XC4VFX60-11FFG672C - 56,880-Cell Virtex-4 FX FPGA | AMD
MPN: XC4VFX60-11FFG672C ✗ Cuối đờiXC4VFX60-11FFG672C Tóm tắt
An FPGA is a semiconductor whose digital logic, interfaces, and signal-processing blocks are configured after manufacture. The Virtex-4 FX family combines configurable logic blocks with dedicated processing, memory, clocking, and high-speed serial resources. This hierarchy places the XC4VFX60 in the FPGA and CPLD category, where parallel programmable logic, embedded hard processors, and high-speed I/O can support complete digital subsystems on one device.
Key resources include 4,276,224 RAM bits, two embedded PowerPC 405 processor cores, and as many as 16 RocketIO multi-gigabit transceivers. The device provides 352 user I/Os and operates from a nominal 1.2 V core supply, with a reported range of 1.14 V to 1.26 V. These resources make the FPGA suitable for parallel data processing, embedded control, telecommunications, industrial equipment, and high-speed serial interfaces.
The Virtex-4 FX architecture is implemented on 90 nm copper CMOS technology. Its combination of 6,320 configurable logic blocks and hard processor cores allows designers to partition a design between programmable logic and dedicated embedded processing. The 1,181 MHz figure is the maximum internal clock stated for this family, rather than a guarantee that every design or I/O interface will operate at that rate.
Typical applications include telecom line cards, industrial control systems, network interface equipment, high-speed protocol bridges, embedded processors, and test systems requiring substantial parallel logic. The 672-ball FCBGA also provides a large pin count for high-speed differential pairs, memory connections, clocks, and programmable I/O. The number of available RocketIO channels depends on the selected device, package, pin configuration, and design constraints.
Designers should verify the exact bank voltages, pin assignments, configuration requirements, and differential I/O rules against the AMD package pinout files before layout release. A 27 mm by 27 mm BGA requires careful escape routing, adequate via access, and a thermal design that accounts for the concentration of power and ground balls beneath the device.
This page combines the device architecture, package characteristics, configuration guidance, drop-in family alternatives, and application-oriented design notes. It also provides search-focused technical comparisons for engineers evaluating PCB reuse, speed-grade substitution, temperature-grade substitution, and FPGA resource planning.
Bộ thay thế dễ dàng lắp đặt cho XC4VFX60-11FFG672C — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC4VFX60-11FFG672C (cùng hình factor và footprint) — khác nhau ở Device Type, Process Technology, AEC-Q100 Qualification, Speed Grade, Core Supply Voltage.
XC4VFX60-10FFG672C
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XC4VFX60-12FFG672C
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC4VFX60-11FFG672I
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XC4VFX60-10FFG672I
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XC4VFX60-12FFG672I
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC4VFX60-11FFG672C Tỷ lệ tối đa & tính chất điện
| Product Type | Virtex-4 FX field-programmable gate array |
| Logic Cells | 56,880 cells |
| Configurable Logic Blocks | 6,320 CLBs |
| Maximum Internal Frequency | 1,181 MHz |
| Total RAM | 4,276,224 bits |
| Embedded Processor Cores | 2 PowerPC 405 RISC cores |
| RocketIO Transceivers | Up to 16 multi-gigabit transceivers |
| RocketIO Data Rate | 622 Mb/s to 6.5 Gb/s |
| User I/O Count | 352 I/Os |
| Core Supply Voltage | 1.14 V to 1.26 V, nominal 1.2 V |
| Process Technology | 90 nm copper CMOS |
| Hộp | 672-ball FCBGA |
| Package Dimensions | 27 mm x 27 mm |
| Nhiệt độ hoạt động | 0°C to 85°C |
| Device Logic Family | CMOS |
| Combinatorial CLB Delay | 0.17 ns per CLB |
| Speed Grade | -11 |
| Trạng thái RoHS | unknown |
| REACH Status | unknown |
Hướng dẫn cấu hình chân XC4VFX60-11FFG672C 27 mm x 27 mm
Cấu hình chân cho XC4VFX60-11FFG672C (27 mm x 27 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC4VFX60-11FFG672C.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC4VFX60-11FFG672C phù hợp cho 6 Áp dụngs: Telecommunications Line Cards, High-Speed Network Interface Equipment, Industrial Control and Automation, Embedded Processor Subsystems, High-Speed Data Acquisition and Signal Processing, Aerospace and Defense Test Equipment.
