XC7Z030-1FBG676I - 125K Zynq SoC, 667MHz, 676-FCBGA | AMD
MPN: XC7Z030-1FBG676I ✓ সক্রিয়XC7Z030-1FBG676I সারাংশ
A Zynq system-on-chip is a heterogeneous processing platform that combines an ARM-based microprocessor subsystem with programmable FPGA logic in the same package. The XC7Z030 belongs to the FPGA and CPLD category while integrating an ARM Cortex-A9 MPCore processor, dedicated memory controllers, programmable logic, and debug resources. This combination supports hardware-assisted control, real-time processing, and flexible peripheral or algorithm implementation without requiring separate discrete devices.
Key device characteristics include 125K FPGA logic cells, 667 MHz processor performance, dual ARM Cortex-A9 cores, and CoreSight debug capability. The -1 speed designation identifies the lower-speed grade in the XC7Z030 family, while the industrial I suffix identifies its intended operating-temperature class. The 676-FCBGA package supports high-density interconnect requirements but demands careful PCB layout, substrate design, and thermal planning because of its large ball count and substantial I/O bandwidth.
The device combines hard processor logic with a Kintex-7 FPGA fabric. The processor subsystem executes operating-system or bare-metal software, while the programmable fabric can implement parallel data paths, custom interfaces, accelerators, or protocol logic. This division of work allows software to control system behavior while FPGA logic handles timing-critical operations. Migration between the -1 and -2 speed grades can simplify product planning because the listed device identifiers use the same FBG676 package family, although the processor frequency changes from 667 MHz to 800 MHz.
Typical applications include industrial vision, high-speed data acquisition, network appliances, programmable logic controllers, test and measurement equipment, embedded control systems, and communications infrastructure. The dual-core ARM subsystem supports concurrent control-plane and data-plane software, while the FPGA fabric accelerates parallel processing and reduces external component count. These applications benefit from programmable hardware, deterministic I/O behavior, and integrated debug visibility.
PCB implementation is the dominant hardware consideration. A 676-FCBGA device requires a matched ball pattern, controlled impedance routing, adequate power and ground planes, decoupling close to supply pins, and assembly processes capable of handling the package pitch and thermal requirements. Engineers should use the AMD package placement diagram and the official Zynq-7000 pinout files when assigning board layers and verifying escape routing before schematic capture is released for fabrication.
This product overview combines the device identity, package constraints, speed-grade differences, and practical implementation considerations with verified family alternatives. It also identifies which electrical, thermal, and pin-level attributes require confirmation from AMD documentation before layout release, helping engineers distinguish confirmed product facts from parameters that still need direct design review.
এর জন্য ড্রপ-ইন বিকল্প XC7Z030-1FBG676I — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible XC7Z030-1FBG676I (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Programmable Logic, Operating Temperature, Processor Architecture, Mounting Type.
XC7Z030-2FBG676I
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XC7Z030-1FBG676C
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XC7Z030-1FFG676C
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XC7Z030-2FFG676I
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XC7Z030-1FBV676I
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
XC7Z030-1FBG676I সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Device Type | Zynq-7000 Kintex-7 system-on-chip |
| FPGA Logic Cells | 125K logic cells |
| Processor Cores | 2 ARM Cortex-A9 cores |
| Processor Architecture | 32-bit ARM Cortex-A9 MPCore |
| Maximum Processor Frequency | 667 MHz |
| Processor Instruction Set | Thumb-2 |
| Programmable Logic | Kintex-7 FPGA fabric |
| Debug Support | CoreSight |
| Package Type | 676-FCBGA (27 x 27 mm) |
| Package Pin Count | 676 balls |
| মাউন্টিং টাইপ | Surface mount |
| Speed Grade | -1 |
| Temperature Grade | Industrial, I suffix |
| I/O Supply Values | 1.2 V and 3.3 V |
XC7Z030-1FBG676I 676 balls পিন কনফিগারেশন গাইড
XC7Z030-1FBG676I (676 balls প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি XC7Z030-1FBG676I.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
XC7Z030-1FBG676I এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Machine Vision, High-Speed Data Acquisition, Programmable Logic Controller, Communications Network Appliance, Test and Measurement Equipment, Embedded Control System.
