AMD

XC3S200A-4FTG256C - 4032-Cell Spartan-3A FPGA | AMD

부품 번호: XC3S200A-4FTG256C ✓ 활성
1.2 V Vdss 256-pin FTBGA Package 667 MHz Speed
MOQ: 1 |

XC3S200A-4FTG256C 개요

AMD/Xilinx XC3S200A-4FTG256C is a Spartan-3A field-programmable gate array containing 4032 configurable logic cells, 195 user I/Os, and approximately 200000 system gates in a 256-pin FTBGA package. The device uses 90 nm CMOS technology, operates from a 1.2 V core supply, and is rated for a 667 MHz maximum operating frequency. These headline values place it in the low-voltage, high-density programmable-logic segment of the semiconductor hierarchy: FPGA → field-programmable gate array → programmable logic IC → integrated circuit.

An FPGA is a reconfigurable digital integrated circuit whose logic, memory, and signal-processing resources can be programmed after manufacture. Unlike a fixed-function application-specific integrated circuit, the Spartan-3A architecture allows designers to implement parallel processing, control logic, interfaces, and hardware acceleration in one device. The XC3S200A-4FTG256C combines that flexibility with a relatively compact 17 mm × 17 mm ball-grid-array footprint.

The 4032-cell configuration provides substantial logic capacity for embedded control, communications, instrumentation, and industrial interface designs. Its 195 user I/Os support connections to external memory, converters, transceivers, and digital peripherals. The stated 667 MHz maximum frequency provides a concrete timing target, although actual interface performance remains dependent on the selected clock, I/O standard, routing, logic depth, and timing constraints.

The -4 speed designation identifies the device’s specified performance grade, while FTG256 denotes the 256-ball package used by this ordering variant. The C suffix identifies the commercial temperature grade, with an operating range of 0°C to +85°C. Like other FPGAs, the device is configured through a serial or parallel programming path and then operates as a configurable digital circuit rather than a conventional fixed analog or mixed-signal component.

Typical uses include industrial control systems, data-acquisition front ends, communications adapters, embedded signal processors, and compact control platforms. The 195 I/O count is especially useful when a design must retain legacy parallel interfaces while also implementing programmable logic and sequencing. The Spartan-3A family was designed for cost-sensitive, high-volume applications where field programmability reduces the need for separate fixed-function devices.

PCB design should follow the AMD Spartan-3A family data sheet DS529 for the FTBGA-256 land pattern, power rails, decoupling, configuration pins, and I/O standards. Preserve the required configuration interface, connect unused pins according to the device guidance, and verify every high-speed interface against the selected I/O standard. Because the commercial-grade device is intended for 0°C to +85°C operation, it should not be selected for a wider industrial or automotive temperature environment without a suitable grade.

This product summary consolidates the device’s principal capacity, package, speed, and application characteristics into an engineering-oriented reference. It also distinguishes same-footprint Spartan-3A options by logic density and temperature grade, helping designers identify candidate replacements while still requiring bitstream, timing, pinout, and lifecycle verification before substitution.

드롭인 대체품: XC3S200A-4FTG256C — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: XC3S200A-4FTG256C (동일 폼 팩터 및 풋프린트) — 차이점: System Gates, Logic Cells, Package, Mounting Type, Operating Temperature.

AMD
System Gates: 200,000 gates
Logic Cells: 4,320 cells
Mounting Type: Surface Mount
비교 대상: XC3S200A-4FTG256C →
AMD
System Gates: 200000 gates
Logic Cells: 4032 cells
Package: 256-ball FTBGA
비교 대상: XC3S200A-4FTG256C →
Xilinx
System Gates: 200,000
Logic Cells: 4,032
Package: 256-ball FTBGA (FTG256), 17x17 mm, 1.0 mm pitch
비교 대상: XC3S200A-4FTG256C →
AMD
System Gates: 400,000
Logic Cells: 8,064
Package: 256-FTBGA (FTG256), 17 × 17 mm
비교 대상: XC3S200A-4FTG256C →

XC3S200A-4FTG256I

✅ 드롭인
Xilinx
📦 FTBGA-256
Spartan-3A · 200,000 · 4,032 · 448 · 1,792 · 48 Kbits · 288 Kbits · 195

가격 문의

데이터시트 보기 →

XC3S200AN-4FTG256C

✅ 드롭인
📦 FTBGA-256
Same 4032 cells, 195 I/Os, 1.2 V supply, and FTG256 package; device-family ordering details differ and require datasheet confirmation.

