XC3S200A-4FTG256C - 4032-Cell Spartan-3A FPGA | AMD
MPN: XC3S200A-4FTG256C ✓ Hoạt độngXC3S200A-4FTG256C Tóm tắt
An FPGA is a reconfigurable digital integrated circuit whose logic, memory, and signal-processing resources can be programmed after manufacture. Unlike a fixed-function application-specific integrated circuit, the Spartan-3A architecture allows designers to implement parallel processing, control logic, interfaces, and hardware acceleration in one device. The XC3S200A-4FTG256C combines that flexibility with a relatively compact 17 mm × 17 mm ball-grid-array footprint.
The 4032-cell configuration provides substantial logic capacity for embedded control, communications, instrumentation, and industrial interface designs. Its 195 user I/Os support connections to external memory, converters, transceivers, and digital peripherals. The stated 667 MHz maximum frequency provides a concrete timing target, although actual interface performance remains dependent on the selected clock, I/O standard, routing, logic depth, and timing constraints.
The -4 speed designation identifies the device’s specified performance grade, while FTG256 denotes the 256-ball package used by this ordering variant. The C suffix identifies the commercial temperature grade, with an operating range of 0°C to +85°C. Like other FPGAs, the device is configured through a serial or parallel programming path and then operates as a configurable digital circuit rather than a conventional fixed analog or mixed-signal component.
Typical uses include industrial control systems, data-acquisition front ends, communications adapters, embedded signal processors, and compact control platforms. The 195 I/O count is especially useful when a design must retain legacy parallel interfaces while also implementing programmable logic and sequencing. The Spartan-3A family was designed for cost-sensitive, high-volume applications where field programmability reduces the need for separate fixed-function devices.
PCB design should follow the AMD Spartan-3A family data sheet DS529 for the FTBGA-256 land pattern, power rails, decoupling, configuration pins, and I/O standards. Preserve the required configuration interface, connect unused pins according to the device guidance, and verify every high-speed interface against the selected I/O standard. Because the commercial-grade device is intended for 0°C to +85°C operation, it should not be selected for a wider industrial or automotive temperature environment without a suitable grade.
This product summary consolidates the device’s principal capacity, package, speed, and application characteristics into an engineering-oriented reference. It also distinguishes same-footprint Spartan-3A options by logic density and temperature grade, helping designers identify candidate replacements while still requiring bitstream, timing, pinout, and lifecycle verification before substitution.
Bộ thay thế dễ dàng lắp đặt cho XC3S200A-4FTG256C — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC3S200A-4FTG256C (cùng hình factor và footprint) — khác nhau ở System Gates, Logic Cells, Package, Mounting Type, Operating Temperature.
XC3S200A-4FTG256I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC3S200AN-4FTG256C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC3S400A-4FTG256I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC3S700A-4FTG256I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC3S250E-4FTG256C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC3S200A-4FTG256C Tỷ lệ tối đa & tính chất điện
| Device Type | Spartan-3A field-programmable gate array (FPGA) |
| Configurable Logic Cells | 4032 cells |
| System Gates | Approximately 200000 gates |
| User I/O Count | 195 I/Os |
| Maximum Operating Frequency | 667 MHz |
| Logic Blocks | 448 CLBs |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Hộp | 256-pin FTBGA |
| Package Dimensions | 17 mm × 17 mm |
| Khoảng nhiệt độ hoạt động | 0°C to +85°C |
| Temperature Grade | Commercial (C) |
| Speed Grade | -4 |
| Kiểu lắp đặt | Surface-mount ball-grid array |
| Programming | Configurable FPGA logic |
| Lead-Free Status | Lead-free |
| Trạng thái RoHS | Compliant |
Hướng dẫn cấu hình chân XC3S200A-4FTG256C 17 mm × 17 mm
Cấu hình chân cho XC3S200A-4FTG256C (17 mm × 17 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC3S200A-4FTG256C.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC3S200A-4FTG256C phù hợp cho 6 Áp dụngs: Industrial Data-Acquisition Front End, Communications Interface Adapter, Embedded Control Platform, Programmable Signal Conditioning, Video and Display Timing Controller, Test and Measurement Control.
Industrial Data-Acquisition Front End
The XC3S200A-4FTG256C suits parallel data-acquisition systems requiring programmable control logic alongside many external connections. Its 4032 configurable cells can coordinate converters, sample sequencing, digital filtering, and data transfer, while 195 user I/Os provide ample interface capacity. Place the FPGA close enough to maintain signal integrity on multi-bit buses, and use the -4 device timing reports to establish the achievable sample rate. The commercial 0°C to +85°C range makes it appropriate for temperature-controlled enclosures rather than exposed outdoor equipment.