Industrial Machine Vision
The XC7Z030-1FBG676I suits machine-vision controllers that must combine image or sensor processing with deterministic control. Its dual ARM Cortex-A9 cores at 667 MHz can run camera control, communication, and system management software, while the 125K-cell Kintex-7 fabric can accelerate pixel pipelines, implement trigger logic, or handle parallel sensor interfaces. The 676-FCBGA package provides the pin density needed for external memory and high-speed I/O, although the design requires a substrate and PCB capable of supporting the ball pitch. For production use, engineers should verify the available DDR memory interfaces, supported I/O standards, power rails, and thermal performance against the AMD XC7Z030-XC7Z045 data sheet ds191 before finalizing the camera pipeline.
সুপারিশকৃত
High-Speed Data Acquisition
The XC7Z030-1FBG676I is appropriate for acquisition systems that divide work between real-time FPGA logic and higher-level control software. The 125K Kintex-7 cells can implement parallel ADCs, counters, digital filters, packetizers, or buffer-management functions, while the dual Cortex-A9 subsystem handles configuration, calibration, storage, and network communication. Its 667 MHz processor clock provides dedicated control capacity without assigning every sequential task to the programmable fabric. The principal engineering constraint is power and signal integrity: the 676-FCBGA device needs dense decoupling, controlled-impedance routing, careful memory topology, and a thermal solution validated at maximum acquisition activity rather than idle conditions.
সুপারিশকৃত
Programmable Logic Controller
The XC7Z030-1FBG676I provides a modern alternative to a discrete PLC controller when deterministic I/O and programmable hardware are required. The Kintex-7 fabric can implement timing-critical input capture, encoder processing, motion sequencing, or custom fieldbus functions, while the two ARM Cortex-A9 cores run application logic, diagnostics, and communications. Its 125K logic cells provide substantial parallel processing capacity, and the -1 grade runs the processor at 667 MHz for control workloads that do not require the XC7Z030-2FBG676I's 800 MHz rating. Deployment in machinery should include thermal and EMC validation, deterministic boot behavior, safe-state I/O design, and recovery planning for software and programmable-bitstream updates.
সুপারিশকৃত
Communications Network Appliance
XC7Z030-1FBG676I can serve as the processing heart of a network appliance that needs adaptable packet handling alongside a conventional control plane. The ARM Cortex-A9 subsystem can run network services, management interfaces, or protocol stacks, while the FPGA fabric can implement parallel classifiers, compression, encryption acceleration, or custom interface logic. Its 125K logic cells and 676-ball package provide a useful combination of density and I/O capability for products that evolve across hardware revisions. The design must carefully partition time-critical traffic into the fabric, preserve deterministic latency, and provide independent recovery paths for the processor and programmable configuration. Thermal testing should include sustained packet throughput because activity-dependent power can exceed assumptions based on processor utilization alone.
সুপারিশকৃত
Test and Measurement Equipment
The XC7Z030-1FBG676I is useful in instrumentation that combines flexible signal acquisition with a sophisticated user interface. Programmable logic can execute waveform capture, digital pattern generation, timing analysis, or protocol conversion, while the dual Cortex-A9 cores handle instrument control, calibration, data analysis, and graphical or networked interfaces. The 667 MHz processor clock supports operating-system-based control, and the 125K-cell fabric allows measurement algorithms to evolve without changing the board. A practical implementation should isolate analog and sensitive clock paths from the SoC, use the AMD placement and pinout documentation to assign power and ground balls correctly, and model FPGA, DDR, and processor power together when defining the cooling system for long-duration measurements.
