ラストタイムバイのお知らせ: XC4VFX60-11FFG672C は生産終了が近づいています。最終注文日: お問い合わせ. 利用可能な代替部品を見る →
AMD

XC4VFX60-11FFG672C - 56,880-Cell Virtex-4 FX FPGA | AMD

部品番号: XC4VFX60-11FFG672C ✗ 生産終了
1.14 V to 1.26 V, nominal 1.2 V Vdss 672-ball FCBGA Package 1,181 MHz Speed
MOQ: 1 |

XC4VFX60-11FFG672C 概要

The AMD XC4VFX60-11FFG672C is a Virtex-4 FX field-programmable gate array with 56,880 logic cells, 6,320 configurable logic blocks, a maximum clock frequency of 1,181 MHz, and a 672-ball FCBGA package. The commercial-temperature suffix C identifies the device as the 0°C to 85°C grade, while the -11 designator identifies its performance class.

An FPGA is a semiconductor whose digital logic, interfaces, and signal-processing blocks are configured after manufacture. The Virtex-4 FX family combines configurable logic blocks with dedicated processing, memory, clocking, and high-speed serial resources. This hierarchy places the XC4VFX60 in the FPGA and CPLD category, where parallel programmable logic, embedded hard processors, and high-speed I/O can support complete digital subsystems on one device.

Key resources include 4,276,224 RAM bits, two embedded PowerPC 405 processor cores, and as many as 16 RocketIO multi-gigabit transceivers. The device provides 352 user I/Os and operates from a nominal 1.2 V core supply, with a reported range of 1.14 V to 1.26 V. These resources make the FPGA suitable for parallel data processing, embedded control, telecommunications, industrial equipment, and high-speed serial interfaces.

The Virtex-4 FX architecture is implemented on 90 nm copper CMOS technology. Its combination of 6,320 configurable logic blocks and hard processor cores allows designers to partition a design between programmable logic and dedicated embedded processing. The 1,181 MHz figure is the maximum internal clock stated for this family, rather than a guarantee that every design or I/O interface will operate at that rate.

Typical applications include telecom line cards, industrial control systems, network interface equipment, high-speed protocol bridges, embedded processors, and test systems requiring substantial parallel logic. The 672-ball FCBGA also provides a large pin count for high-speed differential pairs, memory connections, clocks, and programmable I/O. The number of available RocketIO channels depends on the selected device, package, pin configuration, and design constraints.

Designers should verify the exact bank voltages, pin assignments, configuration requirements, and differential I/O rules against the AMD package pinout files before layout release. A 27 mm by 27 mm BGA requires careful escape routing, adequate via access, and a thermal design that accounts for the concentration of power and ground balls beneath the device.

This page combines the device architecture, package characteristics, configuration guidance, drop-in family alternatives, and application-oriented design notes. It also provides search-focused technical comparisons for engineers evaluating PCB reuse, speed-grade substitution, temperature-grade substitution, and FPGA resource planning.

ドロップイン代替品: XC4VFX60-11FFG672C — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: XC4VFX60-11FFG672C (同一形状・フットプリント) — 相違点: Device Type, Process Technology, AEC-Q100 Qualification, Speed Grade, Core Supply Voltage.

AMD
Device Type: Virtex-4 FX field-programmable gate array
AEC-Q100 Qualification: Not applicable
Core Supply Voltage: 1.2 V
比較対象 XC4VFX60-11FFG672C →
AMD
Device Type: Virtex-4 FX Field Programmable Gate Array
Process Technology: 90 nm CMOS
AEC-Q100 Qualification: unknown
比較対象 XC4VFX60-11FFG672C →
AMD
Device Type: Virtex-4 FX field-programmable gate array (FPGA)
Process Technology: 90 nm
Speed Grade: -10
比較対象 XC4VFX60-11FFG672C →
AMD
Device Type: Virtex-4 FX field-programmable gate array
Process Technology: 90 nm CMOS
AEC-Q100 Qualification: not_applicable
比較対象 XC4VFX60-11FFG672C →
AMD
Device Type: Virtex-4 FX field-programmable gate array
Process Technology: 90 nm CMOS
Core Supply Voltage: 1.2 V
比較対象 XC4VFX60-11FFG672C →

XC4VFX60-10FFG672C

✅ ドロップイン ⚠️ 仕様未検証
AMD
📦 672-ball FCBGA
Virtex-4 FX field-programmable gate array (FPGA) · 56,880 cells · 352 I/O · 90 nm · 1.2 V · -10 · 672-pin FCBGA · Virtex-4 FX

価格はお問い合わせください

データシートを見る →

XC4VFX60-12FFG672C

✅ ドロップイン ⚠️ 仕様未検証
📦 672-ball FCBGA
Same 56,880 logic cells, 6,320 CLBs, two processor cores, and 672-ball package; speed-grade index improves by one from -11 to -12, while commercial temperature remains unchanged.