Telecommunications Line Cards
The XC4VFX60-11FFG672C fits telecommunications line-card designs that combine high-throughput serial links with substantial configurable logic. Its up to 16 RocketIO transceivers can operate from 622 Mb/s to 6.5 Gb/s, while 56,880 logic cells support packet processing, framing, buffering, and control functions. The two embedded PowerPC 405 cores allow software to handle supervisory or real-time tasks without offloading every function to programmable logic. Use the 352 user I/Os for parallel management interfaces and slower external connectivity, then verify each transceiver's legal encoding, reference clock, and lane allocation for the target protocol.
Được đề xuất
High-Speed Network Interface Equipment
The XC4VFX60-11FFG672C is suitable for network interface equipment that separates high-speed serial traffic from parallel packet-processing logic. RocketIO transceivers can provide multi-gigabit physical interfaces, while the 6,320 CLBs implement routing, classification, queues, and protocol adaptation. Its 4,276,224 RAM bits support buffering and working storage, and the two PowerPC 405 cores can supervise the FPGA configuration or handle control-plane software. The maximum 1,181 MHz internal frequency provides substantial timing headroom for many designs, but actual interface throughput must be established through placement, timing analysis, and board-level signal-integrity validation.
Được đề xuất
Industrial Control and Automation
The XC4VFX60-11FFG672C supports industrial control and automation systems that combine deterministic parallel logic with embedded processor functionality. The commercial-temperature version operates from 0°C to 85°C, making it appropriate for controlled indoor equipment that remains within that range. Engineers can map machine-control, sequencing, and I/O arbitration into 6,320 CLBs while the two PowerPC 405 cores handle supervisory tasks or real-time control code. Its 352 user I/Os provide substantial connectivity for digital and analog interfaces, although every external driver and transceiver must be checked against the device's I/O standard, voltage, and timing limits.
Được đề xuất
Embedded Processor Subsystems
The XC4VFX60-11FFG672C is useful when a design needs programmable hardware and embedded software in one FPGA. Two hard PowerPC 405 RISC cores can execute firmware or application tasks, while 56,880 logic cells accelerate parallel algorithms, custom peripherals, or data movement. The device's 4,276,224 RAM bits provide on-chip storage, and 352 user I/Os can connect the subsystem to external memories and control logic. This partition reduces reliance on external glue logic, but partitioning must be planned carefully because fixed hard blocks and dedicated resources are not interchangeable with general-purpose configurable logic.
Được đề xuất
High-Speed Data Acquisition and Signal Processing
The XC4VFX60-11FFG672C can implement parallel data acquisition, filtering, correlation, or other fixed-function signal processing beside embedded control. Its 6,320 configurable logic blocks allow wide pipelines to operate concurrently, while the 4,276,224 RAM bits support sample buffers, look-up tables, and working memory. The two processor cores can coordinate control flow and configuration, and the 352 user I/Os provide interfaces for converters, memory devices, and synchronization signals. For very high-rate links, use RocketIO with suitable clocking and equalization, and verify analog-interface timing independently because the maximum internal frequency does not determine external converter bandwidth.
