronics that accept analog microphones or line-level sources while also supporting digital audio routing. Its one A/D converter and 24-bit serial format provide a compact path for converting an analog input into a digital stream, and the integrated S/PDIF transceiver supports digital output where required. The 48-TQFP package supports compact surface-mount construction. Firmware must initialize the codec, select the required clock and data format, and handle gain and routing functions according to the manufacturer register documentation.
מומלץ
Recording and Monitoring Equipment
The WM8580AGEFT/V is suitable for recording and monitoring products that need a defined 24-bit conversion path and S/PDIF interoperability. A studio monitor controller, USB audio interface, or broadcast-monitor product can route digital sources through the codec while using its converter for an analog capture path. The maximum 192 kSPS rate supports high-resolution workflows, although the host interface, storage medium, and clock architecture must also support that rate. Low-noise analog layout, stable references, and correctly configured filters are essential for maintaining recording quality.
מומלץ
Industrial Audio Control
The WM8580AGEFT/V can support industrial audio-control systems that combine local monitoring with a digital audio backbone. Its -40°C to +85°C operating range permits use across industrial temperature environments, while the S/PDIF transceiver provides a standardized digital-audio connection to equipment such as sound controllers or networked amplifiers. The stereo 24-bit architecture supports deterministic digital transfer between subsystems. Designers should still verify clock tolerance, analog signal levels, and power sequencing against the manufacturer datasheet, particularly when the codec is paired with long S/PDIF cables or high-gain analog front ends.
מומלץ
Digital Audio Development Platforms
The WM8580AGEFT/V is useful in digital audio development platforms that require evaluation of S/PDIF behavior, 24-bit conversion, and support for sampling rates up to 192 kSPS. A development board can expose the codec to a host processor, provide controllable clocks, and route its analog inputs and digital outputs for measurement. Because configuration and clock relationships determine performance, engineers should use the manufacturer's recommended application circuit as the reference. The 7 x 7 mm 48-TQFP package also makes the codec practical for compact evaluation hardware with controlled analog and digital layout.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור WM8580AGEFT/V — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה |
|---|---|
| Brand | Cirrus Logic |
| Package | 48-TQFP (7 x 7 mm) |
| Product Type | Multichannel audio codec with S/PDIF transceiver |
| Audio Configuration | Stereo |
| Digital Interface Resolution | 24 bit |
| Maximum Sampling Rate | 192 kSPS |
| A/D Converter Count | 1 converter |
| Integrated S/PDIF Transceiver | Yes |
| Operating Supply Current | 25 mA |
| Operating Temperature | -40°C to +85°C |
מבדילים עיקריים
- Integrated digital-audio connectivity in one codec (לעומתSeparate analog codec and S/PDIF transceiver implementation)
- Supports high-resolution audio streams (לעומתLower-rate audio codec designs)
- Industrial temperature capability (לעומתConsumer-temperature audio codec options)
הערות תכנון
Place input and output decoupling capacitors adjacent to their corresponding power pins and follow the manufacturer datasheet for capacitor values and permitted ceramic types. Keep the analog ground and digital return strategy consistent with the recommended application circuit. A compact 7 x 7 mm TQFP package can still support sensitive audio performance when supply vias, return paths, and analog components are positioned to minimize loop area.
Route the 24-bit serial data, clock, and control signals away from analog input nodes and high-impedance bias points. Maintain a continuous reference plane beneath the digital bus and use the shortest practical clock path to the host or audio engine. S/PDIF signals require correct source and load termination; verify connector, cable, and termination requirements using the manufacturer interface guidance rather than assuming a generic network.
Do not configure the codec for 192 kSPS unless the master clock, serial interface, host processor, and downstream equipment all support the resulting clock and data rate. Mismatched clock ratios or unsupported word lengths can produce incorrect timing, distortion, or intermittent audio. After power-up, follow the manufacturer initialization sequence and verify register settings, mute release, and routing before evaluating performance.
The listed 25 mA operating supply current is the starting point for supply planning, but analog and digital branch currents should be separated according to the manufacturer recommendations. Check startup, shutdown, and mode-dependent current in the datasheet before sizing regulators. If the device powers noisy digital circuitry, prevent that noise from entering the codec through shared supply paths or inadequate decoupling.
מידע על תאימות
Compliance declarations require confirmation from the manufacturer or authoritative regulatory documentation.