XC3S200A-4FTG256C - 4032-Cell Spartan-3A FPGA | AMD
MPN: XC3S200A-4FTG256C ✓ সক্রিয়XC3S200A-4FTG256C সারাংশ
An FPGA is a reconfigurable digital integrated circuit whose logic, memory, and signal-processing resources can be programmed after manufacture. Unlike a fixed-function application-specific integrated circuit, the Spartan-3A architecture allows designers to implement parallel processing, control logic, interfaces, and hardware acceleration in one device. The XC3S200A-4FTG256C combines that flexibility with a relatively compact 17 mm × 17 mm ball-grid-array footprint.
The 4032-cell configuration provides substantial logic capacity for embedded control, communications, instrumentation, and industrial interface designs. Its 195 user I/Os support connections to external memory, converters, transceivers, and digital peripherals. The stated 667 MHz maximum frequency provides a concrete timing target, although actual interface performance remains dependent on the selected clock, I/O standard, routing, logic depth, and timing constraints.
The -4 speed designation identifies the device’s specified performance grade, while FTG256 denotes the 256-ball package used by this ordering variant. The C suffix identifies the commercial temperature grade, with an operating range of 0°C to +85°C. Like other FPGAs, the device is configured through a serial or parallel programming path and then operates as a configurable digital circuit rather than a conventional fixed analog or mixed-signal component.
Typical uses include industrial control systems, data-acquisition front ends, communications adapters, embedded signal processors, and compact control platforms. The 195 I/O count is especially useful when a design must retain legacy parallel interfaces while also implementing programmable logic and sequencing. The Spartan-3A family was designed for cost-sensitive, high-volume applications where field programmability reduces the need for separate fixed-function devices.
PCB design should follow the AMD Spartan-3A family data sheet DS529 for the FTBGA-256 land pattern, power rails, decoupling, configuration pins, and I/O standards. Preserve the required configuration interface, connect unused pins according to the device guidance, and verify every high-speed interface against the selected I/O standard. Because the commercial-grade device is intended for 0°C to +85°C operation, it should not be selected for a wider industrial or automotive temperature environment without a suitable grade.
This product summary consolidates the device’s principal capacity, package, speed, and application characteristics into an engineering-oriented reference. It also distinguishes same-footprint Spartan-3A options by logic density and temperature grade, helping designers identify candidate replacements while still requiring bitstream, timing, pinout, and lifecycle verification before substitution.
এর জন্য ড্রপ-ইন বিকল্প XC3S200A-4FTG256C — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible XC3S200A-4FTG256C (একই form factor এবং footprint) — পার্থক্য রয়েছে System Gates, Logic Cells, Package, Mounting Type, Operating Temperature.
XC3S200A-4FTG256I
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XC3S200AN-4FTG256C
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
XC3S400A-4FTG256I
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
XC3S700A-4FTG256I
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
XC3S250E-4FTG256C
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
XC3S200A-4FTG256C সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Device Type | Spartan-3A field-programmable gate array (FPGA) |
| Configurable Logic Cells | 4032 cells |
| System Gates | Approximately 200000 gates |
| User I/O Count | 195 I/Os |
| Maximum Operating Frequency | 667 MHz |
| Logic Blocks | 448 CLBs |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| প্যাকেজ | 256-pin FTBGA |
| Package Dimensions | 17 mm × 17 mm |
| অপারেটিং তাপমাত্রার পরিসর | 0°C to +85°C |
| Temperature Grade | Commercial (C) |
| Speed Grade | -4 |
| মাউন্টিং টাইপ | Surface-mount ball-grid array |
| Programming | Configurable FPGA logic |
| Lead-Free Status | Lead-free |
| RoHS স্ট্যাটাস | Compliant |
XC3S200A-4FTG256C 17 mm × 17 mm পিন কনফিগারেশন গাইড
XC3S200A-4FTG256C (17 mm × 17 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি XC3S200A-4FTG256C.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
XC3S200A-4FTG256C এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Data-Acquisition Front End, Communications Interface Adapter, Embedded Control Platform, Programmable Signal Conditioning, Video and Display Timing Controller, Test and Measurement Control.
Industrial Data-Acquisition Front End
The XC3S200A-4FTG256C suits parallel data-acquisition systems requiring programmable control logic alongside many external connections. Its 4032 configurable cells can coordinate converters, sample sequencing, digital filtering, and data transfer, while 195 user I/Os provide ample interface capacity. Place the FPGA close enough to maintain signal integrity on multi-bit buses, and use the -4 device timing reports to establish the achievable sample rate. The commercial 0°C to +85°C range makes it appropriate for temperature-controlled enclosures rather than exposed outdoor equipment.