Được đề xuất
Aerospace and Defense Test Equipment
The XC4VFX60-11FFG672C can be used in ground-based aerospace and defense test systems where programmable logic, embedded processors, and high-speed serial communication are required. Its 16 potential RocketIO channels support multi-gigabit test interfaces, while the large programmable fabric can implement protocol engines, capture logic, and timing checks. The two PowerPC 405 cores can coordinate test sequences and maintain control interfaces, and 352 user I/Os support instrumentation and trigger signals. The commercial C temperature grade limits direct use to 0°C to 85°C, so deployed environments outside that range should use an appropriately qualified device and formal procurement process.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC4VFX60-11FFG672C — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC4VFX60-10FFG672C | XC4VFX60-12FFG672C | XC4VFX60-11FFG672I | XC4VFX60-10FFG672I | XC4VFX60-12FFG672I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 672-ball FCBGA, 27 mm x 27 mm | 672-ball FCBGA, 27 mm x 27 mm | 672-ball FCBGA, 27 mm x 27 mm | 672-ball FCBGA, 27 mm x 27 mm | 672-ball FCBGA, 27 mm x 27 mm | 672-ball FCBGA, 27 mm x 27 mm |
| Logic Cells | 56,880 cells | 56,880 cells | 56,880 cells | 56,880 cells | 56,880 cells | 56,880 cells |
| Configurable Logic Blocks | 6,320 CLBs | 6,320 CLBs | 6,320 CLBs | 6,320 CLBs | 6,320 CLBs | 6,320 CLBs |
| Total RAM | 4,276,224 bits | 4,276,224 bits | 4,276,224 bits | 4,276,224 bits | 4,276,224 bits | 4,276,224 bits |
| User I/O Count | 352 I/Os | 352 I/Os | 352 I/Os | 352 I/Os | 352 I/Os | 352 I/Os |
| Embedded Processor Cores | 2 PowerPC 405 RISC cores | 2 PowerPC 405 RISC cores | 2 PowerPC 405 RISC cores | 2 PowerPC 405 RISC cores | 2 PowerPC 405 RISC cores | 2 PowerPC 405 RISC cores |
| RocketIO Transceivers | Up to 16 transceivers, 622 Mb/s to 6.5 Gb/s | Up to 16 transceivers | Up to 16 transceivers | Up to 16 transceivers | Up to 16 transceivers | Up to 16 transceivers |
Bảo phân biệt quan trọng
- Preserves the complete resource configuration across ordering-code alternatives (vsXC4VFX60-11FFG672I)
- Offers a one-step speed-grade upgrade without changing the core resource counts (vsXC4VFX60-10FFG672C)
- Highest listed same-family speed-grade option retains the target architecture (vsXC4VFX60-12FFG672C)
- Combines programmable logic, embedded processors, and serial transceivers in one FPGA (vsXC4VFX60-10FFG672I)
Ghi chú thiết kế
Use the AMD Virtex-4 package pinout file as the authoritative ball map for the 672-footprint PCB. Keep configuration pins, dedicated clock inputs, RocketIO balls, power, ground, and user I/O clearly separated in the schematic-to-PCB review. Place all prescribed decoupling capacitors close to their associated supply balls, maintain the package's via and ball-pitch requirements, and avoid routing high-speed differential pairs beneath areas that cannot support controlled impedance.
The nominal core voltage is 1.2 V, with a reported operating range of 1.14 V to 1.26 V. Use separate, low-impedance distribution for the core and I/O supply banks, and verify regulator sequencing against the AMD device guidance. Estimated: power equals core voltage multiplied by core current plus the voltage and current of each active I/O bank; actual consumption depends on clocking, utilization, I/O standards, and state. Generate a project-specific power estimate after synthesis and implementation.
A 27 mm by 27 mm FCBGA concentrates many power and ground connections beneath the device, but package size alone does not establish safe dissipation. Route power and ground planes into the ball field, minimize thermal discontinuities, and provide an uninterrupted top-layer or multilayer copper heat-spreading path where mechanical and assembly rules permit. Estimated: junction rise equals device dissipation multiplied by the effective board thermal resistance; verify that the resulting junction temperature remains below the device limit at the worst ambient and activity condition.
RocketIO links require controlled-impedance routing, appropriate layer transitions, matched reference-clock distribution, and the device's documented termination and bypass arrangements. Do not infer usable throughput from the 1,181 MHz maximum internal clock; serialize and deserialize interfaces, clock relationships, coding constraints, and board losses determine link performance. Run post-route timing and signal-integrity simulations with realistic layer stacks and verify the final design on hardware across required temperature and voltage conditions.
Avoid treating all XC4VFX60 ordering codes as interchangeable without checking the speed suffix, temperature suffix, package code, configuration bitstream, and exact device name. The -10 and -12 variants change the speed-grade index, while I and C identify different temperature classes. A valid replacement still requires an unchanged 672-ball footprint, compatible power behavior, acceptable timing margin, and a configuration file generated for the substituted MPN. Record the final device identity in the design archive and manufacturing BOM.
Thông tin tuân thủ
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact MPN. The FFG672 package code is retained as part of the ordering identity, but it must not be treated as a standalone lead-free compliance claim.