📋 참조 대체품 (카탈로그에 없음)

XC3S400A-4FTG256I

✅ 드롭인
📦 FTBGA-256
Same Spartan-3A FTG256 package family and -4 speed class; logic density and available I/O resources increase relative to the 200K-gate target.

📋 참조 대체품 (카탈로그에 없음)

XC3S700A-4FTG256I

✅ 드롭인
📦 FTBGA-256
Same Spartan-3A FTG256 package family and -4 speed class; logic density increases while user I/O count decreases from 195 to 161.

📋 참조 대체품 (카탈로그에 없음)

XC3S250E-4FTG256C

✅ 드롭인
📦 FTBGA-256
Uses the same FTG256 package family and -4 speed class; resource mix and logic density differ, requiring fresh synthesis and pinout verification.

📋 참조 대체품 (카탈로그에 없음)

XC3S200A-4FTG256C 최대 정격 & 전기적 특성

Device Type Spartan-3A field-programmable gate array (FPGA)
Configurable Logic Cells 4032 cells
System Gates Approximately 200000 gates
User I/O Count 195 I/Os
Maximum Operating Frequency 667 MHz
Logic Blocks 448 CLBs
Process Technology 90 nm CMOS
Core Supply Voltage 1.2 V
패키지 256-pin FTBGA
Package Dimensions 17 mm × 17 mm
동작 온도 범위 0°C to +85°C
Temperature Grade Commercial (C)
Speed Grade -4
실장 유형 Surface-mount ball-grid array
Programming Configurable FPGA logic
Lead-Free Status Lead-free
RoHS 상태 Compliant

XC3S200A-4FTG256C 17 mm × 17 mm 핀 구성 가이드

XC3S200A-4FTG256C(17 mm × 17 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

XC3S200A-4FTG256C의 17 mm × 17 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: XC3S200A-4FTG256C.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

XC3S200A-4FTG256C 적합 용도: 6 애플리케이션s: Industrial Data-Acquisition Front End, Communications Interface Adapter, Embedded Control Platform, Programmable Signal Conditioning, Video and Display Timing Controller, Test and Measurement Control.

🏭

Industrial Data-Acquisition Front End

The XC3S200A-4FTG256C suits parallel data-acquisition systems requiring programmable control logic alongside many external connections. Its 4032 configurable cells can coordinate converters, sample sequencing, digital filtering, and data transfer, while 195 user I/Os provide ample interface capacity. Place the FPGA close enough to maintain signal integrity on multi-bit buses, and use the -4 device timing reports to establish the achievable sample rate. The commercial 0°C to +85°C range makes it appropriate for temperature-controlled enclosures rather than exposed outdoor equipment.

🌐

Communications Interface Adapter

The XC3S200A-4FTG256C can implement protocol conversion, framing, buffering, and test logic for communications equipment. The 4032-cell resource budget is useful for parallel-to-serial logic, clock-domain coordination, and supervisory state machines, and the 195 I/Os simplify connections to transceivers and memory. Designers should partition timing-critical paths carefully and avoid inferring interface performance solely from the 667 MHz device frequency. Validate each transceiver interface with the selected I/O standard and the board’s signal-integrity constraints.

🔧

Embedded Control Platform

The XC3S200A-4FTG256C is appropriate for consolidating control logic, timers, counters, condition monitoring, and peripheral interfaces into one programmable platform. Its 195 user I/Os allow direct connection to sensors, relays, converters, and human-interface circuitry, reducing the number of fixed-function devices in a compact controller. Assign pins according to the official FTBGA-256 data sheet and keep sensitive or high-speed routes away from switching nodes. The -4 grade supports design timing analysis, although each critical path must still close at the selected system clock.

📺

Programmable Signal Conditioning

The XC3S200A-4FTG256C can implement digital filtering, gain control, calibration sequencing, and sample-path supervision in programmable instrumentation. Parallel inputs from converters can be processed concurrently, while the 4032 configurable cells provide dedicated logic for fixed-point operations and control sequencing. Keep analog and digital ground and power arrangements consistent with the board-level architecture, and route converter data according to edge-rate and return-path requirements. The device’s 1.2 V core supply also makes correct rail sequencing and local decoupling central to reliable operation.