সুপারিশকৃত
Embedded Control System
The XC7Z030-1FBG676I supports embedded control systems where an application processor must coexist with hardware-specific logic. The ARM cores can run a real-time operating system, device management, networking, and diagnostics, while the programmable fabric handles proprietary interfaces, motion sequencing, or safety-related monitoring. Its 125K logic cells allow substantial custom hardware to be consolidated into the SoC, and the 676-FCBGA offers extensive connectivity for external memory and I/O. Engineers should treat software isolation, watchdog behavior, configuration security, and controlled upgrade procedures as first-class design requirements. Board validation must include startup sequencing, brownout behavior, thermal cycling, and fault recovery because an integrated programmable device concentrates multiple functions into one high-density package.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা XC7Z030-1FBG676I — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
Review XC7Z030-1FBG676C when environmental requirements permit the commercial temperature class; it retains the 667 MHz speed grade but changes the temperature suffix. Consider XC7Z030-1FFG676C or XC7Z030-2FFG676I only after comparing the exact FFG package placement against FBG676. XC7Z030-1FBV676I requires confirmation of its package-specific electrical assignments and device details.
No direct cross-brand substitute preserves the AMD Zynq toolchain, processor subsystem, FPGA fabric, and 676-ball interface simultaneously. Treat competitor devices as redesign candidates rather than drop-in replacements.
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | XC7Z030-2FBG676I | XC7Z030-1FBG676C | XC7Z030-1FFG676C | XC7Z030-2FFG676I | XC7Z030-1FBV676I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-FCBGA (27 x 27 mm) | 676-FCBGA (27 x 27 mm) | 676-FCBGA (27 x 27 mm) | 676-FCBGA; package placement must be confirmed | 676-FCBGA; package placement must be confirmed | 676-FCBGA; package placement must be confirmed |
| Temperature Grade | Industrial, I suffix | Industrial, I suffix | Commercial, C suffix | Commercial, C suffix | Industrial, I suffix | Industrial, I suffix |
| Speed Grade | -1 | -2 | -1 | -1 | -2 | -1 |
মূল পার্থক্যসমূহ
- Lower speed grade than the -2 alternative (বনামXC7Z030-2FBG676I)
- Industrial temperature suffix for extended-environment designs (বনামXC7Z030-1FBG676C)
- Original FBG676 package identifier (বনামXC7Z030-1FFG676C)
- Dual-core processing with programmable logic in one package (বনামXC7Z030-1FBV676I)
ডিজাইন নোট
Start the board design from the AMD XC7Z30-FBG676/FFG676 package placement diagram rather than a generic 676-ball BGA outline. Assign every power, ground, configuration, memory, and processor signal directly from the official package files, then cross-check the schematic against the Zynq-7000 package pinout resources. This is critical for FFG and FBG ordering codes because the shared 676-ball format does not by itself guarantee identical ball assignments.
Build the power tree for processor, FPGA, memory, and I/O domains separately, then validate startup sequencing and steady-state current using the device's worst-case activity tables. Place decoupling capacitance close to the relevant supply balls and confirm the selected PCB stack-up supports the required layer transitions and current density. If XC7Z030-2FBG676I is substituted for the -1 grade, repeat power and thermal analysis because the 800 MHz processor rating can increase dynamic consumption.
Estimate junction temperature from total SoC, memory, and regulator dissipation rather than FPGA logic-cell utilization alone. Processor activity, DDR traffic, I/O loading, and speed grade can materially change the heat generated by XC7Z030-1FBG676I. Use the AMD power and thermal limits from the XC7Z030-XC7Z045 data sheet, then validate the assembled board with forced-air and enclosure conditions representative of the final product.
Treat DDR memory and other high-speed interfaces as constrained distributed systems. Follow the AMD routing and topology guidance, maintain continuous reference planes where required, control impedance on the chosen stack-up, and avoid splitting return paths beneath active signal layers. Validate the final design with the appropriate signal-integrity simulation and measurement tools because small package, layer-transition, and via differences can materially affect eye margins.
Do not treat a shared 676-FCBGA outline as proof that every FBG676 or FFG676 ordering code is a qualified drop-in replacement. Compare AMD placement diagrams, pinout files, power requirements, speed limits, and temperature ranges for the exact alternate. In particular, the C and I suffixes change environmental suitability, while the -1 and -2 suffixes change processor performance and potentially power and timing margins.
কমপ্লায়েন্স তথ্য
The exact ordering code is industrial-temperature identified, but no RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified in the cited product information. Confirm compliance with AMD for the current production configuration.