📋 参考代替品(カタログ未掲載)

XC4VFX60-11FFG672I

✅ ドロップイン ⚠️ 仕様未検証
AMD
📦 672-ball FCBGA
Virtex-4 FX field-programmable gate array · 56,880 cells · 6,320 blocks · 352 I/O · 672-ball FCBGA · 90 nm CMOS · 1.2 V · 1.14 V to 1.26 V

価格はお問い合わせください

データシートを見る →

XC4VFX60-10FFG672I

✅ ドロップイン ⚠️ 仕様未検証
AMD
📦 672-ball FCBGA
Virtex-4 FX Field Programmable Gate Array · 56,880 cells · 6,320 CLBs · 4,276,224 bits · 352 I/Os · 90 nm CMOS · 1.2 V · 2 PowerPC 405 RISC cores

価格はお問い合わせください

データシートを見る →

XC4VFX60-12FFG672I

✅ ドロップイン ⚠️ 仕様未検証
📦 672-ball FCBGA
Same 56,880 logic cells, 6,320 CLBs, two processor cores, and 672-ball package; speed-grade index improves by one from -11 to -12 and the suffix changes from commercial C to industrial I.

📋 参考代替品(カタログ未掲載)

XC4VFX60-11FFG672C 最大定格&電気的特性

Product Type Virtex-4 FX field-programmable gate array
Logic Cells 56,880 cells
Configurable Logic Blocks 6,320 CLBs
Maximum Internal Frequency 1,181 MHz
Total RAM 4,276,224 bits
Embedded Processor Cores 2 PowerPC 405 RISC cores
RocketIO Transceivers Up to 16 multi-gigabit transceivers
RocketIO Data Rate 622 Mb/s to 6.5 Gb/s
User I/O Count 352 I/Os
Core Supply Voltage 1.14 V to 1.26 V, nominal 1.2 V
Process Technology 90 nm copper CMOS
パッケージ 672-ball FCBGA
Package Dimensions 27 mm x 27 mm
動作温度 0°C to 85°C
Device Logic Family CMOS
Combinatorial CLB Delay 0.17 ns per CLB
Speed Grade -11
RoHS ステータス unknown
REACH Status unknown

XC4VFX60-11FFG672C 27 mm x 27 mm ピン配置ガイド

XC4VFX60-11FFG672C (27 mm x 27 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

XC4VFX60-11FFG672C の 27 mm x 27 mm パッケージピン配置図

詳細なピン配置データはありません: XC4VFX60-11FFG672C.

詳細は データシート をご参照ください。

主な用途

XC4VFX60-11FFG672C の用途: 6 件s: Telecommunications Line Cards, High-Speed Network Interface Equipment, Industrial Control and Automation, Embedded Processor Subsystems, High-Speed Data Acquisition and Signal Processing, Aerospace and Defense Test Equipment.

🌐

Telecommunications Line Cards

The XC4VFX60-11FFG672C fits telecommunications line-card designs that combine high-throughput serial links with substantial configurable logic. Its up to 16 RocketIO transceivers can operate from 622 Mb/s to 6.5 Gb/s, while 56,880 logic cells support packet processing, framing, buffering, and control functions. The two embedded PowerPC 405 cores allow software to handle supervisory or real-time tasks without offloading every function to programmable logic. Use the 352 user I/Os for parallel management interfaces and slower external connectivity, then verify each transceiver's legal encoding, reference clock, and lane allocation for the target protocol.

🌐

High-Speed Network Interface Equipment

The XC4VFX60-11FFG672C is suitable for network interface equipment that separates high-speed serial traffic from parallel packet-processing logic. RocketIO transceivers can provide multi-gigabit physical interfaces, while the 6,320 CLBs implement routing, classification, queues, and protocol adaptation. Its 4,276,224 RAM bits support buffering and working storage, and the two PowerPC 405 cores can supervise the FPGA configuration or handle control-plane software. The maximum 1,181 MHz internal frequency provides substantial timing headroom for many designs, but actual interface throughput must be established through placement, timing analysis, and board-level signal-integrity validation.