📺

Video and Display Timing Controller

The XC3S200A-4FTG256C can generate display timing, pixel positioning, synchronization signals, and programmable overlays in cost-sensitive display equipment. Its 4032 cells are suitable for timing-control logic rather than high-definition video pixel processing, and the 195 I/Os permit parallel connection to memory or display interfaces. Route clock and pixel-enable signals with matched length and return-path discipline, then verify setup and hold margins through implementation timing reports. The commercial temperature rating suits indoor display housings with controlled ambient conditions.

🖥️

Test and Measurement Control

The XC3S200A-4FTG256C is useful for coordinating automated test equipment, programmable stimulus generation, result capture, and communications with a host controller. The large I/O count supports parallel DUT interfaces, while programmable logic can implement sequencers and protocol-specific state machines. Use deterministic clocking and isolate high-current switching paths from sensitive measurement circuitry. Timing closure for precision instruments must be based on the selected clock frequency and actual routing, not merely the advertised 667 MHz device maximum.

추천 제품 요약

XC3S200A-4FTG256I Xilinx 사용처: Industrial Data-Acquisition Front End, Communications Interface Adapter, Embedded Control Platform, Programmable Signal Conditioning, Video and Display Timing Controller, Test and Measurement Control XC3S200A-4VQG100C Alternative Spartan-3A density with a smaller 100-pin package 사용처: Industrial Data-Acquisition Front End XC3S250E-4FTG256C Same-package Spartan-3A family alternative for additional logic exploration 사용처: Communications Interface Adapter, Test and Measurement Control XC3S200A-4VQG100I Smaller-package Spartan-3A option when fewer I/Os are required 사용처: Embedded Control Platform XC3S200AN-4FTG256C Closely related Spartan-3A configuration in the same package family 사용처: Programmable Signal Conditioning XC3S400A-4FTG256I Higher-density same-package family option for expanded display processing 사용처: Video and Display Timing Controller
What are the key specifications of XC3S200A-4FTG256C that engineers should know?
The XC3S200A-4FTG256C provides 4032 configurable logic cells, 195 user I/Os, approximately 200000 system gates, and a stated maximum frequency of 667 MHz. It is manufactured in 90 nm CMOS, operates from a 1.2 V core supply, and uses a 256-pin FTBGA package measuring 17 mm × 17 mm. According to AMD data sheet DS529, it belongs to the Spartan-3A family and supports the -4 speed grade and commercial 0°C to +85°C temperature grade.
Where can I download the XC3S200A-4FTG256C datasheet PDF?
The official Spartan-3A family data sheet is available through AMD at https://docs.amd.com/v/u/en-US/ds529. It contains the family overview, device specifications, configuration information, and package pinouts needed to evaluate the XC3S200A-4FTG256C. AMD data sheet DS529 is the preferred reference for the 256-ball footprint, power connections, configuration pins, and I/O assignments. Use the complete family document rather than a marketplace summary when assigning PCB tracks.
Where can I find the XC3S200A-4FTG256C pinout and FTBGA-256 footprint?
The XC3S200A-4FTG256C pinout is documented in the FTBGA-256 section of AMD data sheet DS529, which covers the Spartan-3A family and its package assignments. The device uses a 17 mm × 17 mm, 256-ball FTBGA. Before laying out a PCB, map every power, ground, configuration, clock, and user I/O ball directly against the official pin table. Verify the selected package drawing and differential-pair constraints before releasing the design.
What is the XC3S200A-4FTG256C used for?
The XC3S200A-4FTG256C is used for programmable control, parallel-interface bridging, data acquisition, communications, and embedded signal-processing designs. Its 4032 configurable logic cells permit multiple digital functions to be consolidated, while 195 user I/Os provide substantial connectivity to converters, memories, and peripherals. AMD describes the Spartan-3A family as being aimed at high-volume, cost-sensitive applications where a programmable device can replace several fixed-function components.
What does the -4 speed grade mean for XC3S200A-4FTG256C?
The -4 designation identifies the XC3S200A-4FTG256C as the -4 performance grade within the Spartan-3A ordering scheme. The device has a stated maximum frequency of 667 MHz, but a design’s usable clock depends on its logic path, I/O standard, routing, and timing constraints. Use the AMD DS529 timing tables and the implementation tools’ timing reports to determine whether a particular clock and interface can close at the required margin.
Where can I buy XC3S200A-4FTG256C online?
Use the Request a Quote form on this page to request XC3S200A-4FTG256C availability, quotation, and current lead time. The request should include your target quantity, package/handling requirements, and required delivery date. Because availability can change, obtain written confirmation before committing the component to a production schedule or placing a firm purchase order.