সুপারিশকৃত
Communications Interface Adapter
The XC3S200A-4FTG256C can implement protocol conversion, framing, buffering, and test logic for communications equipment. The 4032-cell resource budget is useful for parallel-to-serial logic, clock-domain coordination, and supervisory state machines, and the 195 I/Os simplify connections to transceivers and memory. Designers should partition timing-critical paths carefully and avoid inferring interface performance solely from the 667 MHz device frequency. Validate each transceiver interface with the selected I/O standard and the board’s signal-integrity constraints.
সুপারিশকৃত
Embedded Control Platform
The XC3S200A-4FTG256C is appropriate for consolidating control logic, timers, counters, condition monitoring, and peripheral interfaces into one programmable platform. Its 195 user I/Os allow direct connection to sensors, relays, converters, and human-interface circuitry, reducing the number of fixed-function devices in a compact controller. Assign pins according to the official FTBGA-256 data sheet and keep sensitive or high-speed routes away from switching nodes. The -4 grade supports design timing analysis, although each critical path must still close at the selected system clock.
সুপারিশকৃত
Programmable Signal Conditioning
The XC3S200A-4FTG256C can implement digital filtering, gain control, calibration sequencing, and sample-path supervision in programmable instrumentation. Parallel inputs from converters can be processed concurrently, while the 4032 configurable cells provide dedicated logic for fixed-point operations and control sequencing. Keep analog and digital ground and power arrangements consistent with the board-level architecture, and route converter data according to edge-rate and return-path requirements. The device’s 1.2 V core supply also makes correct rail sequencing and local decoupling central to reliable operation.
সুপারিশকৃত
Video and Display Timing Controller
The XC3S200A-4FTG256C can generate display timing, pixel positioning, synchronization signals, and programmable overlays in cost-sensitive display equipment. Its 4032 cells are suitable for timing-control logic rather than high-definition video pixel processing, and the 195 I/Os permit parallel connection to memory or display interfaces. Route clock and pixel-enable signals with matched length and return-path discipline, then verify setup and hold margins through implementation timing reports. The commercial temperature rating suits indoor display housings with controlled ambient conditions.
সুপারিশকৃত
Test and Measurement Control
The XC3S200A-4FTG256C is useful for coordinating automated test equipment, programmable stimulus generation, result capture, and communications with a host controller. The large I/O count supports parallel DUT interfaces, while programmable logic can implement sequencers and protocol-specific state machines. Use deterministic clocking and isolate high-current switching paths from sensitive measurement circuitry. Timing closure for precision instruments must be based on the selected clock frequency and actual routing, not merely the advertised 667 MHz device maximum.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা XC3S200A-4FTG256C — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | XC3S200A-4FTG256I | XC3S200AN-4FTG256C | XC3S400A-4FTG256I | XC3S700A-4FTG256I | XC3S250E-4FTG256C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FTBGA-256 | FTBGA-256 | FTBGA-256 | FTBGA-256 | FTBGA-256 | FTBGA-256 |
| FPGA Family | Spartan-3A | Spartan-3A | Spartan-3A | Spartan-3A | Spartan-3A | Spartan-3E |
| Operating Temperature Range | 0°C to +85°C | -40°C to +100°C | 0°C to +85°C | -40°C to +100°C | -40°C to +100°C | 0°C to +85°C |
মূল পার্থক্যসমূহ
- Matches the original commercial-temperature configuration while extending temperature coverage (বনামXC3S200A-4FTG256I)
- Provides more logic capacity in the same FTG256 package family (বনামXC3S400A-4FTG256I)
- Offers a direct choice between logic scale and connector availability (বনামXC3S700A-4FTG256I)
ডিজাইন নোট
Implement the FTBGA-256 land pattern directly from AMD data sheet DS529 and its associated package drawing. Confirm ball pitches, power and ground assignments, configuration pins, and exposed thermal requirements before PCB release. Place decoupling capacitance at each supply connection as close to the device as the package geometry permits. Keep the 1.2 V core rail quiet and separate it from noisy digital or switching currents wherever the board architecture allows.
Route clocks and high-speed interfaces as controlled-impedance nets with continuous reference planes and minimal stubbing. Validate I/O standards, drive strength, and timing constraints in the FPGA implementation environment; the stated 667 MHz device frequency does not guarantee that every external interface will operate at that rate. Check setup and hold margins, clock skew, and board-level channel length after placement because package transitions and connector paths can materially affect the result.
Do not treat same-package alternatives as automatic bitstream-compatible replacements. XC3S400A-4FTG256I and XC3S700A-4FTG256I have different resource distributions, and the XC3S700A provides 161 rather than 195 user I/Os. After changing the ordering code, rerun synthesis, implementation, timing analysis, pin assignment, and configuration testing. For production use, also verify lifecycle status and obtain an authorized sourcing commitment through the Request a Quote form.
কমপ্লায়েন্স তথ্য
The component is identified as RoHS compliant and lead-free. No specific REACH, halogen-free, conflict-minerals, or automotive qualification statement is established for the exact ordering code.