🏭

Industrial Control and Automation

The XC4VFX60-11FFG672C supports industrial control and automation systems that combine deterministic parallel logic with embedded processor functionality. The commercial-temperature version operates from 0°C to 85°C, making it appropriate for controlled indoor equipment that remains within that range. Engineers can map machine-control, sequencing, and I/O arbitration into 6,320 CLBs while the two PowerPC 405 cores handle supervisory tasks or real-time control code. Its 352 user I/Os provide substantial connectivity for digital and analog interfaces, although every external driver and transceiver must be checked against the device's I/O standard, voltage, and timing limits.

🖥️

Embedded Processor Subsystems

The XC4VFX60-11FFG672C is useful when a design needs programmable hardware and embedded software in one FPGA. Two hard PowerPC 405 RISC cores can execute firmware or application tasks, while 56,880 logic cells accelerate parallel algorithms, custom peripherals, or data movement. The device's 4,276,224 RAM bits provide on-chip storage, and 352 user I/Os can connect the subsystem to external memories and control logic. This partition reduces reliance on external glue logic, but partitioning must be planned carefully because fixed hard blocks and dedicated resources are not interchangeable with general-purpose configurable logic.

📺

High-Speed Data Acquisition and Signal Processing

The XC4VFX60-11FFG672C can implement parallel data acquisition, filtering, correlation, or other fixed-function signal processing beside embedded control. Its 6,320 configurable logic blocks allow wide pipelines to operate concurrently, while the 4,276,224 RAM bits support sample buffers, look-up tables, and working memory. The two processor cores can coordinate control flow and configuration, and the 352 user I/Os provide interfaces for converters, memory devices, and synchronization signals. For very high-rate links, use RocketIO with suitable clocking and equalization, and verify analog-interface timing independently because the maximum internal frequency does not determine external converter bandwidth.

✈️

Aerospace and Defense Test Equipment

The XC4VFX60-11FFG672C can be used in ground-based aerospace and defense test systems where programmable logic, embedded processors, and high-speed serial communication are required. Its 16 potential RocketIO channels support multi-gigabit test interfaces, while the large programmable fabric can implement protocol engines, capture logic, and timing checks. The two PowerPC 405 cores can coordinate test sequences and maintain control interfaces, and 352 user I/Os support instrumentation and trigger signals. The commercial C temperature grade limits direct use to 0°C to 85°C, so deployed environments outside that range should use an appropriately qualified device and formal procurement process.