What is the price of XC3S200A-4FTG256C?
The current XC3S200A-4FTG256C price is displayed through the Request a Quote form on this page. Submit the required quantity and purchasing information to obtain a current quotation for the exact ordering code. This avoids reliance on an outdated marketplace amount and allows the quote to reflect current inventory, quantity, packaging, and delivery requirements.
What is the lead time and stock status for XC3S200A-4FTG256C?
The XC3S200A-4FTG256C stock position and lead time should be confirmed through the Request a Quote form on this page. State the required quantity and delivery date so procurement can return an accurate availability commitment. Do not infer production readiness from a distributor search result, because inventory, allocation, and lead time can change independently of the component’s lifecycle status.
Is XC3S200A-4FTG256C in stock?
Current XC3S200A-4FTG256C availability should be requested through the Request a Quote form on this page. Include your required quantity, approved vendor list, and target delivery date in the request. A confirmed stock allocation and lead time are needed before updating a bill of materials or production schedule, especially for programmed or obsolete-design builds.
What is the best drop-in replacement for XC3S200A-4FTG256C?
The closest same-footprint candidate is XC3S200A-4FTG256I because it retains the -4 speed grade, 4032-cell density, 195 I/Os, and FTBGA-256 package while changing the temperature grade from commercial 0°C to +85°C to industrial -40°C to +100°C. It is a footprint-compatible option, not a universal substitute: verify configuration behavior, timing margins, supply requirements, and system temperature. No verified cross-brand drop-in replacement is established for this device.
Can XC3S200A-4FTG256I replace XC3S200A-4FTG256C?
The XC3S200A-4FTG256I can serve as a pin-compatible candidate for the XC3S200A-4FTG256C when the wider industrial temperature range is acceptable. Both use the Spartan-3A 4032-cell configuration, provide 195 user I/Os, retain the -4 speed designation, and use a 256-ball FTBGA package. The decisive difference is temperature grade: the target is commercial 0°C to +85°C, whereas the alternative is industrial -40°C to +100°C.
XC3S200A-4FTG256C vs XC3S400A-4FTG256I — which is better for parallel data acquisition?
Choose the XC3S400A-4FTG256I when the design needs more logic capacity than the XC3S200A-4FTG256C can provide; choose the XC3S200A-4FTG256C when its 4032 cells and 195 I/Os are sufficient and lower logic utilization is desirable. Both are Spartan-3A family devices in the same FTG256 package family, but their logic resources are not electrically identical. The larger device cannot automatically accept the original bitstream, so complete implementation, timing, and pin-level validation are mandatory.
When should I choose XC3S200A-4FTG256C over a higher-density Spartan-3A FPGA?
Choose the XC3S200A-4FTG256C when the design fits within 4032 configurable logic cells, 195 user I/Os, and the available internal resources of the 200K-gate device. It is appropriate when compactness, resource efficiency, and Spartan-3A ecosystem compatibility matter more than expansion capacity. Before finalizing the choice, synthesize the complete design rather than estimating from gate count, because multipliers, block RAM, clocks, and routing can change utilization substantially.
Is XC3S200A-4FTG256C suitable for industrial equipment?
The XC3S200A-4FTG256C is suitable for equipment operating within its commercial 0°C to +85°C rating, including many indoor industrial environments without extreme ambient temperatures. It is not the correct choice when the enclosure can exceed +85°C or fall below 0°C. For those conditions, the XC3S200A-4FTG256I provides the -40°C to +100°C industrial range while retaining the same logic density, I/O count, speed designation, and FTG256 package family.
What can replace XC3S200A-4FTG256C?
XC3S200A-4FTG256I is the clearest same-family, same-package candidate because it preserves the 4032-cell Spartan-3A configuration, 195 user I/Os, -4 speed grade, and 256-ball package while extending the temperature range. Other Spartan-3A FTG256 devices may fit the mechanical footprint but can have different logic resources, I/O assignments, or timing. Treat every replacement as a new implementation target requiring pin, timing, power, and bitstream verification.
Is XC3S200A-4FTG256C the same as XC3S200AN-4FTG256C?
The XC3S200AN-4FTG256C is a closely related Spartan-3A ordering option with the same 4032-cell density, 195 I/Os, 90 nm process, 1.2 V core supply, and FTG256 package family. It should not be treated as automatically interchangeable without checking the ordering-code differences, device features, configuration requirements, and lifecycle documentation against AMD DS529. For a production redesign, compare the exact ordering information tables and complete the normal FPGA migration checks.