Được đề xuất
Communications Interface Adapter
The XC3S200A-4FTG256C can implement protocol conversion, framing, buffering, and test logic for communications equipment. The 4032-cell resource budget is useful for parallel-to-serial logic, clock-domain coordination, and supervisory state machines, and the 195 I/Os simplify connections to transceivers and memory. Designers should partition timing-critical paths carefully and avoid inferring interface performance solely from the 667 MHz device frequency. Validate each transceiver interface with the selected I/O standard and the board’s signal-integrity constraints.
Được đề xuất
Embedded Control Platform
The XC3S200A-4FTG256C is appropriate for consolidating control logic, timers, counters, condition monitoring, and peripheral interfaces into one programmable platform. Its 195 user I/Os allow direct connection to sensors, relays, converters, and human-interface circuitry, reducing the number of fixed-function devices in a compact controller. Assign pins according to the official FTBGA-256 data sheet and keep sensitive or high-speed routes away from switching nodes. The -4 grade supports design timing analysis, although each critical path must still close at the selected system clock.
Được đề xuất
Programmable Signal Conditioning
The XC3S200A-4FTG256C can implement digital filtering, gain control, calibration sequencing, and sample-path supervision in programmable instrumentation. Parallel inputs from converters can be processed concurrently, while the 4032 configurable cells provide dedicated logic for fixed-point operations and control sequencing. Keep analog and digital ground and power arrangements consistent with the board-level architecture, and route converter data according to edge-rate and return-path requirements. The device’s 1.2 V core supply also makes correct rail sequencing and local decoupling central to reliable operation.
Được đề xuất
Video and Display Timing Controller
The XC3S200A-4FTG256C can generate display timing, pixel positioning, synchronization signals, and programmable overlays in cost-sensitive display equipment. Its 4032 cells are suitable for timing-control logic rather than high-definition video pixel processing, and the 195 I/Os permit parallel connection to memory or display interfaces. Route clock and pixel-enable signals with matched length and return-path discipline, then verify setup and hold margins through implementation timing reports. The commercial temperature rating suits indoor display housings with controlled ambient conditions.
Được đề xuất
Test and Measurement Control
The XC3S200A-4FTG256C is useful for coordinating automated test equipment, programmable stimulus generation, result capture, and communications with a host controller. The large I/O count supports parallel DUT interfaces, while programmable logic can implement sequencers and protocol-specific state machines. Use deterministic clocking and isolate high-current switching paths from sensitive measurement circuitry. Timing closure for precision instruments must be based on the selected clock frequency and actual routing, not merely the advertised 667 MHz device maximum.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC3S200A-4FTG256C — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC3S200A-4FTG256I | XC3S200AN-4FTG256C | XC3S400A-4FTG256I | XC3S700A-4FTG256I | XC3S250E-4FTG256C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FTBGA-256 | FTBGA-256 | FTBGA-256 | FTBGA-256 | FTBGA-256 | FTBGA-256 |
| FPGA Family | Spartan-3A | Spartan-3A | Spartan-3A | Spartan-3A | Spartan-3A | Spartan-3E |
| Operating Temperature Range | 0°C to +85°C | -40°C to +100°C | 0°C to +85°C | -40°C to +100°C | -40°C to +100°C | 0°C to +85°C |
Bảo phân biệt quan trọng
- Matches the original commercial-temperature configuration while extending temperature coverage (vsXC3S200A-4FTG256I)
- Provides more logic capacity in the same FTG256 package family (vsXC3S400A-4FTG256I)
- Offers a direct choice between logic scale and connector availability (vsXC3S700A-4FTG256I)
Ghi chú thiết kế
Implement the FTBGA-256 land pattern directly from AMD data sheet DS529 and its associated package drawing. Confirm ball pitches, power and ground assignments, configuration pins, and exposed thermal requirements before PCB release. Place decoupling capacitance at each supply connection as close to the device as the package geometry permits. Keep the 1.2 V core rail quiet and separate it from noisy digital or switching currents wherever the board architecture allows.
Route clocks and high-speed interfaces as controlled-impedance nets with continuous reference planes and minimal stubbing. Validate I/O standards, drive strength, and timing constraints in the FPGA implementation environment; the stated 667 MHz device frequency does not guarantee that every external interface will operate at that rate. Check setup and hold margins, clock skew, and board-level channel length after placement because package transitions and connector paths can materially affect the result.
Do not treat same-package alternatives as automatic bitstream-compatible replacements. XC3S400A-4FTG256I and XC3S700A-4FTG256I have different resource distributions, and the XC3S700A provides 161 rather than 195 user I/Os. After changing the ordering code, rerun synthesis, implementation, timing analysis, pin assignment, and configuration testing. For production use, also verify lifecycle status and obtain an authorized sourcing commitment through the Request a Quote form.
Thông tin tuân thủ
The component is identified as RoHS compliant and lead-free. No specific REACH, halogen-free, conflict-minerals, or automotive qualification statement is established for the exact ordering code.