What is the AMD XC4VFX60-11FFG672C?
The AMD XC4VFX60-11FFG672C is a Virtex-4 FX FPGA containing 56,880 logic cells, 6,320 configurable logic blocks, and two embedded PowerPC 405 processor cores in a 672-ball FCBGA package. According to the AMD Virtex-4 Family Overview Data Sheet (DS112), the device also provides 4,276,224 RAM bits, up to 16 RocketIO transceivers, and 352 user I/Os. It is built on 90 nm copper CMOS and carries the -11 speed grade with a commercial 0°C to 85°C temperature designation.
What are the key specifications of XC4VFX60-11FFG672C?
The XC4VFX60-11FFG672C provides 56,880 logic cells, 6,320 CLBs, 4,276,224 RAM bits, two PowerPC 405 cores, and up to 16 RocketIO transceivers. Its maximum stated internal frequency is 1,181 MHz, while the nominal core supply is 1.2 V. The AMD Virtex-4 Family Overview Data Sheet (DS112) identifies the device as a 90 nm copper CMOS FPGA in a 672-ball FCBGA package. These figures describe device resources rather than guaranteed user-level performance, which also depends on timing closure, logic mapping, and I/O constraints.
Where can I download the XC4VFX60-11FFG672C datasheet?
The official AMD Virtex-4 Family Overview Data Sheet (DS112) can be opened through the AMD documentation link on this page, and exact package assignments are available from AMD's Virtex-4 package pinout files. The DS112 document describes the device family, architecture, resources, speed grades, and electrical characteristics. Use the package-specific pinout file when assigning balls to a 672-footprint PCB, because the family overview does not replace the complete package pin-description table.
Where can I find the XC4VFX60-11FFG672C pinout?
The XC4VFX60-11FFG672C pinout is defined by AMD's Virtex-4 package device pinout files, published as ASCII text files for package-specific ball assignments. The device uses a 672-ball FCBGA package measuring 27 mm by 27 mm. Use those files to identify power, ground, configuration, clock, user I/O, and RocketIO balls before routing the PCB. The family overview document DS112 can be used alongside the pinout files for electrical and architectural information.
Is XC4VFX60-11FFG672C suitable for industrial control systems?
The XC4VFX60-11FFG672C can be used in industrial control designs that stay within its stated 0°C to 85°C commercial temperature range. Its 56,880 logic cells and 352 user I/Os support parallel control logic, while the two PowerPC 405 cores can handle supervisory or real-time software tasks. According to AMD DS112, the FPGA also contains dedicated memory and high-speed serial resources. If the enclosure regularly exceeds 85°C, select a documented industrial-temperature grade rather than relying on the commercial C suffix.
What is the difference between XC4VFX60-11FFG672C and XC4VFX60-10FFG672C?
The XC4VFX60-11FFG672C and XC4VFX60-10FFG672C share the Virtex-4 FX device family, 672-ball package form, and -11 versus -10 speed-grade positions. The -10 ordering code represents one higher performance-grade index than -11, while the core resource count and commercial temperature designation remain unchanged for this family. According to AMD DS112, Virtex-4 devices are offered in -12, -11, and -10 grades, with -12 being the highest-performance class. Validate timing, power, and tool-supported device substitution before PCB reuse.
Can XC4VFX60-11FFG672I replace XC4VFX60-11FFG672C?
The XC4VFX60-11FFG672I is the industrial-temperature counterpart of the XC4VFX60-11FFG672C and uses the same 672-ball package configuration. The functional difference is the temperature suffix: the C part is specified from 0°C to 85°C, while the I part is intended for an industrial temperature range. According to AMD DS112, both retain the -11 speed grade and the same Virtex-4 FX resource architecture. Pin and design compatibility must still be confirmed against the package pinout and device configuration files.
What can replace XC4VFX60-11FFG672C?
The closest documented replacements are same-family AMD Virtex-4 FX devices with the same 672-ball package: XC4VFX60-10FFG672C, XC4VFX60-12FFG672C, XC4VFX60-11FFG672I, XC4VFX60-10FFG672I, and XC4VFX60-12FFG672I. They preserve the 56,880 logic-cell, 6,320-CLB, two-core, and 352-I/O architecture while changing speed or temperature ordering codes. No verified cross-brand pin-compatible equivalent was identified. Treat these as engineering substitutions and verify timing, power, temperature, and configuration-file compatibility.
What is the best cross-brand equivalent for XC4VFX60-11FFG672C?
No cross-brand, pin-compatible drop-in equivalent is established for the XC4VFX60-11FFG672C in the available device documentation. The AMD device combines a 672-ball FCBGA footprint with Virtex-4-specific hard blocks, including two PowerPC 405 processor cores and RocketIO transceivers, so a generic FPGA with a similar ball count is not automatically interchangeable. Use same-family AMD ordering-code variants for drop-in consideration, and request a formal manufacturer migration review for any cross-brand redesign.
When should I choose XC4VFX60-11FFG672C over a higher speed-grade variant?
Choose the XC4VFX60-11FFG672C when the design meets timing at the -11 speed grade and the required enclosure temperature remains within 0°C to 85°C. It is preferable to a -10 or -12 variant when lower power, easier timing closure, or cost is more important than maximum performance. The device still provides 56,880 logic cells, 4,276,224 RAM bits, two processor cores, and up to 16 RocketIO channels. Final selection should use static timing analysis because the 1,181 MHz family figure is not a blanket user-interface frequency guarantee.
Is XC4VFX60-11FFG672C suitable for high-speed communications equipment?
The XC4VFX60-11FFG672C is suitable for communications equipment requiring programmable logic and multi-gigabit serial connectivity. According to AMD DS112 and the device listing, it includes up to 16 RocketIO transceivers operating from 622 Mb/s to 6.5 Gb/s, alongside 56,880 logic cells and 352 user I/Os. RocketIO channels can support protocol-specific high-speed links, while parallel I/O handle controls and slower interfaces. Channel availability, clocking, reference sources, and legal encoding must be checked in the selected design configuration.
What power and thermal considerations apply to XC4VFX60-11FFG672C?
The XC4VFX60-11FFG672C uses a nominal 1.2 V core supply, but actual power depends on configuration, clock rates, I/O activity, and the number of active hard blocks. Its 672-ball FCBGA provides numerous power and ground connections, making careful plane assignment and thermal design essential. Use the AMD power-estimation methodology and the selected design's utilization report for a defensible estimate. Provide copper thermal paths, plan decoupling for each supply bank, and validate the assembled board across temperature, voltage, and activity conditions.
Where can I buy XC4VFX60-11FFG672C online?
The XC4VFX60-11FFG672C can be requested through the Request a Quote form on this page. The form is the appropriate route for checking current availability, package quantity, and lead time because inventory for this legacy Virtex-4 device can vary. The exact ordering code must remain unchanged: XC4VFX60-11FFG672C. Confirm that the supplied unit matches the 672-ball FCBGA, -11 speed grade, and commercial-temperature suffix before authorizing a purchase.
What is the price of XC4VFX60-11FFG672C?
The current XC4VFX60-11FFG672C price is not published as a static figure on this page because the device is a legacy FPGA whose commercial availability may vary. Use the Request a Quote form on this page for the current unit and volume pricing. When requesting a quotation, include the required quantity, delivery location, and packaging preference. Confirm that the quotation applies specifically to XC4VFX60-11FFG672C, since related speed grades, temperature grades, and ordering suffixes are distinct device configurations.
What is the lead time for XC4VFX60-11FFG672C?
The current lead time for XC4VFX60-11FFG672C depends on available inventory, requested quantity, and packaging, so request a quotation through the Request a Quote form on this page. The device belongs to the mature Virtex-4 FX family and may not be stocked uniformly across channels. Specify a forecast and required shipment date so procurement can confirm the exact MPN and available delivery schedule. Do not substitute a different suffix without checking speed grade, temperature grade, package construction, and PCB compatibility.
Is XC4VFX60-11FFG672C in stock?
Stock status for XC4VFX60-11FFG672C must be confirmed through the Request a Quote form on this page because availability changes with quantity and replenishment. The exact 672-ball FCBGA configuration is identified by the FFG672 portion of the ordering code, followed by the C commercial-temperature suffix. Ask the supplier to confirm the complete MPN, date code, package condition, and quantity available. If an obsolete or unverified unit is offered, request its traceability and inspection details before use in production.
What tools and documentation are needed to design with XC4VFX60-11FFG672C?
Use the AMD ISE Design Suite generation that supports Virtex-4 devices, together with the official Virtex-4 Family Overview Data Sheet (DS112), package pinout files, and device-specific configuration documentation. The design flow should include synthesis, mapping, placement, routing, static timing analysis, and simulation for the selected -11 commercial-temperature device. Because this is a mature architecture, record the exact tool release, device files, constraints, and bitstream configuration in the design archive to support maintenance and reproduction.