엔지니어링 참조 데이터: XC3S200A-4FTG256C — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the XC3S200A-4FTG256C when a commercial-temperature Spartan-3A design fits within 4032 configurable logic cells and requires 195 user I/Os in an FTBGA-256 package. Select the XC3S200A-4FTG256I when the circuit is otherwise identical but must operate from -40°C to +100°C; it preserves the key density, I/O, speed, and package characteristics while changing temperature coverage. Consider the XC3S400A-4FTG256I when synthesis shows that the target’s 200K-gate capacity is too limited but 195 I/Os are still required. Consider the XC3S700A-4FTG256I only when substantially greater logic capacity justifies reducing available user I/Os from 195 to 161. The XC3S250E-4FTG256C belongs to a related Spartan-3E family and should be selected only after its resource mix, voltage requirements, and timing results are fully revalidated. No verified cross-brand drop-in equivalent is established, so every substitution requires complete synthesis, timing, pin, power, and configuration checks.

대체품과의 비교

파라미터 이 제품 XC3S200A-4FTG256I XC3S200AN-4FTG256C XC3S400A-4FTG256I XC3S700A-4FTG256I XC3S250E-4FTG256C
Brand AMD AMD AMD AMD AMD AMD
Package FTBGA-256 FTBGA-256 FTBGA-256 FTBGA-256 FTBGA-256 FTBGA-256
FPGA Family Spartan-3A Spartan-3A Spartan-3A Spartan-3A Spartan-3A Spartan-3E
Operating Temperature Range 0°C to +85°C -40°C to +100°C 0°C to +85°C -40°C to +100°C -40°C to +100°C 0°C to +85°C

주요 차별점

  • Matches the original commercial-temperature configuration while extending temperature coverage (vs XC3S200A-4FTG256I)
  • Provides more logic capacity in the same FTG256 package family (vs XC3S400A-4FTG256I)
  • Offers a direct choice between logic scale and connector availability (vs XC3S700A-4FTG256I)

설계 노트

Implement the FTBGA-256 land pattern directly from AMD data sheet DS529 and its associated package drawing. Confirm ball pitches, power and ground assignments, configuration pins, and exposed thermal requirements before PCB release. Place decoupling capacitance at each supply connection as close to the device as the package geometry permits. Keep the 1.2 V core rail quiet and separate it from noisy digital or switching currents wherever the board architecture allows.

Route clocks and high-speed interfaces as controlled-impedance nets with continuous reference planes and minimal stubbing. Validate I/O standards, drive strength, and timing constraints in the FPGA implementation environment; the stated 667 MHz device frequency does not guarantee that every external interface will operate at that rate. Check setup and hold margins, clock skew, and board-level channel length after placement because package transitions and connector paths can materially affect the result.

Do not treat same-package alternatives as automatic bitstream-compatible replacements. XC3S400A-4FTG256I and XC3S700A-4FTG256I have different resource distributions, and the XC3S700A provides 161 rather than 195 user I/Os. After changing the ordering code, rerun synthesis, implementation, timing analysis, pin assignment, and configuration testing. For production use, also verify lifecycle status and obtain an authorized sourcing commitment through the Request a Quote form.

규정 준수 정보

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
무연
Yes
무할로겐
Unknown
분쟁 광물
Unknown

The component is identified as RoHS compliant and lead-free. No specific REACH, halogen-free, conflict-minerals, or automotive qualification statement is established for the exact ordering code.

관련 검색

xc3s200a 4ftg256c xc3s200a 4vqg100c xc3s200a 4vqg100i xc3s200a datasheet spartan xc3s200a xilinx xc3s200a XC3S200A-4FTG256C datasheet pdf XC3S200A-4FTG256C pinout XC3S200A-4FTG256C equivalent XC3S200A-4FTG256C replacement XC3S200A-4FTG256C footprint XC3S200A-4FTG256C price XC3S200A-4FTG256C stock

관련 부품 & 용어

AMD Xilinx XC3S200A-4FTG256C XC3S200A-4FTG256I XC3S200AN-4FTG256C XC3S400A-4FTG256I XC3S700A-4FTG256I XC3S250E-4FTG256C Spartan-3A Spartan-3E FPGA field-programmable gate array programmable logic IC integrated circuit 90 nm CMOS 4032 configurable logic cells 195 user I/Os 667 MHz 1.2 V core supply FTBGA-256 ball-grid array surface-mount package RoHS industrial data acquisition
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기