エンジニアリング参考データ: XC4VFX60-11FFG672C — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the XC4VFX60-11FFG672C when the system remains between 0°C and 85°C, the -11 grade meets timing, and preserving a specific legacy device identity simplifies qualification or certification. Select XC4VFX60-10FFG672C or XC4VFX60-12FFG672C when one additional speed-grade step is useful and the revised timing and power characteristics are acceptable; both retain the same core resource counts and package. Select an I-suffix variant when industrial-temperature operation is required, with the exact qualified temperature limits confirmed from the device documentation. No cross-brand drop-in replacement is established because Virtex-4-specific processor cores, RocketIO resources, and package assignments make generic substitutions risky. For any same-family alternative, regenerate the bitstream, rerun static timing and power analysis, confirm configuration-file support, and review the exact package pinout before releasing the PCB.

代替品との比較

パラメータ この製品 XC4VFX60-10FFG672C XC4VFX60-12FFG672C XC4VFX60-11FFG672I XC4VFX60-10FFG672I XC4VFX60-12FFG672I
Brand AMD AMD AMD AMD AMD AMD
Package 672-ball FCBGA, 27 mm x 27 mm 672-ball FCBGA, 27 mm x 27 mm 672-ball FCBGA, 27 mm x 27 mm 672-ball FCBGA, 27 mm x 27 mm 672-ball FCBGA, 27 mm x 27 mm 672-ball FCBGA, 27 mm x 27 mm
Logic Cells 56,880 cells 56,880 cells 56,880 cells 56,880 cells 56,880 cells 56,880 cells
Configurable Logic Blocks 6,320 CLBs 6,320 CLBs 6,320 CLBs 6,320 CLBs 6,320 CLBs 6,320 CLBs
Total RAM 4,276,224 bits 4,276,224 bits 4,276,224 bits 4,276,224 bits 4,276,224 bits 4,276,224 bits
User I/O Count 352 I/Os 352 I/Os 352 I/Os 352 I/Os 352 I/Os 352 I/Os
Embedded Processor Cores 2 PowerPC 405 RISC cores 2 PowerPC 405 RISC cores 2 PowerPC 405 RISC cores 2 PowerPC 405 RISC cores 2 PowerPC 405 RISC cores 2 PowerPC 405 RISC cores
RocketIO Transceivers Up to 16 transceivers, 622 Mb/s to 6.5 Gb/s Up to 16 transceivers Up to 16 transceivers Up to 16 transceivers Up to 16 transceivers Up to 16 transceivers

主な差別化要因

  • Preserves the complete resource configuration across ordering-code alternatives (vs XC4VFX60-11FFG672I)
  • Offers a one-step speed-grade upgrade without changing the core resource counts (vs XC4VFX60-10FFG672C)
  • Highest listed same-family speed-grade option retains the target architecture (vs XC4VFX60-12FFG672C)
  • Combines programmable logic, embedded processors, and serial transceivers in one FPGA (vs XC4VFX60-10FFG672I)

設計ノート

Use the AMD Virtex-4 package pinout file as the authoritative ball map for the 672-footprint PCB. Keep configuration pins, dedicated clock inputs, RocketIO balls, power, ground, and user I/O clearly separated in the schematic-to-PCB review. Place all prescribed decoupling capacitors close to their associated supply balls, maintain the package's via and ball-pitch requirements, and avoid routing high-speed differential pairs beneath areas that cannot support controlled impedance.

The nominal core voltage is 1.2 V, with a reported operating range of 1.14 V to 1.26 V. Use separate, low-impedance distribution for the core and I/O supply banks, and verify regulator sequencing against the AMD device guidance. Estimated: power equals core voltage multiplied by core current plus the voltage and current of each active I/O bank; actual consumption depends on clocking, utilization, I/O standards, and state. Generate a project-specific power estimate after synthesis and implementation.

A 27 mm by 27 mm FCBGA concentrates many power and ground connections beneath the device, but package size alone does not establish safe dissipation. Route power and ground planes into the ball field, minimize thermal discontinuities, and provide an uninterrupted top-layer or multilayer copper heat-spreading path where mechanical and assembly rules permit. Estimated: junction rise equals device dissipation multiplied by the effective board thermal resistance; verify that the resulting junction temperature remains below the device limit at the worst ambient and activity condition.

RocketIO links require controlled-impedance routing, appropriate layer transitions, matched reference-clock distribution, and the device's documented termination and bypass arrangements. Do not infer usable throughput from the 1,181 MHz maximum internal clock; serialize and deserialize interfaces, clock relationships, coding constraints, and board losses determine link performance. Run post-route timing and signal-integrity simulations with realistic layer stacks and verify the final design on hardware across required temperature and voltage conditions.

Avoid treating all XC4VFX60 ordering codes as interchangeable without checking the speed suffix, temperature suffix, package code, configuration bitstream, and exact device name. The -10 and -12 variants change the speed-grade index, while I and C identify different temperature classes. A valid replacement still requires an unchanged 672-ball footprint, compatible power behavior, acceptable timing margin, and a configuration file generated for the substituted MPN. Record the final device identity in the design archive and manufacturing BOM.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact MPN. The FFG672 package code is retained as part of the ordering identity, but it must not be treated as a standalone lead-free compliance claim.

データ検証日: 2026-11-18 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

xc4vfx60 10ffg1152c XC4VFX60-11FFG672C datasheet XC4VFX60-11FFG672C datasheet pdf XC4VFX60-11FFG672C pinout XC4VFX60-11FFG672C specifications XC4VFX60-11FFG672C 672 FBGA XC4VFX60-11FFG672C equivalent XC4VFX60-11FFG672C replacement XC4VFX60-11FFG672C vs XC4VFX60-10FFG672C AMD XC4VFX60-11FFG672C XC4VFX60-11FFG672C application circuit XC4VFX60-11FFG672C price XC4VFX60-11FFG672C stock

関連部品&用語

AMD Xilinx XC4VFX60-11FFG672C XC4VFX60-10FFG672C XC4VFX60-12FFG672C XC4VFX60-11FFG672I XC4VFX60-10FFG672I XC4VFX60-12FFG672I Virtex-4 FX Field-programmable gate array FPGA Configurable Logic Block CLB PowerPC 405 RISC core RocketIO transceiver Block RAM 90 nm copper CMOS 672-ball FCBGA BGA package family Surface mount Industrial control system Telecommunications line card High-speed serial communication RocketIO DS112
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示